1 /* 2 * Remote processor machine-specific module for DA8XX 3 * 4 * Copyright (C) 2013 Texas Instruments, Inc. 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * version 2 as published by the Free Software Foundation. 9 */ 10 11 #include <linux/bitops.h> 12 #include <linux/clk.h> 13 #include <linux/reset.h> 14 #include <linux/err.h> 15 #include <linux/interrupt.h> 16 #include <linux/io.h> 17 #include <linux/irq.h> 18 #include <linux/kernel.h> 19 #include <linux/module.h> 20 #include <linux/of_reserved_mem.h> 21 #include <linux/platform_device.h> 22 #include <linux/remoteproc.h> 23 24 #include "remoteproc_internal.h" 25 26 static char *da8xx_fw_name; 27 module_param(da8xx_fw_name, charp, 0444); 28 MODULE_PARM_DESC(da8xx_fw_name, 29 "Name of DSP firmware file in /lib/firmware (if not specified defaults to 'rproc-dsp-fw')"); 30 31 /* 32 * OMAP-L138 Technical References: 33 * http://www.ti.com/product/omap-l138 34 */ 35 #define SYSCFG_CHIPSIG0 BIT(0) 36 #define SYSCFG_CHIPSIG1 BIT(1) 37 #define SYSCFG_CHIPSIG2 BIT(2) 38 #define SYSCFG_CHIPSIG3 BIT(3) 39 #define SYSCFG_CHIPSIG4 BIT(4) 40 41 #define DA8XX_RPROC_LOCAL_ADDRESS_MASK (SZ_16M - 1) 42 43 /** 44 * struct da8xx_rproc_mem - internal memory structure 45 * @cpu_addr: MPU virtual address of the memory region 46 * @bus_addr: Bus address used to access the memory region 47 * @dev_addr: Device address of the memory region from DSP view 48 * @size: Size of the memory region 49 */ 50 struct da8xx_rproc_mem { 51 void __iomem *cpu_addr; 52 phys_addr_t bus_addr; 53 u32 dev_addr; 54 size_t size; 55 }; 56 57 /** 58 * struct da8xx_rproc - da8xx remote processor instance state 59 * @rproc: rproc handle 60 * @mem: internal memory regions data 61 * @num_mems: number of internal memory regions 62 * @dsp_clk: placeholder for platform's DSP clk 63 * @ack_fxn: chip-specific ack function for ack'ing irq 64 * @irq_data: ack_fxn function parameter 65 * @chipsig: virt ptr to DSP interrupt registers (CHIPSIG & CHIPSIG_CLR) 66 * @bootreg: virt ptr to DSP boot address register (HOST1CFG) 67 * @irq: irq # used by this instance 68 */ 69 struct da8xx_rproc { 70 struct rproc *rproc; 71 struct da8xx_rproc_mem *mem; 72 int num_mems; 73 struct clk *dsp_clk; 74 struct reset_control *dsp_reset; 75 void (*ack_fxn)(struct irq_data *data); 76 struct irq_data *irq_data; 77 void __iomem *chipsig; 78 void __iomem *bootreg; 79 int irq; 80 }; 81 82 /** 83 * handle_event() - inbound virtqueue message workqueue function 84 * 85 * This function is registered as a kernel thread and is scheduled by the 86 * kernel handler. 87 */ 88 static irqreturn_t handle_event(int irq, void *p) 89 { 90 struct rproc *rproc = (struct rproc *)p; 91 92 /* Process incoming buffers on all our vrings */ 93 rproc_vq_interrupt(rproc, 0); 94 rproc_vq_interrupt(rproc, 1); 95 96 return IRQ_HANDLED; 97 } 98 99 /** 100 * da8xx_rproc_callback() - inbound virtqueue message handler 101 * 102 * This handler is invoked directly by the kernel whenever the remote 103 * core (DSP) has modified the state of a virtqueue. There is no 104 * "payload" message indicating the virtqueue index as is the case with 105 * mailbox-based implementations on OMAP4. As such, this handler "polls" 106 * each known virtqueue index for every invocation. 107 */ 108 static irqreturn_t da8xx_rproc_callback(int irq, void *p) 109 { 110 struct rproc *rproc = (struct rproc *)p; 111 struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv; 112 u32 chipsig; 113 114 chipsig = readl(drproc->chipsig); 115 if (chipsig & SYSCFG_CHIPSIG0) { 116 /* Clear interrupt level source */ 117 writel(SYSCFG_CHIPSIG0, drproc->chipsig + 4); 118 119 /* 120 * ACK intr to AINTC. 121 * 122 * It has already been ack'ed by the kernel before calling 123 * this function, but since the ARM<->DSP interrupts in the 124 * CHIPSIG register are "level" instead of "pulse" variety, 125 * we need to ack it after taking down the level else we'll 126 * be called again immediately after returning. 127 */ 128 drproc->ack_fxn(drproc->irq_data); 129 130 return IRQ_WAKE_THREAD; 131 } 132 133 return IRQ_HANDLED; 134 } 135 136 static int da8xx_rproc_start(struct rproc *rproc) 137 { 138 struct device *dev = rproc->dev.parent; 139 struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv; 140 struct clk *dsp_clk = drproc->dsp_clk; 141 struct reset_control *dsp_reset = drproc->dsp_reset; 142 int ret; 143 144 /* hw requires the start (boot) address be on 1KB boundary */ 145 if (rproc->bootaddr & 0x3ff) { 146 dev_err(dev, "invalid boot address: must be aligned to 1KB\n"); 147 148 return -EINVAL; 149 } 150 151 writel(rproc->bootaddr, drproc->bootreg); 152 153 ret = clk_prepare_enable(dsp_clk); 154 if (ret) { 155 dev_err(dev, "clk_prepare_enable() failed: %d\n", ret); 156 return ret; 157 } 158 159 ret = reset_control_deassert(dsp_reset); 160 if (ret) { 161 dev_err(dev, "reset_control_deassert() failed: %d\n", ret); 162 clk_disable_unprepare(dsp_clk); 163 return ret; 164 } 165 166 return 0; 167 } 168 169 static int da8xx_rproc_stop(struct rproc *rproc) 170 { 171 struct da8xx_rproc *drproc = rproc->priv; 172 struct device *dev = rproc->dev.parent; 173 int ret; 174 175 ret = reset_control_assert(drproc->dsp_reset); 176 if (ret) { 177 dev_err(dev, "reset_control_assert() failed: %d\n", ret); 178 return ret; 179 } 180 181 clk_disable_unprepare(drproc->dsp_clk); 182 183 return 0; 184 } 185 186 /* kick a virtqueue */ 187 static void da8xx_rproc_kick(struct rproc *rproc, int vqid) 188 { 189 struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv; 190 191 /* Interrupt remote proc */ 192 writel(SYSCFG_CHIPSIG2, drproc->chipsig); 193 } 194 195 static const struct rproc_ops da8xx_rproc_ops = { 196 .start = da8xx_rproc_start, 197 .stop = da8xx_rproc_stop, 198 .kick = da8xx_rproc_kick, 199 }; 200 201 static int da8xx_rproc_get_internal_memories(struct platform_device *pdev, 202 struct da8xx_rproc *drproc) 203 { 204 static const char * const mem_names[] = {"l2sram", "l1pram", "l1dram"}; 205 int num_mems = ARRAY_SIZE(mem_names); 206 struct device *dev = &pdev->dev; 207 struct resource *res; 208 int i; 209 210 drproc->mem = devm_kcalloc(dev, num_mems, sizeof(*drproc->mem), 211 GFP_KERNEL); 212 if (!drproc->mem) 213 return -ENOMEM; 214 215 for (i = 0; i < num_mems; i++) { 216 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 217 mem_names[i]); 218 drproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res); 219 if (IS_ERR(drproc->mem[i].cpu_addr)) { 220 dev_err(dev, "failed to parse and map %s memory\n", 221 mem_names[i]); 222 return PTR_ERR(drproc->mem[i].cpu_addr); 223 } 224 drproc->mem[i].bus_addr = res->start; 225 drproc->mem[i].dev_addr = 226 res->start & DA8XX_RPROC_LOCAL_ADDRESS_MASK; 227 drproc->mem[i].size = resource_size(res); 228 229 dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %p da 0x%x\n", 230 mem_names[i], &drproc->mem[i].bus_addr, 231 drproc->mem[i].size, drproc->mem[i].cpu_addr, 232 drproc->mem[i].dev_addr); 233 } 234 drproc->num_mems = num_mems; 235 236 return 0; 237 } 238 239 static int da8xx_rproc_probe(struct platform_device *pdev) 240 { 241 struct device *dev = &pdev->dev; 242 struct da8xx_rproc *drproc; 243 struct rproc *rproc; 244 struct irq_data *irq_data; 245 struct resource *bootreg_res; 246 struct resource *chipsig_res; 247 struct clk *dsp_clk; 248 struct reset_control *dsp_reset; 249 void __iomem *chipsig; 250 void __iomem *bootreg; 251 int irq; 252 int ret; 253 254 irq = platform_get_irq(pdev, 0); 255 if (irq < 0) { 256 dev_err(dev, "platform_get_irq(pdev, 0) error: %d\n", irq); 257 return irq; 258 } 259 260 irq_data = irq_get_irq_data(irq); 261 if (!irq_data) { 262 dev_err(dev, "irq_get_irq_data(%d): NULL\n", irq); 263 return -EINVAL; 264 } 265 266 bootreg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 267 "host1cfg"); 268 bootreg = devm_ioremap_resource(dev, bootreg_res); 269 if (IS_ERR(bootreg)) 270 return PTR_ERR(bootreg); 271 272 chipsig_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 273 "chipsig"); 274 chipsig = devm_ioremap_resource(dev, chipsig_res); 275 if (IS_ERR(chipsig)) 276 return PTR_ERR(chipsig); 277 278 dsp_clk = devm_clk_get(dev, NULL); 279 if (IS_ERR(dsp_clk)) { 280 dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk)); 281 282 return PTR_ERR(dsp_clk); 283 } 284 285 dsp_reset = devm_reset_control_get_exclusive(dev, NULL); 286 if (IS_ERR(dsp_reset)) { 287 if (PTR_ERR(dsp_reset) != -EPROBE_DEFER) 288 dev_err(dev, "unable to get reset control: %ld\n", 289 PTR_ERR(dsp_reset)); 290 291 return PTR_ERR(dsp_reset); 292 } 293 294 if (dev->of_node) { 295 ret = of_reserved_mem_device_init(dev); 296 if (ret) { 297 dev_err(dev, "device does not have specific CMA pool: %d\n", 298 ret); 299 return ret; 300 } 301 } 302 303 rproc = rproc_alloc(dev, "dsp", &da8xx_rproc_ops, da8xx_fw_name, 304 sizeof(*drproc)); 305 if (!rproc) { 306 ret = -ENOMEM; 307 goto free_mem; 308 } 309 310 /* error recovery is not supported at present */ 311 rproc->recovery_disabled = true; 312 313 drproc = rproc->priv; 314 drproc->rproc = rproc; 315 drproc->dsp_clk = dsp_clk; 316 drproc->dsp_reset = dsp_reset; 317 rproc->has_iommu = false; 318 319 ret = da8xx_rproc_get_internal_memories(pdev, drproc); 320 if (ret) 321 goto free_rproc; 322 323 platform_set_drvdata(pdev, rproc); 324 325 /* everything the ISR needs is now setup, so hook it up */ 326 ret = devm_request_threaded_irq(dev, irq, da8xx_rproc_callback, 327 handle_event, 0, "da8xx-remoteproc", 328 rproc); 329 if (ret) { 330 dev_err(dev, "devm_request_threaded_irq error: %d\n", ret); 331 goto free_rproc; 332 } 333 334 /* 335 * rproc_add() can end up enabling the DSP's clk with the DSP 336 * *not* in reset, but da8xx_rproc_start() needs the DSP to be 337 * held in reset at the time it is called. 338 */ 339 ret = reset_control_assert(dsp_reset); 340 if (ret) 341 goto free_rproc; 342 343 drproc->chipsig = chipsig; 344 drproc->bootreg = bootreg; 345 drproc->ack_fxn = irq_data->chip->irq_ack; 346 drproc->irq_data = irq_data; 347 drproc->irq = irq; 348 349 ret = rproc_add(rproc); 350 if (ret) { 351 dev_err(dev, "rproc_add failed: %d\n", ret); 352 goto free_rproc; 353 } 354 355 return 0; 356 357 free_rproc: 358 rproc_free(rproc); 359 free_mem: 360 if (dev->of_node) 361 of_reserved_mem_device_release(dev); 362 return ret; 363 } 364 365 static int da8xx_rproc_remove(struct platform_device *pdev) 366 { 367 struct rproc *rproc = platform_get_drvdata(pdev); 368 struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv; 369 struct device *dev = &pdev->dev; 370 371 /* 372 * The devm subsystem might end up releasing things before 373 * freeing the irq, thus allowing an interrupt to sneak in while 374 * the device is being removed. This should prevent that. 375 */ 376 disable_irq(drproc->irq); 377 378 rproc_del(rproc); 379 rproc_free(rproc); 380 if (dev->of_node) 381 of_reserved_mem_device_release(dev); 382 383 return 0; 384 } 385 386 static const struct of_device_id davinci_rproc_of_match[] __maybe_unused = { 387 { .compatible = "ti,da850-dsp", }, 388 { /* sentinel */ }, 389 }; 390 MODULE_DEVICE_TABLE(of, davinci_rproc_of_match); 391 392 static struct platform_driver da8xx_rproc_driver = { 393 .probe = da8xx_rproc_probe, 394 .remove = da8xx_rproc_remove, 395 .driver = { 396 .name = "davinci-rproc", 397 .of_match_table = of_match_ptr(davinci_rproc_of_match), 398 }, 399 }; 400 401 module_platform_driver(da8xx_rproc_driver); 402 403 MODULE_LICENSE("GPL v2"); 404 MODULE_DESCRIPTION("DA8XX Remote Processor control driver"); 405