1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * OMAP Remote Processor driver
4  *
5  * Copyright (C) 2011-2020 Texas Instruments Incorporated - http://www.ti.com/
6  * Copyright (C) 2011 Google, Inc.
7  *
8  * Ohad Ben-Cohen <ohad@wizery.com>
9  * Brian Swetland <swetland@google.com>
10  * Fernando Guzman Lugo <fernando.lugo@ti.com>
11  * Mark Grosen <mgrosen@ti.com>
12  * Suman Anna <s-anna@ti.com>
13  * Hari Kanigeri <h-kanigeri2@ti.com>
14  */
15 
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/clk.h>
19 #include <linux/clk/ti.h>
20 #include <linux/err.h>
21 #include <linux/io.h>
22 #include <linux/of_device.h>
23 #include <linux/of_reserved_mem.h>
24 #include <linux/platform_device.h>
25 #include <linux/pm_runtime.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/interrupt.h>
28 #include <linux/remoteproc.h>
29 #include <linux/mailbox_client.h>
30 #include <linux/omap-iommu.h>
31 #include <linux/omap-mailbox.h>
32 #include <linux/regmap.h>
33 #include <linux/mfd/syscon.h>
34 #include <linux/reset.h>
35 #include <clocksource/timer-ti-dm.h>
36 
37 #include <linux/platform_data/dmtimer-omap.h>
38 
39 #include "omap_remoteproc.h"
40 #include "remoteproc_internal.h"
41 
42 /* default auto-suspend delay (ms) */
43 #define DEFAULT_AUTOSUSPEND_DELAY		10000
44 
45 /**
46  * struct omap_rproc_boot_data - boot data structure for the DSP omap rprocs
47  * @syscon: regmap handle for the system control configuration module
48  * @boot_reg: boot register offset within the @syscon regmap
49  * @boot_reg_shift: bit-field shift required for the boot address value in
50  *		    @boot_reg
51  */
52 struct omap_rproc_boot_data {
53 	struct regmap *syscon;
54 	unsigned int boot_reg;
55 	unsigned int boot_reg_shift;
56 };
57 
58 /**
59  * struct omap_rproc_mem - internal memory structure
60  * @cpu_addr: MPU virtual address of the memory region
61  * @bus_addr: bus address used to access the memory region
62  * @dev_addr: device address of the memory region from DSP view
63  * @size: size of the memory region
64  */
65 struct omap_rproc_mem {
66 	void __iomem *cpu_addr;
67 	phys_addr_t bus_addr;
68 	u32 dev_addr;
69 	size_t size;
70 };
71 
72 /**
73  * struct omap_rproc_timer - data structure for a timer used by a omap rproc
74  * @odt: timer pointer
75  * @timer_ops: OMAP dmtimer ops for @odt timer
76  * @irq: timer irq
77  */
78 struct omap_rproc_timer {
79 	struct omap_dm_timer *odt;
80 	const struct omap_dm_timer_ops *timer_ops;
81 	int irq;
82 };
83 
84 /**
85  * struct omap_rproc - omap remote processor state
86  * @mbox: mailbox channel handle
87  * @client: mailbox client to request the mailbox channel
88  * @boot_data: boot data structure for setting processor boot address
89  * @mem: internal memory regions data
90  * @num_mems: number of internal memory regions
91  * @num_timers: number of rproc timer(s)
92  * @num_wd_timers: number of rproc watchdog timers
93  * @timers: timer(s) info used by rproc
94  * @autosuspend_delay: auto-suspend delay value to be used for runtime pm
95  * @need_resume: if true a resume is needed in the system resume callback
96  * @rproc: rproc handle
97  * @reset: reset handle
98  * @pm_comp: completion primitive to sync for suspend response
99  * @fck: functional clock for the remoteproc
100  * @suspend_acked: state machine flag to store the suspend request ack
101  */
102 struct omap_rproc {
103 	struct mbox_chan *mbox;
104 	struct mbox_client client;
105 	struct omap_rproc_boot_data *boot_data;
106 	struct omap_rproc_mem *mem;
107 	int num_mems;
108 	int num_timers;
109 	int num_wd_timers;
110 	struct omap_rproc_timer *timers;
111 	int autosuspend_delay;
112 	bool need_resume;
113 	struct rproc *rproc;
114 	struct reset_control *reset;
115 	struct completion pm_comp;
116 	struct clk *fck;
117 	bool suspend_acked;
118 };
119 
120 /**
121  * struct omap_rproc_mem_data - memory definitions for an omap remote processor
122  * @name: name for this memory entry
123  * @dev_addr: device address for the memory entry
124  */
125 struct omap_rproc_mem_data {
126 	const char *name;
127 	const u32 dev_addr;
128 };
129 
130 /**
131  * struct omap_rproc_dev_data - device data for the omap remote processor
132  * @device_name: device name of the remote processor
133  * @mems: memory definitions for this remote processor
134  */
135 struct omap_rproc_dev_data {
136 	const char *device_name;
137 	const struct omap_rproc_mem_data *mems;
138 };
139 
140 /**
141  * omap_rproc_request_timer() - request a timer for a remoteproc
142  * @dev: device requesting the timer
143  * @np: device node pointer to the desired timer
144  * @timer: handle to a struct omap_rproc_timer to return the timer handle
145  *
146  * This helper function is used primarily to request a timer associated with
147  * a remoteproc. The returned handle is stored in the .odt field of the
148  * @timer structure passed in, and is used to invoke other timer specific
149  * ops (like starting a timer either during device initialization or during
150  * a resume operation, or for stopping/freeing a timer).
151  *
152  * Return: 0 on success, otherwise an appropriate failure
153  */
154 static int omap_rproc_request_timer(struct device *dev, struct device_node *np,
155 				    struct omap_rproc_timer *timer)
156 {
157 	int ret;
158 
159 	timer->odt = timer->timer_ops->request_by_node(np);
160 	if (!timer->odt) {
161 		dev_err(dev, "request for timer node %p failed\n", np);
162 		return -EBUSY;
163 	}
164 
165 	ret = timer->timer_ops->set_source(timer->odt, OMAP_TIMER_SRC_SYS_CLK);
166 	if (ret) {
167 		dev_err(dev, "error setting OMAP_TIMER_SRC_SYS_CLK as source for timer node %p\n",
168 			np);
169 		timer->timer_ops->free(timer->odt);
170 		return ret;
171 	}
172 
173 	/* clean counter, remoteproc code will set the value */
174 	timer->timer_ops->set_load(timer->odt, 0);
175 
176 	return 0;
177 }
178 
179 /**
180  * omap_rproc_start_timer() - start a timer for a remoteproc
181  * @timer: handle to a OMAP rproc timer
182  *
183  * This helper function is used to start a timer associated with a remoteproc,
184  * obtained using the request_timer ops. The helper function needs to be
185  * invoked by the driver to start the timer (during device initialization)
186  * or to just resume the timer.
187  *
188  * Return: 0 on success, otherwise a failure as returned by DMTimer ops
189  */
190 static inline int omap_rproc_start_timer(struct omap_rproc_timer *timer)
191 {
192 	return timer->timer_ops->start(timer->odt);
193 }
194 
195 /**
196  * omap_rproc_stop_timer() - stop a timer for a remoteproc
197  * @timer: handle to a OMAP rproc timer
198  *
199  * This helper function is used to disable a timer associated with a
200  * remoteproc, and needs to be called either during a device shutdown
201  * or suspend operation. The separate helper function allows the driver
202  * to just stop a timer without having to release the timer during a
203  * suspend operation.
204  *
205  * Return: 0 on success, otherwise a failure as returned by DMTimer ops
206  */
207 static inline int omap_rproc_stop_timer(struct omap_rproc_timer *timer)
208 {
209 	return timer->timer_ops->stop(timer->odt);
210 }
211 
212 /**
213  * omap_rproc_release_timer() - release a timer for a remoteproc
214  * @timer: handle to a OMAP rproc timer
215  *
216  * This helper function is used primarily to release a timer associated
217  * with a remoteproc. The dmtimer will be available for other clients to
218  * use once released.
219  *
220  * Return: 0 on success, otherwise a failure as returned by DMTimer ops
221  */
222 static inline int omap_rproc_release_timer(struct omap_rproc_timer *timer)
223 {
224 	return timer->timer_ops->free(timer->odt);
225 }
226 
227 /**
228  * omap_rproc_get_timer_irq() - get the irq for a timer
229  * @timer: handle to a OMAP rproc timer
230  *
231  * This function is used to get the irq associated with a watchdog timer. The
232  * function is called by the OMAP remoteproc driver to register a interrupt
233  * handler to handle watchdog events on the remote processor.
234  *
235  * Return: irq id on success, otherwise a failure as returned by DMTimer ops
236  */
237 static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer)
238 {
239 	return timer->timer_ops->get_irq(timer->odt);
240 }
241 
242 /**
243  * omap_rproc_ack_timer_irq() - acknowledge a timer irq
244  * @timer: handle to a OMAP rproc timer
245  *
246  * This function is used to clear the irq associated with a watchdog timer. The
247  * The function is called by the OMAP remoteproc upon a watchdog event on the
248  * remote processor to clear the interrupt status of the watchdog timer.
249  */
250 static inline void omap_rproc_ack_timer_irq(struct omap_rproc_timer *timer)
251 {
252 	timer->timer_ops->write_status(timer->odt, OMAP_TIMER_INT_OVERFLOW);
253 }
254 
255 /**
256  * omap_rproc_watchdog_isr() - Watchdog ISR handler for remoteproc device
257  * @irq: IRQ number associated with a watchdog timer
258  * @data: IRQ handler data
259  *
260  * This ISR routine executes the required necessary low-level code to
261  * acknowledge a watchdog timer interrupt. There can be multiple watchdog
262  * timers associated with a rproc (like IPUs which have 2 watchdog timers,
263  * one per Cortex M3/M4 core), so a lookup has to be performed to identify
264  * the timer to acknowledge its interrupt.
265  *
266  * The function also invokes rproc_report_crash to report the watchdog event
267  * to the remoteproc driver core, to trigger a recovery.
268  *
269  * Return: IRQ_HANDLED on success, otherwise IRQ_NONE
270  */
271 static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data)
272 {
273 	struct rproc *rproc = data;
274 	struct omap_rproc *oproc = rproc->priv;
275 	struct device *dev = rproc->dev.parent;
276 	struct omap_rproc_timer *timers = oproc->timers;
277 	struct omap_rproc_timer *wd_timer = NULL;
278 	int num_timers = oproc->num_timers + oproc->num_wd_timers;
279 	int i;
280 
281 	for (i = oproc->num_timers; i < num_timers; i++) {
282 		if (timers[i].irq > 0 && irq == timers[i].irq) {
283 			wd_timer = &timers[i];
284 			break;
285 		}
286 	}
287 
288 	if (!wd_timer) {
289 		dev_err(dev, "invalid timer\n");
290 		return IRQ_NONE;
291 	}
292 
293 	omap_rproc_ack_timer_irq(wd_timer);
294 
295 	rproc_report_crash(rproc, RPROC_WATCHDOG);
296 
297 	return IRQ_HANDLED;
298 }
299 
300 /**
301  * omap_rproc_enable_timers() - enable the timers for a remoteproc
302  * @rproc: handle of a remote processor
303  * @configure: boolean flag used to acquire and configure the timer handle
304  *
305  * This function is used primarily to enable the timers associated with
306  * a remoteproc. The configure flag is provided to allow the driver to
307  * to either acquire and start a timer (during device initialization) or
308  * to just start a timer (during a resume operation).
309  *
310  * Return: 0 on success, otherwise an appropriate failure
311  */
312 static int omap_rproc_enable_timers(struct rproc *rproc, bool configure)
313 {
314 	int i;
315 	int ret = 0;
316 	struct platform_device *tpdev;
317 	struct dmtimer_platform_data *tpdata;
318 	const struct omap_dm_timer_ops *timer_ops;
319 	struct omap_rproc *oproc = rproc->priv;
320 	struct omap_rproc_timer *timers = oproc->timers;
321 	struct device *dev = rproc->dev.parent;
322 	struct device_node *np = NULL;
323 	int num_timers = oproc->num_timers + oproc->num_wd_timers;
324 
325 	if (!num_timers)
326 		return 0;
327 
328 	if (!configure)
329 		goto start_timers;
330 
331 	for (i = 0; i < num_timers; i++) {
332 		if (i < oproc->num_timers)
333 			np = of_parse_phandle(dev->of_node, "ti,timers", i);
334 		else
335 			np = of_parse_phandle(dev->of_node,
336 					      "ti,watchdog-timers",
337 					      (i - oproc->num_timers));
338 		if (!np) {
339 			ret = -ENXIO;
340 			dev_err(dev, "device node lookup for timer at index %d failed: %d\n",
341 				i < oproc->num_timers ? i :
342 				i - oproc->num_timers, ret);
343 			goto free_timers;
344 		}
345 
346 		tpdev = of_find_device_by_node(np);
347 		if (!tpdev) {
348 			ret = -ENODEV;
349 			dev_err(dev, "could not get timer platform device\n");
350 			goto put_node;
351 		}
352 
353 		tpdata = dev_get_platdata(&tpdev->dev);
354 		put_device(&tpdev->dev);
355 		if (!tpdata) {
356 			ret = -EINVAL;
357 			dev_err(dev, "dmtimer pdata structure NULL\n");
358 			goto put_node;
359 		}
360 
361 		timer_ops = tpdata->timer_ops;
362 		if (!timer_ops || !timer_ops->request_by_node ||
363 		    !timer_ops->set_source || !timer_ops->set_load ||
364 		    !timer_ops->free || !timer_ops->start ||
365 		    !timer_ops->stop || !timer_ops->get_irq ||
366 		    !timer_ops->write_status) {
367 			ret = -EINVAL;
368 			dev_err(dev, "device does not have required timer ops\n");
369 			goto put_node;
370 		}
371 
372 		timers[i].irq = -1;
373 		timers[i].timer_ops = timer_ops;
374 		ret = omap_rproc_request_timer(dev, np, &timers[i]);
375 		if (ret) {
376 			dev_err(dev, "request for timer %p failed: %d\n", np,
377 				ret);
378 			goto put_node;
379 		}
380 		of_node_put(np);
381 
382 		if (i >= oproc->num_timers) {
383 			timers[i].irq = omap_rproc_get_timer_irq(&timers[i]);
384 			if (timers[i].irq < 0) {
385 				dev_err(dev, "get_irq for timer %p failed: %d\n",
386 					np, timers[i].irq);
387 				ret = -EBUSY;
388 				goto free_timers;
389 			}
390 
391 			ret = request_irq(timers[i].irq,
392 					  omap_rproc_watchdog_isr, IRQF_SHARED,
393 					  "rproc-wdt", rproc);
394 			if (ret) {
395 				dev_err(dev, "error requesting irq for timer %p\n",
396 					np);
397 				omap_rproc_release_timer(&timers[i]);
398 				timers[i].odt = NULL;
399 				timers[i].timer_ops = NULL;
400 				timers[i].irq = -1;
401 				goto free_timers;
402 			}
403 		}
404 	}
405 
406 start_timers:
407 	for (i = 0; i < num_timers; i++) {
408 		ret = omap_rproc_start_timer(&timers[i]);
409 		if (ret) {
410 			dev_err(dev, "start timer %p failed failed: %d\n", np,
411 				ret);
412 			break;
413 		}
414 	}
415 	if (ret) {
416 		while (i >= 0) {
417 			omap_rproc_stop_timer(&timers[i]);
418 			i--;
419 		}
420 		goto put_node;
421 	}
422 	return 0;
423 
424 put_node:
425 	if (configure)
426 		of_node_put(np);
427 free_timers:
428 	while (i--) {
429 		if (i >= oproc->num_timers)
430 			free_irq(timers[i].irq, rproc);
431 		omap_rproc_release_timer(&timers[i]);
432 		timers[i].odt = NULL;
433 		timers[i].timer_ops = NULL;
434 		timers[i].irq = -1;
435 	}
436 
437 	return ret;
438 }
439 
440 /**
441  * omap_rproc_disable_timers() - disable the timers for a remoteproc
442  * @rproc: handle of a remote processor
443  * @configure: boolean flag used to release the timer handle
444  *
445  * This function is used primarily to disable the timers associated with
446  * a remoteproc. The configure flag is provided to allow the driver to
447  * to either stop and release a timer (during device shutdown) or to just
448  * stop a timer (during a suspend operation).
449  *
450  * Return: 0 on success or no timers
451  */
452 static int omap_rproc_disable_timers(struct rproc *rproc, bool configure)
453 {
454 	int i;
455 	struct omap_rproc *oproc = rproc->priv;
456 	struct omap_rproc_timer *timers = oproc->timers;
457 	int num_timers = oproc->num_timers + oproc->num_wd_timers;
458 
459 	if (!num_timers)
460 		return 0;
461 
462 	for (i = 0; i < num_timers; i++) {
463 		omap_rproc_stop_timer(&timers[i]);
464 		if (configure) {
465 			if (i >= oproc->num_timers)
466 				free_irq(timers[i].irq, rproc);
467 			omap_rproc_release_timer(&timers[i]);
468 			timers[i].odt = NULL;
469 			timers[i].timer_ops = NULL;
470 			timers[i].irq = -1;
471 		}
472 	}
473 
474 	return 0;
475 }
476 
477 /**
478  * omap_rproc_mbox_callback() - inbound mailbox message handler
479  * @client: mailbox client pointer used for requesting the mailbox channel
480  * @data: mailbox payload
481  *
482  * This handler is invoked by omap's mailbox driver whenever a mailbox
483  * message is received. Usually, the mailbox payload simply contains
484  * the index of the virtqueue that is kicked by the remote processor,
485  * and we let remoteproc core handle it.
486  *
487  * In addition to virtqueue indices, we also have some out-of-band values
488  * that indicates different events. Those values are deliberately very
489  * big so they don't coincide with virtqueue indices.
490  */
491 static void omap_rproc_mbox_callback(struct mbox_client *client, void *data)
492 {
493 	struct omap_rproc *oproc = container_of(client, struct omap_rproc,
494 						client);
495 	struct device *dev = oproc->rproc->dev.parent;
496 	const char *name = oproc->rproc->name;
497 	u32 msg = (u32)data;
498 
499 	dev_dbg(dev, "mbox msg: 0x%x\n", msg);
500 
501 	switch (msg) {
502 	case RP_MBOX_CRASH:
503 		/*
504 		 * remoteproc detected an exception, notify the rproc core.
505 		 * The remoteproc core will handle the recovery.
506 		 */
507 		dev_err(dev, "omap rproc %s crashed\n", name);
508 		rproc_report_crash(oproc->rproc, RPROC_FATAL_ERROR);
509 		break;
510 	case RP_MBOX_ECHO_REPLY:
511 		dev_info(dev, "received echo reply from %s\n", name);
512 		break;
513 	case RP_MBOX_SUSPEND_ACK:
514 	case RP_MBOX_SUSPEND_CANCEL:
515 		oproc->suspend_acked = msg == RP_MBOX_SUSPEND_ACK;
516 		complete(&oproc->pm_comp);
517 		break;
518 	default:
519 		if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG)
520 			return;
521 		if (msg > oproc->rproc->max_notifyid) {
522 			dev_dbg(dev, "dropping unknown message 0x%x", msg);
523 			return;
524 		}
525 		/* msg contains the index of the triggered vring */
526 		if (rproc_vq_interrupt(oproc->rproc, msg) == IRQ_NONE)
527 			dev_dbg(dev, "no message was found in vqid %d\n", msg);
528 	}
529 }
530 
531 /* kick a virtqueue */
532 static void omap_rproc_kick(struct rproc *rproc, int vqid)
533 {
534 	struct omap_rproc *oproc = rproc->priv;
535 	struct device *dev = rproc->dev.parent;
536 	int ret;
537 
538 	/* wake up the rproc before kicking it */
539 	ret = pm_runtime_get_sync(dev);
540 	if (WARN_ON(ret < 0)) {
541 		dev_err(dev, "pm_runtime_get_sync() failed during kick, ret = %d\n",
542 			ret);
543 		pm_runtime_put_noidle(dev);
544 		return;
545 	}
546 
547 	/* send the index of the triggered virtqueue in the mailbox payload */
548 	ret = mbox_send_message(oproc->mbox, (void *)vqid);
549 	if (ret < 0)
550 		dev_err(dev, "failed to send mailbox message, status = %d\n",
551 			ret);
552 
553 	pm_runtime_mark_last_busy(dev);
554 	pm_runtime_put_autosuspend(dev);
555 }
556 
557 /**
558  * omap_rproc_write_dsp_boot_addr() - set boot address for DSP remote processor
559  * @rproc: handle of a remote processor
560  *
561  * Set boot address for a supported DSP remote processor.
562  *
563  * Return: 0 on success, or -EINVAL if boot address is not aligned properly
564  */
565 static int omap_rproc_write_dsp_boot_addr(struct rproc *rproc)
566 {
567 	struct device *dev = rproc->dev.parent;
568 	struct omap_rproc *oproc = rproc->priv;
569 	struct omap_rproc_boot_data *bdata = oproc->boot_data;
570 	u32 offset = bdata->boot_reg;
571 	u32 value;
572 	u32 mask;
573 
574 	if (rproc->bootaddr & (SZ_1K - 1)) {
575 		dev_err(dev, "invalid boot address 0x%llx, must be aligned on a 1KB boundary\n",
576 			rproc->bootaddr);
577 		return -EINVAL;
578 	}
579 
580 	value = rproc->bootaddr >> bdata->boot_reg_shift;
581 	mask = ~(SZ_1K - 1) >> bdata->boot_reg_shift;
582 
583 	return regmap_update_bits(bdata->syscon, offset, mask, value);
584 }
585 
586 /*
587  * Power up the remote processor.
588  *
589  * This function will be invoked only after the firmware for this rproc
590  * was loaded, parsed successfully, and all of its resource requirements
591  * were met.
592  */
593 static int omap_rproc_start(struct rproc *rproc)
594 {
595 	struct omap_rproc *oproc = rproc->priv;
596 	struct device *dev = rproc->dev.parent;
597 	int ret;
598 	struct mbox_client *client = &oproc->client;
599 
600 	if (oproc->boot_data) {
601 		ret = omap_rproc_write_dsp_boot_addr(rproc);
602 		if (ret)
603 			return ret;
604 	}
605 
606 	client->dev = dev;
607 	client->tx_done = NULL;
608 	client->rx_callback = omap_rproc_mbox_callback;
609 	client->tx_block = false;
610 	client->knows_txdone = false;
611 
612 	oproc->mbox = mbox_request_channel(client, 0);
613 	if (IS_ERR(oproc->mbox)) {
614 		ret = -EBUSY;
615 		dev_err(dev, "mbox_request_channel failed: %ld\n",
616 			PTR_ERR(oproc->mbox));
617 		return ret;
618 	}
619 
620 	/*
621 	 * Ping the remote processor. this is only for sanity-sake;
622 	 * there is no functional effect whatsoever.
623 	 *
624 	 * Note that the reply will _not_ arrive immediately: this message
625 	 * will wait in the mailbox fifo until the remote processor is booted.
626 	 */
627 	ret = mbox_send_message(oproc->mbox, (void *)RP_MBOX_ECHO_REQUEST);
628 	if (ret < 0) {
629 		dev_err(dev, "mbox_send_message failed: %d\n", ret);
630 		goto put_mbox;
631 	}
632 
633 	ret = omap_rproc_enable_timers(rproc, true);
634 	if (ret) {
635 		dev_err(dev, "omap_rproc_enable_timers failed: %d\n", ret);
636 		goto put_mbox;
637 	}
638 
639 	ret = reset_control_deassert(oproc->reset);
640 	if (ret) {
641 		dev_err(dev, "reset control deassert failed: %d\n", ret);
642 		goto disable_timers;
643 	}
644 
645 	/*
646 	 * remote processor is up, so update the runtime pm status and
647 	 * enable the auto-suspend. The device usage count is incremented
648 	 * manually for balancing it for auto-suspend
649 	 */
650 	pm_runtime_set_active(dev);
651 	pm_runtime_use_autosuspend(dev);
652 	pm_runtime_get_noresume(dev);
653 	pm_runtime_enable(dev);
654 	pm_runtime_mark_last_busy(dev);
655 	pm_runtime_put_autosuspend(dev);
656 
657 	return 0;
658 
659 disable_timers:
660 	omap_rproc_disable_timers(rproc, true);
661 put_mbox:
662 	mbox_free_channel(oproc->mbox);
663 	return ret;
664 }
665 
666 /* power off the remote processor */
667 static int omap_rproc_stop(struct rproc *rproc)
668 {
669 	struct device *dev = rproc->dev.parent;
670 	struct omap_rproc *oproc = rproc->priv;
671 	int ret;
672 
673 	/*
674 	 * cancel any possible scheduled runtime suspend by incrementing
675 	 * the device usage count, and resuming the device. The remoteproc
676 	 * also needs to be woken up if suspended, to avoid the remoteproc
677 	 * OS to continue to remember any context that it has saved, and
678 	 * avoid potential issues in misindentifying a subsequent device
679 	 * reboot as a power restore boot
680 	 */
681 	ret = pm_runtime_get_sync(dev);
682 	if (ret < 0) {
683 		pm_runtime_put_noidle(dev);
684 		return ret;
685 	}
686 
687 	ret = reset_control_assert(oproc->reset);
688 	if (ret)
689 		goto out;
690 
691 	ret = omap_rproc_disable_timers(rproc, true);
692 	if (ret)
693 		goto enable_device;
694 
695 	mbox_free_channel(oproc->mbox);
696 
697 	/*
698 	 * update the runtime pm states and status now that the remoteproc
699 	 * has stopped
700 	 */
701 	pm_runtime_disable(dev);
702 	pm_runtime_dont_use_autosuspend(dev);
703 	pm_runtime_put_noidle(dev);
704 	pm_runtime_set_suspended(dev);
705 
706 	return 0;
707 
708 enable_device:
709 	reset_control_deassert(oproc->reset);
710 out:
711 	/* schedule the next auto-suspend */
712 	pm_runtime_mark_last_busy(dev);
713 	pm_runtime_put_autosuspend(dev);
714 	return ret;
715 }
716 
717 /**
718  * omap_rproc_da_to_va() - internal memory translation helper
719  * @rproc: remote processor to apply the address translation for
720  * @da: device address to translate
721  * @len: length of the memory buffer
722  *
723  * Custom function implementing the rproc .da_to_va ops to provide address
724  * translation (device address to kernel virtual address) for internal RAMs
725  * present in a DSP or IPU device). The translated addresses can be used
726  * either by the remoteproc core for loading, or by any rpmsg bus drivers.
727  *
728  * Return: translated virtual address in kernel memory space on success,
729  *         or NULL on failure.
730  */
731 static void *omap_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
732 {
733 	struct omap_rproc *oproc = rproc->priv;
734 	int i;
735 	u32 offset;
736 
737 	if (len <= 0)
738 		return NULL;
739 
740 	if (!oproc->num_mems)
741 		return NULL;
742 
743 	for (i = 0; i < oproc->num_mems; i++) {
744 		if (da >= oproc->mem[i].dev_addr && da + len <=
745 		    oproc->mem[i].dev_addr + oproc->mem[i].size) {
746 			offset = da - oproc->mem[i].dev_addr;
747 			/* __force to make sparse happy with type conversion */
748 			return (__force void *)(oproc->mem[i].cpu_addr +
749 						offset);
750 		}
751 	}
752 
753 	return NULL;
754 }
755 
756 static const struct rproc_ops omap_rproc_ops = {
757 	.start		= omap_rproc_start,
758 	.stop		= omap_rproc_stop,
759 	.kick		= omap_rproc_kick,
760 	.da_to_va	= omap_rproc_da_to_va,
761 };
762 
763 #ifdef CONFIG_PM
764 static bool _is_rproc_in_standby(struct omap_rproc *oproc)
765 {
766 	return ti_clk_is_in_standby(oproc->fck);
767 }
768 
769 /* 1 sec is long enough time to let the remoteproc side suspend the device */
770 #define DEF_SUSPEND_TIMEOUT 1000
771 static int _omap_rproc_suspend(struct rproc *rproc, bool auto_suspend)
772 {
773 	struct device *dev = rproc->dev.parent;
774 	struct omap_rproc *oproc = rproc->priv;
775 	unsigned long to = msecs_to_jiffies(DEF_SUSPEND_TIMEOUT);
776 	unsigned long ta = jiffies + to;
777 	u32 suspend_msg = auto_suspend ?
778 				RP_MBOX_SUSPEND_AUTO : RP_MBOX_SUSPEND_SYSTEM;
779 	int ret;
780 
781 	reinit_completion(&oproc->pm_comp);
782 	oproc->suspend_acked = false;
783 	ret = mbox_send_message(oproc->mbox, (void *)suspend_msg);
784 	if (ret < 0) {
785 		dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
786 		return ret;
787 	}
788 
789 	ret = wait_for_completion_timeout(&oproc->pm_comp, to);
790 	if (!oproc->suspend_acked)
791 		return -EBUSY;
792 
793 	/*
794 	 * The remoteproc side is returning the ACK message before saving the
795 	 * context, because the context saving is performed within a SYS/BIOS
796 	 * function, and it cannot have any inter-dependencies against the IPC
797 	 * layer. Also, as the SYS/BIOS needs to preserve properly the processor
798 	 * register set, sending this ACK or signalling the completion of the
799 	 * context save through a shared memory variable can never be the
800 	 * absolute last thing to be executed on the remoteproc side, and the
801 	 * MPU cannot use the ACK message as a sync point to put the remoteproc
802 	 * into reset. The only way to ensure that the remote processor has
803 	 * completed saving the context is to check that the module has reached
804 	 * STANDBY state (after saving the context, the SYS/BIOS executes the
805 	 * appropriate target-specific WFI instruction causing the module to
806 	 * enter STANDBY).
807 	 */
808 	while (!_is_rproc_in_standby(oproc)) {
809 		if (time_after(jiffies, ta))
810 			return -ETIME;
811 		schedule();
812 	}
813 
814 	ret = reset_control_assert(oproc->reset);
815 	if (ret) {
816 		dev_err(dev, "reset assert during suspend failed %d\n", ret);
817 		return ret;
818 	}
819 
820 	ret = omap_rproc_disable_timers(rproc, false);
821 	if (ret) {
822 		dev_err(dev, "disabling timers during suspend failed %d\n",
823 			ret);
824 		goto enable_device;
825 	}
826 
827 	/*
828 	 * IOMMUs would have to be disabled specifically for runtime suspend.
829 	 * They are handled automatically through System PM callbacks for
830 	 * regular system suspend
831 	 */
832 	if (auto_suspend) {
833 		ret = omap_iommu_domain_deactivate(rproc->domain);
834 		if (ret) {
835 			dev_err(dev, "iommu domain deactivate failed %d\n",
836 				ret);
837 			goto enable_timers;
838 		}
839 	}
840 
841 	return 0;
842 
843 enable_timers:
844 	/* ignore errors on re-enabling code */
845 	omap_rproc_enable_timers(rproc, false);
846 enable_device:
847 	reset_control_deassert(oproc->reset);
848 	return ret;
849 }
850 
851 static int _omap_rproc_resume(struct rproc *rproc, bool auto_suspend)
852 {
853 	struct device *dev = rproc->dev.parent;
854 	struct omap_rproc *oproc = rproc->priv;
855 	int ret;
856 
857 	/*
858 	 * IOMMUs would have to be enabled specifically for runtime resume.
859 	 * They would have been already enabled automatically through System
860 	 * PM callbacks for regular system resume
861 	 */
862 	if (auto_suspend) {
863 		ret = omap_iommu_domain_activate(rproc->domain);
864 		if (ret) {
865 			dev_err(dev, "omap_iommu activate failed %d\n", ret);
866 			goto out;
867 		}
868 	}
869 
870 	/* boot address could be lost after suspend, so restore it */
871 	if (oproc->boot_data) {
872 		ret = omap_rproc_write_dsp_boot_addr(rproc);
873 		if (ret) {
874 			dev_err(dev, "boot address restore failed %d\n", ret);
875 			goto suspend_iommu;
876 		}
877 	}
878 
879 	ret = omap_rproc_enable_timers(rproc, false);
880 	if (ret) {
881 		dev_err(dev, "enabling timers during resume failed %d\n", ret);
882 		goto suspend_iommu;
883 	}
884 
885 	ret = reset_control_deassert(oproc->reset);
886 	if (ret) {
887 		dev_err(dev, "reset deassert during resume failed %d\n", ret);
888 		goto disable_timers;
889 	}
890 
891 	return 0;
892 
893 disable_timers:
894 	omap_rproc_disable_timers(rproc, false);
895 suspend_iommu:
896 	if (auto_suspend)
897 		omap_iommu_domain_deactivate(rproc->domain);
898 out:
899 	return ret;
900 }
901 
902 static int __maybe_unused omap_rproc_suspend(struct device *dev)
903 {
904 	struct rproc *rproc = dev_get_drvdata(dev);
905 	struct omap_rproc *oproc = rproc->priv;
906 	int ret = 0;
907 
908 	mutex_lock(&rproc->lock);
909 	if (rproc->state == RPROC_OFFLINE)
910 		goto out;
911 
912 	if (rproc->state == RPROC_SUSPENDED)
913 		goto out;
914 
915 	if (rproc->state != RPROC_RUNNING) {
916 		ret = -EBUSY;
917 		goto out;
918 	}
919 
920 	ret = _omap_rproc_suspend(rproc, false);
921 	if (ret) {
922 		dev_err(dev, "suspend failed %d\n", ret);
923 		goto out;
924 	}
925 
926 	/*
927 	 * remoteproc is running at the time of system suspend, so remember
928 	 * it so as to wake it up during system resume
929 	 */
930 	oproc->need_resume = true;
931 	rproc->state = RPROC_SUSPENDED;
932 
933 out:
934 	mutex_unlock(&rproc->lock);
935 	return ret;
936 }
937 
938 static int __maybe_unused omap_rproc_resume(struct device *dev)
939 {
940 	struct rproc *rproc = dev_get_drvdata(dev);
941 	struct omap_rproc *oproc = rproc->priv;
942 	int ret = 0;
943 
944 	mutex_lock(&rproc->lock);
945 	if (rproc->state == RPROC_OFFLINE)
946 		goto out;
947 
948 	if (rproc->state != RPROC_SUSPENDED) {
949 		ret = -EBUSY;
950 		goto out;
951 	}
952 
953 	/*
954 	 * remoteproc was auto-suspended at the time of system suspend,
955 	 * so no need to wake-up the processor (leave it in suspended
956 	 * state, will be woken up during a subsequent runtime_resume)
957 	 */
958 	if (!oproc->need_resume)
959 		goto out;
960 
961 	ret = _omap_rproc_resume(rproc, false);
962 	if (ret) {
963 		dev_err(dev, "resume failed %d\n", ret);
964 		goto out;
965 	}
966 
967 	oproc->need_resume = false;
968 	rproc->state = RPROC_RUNNING;
969 
970 	pm_runtime_mark_last_busy(dev);
971 out:
972 	mutex_unlock(&rproc->lock);
973 	return ret;
974 }
975 
976 static int omap_rproc_runtime_suspend(struct device *dev)
977 {
978 	struct rproc *rproc = dev_get_drvdata(dev);
979 	struct omap_rproc *oproc = rproc->priv;
980 	int ret;
981 
982 	mutex_lock(&rproc->lock);
983 	if (rproc->state == RPROC_CRASHED) {
984 		dev_dbg(dev, "rproc cannot be runtime suspended when crashed!\n");
985 		ret = -EBUSY;
986 		goto out;
987 	}
988 
989 	if (WARN_ON(rproc->state != RPROC_RUNNING)) {
990 		dev_err(dev, "rproc cannot be runtime suspended when not running!\n");
991 		ret = -EBUSY;
992 		goto out;
993 	}
994 
995 	/*
996 	 * do not even attempt suspend if the remote processor is not
997 	 * idled for runtime auto-suspend
998 	 */
999 	if (!_is_rproc_in_standby(oproc)) {
1000 		ret = -EBUSY;
1001 		goto abort;
1002 	}
1003 
1004 	ret = _omap_rproc_suspend(rproc, true);
1005 	if (ret)
1006 		goto abort;
1007 
1008 	rproc->state = RPROC_SUSPENDED;
1009 	mutex_unlock(&rproc->lock);
1010 	return 0;
1011 
1012 abort:
1013 	pm_runtime_mark_last_busy(dev);
1014 out:
1015 	mutex_unlock(&rproc->lock);
1016 	return ret;
1017 }
1018 
1019 static int omap_rproc_runtime_resume(struct device *dev)
1020 {
1021 	struct rproc *rproc = dev_get_drvdata(dev);
1022 	int ret;
1023 
1024 	mutex_lock(&rproc->lock);
1025 	if (WARN_ON(rproc->state != RPROC_SUSPENDED)) {
1026 		dev_err(dev, "rproc cannot be runtime resumed if not suspended! state=%d\n",
1027 			rproc->state);
1028 		ret = -EBUSY;
1029 		goto out;
1030 	}
1031 
1032 	ret = _omap_rproc_resume(rproc, true);
1033 	if (ret) {
1034 		dev_err(dev, "runtime resume failed %d\n", ret);
1035 		goto out;
1036 	}
1037 
1038 	rproc->state = RPROC_RUNNING;
1039 out:
1040 	mutex_unlock(&rproc->lock);
1041 	return ret;
1042 }
1043 #endif /* CONFIG_PM */
1044 
1045 static const struct omap_rproc_mem_data ipu_mems[] = {
1046 	{ .name = "l2ram", .dev_addr = 0x20000000 },
1047 	{ },
1048 };
1049 
1050 static const struct omap_rproc_mem_data dra7_dsp_mems[] = {
1051 	{ .name = "l2ram", .dev_addr = 0x800000 },
1052 	{ .name = "l1pram", .dev_addr = 0xe00000 },
1053 	{ .name = "l1dram", .dev_addr = 0xf00000 },
1054 	{ },
1055 };
1056 
1057 static const struct omap_rproc_dev_data omap4_dsp_dev_data = {
1058 	.device_name	= "dsp",
1059 };
1060 
1061 static const struct omap_rproc_dev_data omap4_ipu_dev_data = {
1062 	.device_name	= "ipu",
1063 	.mems		= ipu_mems,
1064 };
1065 
1066 static const struct omap_rproc_dev_data omap5_dsp_dev_data = {
1067 	.device_name	= "dsp",
1068 };
1069 
1070 static const struct omap_rproc_dev_data omap5_ipu_dev_data = {
1071 	.device_name	= "ipu",
1072 	.mems		= ipu_mems,
1073 };
1074 
1075 static const struct omap_rproc_dev_data dra7_dsp_dev_data = {
1076 	.device_name	= "dsp",
1077 	.mems		= dra7_dsp_mems,
1078 };
1079 
1080 static const struct omap_rproc_dev_data dra7_ipu_dev_data = {
1081 	.device_name	= "ipu",
1082 	.mems		= ipu_mems,
1083 };
1084 
1085 static const struct of_device_id omap_rproc_of_match[] = {
1086 	{
1087 		.compatible     = "ti,omap4-dsp",
1088 		.data           = &omap4_dsp_dev_data,
1089 	},
1090 	{
1091 		.compatible     = "ti,omap4-ipu",
1092 		.data           = &omap4_ipu_dev_data,
1093 	},
1094 	{
1095 		.compatible     = "ti,omap5-dsp",
1096 		.data           = &omap5_dsp_dev_data,
1097 	},
1098 	{
1099 		.compatible     = "ti,omap5-ipu",
1100 		.data           = &omap5_ipu_dev_data,
1101 	},
1102 	{
1103 		.compatible     = "ti,dra7-dsp",
1104 		.data           = &dra7_dsp_dev_data,
1105 	},
1106 	{
1107 		.compatible     = "ti,dra7-ipu",
1108 		.data           = &dra7_ipu_dev_data,
1109 	},
1110 	{
1111 		/* end */
1112 	},
1113 };
1114 MODULE_DEVICE_TABLE(of, omap_rproc_of_match);
1115 
1116 static const char *omap_rproc_get_firmware(struct platform_device *pdev)
1117 {
1118 	const char *fw_name;
1119 	int ret;
1120 
1121 	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
1122 				      &fw_name);
1123 	if (ret)
1124 		return ERR_PTR(ret);
1125 
1126 	return fw_name;
1127 }
1128 
1129 static int omap_rproc_get_boot_data(struct platform_device *pdev,
1130 				    struct rproc *rproc)
1131 {
1132 	struct device_node *np = pdev->dev.of_node;
1133 	struct omap_rproc *oproc = rproc->priv;
1134 	const struct omap_rproc_dev_data *data;
1135 	int ret;
1136 
1137 	data = of_device_get_match_data(&pdev->dev);
1138 	if (!data)
1139 		return -ENODEV;
1140 
1141 	if (!of_property_read_bool(np, "ti,bootreg"))
1142 		return 0;
1143 
1144 	oproc->boot_data = devm_kzalloc(&pdev->dev, sizeof(*oproc->boot_data),
1145 					GFP_KERNEL);
1146 	if (!oproc->boot_data)
1147 		return -ENOMEM;
1148 
1149 	oproc->boot_data->syscon =
1150 			syscon_regmap_lookup_by_phandle(np, "ti,bootreg");
1151 	if (IS_ERR(oproc->boot_data->syscon)) {
1152 		ret = PTR_ERR(oproc->boot_data->syscon);
1153 		return ret;
1154 	}
1155 
1156 	if (of_property_read_u32_index(np, "ti,bootreg", 1,
1157 				       &oproc->boot_data->boot_reg)) {
1158 		dev_err(&pdev->dev, "couldn't get the boot register\n");
1159 		return -EINVAL;
1160 	}
1161 
1162 	of_property_read_u32_index(np, "ti,bootreg", 2,
1163 				   &oproc->boot_data->boot_reg_shift);
1164 
1165 	return 0;
1166 }
1167 
1168 static int omap_rproc_of_get_internal_memories(struct platform_device *pdev,
1169 					       struct rproc *rproc)
1170 {
1171 	struct omap_rproc *oproc = rproc->priv;
1172 	struct device *dev = &pdev->dev;
1173 	const struct omap_rproc_dev_data *data;
1174 	struct resource *res;
1175 	int num_mems;
1176 	int i;
1177 
1178 	data = of_device_get_match_data(dev);
1179 	if (!data)
1180 		return -ENODEV;
1181 
1182 	if (!data->mems)
1183 		return 0;
1184 
1185 	num_mems = of_property_count_elems_of_size(dev->of_node, "reg",
1186 						   sizeof(u32)) / 2;
1187 
1188 	oproc->mem = devm_kcalloc(dev, num_mems, sizeof(*oproc->mem),
1189 				  GFP_KERNEL);
1190 	if (!oproc->mem)
1191 		return -ENOMEM;
1192 
1193 	for (i = 0; data->mems[i].name; i++) {
1194 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
1195 						   data->mems[i].name);
1196 		if (!res) {
1197 			dev_err(dev, "no memory defined for %s\n",
1198 				data->mems[i].name);
1199 			return -ENOMEM;
1200 		}
1201 		oproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
1202 		if (IS_ERR(oproc->mem[i].cpu_addr)) {
1203 			dev_err(dev, "failed to parse and map %s memory\n",
1204 				data->mems[i].name);
1205 			return PTR_ERR(oproc->mem[i].cpu_addr);
1206 		}
1207 		oproc->mem[i].bus_addr = res->start;
1208 		oproc->mem[i].dev_addr = data->mems[i].dev_addr;
1209 		oproc->mem[i].size = resource_size(res);
1210 
1211 		dev_dbg(dev, "memory %8s: bus addr %pa size 0x%x va %pK da 0x%x\n",
1212 			data->mems[i].name, &oproc->mem[i].bus_addr,
1213 			oproc->mem[i].size, oproc->mem[i].cpu_addr,
1214 			oproc->mem[i].dev_addr);
1215 	}
1216 	oproc->num_mems = num_mems;
1217 
1218 	return 0;
1219 }
1220 
1221 #ifdef CONFIG_OMAP_REMOTEPROC_WATCHDOG
1222 static int omap_rproc_count_wdog_timers(struct device *dev)
1223 {
1224 	struct device_node *np = dev->of_node;
1225 	int ret;
1226 
1227 	ret = of_count_phandle_with_args(np, "ti,watchdog-timers", NULL);
1228 	if (ret <= 0) {
1229 		dev_dbg(dev, "device does not have watchdog timers, status = %d\n",
1230 			ret);
1231 		ret = 0;
1232 	}
1233 
1234 	return ret;
1235 }
1236 #else
1237 static int omap_rproc_count_wdog_timers(struct device *dev)
1238 {
1239 	return 0;
1240 }
1241 #endif
1242 
1243 static int omap_rproc_of_get_timers(struct platform_device *pdev,
1244 				    struct rproc *rproc)
1245 {
1246 	struct device_node *np = pdev->dev.of_node;
1247 	struct omap_rproc *oproc = rproc->priv;
1248 	struct device *dev = &pdev->dev;
1249 	int num_timers;
1250 
1251 	/*
1252 	 * Timer nodes are directly used in client nodes as phandles, so
1253 	 * retrieve the count using appropriate size
1254 	 */
1255 	oproc->num_timers = of_count_phandle_with_args(np, "ti,timers", NULL);
1256 	if (oproc->num_timers <= 0) {
1257 		dev_dbg(dev, "device does not have timers, status = %d\n",
1258 			oproc->num_timers);
1259 		oproc->num_timers = 0;
1260 	}
1261 
1262 	oproc->num_wd_timers = omap_rproc_count_wdog_timers(dev);
1263 
1264 	num_timers = oproc->num_timers + oproc->num_wd_timers;
1265 	if (num_timers) {
1266 		oproc->timers = devm_kcalloc(dev, num_timers,
1267 					     sizeof(*oproc->timers),
1268 					     GFP_KERNEL);
1269 		if (!oproc->timers)
1270 			return -ENOMEM;
1271 
1272 		dev_dbg(dev, "device has %d tick timers and %d watchdog timers\n",
1273 			oproc->num_timers, oproc->num_wd_timers);
1274 	}
1275 
1276 	return 0;
1277 }
1278 
1279 static int omap_rproc_probe(struct platform_device *pdev)
1280 {
1281 	struct device_node *np = pdev->dev.of_node;
1282 	struct omap_rproc *oproc;
1283 	struct rproc *rproc;
1284 	const char *firmware;
1285 	int ret;
1286 	struct reset_control *reset;
1287 
1288 	if (!np) {
1289 		dev_err(&pdev->dev, "only DT-based devices are supported\n");
1290 		return -ENODEV;
1291 	}
1292 
1293 	reset = devm_reset_control_array_get_exclusive(&pdev->dev);
1294 	if (IS_ERR(reset))
1295 		return PTR_ERR(reset);
1296 
1297 	firmware = omap_rproc_get_firmware(pdev);
1298 	if (IS_ERR(firmware))
1299 		return PTR_ERR(firmware);
1300 
1301 	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
1302 	if (ret) {
1303 		dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret);
1304 		return ret;
1305 	}
1306 
1307 	rproc = rproc_alloc(&pdev->dev, dev_name(&pdev->dev), &omap_rproc_ops,
1308 			    firmware, sizeof(*oproc));
1309 	if (!rproc)
1310 		return -ENOMEM;
1311 
1312 	oproc = rproc->priv;
1313 	oproc->rproc = rproc;
1314 	oproc->reset = reset;
1315 	/* All existing OMAP IPU and DSP processors have an MMU */
1316 	rproc->has_iommu = true;
1317 
1318 	ret = omap_rproc_of_get_internal_memories(pdev, rproc);
1319 	if (ret)
1320 		goto free_rproc;
1321 
1322 	ret = omap_rproc_get_boot_data(pdev, rproc);
1323 	if (ret)
1324 		goto free_rproc;
1325 
1326 	ret = omap_rproc_of_get_timers(pdev, rproc);
1327 	if (ret)
1328 		goto free_rproc;
1329 
1330 	init_completion(&oproc->pm_comp);
1331 	oproc->autosuspend_delay = DEFAULT_AUTOSUSPEND_DELAY;
1332 
1333 	of_property_read_u32(pdev->dev.of_node, "ti,autosuspend-delay-ms",
1334 			     &oproc->autosuspend_delay);
1335 
1336 	pm_runtime_set_autosuspend_delay(&pdev->dev, oproc->autosuspend_delay);
1337 
1338 	oproc->fck = devm_clk_get(&pdev->dev, 0);
1339 	if (IS_ERR(oproc->fck)) {
1340 		ret = PTR_ERR(oproc->fck);
1341 		goto free_rproc;
1342 	}
1343 
1344 	ret = of_reserved_mem_device_init(&pdev->dev);
1345 	if (ret) {
1346 		dev_warn(&pdev->dev, "device does not have specific CMA pool.\n");
1347 		dev_warn(&pdev->dev, "Typically this should be provided,\n");
1348 		dev_warn(&pdev->dev, "only omit if you know what you are doing.\n");
1349 	}
1350 
1351 	platform_set_drvdata(pdev, rproc);
1352 
1353 	ret = rproc_add(rproc);
1354 	if (ret)
1355 		goto release_mem;
1356 
1357 	return 0;
1358 
1359 release_mem:
1360 	of_reserved_mem_device_release(&pdev->dev);
1361 free_rproc:
1362 	rproc_free(rproc);
1363 	return ret;
1364 }
1365 
1366 static int omap_rproc_remove(struct platform_device *pdev)
1367 {
1368 	struct rproc *rproc = platform_get_drvdata(pdev);
1369 
1370 	rproc_del(rproc);
1371 	rproc_free(rproc);
1372 	of_reserved_mem_device_release(&pdev->dev);
1373 
1374 	return 0;
1375 }
1376 
1377 static const struct dev_pm_ops omap_rproc_pm_ops = {
1378 	SET_SYSTEM_SLEEP_PM_OPS(omap_rproc_suspend, omap_rproc_resume)
1379 	SET_RUNTIME_PM_OPS(omap_rproc_runtime_suspend,
1380 			   omap_rproc_runtime_resume, NULL)
1381 };
1382 
1383 static struct platform_driver omap_rproc_driver = {
1384 	.probe = omap_rproc_probe,
1385 	.remove = omap_rproc_remove,
1386 	.driver = {
1387 		.name = "omap-rproc",
1388 		.pm = &omap_rproc_pm_ops,
1389 		.of_match_table = omap_rproc_of_match,
1390 	},
1391 };
1392 
1393 module_platform_driver(omap_rproc_driver);
1394 
1395 MODULE_LICENSE("GPL v2");
1396 MODULE_DESCRIPTION("OMAP Remote Processor control driver");
1397