xref: /openbmc/linux/drivers/remoteproc/Kconfig (revision 82df5b73) 
1# SPDX-License-Identifier: GPL-2.0-only
2menu "Remoteproc drivers"
3
4config REMOTEPROC
5	bool "Support for Remote Processor subsystem"
6	depends on HAS_DMA
7	select CRC32
8	select FW_LOADER
9	select VIRTIO
10	select WANT_DEV_COREDUMP
11	help
12	  Support for remote processors (such as DSP coprocessors). These
13	  are mainly used on embedded systems.
14
15if REMOTEPROC
16
17config IMX_REMOTEPROC
18	tristate "IMX6/7 remoteproc support"
19	depends on ARCH_MXC
20	help
21	  Say y here to support iMX's remote processors (Cortex M4
22	  on iMX7D) via the remote processor framework.
23
24	  It's safe to say N here.
25
26config INGENIC_VPU_RPROC
27	tristate "Ingenic JZ47xx VPU remoteproc support"
28	depends on MIPS || COMPILE_TEST
29	help
30	  Say y or m here to support the VPU in the JZ47xx SoCs from Ingenic.
31
32	  This can be either built-in or a loadable module.
33	  If unsure say N.
34
35config MTK_SCP
36	tristate "Mediatek SCP support"
37	depends on ARCH_MEDIATEK
38	select RPMSG_MTK_SCP
39	help
40	  Say y here to support Mediatek's System Companion Processor (SCP) via
41	  the remote processor framework.
42
43	  It's safe to say N here.
44
45config OMAP_REMOTEPROC
46	tristate "OMAP remoteproc support"
47	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
48	depends on OMAP_IOMMU
49	select MAILBOX
50	select OMAP2PLUS_MBOX
51	help
52	  Say y here to support OMAP's remote processors (dual M3
53	  and DSP on OMAP4) via the remote processor framework.
54
55	  Currently only supported on OMAP4.
56
57	  Usually you want to say Y here, in order to enable multimedia
58	  use-cases to run on your platform (multimedia codecs are
59	  offloaded to remote DSP processors using this framework).
60
61	  It's safe to say N here if you're not interested in multimedia
62	  offloading or just want a bare minimum kernel.
63
64config OMAP_REMOTEPROC_WATCHDOG
65	bool "OMAP remoteproc watchdog timer"
66	depends on OMAP_REMOTEPROC
67	default n
68	help
69	  Say Y here to enable watchdog timer for remote processors.
70
71	  This option controls the watchdog functionality for the remote
72	  processors in OMAP. Dedicated OMAP DMTimers are used by the remote
73	  processors and triggers the timer interrupt upon a watchdog
74	  detection.
75
76config WKUP_M3_RPROC
77	tristate "AMx3xx Wakeup M3 remoteproc support"
78	depends on SOC_AM33XX || SOC_AM43XX
79	help
80	  Say y here to support Wakeup M3 remote processor on TI AM33xx
81	  and AM43xx family of SoCs.
82
83	  Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
84	  for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
85	  firmware onto these remote processors.
86	  If unsure say N.
87
88config DA8XX_REMOTEPROC
89	tristate "DA8xx/OMAP-L13x remoteproc support"
90	depends on ARCH_DAVINCI_DA8XX
91	depends on DMA_CMA
92	help
93	  Say y here to support DA8xx/OMAP-L13x remote processors via the
94	  remote processor framework.
95
96	  You want to say y here in order to enable AMP
97	  use-cases to run on your platform (multimedia codecs are
98	  offloaded to remote DSP processors using this framework).
99
100	  This module controls the name of the firmware file that gets
101	  loaded on the DSP.  This file must reside in the /lib/firmware
102	  directory.  It can be specified via the module parameter
103	  da8xx_fw_name=<filename>, and if not specified will default to
104	  "rproc-dsp-fw".
105
106	  It's safe to say n here if you're not interested in multimedia
107	  offloading.
108
109config KEYSTONE_REMOTEPROC
110	tristate "Keystone Remoteproc support"
111	depends on ARCH_KEYSTONE
112	help
113	  Say Y here here to support Keystone remote processors (DSP)
114	  via the remote processor framework.
115
116	  It's safe to say N here if you're not interested in the Keystone
117	  DSPs or just want to use a bare minimum kernel.
118
119config QCOM_RPROC_COMMON
120	tristate
121
122config QCOM_Q6V5_COMMON
123	tristate
124	depends on ARCH_QCOM
125	depends on QCOM_SMEM
126
127config QCOM_Q6V5_ADSP
128	tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader"
129	depends on OF && ARCH_QCOM
130	depends on QCOM_SMEM
131	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
132	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
133	depends on QCOM_SYSMON || QCOM_SYSMON=n
134	select MFD_SYSCON
135	select QCOM_MDT_LOADER
136	select QCOM_Q6V5_COMMON
137	select QCOM_RPROC_COMMON
138	help
139	  Say y here to support the Peripheral Image Loader
140	  for the Qualcomm Technology Inc. ADSP remote processors.
141
142config QCOM_Q6V5_MSS
143	tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
144	depends on OF && ARCH_QCOM
145	depends on QCOM_SMEM
146	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
147	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
148	depends on QCOM_SYSMON || QCOM_SYSMON=n
149	select MFD_SYSCON
150	select QCOM_MDT_LOADER
151	select QCOM_Q6V5_COMMON
152	select QCOM_Q6V5_IPA_NOTIFY
153	select QCOM_RPROC_COMMON
154	select QCOM_SCM
155	help
156	  Say y here to support the Qualcomm self-authenticating modem
157	  subsystem based on Hexagon V5.
158
159config QCOM_Q6V5_PAS
160	tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
161	depends on OF && ARCH_QCOM
162	depends on QCOM_SMEM
163	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
164	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
165	depends on QCOM_SYSMON || QCOM_SYSMON=n
166	select MFD_SYSCON
167	select QCOM_MDT_LOADER
168	select QCOM_Q6V5_COMMON
169	select QCOM_RPROC_COMMON
170	select QCOM_SCM
171	help
172	  Say y here to support the TrustZone based Peripherial Image Loader
173	  for the Qualcomm Hexagon v5 based remote processors. This is commonly
174	  used to control subsystems such as ADSP, Compute and Sensor.
175
176config QCOM_Q6V5_WCSS
177	tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
178	depends on OF && ARCH_QCOM
179	depends on QCOM_SMEM
180	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
181	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
182	depends on QCOM_SYSMON || QCOM_SYSMON=n
183	select MFD_SYSCON
184	select QCOM_MDT_LOADER
185	select QCOM_Q6V5_COMMON
186	select QCOM_RPROC_COMMON
187	select QCOM_SCM
188	help
189	  Say y here to support the Qualcomm Peripheral Image Loader for the
190	  Hexagon V5 based WCSS remote processors.
191
192config QCOM_Q6V5_IPA_NOTIFY
193	tristate
194
195config QCOM_SYSMON
196	tristate "Qualcomm sysmon driver"
197	depends on RPMSG
198	depends on ARCH_QCOM
199	depends on NET
200	select QCOM_QMI_HELPERS
201	help
202	  The sysmon driver implements a sysmon QMI client and a handler for
203	  the sys_mon SMD and GLINK channel, which are used for graceful
204	  shutdown, retrieving failure information and propagating information
205	  about other subsystems being shut down.
206
207	  Say y here if your system runs firmware on any other subsystems, e.g.
208	  modem or DSP.
209
210config QCOM_WCNSS_PIL
211	tristate "Qualcomm WCNSS Peripheral Image Loader"
212	depends on OF && ARCH_QCOM
213	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
214	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
215	depends on QCOM_SMEM
216	depends on QCOM_SYSMON || QCOM_SYSMON=n
217	select QCOM_MDT_LOADER
218	select QCOM_RPROC_COMMON
219	select QCOM_SCM
220	help
221	  Say y here to support the Peripheral Image Loader for the Qualcomm
222	  Wireless Connectivity Subsystem.
223
224config ST_REMOTEPROC
225	tristate "ST remoteproc support"
226	depends on ARCH_STI
227	select MAILBOX
228	select STI_MBOX
229	help
230	  Say y here to support ST's adjunct processors via the remote
231	  processor framework.
232	  This can be either built-in or a loadable module.
233
234config ST_SLIM_REMOTEPROC
235	tristate
236
237config STM32_RPROC
238	tristate "STM32 remoteproc support"
239	depends on ARCH_STM32
240	depends on REMOTEPROC
241	select MAILBOX
242	help
243	  Say y here to support STM32 MCU processors via the
244	  remote processor framework.
245
246	  You want to say y here in order to enable AMP
247	  use-cases to run on your platform (dedicated firmware could be
248	  offloaded to remote MCU processors using this framework).
249
250	  This can be either built-in or a loadable module.
251
252endif # REMOTEPROC
253
254endmenu
255