xref: /openbmc/linux/drivers/regulator/sy8827n.c (revision 2cf1c348)
1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // SY8827N regulator driver
4 //
5 // Copyright (C) 2020 Synaptics Incorporated
6 //
7 // Author: Jisheng Zhang <jszhang@kernel.org>
8 
9 #include <linux/gpio/consumer.h>
10 #include <linux/module.h>
11 #include <linux/i2c.h>
12 #include <linux/of_device.h>
13 #include <linux/regmap.h>
14 #include <linux/regulator/driver.h>
15 #include <linux/regulator/of_regulator.h>
16 
17 #define SY8827N_VSEL0		0
18 #define   SY8827N_BUCK_EN	(1 << 7)
19 #define   SY8827N_MODE		(1 << 6)
20 #define SY8827N_VSEL1		1
21 #define SY8827N_CTRL		2
22 #define SY8827N_ID1		3
23 #define SY8827N_ID2		4
24 #define SY8827N_PGOOD		5
25 #define SY8827N_MAX		(SY8827N_PGOOD + 1)
26 
27 #define SY8827N_NVOLTAGES	64
28 #define SY8827N_VSELMIN		600000
29 #define SY8827N_VSELSTEP	12500
30 
31 struct sy8827n_device_info {
32 	struct device *dev;
33 	struct regulator_desc desc;
34 	struct regulator_init_data *regulator;
35 	struct gpio_desc *en_gpio;
36 	unsigned int vsel_reg;
37 };
38 
39 static int sy8827n_set_mode(struct regulator_dev *rdev, unsigned int mode)
40 {
41 	struct sy8827n_device_info *di = rdev_get_drvdata(rdev);
42 
43 	switch (mode) {
44 	case REGULATOR_MODE_FAST:
45 		regmap_update_bits(rdev->regmap, di->vsel_reg,
46 				   SY8827N_MODE, SY8827N_MODE);
47 		break;
48 	case REGULATOR_MODE_NORMAL:
49 		regmap_update_bits(rdev->regmap, di->vsel_reg,
50 				   SY8827N_MODE, 0);
51 		break;
52 	default:
53 		return -EINVAL;
54 	}
55 	return 0;
56 }
57 
58 static unsigned int sy8827n_get_mode(struct regulator_dev *rdev)
59 {
60 	struct sy8827n_device_info *di = rdev_get_drvdata(rdev);
61 	u32 val;
62 	int ret = 0;
63 
64 	ret = regmap_read(rdev->regmap, di->vsel_reg, &val);
65 	if (ret < 0)
66 		return ret;
67 	if (val & SY8827N_MODE)
68 		return REGULATOR_MODE_FAST;
69 	else
70 		return REGULATOR_MODE_NORMAL;
71 }
72 
73 static const struct regulator_ops sy8827n_regulator_ops = {
74 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
75 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
76 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
77 	.map_voltage = regulator_map_voltage_linear,
78 	.list_voltage = regulator_list_voltage_linear,
79 	.enable = regulator_enable_regmap,
80 	.disable = regulator_disable_regmap,
81 	.is_enabled = regulator_is_enabled_regmap,
82 	.set_mode = sy8827n_set_mode,
83 	.get_mode = sy8827n_get_mode,
84 };
85 
86 static int sy8827n_regulator_register(struct sy8827n_device_info *di,
87 			struct regulator_config *config)
88 {
89 	struct regulator_desc *rdesc = &di->desc;
90 	struct regulator_dev *rdev;
91 
92 	rdesc->name = "sy8827n-reg";
93 	rdesc->supply_name = "vin";
94 	rdesc->ops = &sy8827n_regulator_ops;
95 	rdesc->type = REGULATOR_VOLTAGE;
96 	rdesc->n_voltages = SY8827N_NVOLTAGES;
97 	rdesc->enable_reg = di->vsel_reg;
98 	rdesc->enable_mask = SY8827N_BUCK_EN;
99 	rdesc->min_uV = SY8827N_VSELMIN;
100 	rdesc->uV_step = SY8827N_VSELSTEP;
101 	rdesc->vsel_reg = di->vsel_reg;
102 	rdesc->vsel_mask = rdesc->n_voltages - 1;
103 	rdesc->owner = THIS_MODULE;
104 
105 	rdev = devm_regulator_register(di->dev, &di->desc, config);
106 	return PTR_ERR_OR_ZERO(rdev);
107 }
108 
109 static bool sy8827n_volatile_reg(struct device *dev, unsigned int reg)
110 {
111 	if (reg == SY8827N_PGOOD)
112 		return true;
113 	return false;
114 }
115 
116 static const struct regmap_config sy8827n_regmap_config = {
117 	.reg_bits = 8,
118 	.val_bits = 8,
119 	.volatile_reg = sy8827n_volatile_reg,
120 	.num_reg_defaults_raw = SY8827N_MAX,
121 	.cache_type = REGCACHE_FLAT,
122 };
123 
124 static int sy8827n_i2c_probe(struct i2c_client *client)
125 {
126 	struct device *dev = &client->dev;
127 	struct device_node *np = dev->of_node;
128 	struct sy8827n_device_info *di;
129 	struct regulator_config config = { };
130 	struct regmap *regmap;
131 	int ret;
132 
133 	di = devm_kzalloc(dev, sizeof(struct sy8827n_device_info), GFP_KERNEL);
134 	if (!di)
135 		return -ENOMEM;
136 
137 	di->regulator = of_get_regulator_init_data(dev, np, &di->desc);
138 	if (!di->regulator) {
139 		dev_err(dev, "Platform data not found!\n");
140 		return -EINVAL;
141 	}
142 
143 	di->en_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
144 	if (IS_ERR(di->en_gpio))
145 		return PTR_ERR(di->en_gpio);
146 
147 	if (of_property_read_bool(np, "silergy,vsel-state-high"))
148 		di->vsel_reg = SY8827N_VSEL1;
149 	else
150 		di->vsel_reg = SY8827N_VSEL0;
151 
152 	di->dev = dev;
153 
154 	regmap = devm_regmap_init_i2c(client, &sy8827n_regmap_config);
155 	if (IS_ERR(regmap)) {
156 		dev_err(dev, "Failed to allocate regmap!\n");
157 		return PTR_ERR(regmap);
158 	}
159 	i2c_set_clientdata(client, di);
160 
161 	config.dev = di->dev;
162 	config.init_data = di->regulator;
163 	config.regmap = regmap;
164 	config.driver_data = di;
165 	config.of_node = np;
166 
167 	ret = sy8827n_regulator_register(di, &config);
168 	if (ret < 0)
169 		dev_err(dev, "Failed to register regulator!\n");
170 	return ret;
171 }
172 
173 #ifdef CONFIG_OF
174 static const struct of_device_id sy8827n_dt_ids[] = {
175 	{
176 		.compatible = "silergy,sy8827n",
177 	},
178 	{ }
179 };
180 MODULE_DEVICE_TABLE(of, sy8827n_dt_ids);
181 #endif
182 
183 static const struct i2c_device_id sy8827n_id[] = {
184 	{ "sy8827n", },
185 	{ },
186 };
187 MODULE_DEVICE_TABLE(i2c, sy8827n_id);
188 
189 static struct i2c_driver sy8827n_regulator_driver = {
190 	.driver = {
191 		.name = "sy8827n-regulator",
192 		.of_match_table = of_match_ptr(sy8827n_dt_ids),
193 	},
194 	.probe_new = sy8827n_i2c_probe,
195 	.id_table = sy8827n_id,
196 };
197 module_i2c_driver(sy8827n_regulator_driver);
198 
199 MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
200 MODULE_DESCRIPTION("SY8827N regulator driver");
201 MODULE_LICENSE("GPL v2");
202