xref: /openbmc/linux/drivers/reset/Kconfig (revision b60a5b8d) 
1config ARCH_HAS_RESET_CONTROLLER
2	bool
3
4menuconfig RESET_CONTROLLER
5	bool "Reset Controller Support"
6	default y if ARCH_HAS_RESET_CONTROLLER
7	help
8	  Generic Reset Controller support.
9
10	  This framework is designed to abstract reset handling of devices
11	  via GPIOs or SoC-internal reset controller modules.
12
13	  If unsure, say no.
14
15if RESET_CONTROLLER
16
17config RESET_A10SR
18	tristate "Altera Arria10 System Resource Reset"
19	depends on MFD_ALTERA_A10SR
20	help
21	  This option enables support for the external reset functions for
22	  peripheral PHYs on the Altera Arria10 System Resource Chip.
23
24config RESET_ATH79
25	bool "AR71xx Reset Driver" if COMPILE_TEST
26	default ATH79
27	help
28	  This enables the ATH79 reset controller driver that supports the
29	  AR71xx SoC reset controller.
30
31config RESET_AXS10X
32	bool "AXS10x Reset Driver" if COMPILE_TEST
33	default ARC_PLAT_AXS10X
34	help
35	  This enables the reset controller driver for AXS10x.
36
37config RESET_BERLIN
38	bool "Berlin Reset Driver" if COMPILE_TEST
39	default ARCH_BERLIN
40	help
41	  This enables the reset controller driver for Marvell Berlin SoCs.
42
43config RESET_BRCMSTB
44	tristate "Broadcom STB reset controller"
45	depends on ARCH_BRCMSTB || COMPILE_TEST
46	default ARCH_BRCMSTB
47	help
48	  This enables the reset controller driver for Broadcom STB SoCs using
49	  a SUN_TOP_CTRL_SW_INIT style controller.
50
51config RESET_HSDK
52	bool "Synopsys HSDK Reset Driver"
53	depends on HAS_IOMEM
54	depends on ARC_SOC_HSDK || COMPILE_TEST
55	help
56	  This enables the reset controller driver for HSDK board.
57
58config RESET_IMX7
59	bool "i.MX7/8 Reset Driver" if COMPILE_TEST
60	depends on HAS_IOMEM
61	default SOC_IMX7D || (ARM64 && ARCH_MXC)
62	select MFD_SYSCON
63	help
64	  This enables the reset controller driver for i.MX7 SoCs.
65
66config RESET_LANTIQ
67	bool "Lantiq XWAY Reset Driver" if COMPILE_TEST
68	default SOC_TYPE_XWAY
69	help
70	  This enables the reset controller driver for Lantiq / Intel XWAY SoCs.
71
72config RESET_LPC18XX
73	bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
74	default ARCH_LPC18XX
75	help
76	  This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
77
78config RESET_MESON
79	bool "Meson Reset Driver" if COMPILE_TEST
80	default ARCH_MESON
81	help
82	  This enables the reset driver for Amlogic Meson SoCs.
83
84config RESET_MESON_AUDIO_ARB
85	tristate "Meson Audio Memory Arbiter Reset Driver"
86	depends on ARCH_MESON || COMPILE_TEST
87	help
88	  This enables the reset driver for Audio Memory Arbiter of
89	  Amlogic's A113 based SoCs
90
91config RESET_OXNAS
92	bool
93
94config RESET_PISTACHIO
95	bool "Pistachio Reset Driver" if COMPILE_TEST
96	default MACH_PISTACHIO
97	help
98	  This enables the reset driver for ImgTec Pistachio SoCs.
99
100config RESET_QCOM_AOSS
101	bool "Qcom AOSS Reset Driver"
102	depends on ARCH_QCOM || COMPILE_TEST
103	help
104	  This enables the AOSS (always on subsystem) reset driver
105	  for Qualcomm SDM845 SoCs. Say Y if you want to control
106	  reset signals provided by AOSS for Modem, Venus, ADSP,
107	  GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
108
109config RESET_QCOM_PDC
110	tristate "Qualcomm PDC Reset Driver"
111	depends on ARCH_QCOM || COMPILE_TEST
112	help
113	  This enables the PDC (Power Domain Controller) reset driver
114	  for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want
115	  to control reset signals provided by PDC for Modem, Compute,
116	  Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
117
118config RESET_SIMPLE
119	bool "Simple Reset Controller Driver" if COMPILE_TEST
120	default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
121	help
122	  This enables a simple reset controller driver for reset lines that
123	  that can be asserted and deasserted by toggling bits in a contiguous,
124	  exclusive register space.
125
126	  Currently this driver supports:
127	   - Altera SoCFPGAs
128	   - ASPEED BMC SoCs
129	   - RCC reset controller in STM32 MCUs
130	   - Allwinner SoCs
131	   - ZTE's zx2967 family
132
133config RESET_STM32MP157
134	bool "STM32MP157 Reset Driver" if COMPILE_TEST
135	default MACH_STM32MP157
136	help
137	  This enables the RCC reset controller driver for STM32 MPUs.
138
139config RESET_SOCFPGA
140	bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA
141	default ARCH_SOCFPGA
142	select RESET_SIMPLE
143	help
144	  This enables the reset driver for the SoCFPGA ARMv7 platforms. This
145	  driver gets initialized early during platform init calls.
146
147config RESET_SUNXI
148	bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
149	default ARCH_SUNXI
150	select RESET_SIMPLE
151	help
152	  This enables the reset driver for Allwinner SoCs.
153
154config RESET_TI_SCI
155	tristate "TI System Control Interface (TI-SCI) reset driver"
156	depends on TI_SCI_PROTOCOL
157	help
158	  This enables the reset driver support over TI System Control Interface
159	  available on some new TI's SoCs. If you wish to use reset resources
160	  managed by the TI System Controller, say Y here. Otherwise, say N.
161
162config RESET_TI_SYSCON
163	tristate "TI SYSCON Reset Driver"
164	depends on HAS_IOMEM
165	select MFD_SYSCON
166	help
167	  This enables the reset driver support for TI devices with
168	  memory-mapped reset registers as part of a syscon device node. If
169	  you wish to use the reset framework for such memory-mapped devices,
170	  say Y here. Otherwise, say N.
171
172config RESET_UNIPHIER
173	tristate "Reset controller driver for UniPhier SoCs"
174	depends on ARCH_UNIPHIER || COMPILE_TEST
175	depends on OF && MFD_SYSCON
176	default ARCH_UNIPHIER
177	help
178	  Support for reset controllers on UniPhier SoCs.
179	  Say Y if you want to control reset signals provided by System Control
180	  block, Media I/O block, Peripheral Block.
181
182config RESET_UNIPHIER_GLUE
183	tristate "Reset driver in glue layer for UniPhier SoCs"
184	depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
185	default ARCH_UNIPHIER
186	select RESET_SIMPLE
187	help
188	  Support for peripheral core reset included in its own glue layer
189	  on UniPhier SoCs. Say Y if you want to control reset signals
190	  provided by the glue layer.
191
192config RESET_ZYNQ
193	bool "ZYNQ Reset Driver" if COMPILE_TEST
194	default ARCH_ZYNQ
195	help
196	  This enables the reset controller driver for Xilinx Zynq SoCs.
197
198source "drivers/reset/sti/Kconfig"
199source "drivers/reset/hisilicon/Kconfig"
200source "drivers/reset/tegra/Kconfig"
201
202endif
203