1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * SLIM core rproc driver
4  *
5  * Copyright (C) 2016 STMicroelectronics
6  *
7  * Author: Peter Griffin <peter.griffin@linaro.org>
8  */
9 
10 #include <linux/clk.h>
11 #include <linux/err.h>
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/of_device.h>
16 #include <linux/platform_device.h>
17 #include <linux/remoteproc.h>
18 #include <linux/remoteproc/st_slim_rproc.h>
19 #include "remoteproc_internal.h"
20 
21 /* SLIM core registers */
22 #define SLIM_ID_OFST		0x0
23 #define SLIM_VER_OFST		0x4
24 
25 #define SLIM_EN_OFST		0x8
26 #define SLIM_EN_RUN			BIT(0)
27 
28 #define SLIM_CLK_GATE_OFST	0xC
29 #define SLIM_CLK_GATE_DIS		BIT(0)
30 #define SLIM_CLK_GATE_RESET		BIT(2)
31 
32 #define SLIM_SLIM_PC_OFST	0x20
33 
34 /* DMEM registers */
35 #define SLIM_REV_ID_OFST	0x0
36 #define SLIM_REV_ID_MIN_MASK		GENMASK(15, 8)
37 #define SLIM_REV_ID_MIN(id)		((id & SLIM_REV_ID_MIN_MASK) >> 8)
38 #define SLIM_REV_ID_MAJ_MASK		GENMASK(23, 16)
39 #define SLIM_REV_ID_MAJ(id)		((id & SLIM_REV_ID_MAJ_MASK) >> 16)
40 
41 
42 /* peripherals registers */
43 #define SLIM_STBUS_SYNC_OFST	0xF88
44 #define SLIM_STBUS_SYNC_DIS		BIT(0)
45 
46 #define SLIM_INT_SET_OFST	0xFD4
47 #define SLIM_INT_CLR_OFST	0xFD8
48 #define SLIM_INT_MASK_OFST	0xFDC
49 
50 #define SLIM_CMD_CLR_OFST	0xFC8
51 #define SLIM_CMD_MASK_OFST	0xFCC
52 
53 static const char *mem_names[ST_SLIM_MEM_MAX] = {
54 	[ST_SLIM_DMEM]	= "dmem",
55 	[ST_SLIM_IMEM]	= "imem",
56 };
57 
58 static int slim_clk_get(struct st_slim_rproc *slim_rproc, struct device *dev)
59 {
60 	int clk, err;
61 
62 	for (clk = 0; clk < ST_SLIM_MAX_CLK; clk++) {
63 		slim_rproc->clks[clk] = of_clk_get(dev->of_node, clk);
64 		if (IS_ERR(slim_rproc->clks[clk])) {
65 			err = PTR_ERR(slim_rproc->clks[clk]);
66 			if (err == -EPROBE_DEFER)
67 				goto err_put_clks;
68 			slim_rproc->clks[clk] = NULL;
69 			break;
70 		}
71 	}
72 
73 	return 0;
74 
75 err_put_clks:
76 	while (--clk >= 0)
77 		clk_put(slim_rproc->clks[clk]);
78 
79 	return err;
80 }
81 
82 static void slim_clk_disable(struct st_slim_rproc *slim_rproc)
83 {
84 	int clk;
85 
86 	for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++)
87 		clk_disable_unprepare(slim_rproc->clks[clk]);
88 }
89 
90 static int slim_clk_enable(struct st_slim_rproc *slim_rproc)
91 {
92 	int clk, ret;
93 
94 	for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) {
95 		ret = clk_prepare_enable(slim_rproc->clks[clk]);
96 		if (ret)
97 			goto err_disable_clks;
98 	}
99 
100 	return 0;
101 
102 err_disable_clks:
103 	while (--clk >= 0)
104 		clk_disable_unprepare(slim_rproc->clks[clk]);
105 
106 	return ret;
107 }
108 
109 /*
110  * Remoteproc slim specific device handlers
111  */
112 static int slim_rproc_start(struct rproc *rproc)
113 {
114 	struct device *dev = &rproc->dev;
115 	struct st_slim_rproc *slim_rproc = rproc->priv;
116 	unsigned long hw_id, hw_ver, fw_rev;
117 	u32 val;
118 
119 	/* disable CPU pipeline clock & reset CPU pipeline */
120 	val = SLIM_CLK_GATE_DIS | SLIM_CLK_GATE_RESET;
121 	writel(val, slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
122 
123 	/* disable SLIM core STBus sync */
124 	writel(SLIM_STBUS_SYNC_DIS, slim_rproc->peri + SLIM_STBUS_SYNC_OFST);
125 
126 	/* enable cpu pipeline clock */
127 	writel(!SLIM_CLK_GATE_DIS,
128 		slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
129 
130 	/* clear int & cmd mailbox */
131 	writel(~0U, slim_rproc->peri + SLIM_INT_CLR_OFST);
132 	writel(~0U, slim_rproc->peri + SLIM_CMD_CLR_OFST);
133 
134 	/* enable all channels cmd & int */
135 	writel(~0U, slim_rproc->peri + SLIM_INT_MASK_OFST);
136 	writel(~0U, slim_rproc->peri + SLIM_CMD_MASK_OFST);
137 
138 	/* enable cpu */
139 	writel(SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST);
140 
141 	hw_id = readl_relaxed(slim_rproc->slimcore + SLIM_ID_OFST);
142 	hw_ver = readl_relaxed(slim_rproc->slimcore + SLIM_VER_OFST);
143 
144 	fw_rev = readl(slim_rproc->mem[ST_SLIM_DMEM].cpu_addr +
145 			SLIM_REV_ID_OFST);
146 
147 	dev_info(dev, "fw rev:%ld.%ld on SLIM %ld.%ld\n",
148 		 SLIM_REV_ID_MAJ(fw_rev), SLIM_REV_ID_MIN(fw_rev),
149 		 hw_id, hw_ver);
150 
151 	return 0;
152 }
153 
154 static int slim_rproc_stop(struct rproc *rproc)
155 {
156 	struct st_slim_rproc *slim_rproc = rproc->priv;
157 	u32 val;
158 
159 	/* mask all (cmd & int) channels */
160 	writel(0UL, slim_rproc->peri + SLIM_INT_MASK_OFST);
161 	writel(0UL, slim_rproc->peri + SLIM_CMD_MASK_OFST);
162 
163 	/* disable cpu pipeline clock */
164 	writel(SLIM_CLK_GATE_DIS, slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
165 
166 	writel(!SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST);
167 
168 	val = readl(slim_rproc->slimcore + SLIM_EN_OFST);
169 	if (val & SLIM_EN_RUN)
170 		dev_warn(&rproc->dev, "Failed to disable SLIM");
171 
172 	dev_dbg(&rproc->dev, "slim stopped\n");
173 
174 	return 0;
175 }
176 
177 static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
178 {
179 	struct st_slim_rproc *slim_rproc = rproc->priv;
180 	void *va = NULL;
181 	int i;
182 
183 	for (i = 0; i < ST_SLIM_MEM_MAX; i++) {
184 		if (da != slim_rproc->mem[i].bus_addr)
185 			continue;
186 
187 		if (len <= slim_rproc->mem[i].size) {
188 			/* __force to make sparse happy with type conversion */
189 			va = (__force void *)slim_rproc->mem[i].cpu_addr;
190 			break;
191 		}
192 	}
193 
194 	dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%x va = 0x%pK\n",
195 		da, len, va);
196 
197 	return va;
198 }
199 
200 static const struct rproc_ops slim_rproc_ops = {
201 	.start		= slim_rproc_start,
202 	.stop		= slim_rproc_stop,
203 	.da_to_va       = slim_rproc_da_to_va,
204 	.get_boot_addr	= rproc_elf_get_boot_addr,
205 	.load		= rproc_elf_load_segments,
206 	.sanity_check	= rproc_elf_sanity_check,
207 };
208 
209 /**
210  * st_slim_rproc_alloc() - allocate and initialise slim rproc
211  * @pdev: Pointer to the platform_device struct
212  * @fw_name: Name of firmware for rproc to use
213  *
214  * Function for allocating and initialising a slim rproc for use by
215  * device drivers whose IP is based around the SLIM core. It
216  * obtains and enables any clocks required by the SLIM core and also
217  * ioremaps the various IO.
218  *
219  * Returns st_slim_rproc pointer or PTR_ERR() on error.
220  */
221 
222 struct st_slim_rproc *st_slim_rproc_alloc(struct platform_device *pdev,
223 				char *fw_name)
224 {
225 	struct device *dev = &pdev->dev;
226 	struct st_slim_rproc *slim_rproc;
227 	struct device_node *np = dev->of_node;
228 	struct rproc *rproc;
229 	struct resource *res;
230 	int err, i;
231 
232 	if (!fw_name)
233 		return ERR_PTR(-EINVAL);
234 
235 	if (!of_device_is_compatible(np, "st,slim-rproc"))
236 		return ERR_PTR(-EINVAL);
237 
238 	rproc = rproc_alloc(dev, np->name, &slim_rproc_ops,
239 			fw_name, sizeof(*slim_rproc));
240 	if (!rproc)
241 		return ERR_PTR(-ENOMEM);
242 
243 	rproc->has_iommu = false;
244 
245 	slim_rproc = rproc->priv;
246 	slim_rproc->rproc = rproc;
247 
248 	/* get imem and dmem */
249 	for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
250 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
251 						mem_names[i]);
252 
253 		slim_rproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
254 		if (IS_ERR(slim_rproc->mem[i].cpu_addr)) {
255 			dev_err(&pdev->dev, "devm_ioremap_resource failed\n");
256 			err = PTR_ERR(slim_rproc->mem[i].cpu_addr);
257 			goto err;
258 		}
259 		slim_rproc->mem[i].bus_addr = res->start;
260 		slim_rproc->mem[i].size = resource_size(res);
261 	}
262 
263 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "slimcore");
264 	slim_rproc->slimcore = devm_ioremap_resource(dev, res);
265 	if (IS_ERR(slim_rproc->slimcore)) {
266 		dev_err(&pdev->dev, "failed to ioremap slimcore IO\n");
267 		err = PTR_ERR(slim_rproc->slimcore);
268 		goto err;
269 	}
270 
271 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "peripherals");
272 	slim_rproc->peri = devm_ioremap_resource(dev, res);
273 	if (IS_ERR(slim_rproc->peri)) {
274 		dev_err(&pdev->dev, "failed to ioremap peripherals IO\n");
275 		err = PTR_ERR(slim_rproc->peri);
276 		goto err;
277 	}
278 
279 	err = slim_clk_get(slim_rproc, dev);
280 	if (err)
281 		goto err;
282 
283 	err = slim_clk_enable(slim_rproc);
284 	if (err) {
285 		dev_err(dev, "Failed to enable clocks\n");
286 		goto err_clk_put;
287 	}
288 
289 	/* Register as a remoteproc device */
290 	err = rproc_add(rproc);
291 	if (err) {
292 		dev_err(dev, "registration of slim remoteproc failed\n");
293 		goto err_clk_dis;
294 	}
295 
296 	return slim_rproc;
297 
298 err_clk_dis:
299 	slim_clk_disable(slim_rproc);
300 err_clk_put:
301 	for (i = 0; i < ST_SLIM_MAX_CLK && slim_rproc->clks[i]; i++)
302 		clk_put(slim_rproc->clks[i]);
303 err:
304 	rproc_free(rproc);
305 	return ERR_PTR(err);
306 }
307 EXPORT_SYMBOL(st_slim_rproc_alloc);
308 
309 /**
310   * st_slim_rproc_put() - put slim rproc resources
311   * @slim_rproc: Pointer to the st_slim_rproc struct
312   *
313   * Function for calling respective _put() functions on slim_rproc resources.
314   *
315   */
316 void st_slim_rproc_put(struct st_slim_rproc *slim_rproc)
317 {
318 	int clk;
319 
320 	if (!slim_rproc)
321 		return;
322 
323 	slim_clk_disable(slim_rproc);
324 
325 	for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++)
326 		clk_put(slim_rproc->clks[clk]);
327 
328 	rproc_del(slim_rproc->rproc);
329 	rproc_free(slim_rproc->rproc);
330 }
331 EXPORT_SYMBOL(st_slim_rproc_put);
332 
333 MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
334 MODULE_DESCRIPTION("STMicroelectronics SLIM core rproc driver");
335 MODULE_LICENSE("GPL v2");
336