1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (C) STMicroelectronics 2018
3 // Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
4 
5 #include <linux/interrupt.h>
6 #include <linux/mfd/stpmic1.h>
7 #include <linux/module.h>
8 #include <linux/of_irq.h>
9 #include <linux/platform_device.h>
10 #include <linux/regmap.h>
11 #include <linux/regulator/driver.h>
12 #include <linux/regulator/machine.h>
13 #include <linux/regulator/of_regulator.h>
14 
15 #include <dt-bindings/mfd/st,stpmic1.h>
16 
17 /**
18  * stpmic1 regulator description: this structure is used as driver data
19  * @desc: regulator framework description
20  * @mask_reset_reg: mask reset register address
21  * @mask_reset_mask: mask rank and mask reset register mask
22  * @icc_reg: icc register address
23  * @icc_mask: icc register mask
24  */
25 struct stpmic1_regulator_cfg {
26 	struct regulator_desc desc;
27 	u8 mask_reset_reg;
28 	u8 mask_reset_mask;
29 	u8 icc_reg;
30 	u8 icc_mask;
31 };
32 
33 static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode);
34 static unsigned int stpmic1_get_mode(struct regulator_dev *rdev);
35 static int stpmic1_set_icc(struct regulator_dev *rdev);
36 static unsigned int stpmic1_map_mode(unsigned int mode);
37 
38 enum {
39 	STPMIC1_BUCK1 = 0,
40 	STPMIC1_BUCK2 = 1,
41 	STPMIC1_BUCK3 = 2,
42 	STPMIC1_BUCK4 = 3,
43 	STPMIC1_LDO1 = 4,
44 	STPMIC1_LDO2 = 5,
45 	STPMIC1_LDO3 = 6,
46 	STPMIC1_LDO4 = 7,
47 	STPMIC1_LDO5 = 8,
48 	STPMIC1_LDO6 = 9,
49 	STPMIC1_VREF_DDR = 10,
50 	STPMIC1_BOOST = 11,
51 	STPMIC1_VBUS_OTG = 12,
52 	STPMIC1_SW_OUT = 13,
53 };
54 
55 /* Enable time worst case is 5000mV/(2250uV/uS) */
56 #define PMIC_ENABLE_TIME_US 2200
57 
58 static const struct regulator_linear_range buck1_ranges[] = {
59 	REGULATOR_LINEAR_RANGE(725000, 0, 4, 0),
60 	REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000),
61 	REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0),
62 };
63 
64 static const struct regulator_linear_range buck2_ranges[] = {
65 	REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0),
66 	REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0),
67 	REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0),
68 	REGULATOR_LINEAR_RANGE(1150000, 22, 23, 0),
69 	REGULATOR_LINEAR_RANGE(1200000, 24, 25, 0),
70 	REGULATOR_LINEAR_RANGE(1250000, 26, 27, 0),
71 	REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
72 	REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
73 	REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0),
74 	REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0),
75 	REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0),
76 };
77 
78 static const struct regulator_linear_range buck3_ranges[] = {
79 	REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0),
80 	REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0),
81 	REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0),
82 	REGULATOR_LINEAR_RANGE(1300000, 28, 31, 0),
83 	REGULATOR_LINEAR_RANGE(1400000, 32, 35, 0),
84 	REGULATOR_LINEAR_RANGE(1500000, 36, 55, 100000),
85 	REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0),
86 };
87 
88 static const struct regulator_linear_range buck4_ranges[] = {
89 	REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000),
90 	REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
91 	REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
92 	REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0),
93 	REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0),
94 	REGULATOR_LINEAR_RANGE(1500000, 36, 60, 100000),
95 	REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0),
96 };
97 
98 static const struct regulator_linear_range ldo1_ranges[] = {
99 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
100 	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
101 	REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
102 };
103 
104 static const struct regulator_linear_range ldo2_ranges[] = {
105 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
106 	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
107 	REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
108 };
109 
110 static const struct regulator_linear_range ldo3_ranges[] = {
111 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
112 	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
113 	REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
114 	/* with index 31 LDO3 is in DDR mode */
115 	REGULATOR_LINEAR_RANGE(500000, 31, 31, 0),
116 };
117 
118 static const struct regulator_linear_range ldo5_ranges[] = {
119 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
120 	REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000),
121 	REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0),
122 };
123 
124 static const struct regulator_linear_range ldo6_ranges[] = {
125 	REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000),
126 	REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
127 };
128 
129 static const struct regulator_ops stpmic1_ldo_ops = {
130 	.list_voltage = regulator_list_voltage_linear_range,
131 	.map_voltage = regulator_map_voltage_linear_range,
132 	.is_enabled = regulator_is_enabled_regmap,
133 	.enable = regulator_enable_regmap,
134 	.disable = regulator_disable_regmap,
135 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
136 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
137 	.set_over_current_protection = stpmic1_set_icc,
138 };
139 
140 static const struct regulator_ops stpmic1_ldo3_ops = {
141 	.list_voltage = regulator_list_voltage_linear_range,
142 	.map_voltage = regulator_map_voltage_iterate,
143 	.is_enabled = regulator_is_enabled_regmap,
144 	.enable = regulator_enable_regmap,
145 	.disable = regulator_disable_regmap,
146 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
147 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
148 	.get_bypass = regulator_get_bypass_regmap,
149 	.set_bypass = regulator_set_bypass_regmap,
150 	.set_over_current_protection = stpmic1_set_icc,
151 };
152 
153 static const struct regulator_ops stpmic1_ldo4_fixed_regul_ops = {
154 	.is_enabled = regulator_is_enabled_regmap,
155 	.enable = regulator_enable_regmap,
156 	.disable = regulator_disable_regmap,
157 	.set_over_current_protection = stpmic1_set_icc,
158 };
159 
160 static const struct regulator_ops stpmic1_buck_ops = {
161 	.list_voltage = regulator_list_voltage_linear_range,
162 	.map_voltage = regulator_map_voltage_linear_range,
163 	.is_enabled = regulator_is_enabled_regmap,
164 	.enable = regulator_enable_regmap,
165 	.disable = regulator_disable_regmap,
166 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
167 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
168 	.set_pull_down = regulator_set_pull_down_regmap,
169 	.set_mode = stpmic1_set_mode,
170 	.get_mode = stpmic1_get_mode,
171 	.set_over_current_protection = stpmic1_set_icc,
172 };
173 
174 static const struct regulator_ops stpmic1_vref_ddr_ops = {
175 	.is_enabled = regulator_is_enabled_regmap,
176 	.enable = regulator_enable_regmap,
177 	.disable = regulator_disable_regmap,
178 };
179 
180 static const struct regulator_ops stpmic1_boost_regul_ops = {
181 	.is_enabled = regulator_is_enabled_regmap,
182 	.enable = regulator_enable_regmap,
183 	.disable = regulator_disable_regmap,
184 	.set_over_current_protection = stpmic1_set_icc,
185 };
186 
187 static const struct regulator_ops stpmic1_switch_regul_ops = {
188 	.is_enabled = regulator_is_enabled_regmap,
189 	.enable = regulator_enable_regmap,
190 	.disable = regulator_disable_regmap,
191 	.set_over_current_protection = stpmic1_set_icc,
192 	.set_active_discharge = regulator_set_active_discharge_regmap,
193 };
194 
195 #define REG_LDO(ids, base) { \
196 	.name = #ids, \
197 	.id = STPMIC1_##ids, \
198 	.n_voltages = 32, \
199 	.ops = &stpmic1_ldo_ops, \
200 	.linear_ranges = base ## _ranges, \
201 	.n_linear_ranges = ARRAY_SIZE(base ## _ranges), \
202 	.type = REGULATOR_VOLTAGE, \
203 	.owner = THIS_MODULE, \
204 	.vsel_reg = ids##_ACTIVE_CR, \
205 	.vsel_mask = LDO_VOLTAGE_MASK, \
206 	.enable_reg = ids##_ACTIVE_CR, \
207 	.enable_mask = LDO_ENABLE_MASK, \
208 	.enable_val = 1, \
209 	.disable_val = 0, \
210 	.enable_time = PMIC_ENABLE_TIME_US, \
211 	.supply_name = #base, \
212 }
213 
214 #define REG_LDO3(ids, base) { \
215 	.name = #ids, \
216 	.id = STPMIC1_##ids, \
217 	.n_voltages = 32, \
218 	.ops = &stpmic1_ldo3_ops, \
219 	.linear_ranges = ldo3_ranges, \
220 	.n_linear_ranges = ARRAY_SIZE(ldo3_ranges), \
221 	.type = REGULATOR_VOLTAGE, \
222 	.owner = THIS_MODULE, \
223 	.vsel_reg = LDO3_ACTIVE_CR, \
224 	.vsel_mask = LDO_VOLTAGE_MASK, \
225 	.enable_reg = LDO3_ACTIVE_CR, \
226 	.enable_mask = LDO_ENABLE_MASK, \
227 	.enable_val = 1, \
228 	.disable_val = 0, \
229 	.enable_time = PMIC_ENABLE_TIME_US, \
230 	.bypass_reg = LDO3_ACTIVE_CR, \
231 	.bypass_mask = LDO_BYPASS_MASK, \
232 	.bypass_val_on = LDO_BYPASS_MASK, \
233 	.bypass_val_off = 0, \
234 	.supply_name = #base, \
235 }
236 
237 #define REG_LDO4(ids, base) { \
238 	.name = #ids, \
239 	.id = STPMIC1_##ids, \
240 	.n_voltages = 1, \
241 	.ops = &stpmic1_ldo4_fixed_regul_ops, \
242 	.type = REGULATOR_VOLTAGE, \
243 	.owner = THIS_MODULE, \
244 	.min_uV = 3300000, \
245 	.fixed_uV = 3300000, \
246 	.enable_reg = LDO4_ACTIVE_CR, \
247 	.enable_mask = LDO_ENABLE_MASK, \
248 	.enable_val = 1, \
249 	.disable_val = 0, \
250 	.enable_time = PMIC_ENABLE_TIME_US, \
251 	.supply_name = #base, \
252 }
253 
254 #define REG_BUCK(ids, base) { \
255 	.name = #ids, \
256 	.id = STPMIC1_##ids, \
257 	.ops = &stpmic1_buck_ops, \
258 	.n_voltages = 64, \
259 	.linear_ranges = base ## _ranges, \
260 	.n_linear_ranges = ARRAY_SIZE(base ## _ranges), \
261 	.type = REGULATOR_VOLTAGE, \
262 	.owner = THIS_MODULE, \
263 	.vsel_reg = ids##_ACTIVE_CR, \
264 	.vsel_mask = BUCK_VOLTAGE_MASK, \
265 	.enable_reg = ids##_ACTIVE_CR, \
266 	.enable_mask = BUCK_ENABLE_MASK, \
267 	.enable_val = 1, \
268 	.disable_val = 0, \
269 	.enable_time = PMIC_ENABLE_TIME_US, \
270 	.of_map_mode = stpmic1_map_mode, \
271 	.pull_down_reg = ids##_PULL_DOWN_REG, \
272 	.pull_down_mask = ids##_PULL_DOWN_MASK, \
273 	.supply_name = #base, \
274 }
275 
276 #define REG_VREF_DDR(ids, base) { \
277 	.name = #ids, \
278 	.id = STPMIC1_##ids, \
279 	.n_voltages = 1, \
280 	.ops = &stpmic1_vref_ddr_ops, \
281 	.type = REGULATOR_VOLTAGE, \
282 	.owner = THIS_MODULE, \
283 	.min_uV = 500000, \
284 	.fixed_uV = 500000, \
285 	.enable_reg = VREF_DDR_ACTIVE_CR, \
286 	.enable_mask = BUCK_ENABLE_MASK, \
287 	.enable_val = 1, \
288 	.disable_val = 0, \
289 	.enable_time = PMIC_ENABLE_TIME_US, \
290 	.supply_name = #base, \
291 }
292 
293 #define REG_BOOST(ids, base) { \
294 	.name = #ids, \
295 	.id = STPMIC1_##ids, \
296 	.n_voltages = 1, \
297 	.ops = &stpmic1_boost_regul_ops, \
298 	.type = REGULATOR_VOLTAGE, \
299 	.owner = THIS_MODULE, \
300 	.min_uV = 0, \
301 	.fixed_uV = 5000000, \
302 	.enable_reg = BST_SW_CR, \
303 	.enable_mask = BOOST_ENABLED, \
304 	.enable_val = BOOST_ENABLED, \
305 	.disable_val = 0, \
306 	.enable_time = PMIC_ENABLE_TIME_US, \
307 	.supply_name = #base, \
308 }
309 
310 #define REG_VBUS_OTG(ids, base) { \
311 	.name = #ids, \
312 	.id = STPMIC1_##ids, \
313 	.n_voltages = 1, \
314 	.ops = &stpmic1_switch_regul_ops, \
315 	.type = REGULATOR_VOLTAGE, \
316 	.owner = THIS_MODULE, \
317 	.min_uV = 0, \
318 	.fixed_uV = 5000000, \
319 	.enable_reg = BST_SW_CR, \
320 	.enable_mask = USBSW_OTG_SWITCH_ENABLED, \
321 	.enable_val = USBSW_OTG_SWITCH_ENABLED, \
322 	.disable_val = 0, \
323 	.enable_time = PMIC_ENABLE_TIME_US, \
324 	.supply_name = #base, \
325 	.active_discharge_reg = BST_SW_CR, \
326 	.active_discharge_mask = VBUS_OTG_DISCHARGE, \
327 	.active_discharge_on = VBUS_OTG_DISCHARGE, \
328 }
329 
330 #define REG_SW_OUT(ids, base) { \
331 	.name = #ids, \
332 	.id = STPMIC1_##ids, \
333 	.n_voltages = 1, \
334 	.ops = &stpmic1_switch_regul_ops, \
335 	.type = REGULATOR_VOLTAGE, \
336 	.owner = THIS_MODULE, \
337 	.min_uV = 0, \
338 	.fixed_uV = 5000000, \
339 	.enable_reg = BST_SW_CR, \
340 	.enable_mask = SWIN_SWOUT_ENABLED, \
341 	.enable_val = SWIN_SWOUT_ENABLED, \
342 	.disable_val = 0, \
343 	.enable_time = PMIC_ENABLE_TIME_US, \
344 	.supply_name = #base, \
345 	.active_discharge_reg = BST_SW_CR, \
346 	.active_discharge_mask = SW_OUT_DISCHARGE, \
347 	.active_discharge_on = SW_OUT_DISCHARGE, \
348 }
349 
350 static const struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = {
351 	[STPMIC1_BUCK1] = {
352 		.desc = REG_BUCK(BUCK1, buck1),
353 		.icc_reg = BUCKS_ICCTO_CR,
354 		.icc_mask = BIT(0),
355 		.mask_reset_reg = BUCKS_MASK_RESET_CR,
356 		.mask_reset_mask = BIT(0),
357 	},
358 	[STPMIC1_BUCK2] = {
359 		.desc = REG_BUCK(BUCK2, buck2),
360 		.icc_reg = BUCKS_ICCTO_CR,
361 		.icc_mask = BIT(1),
362 		.mask_reset_reg = BUCKS_MASK_RESET_CR,
363 		.mask_reset_mask = BIT(1),
364 	},
365 	[STPMIC1_BUCK3] = {
366 		.desc = REG_BUCK(BUCK3, buck3),
367 		.icc_reg = BUCKS_ICCTO_CR,
368 		.icc_mask = BIT(2),
369 		.mask_reset_reg = BUCKS_MASK_RESET_CR,
370 		.mask_reset_mask = BIT(2),
371 	},
372 	[STPMIC1_BUCK4] = {
373 		.desc = REG_BUCK(BUCK4, buck4),
374 		.icc_reg = BUCKS_ICCTO_CR,
375 		.icc_mask = BIT(3),
376 		.mask_reset_reg = BUCKS_MASK_RESET_CR,
377 		.mask_reset_mask = BIT(3),
378 	},
379 	[STPMIC1_LDO1] = {
380 		.desc = REG_LDO(LDO1, ldo1),
381 		.icc_reg = LDOS_ICCTO_CR,
382 		.icc_mask = BIT(0),
383 		.mask_reset_reg = LDOS_MASK_RESET_CR,
384 		.mask_reset_mask = BIT(0),
385 	},
386 	[STPMIC1_LDO2] = {
387 		.desc = REG_LDO(LDO2, ldo2),
388 		.icc_reg = LDOS_ICCTO_CR,
389 		.icc_mask = BIT(1),
390 		.mask_reset_reg = LDOS_MASK_RESET_CR,
391 		.mask_reset_mask = BIT(1),
392 	},
393 	[STPMIC1_LDO3] = {
394 		.desc = REG_LDO3(LDO3, ldo3),
395 		.icc_reg = LDOS_ICCTO_CR,
396 		.icc_mask = BIT(2),
397 		.mask_reset_reg = LDOS_MASK_RESET_CR,
398 		.mask_reset_mask = BIT(2),
399 	},
400 	[STPMIC1_LDO4] = {
401 		.desc = REG_LDO4(LDO4, ldo4),
402 		.icc_reg = LDOS_ICCTO_CR,
403 		.icc_mask = BIT(3),
404 		.mask_reset_reg = LDOS_MASK_RESET_CR,
405 		.mask_reset_mask = BIT(3),
406 	},
407 	[STPMIC1_LDO5] = {
408 		.desc = REG_LDO(LDO5, ldo5),
409 		.icc_reg = LDOS_ICCTO_CR,
410 		.icc_mask = BIT(4),
411 		.mask_reset_reg = LDOS_MASK_RESET_CR,
412 		.mask_reset_mask = BIT(4),
413 	},
414 	[STPMIC1_LDO6] = {
415 		.desc = REG_LDO(LDO6, ldo6),
416 		.icc_reg = LDOS_ICCTO_CR,
417 		.icc_mask = BIT(5),
418 		.mask_reset_reg = LDOS_MASK_RESET_CR,
419 		.mask_reset_mask = BIT(5),
420 	},
421 	[STPMIC1_VREF_DDR] = {
422 		.desc = REG_VREF_DDR(VREF_DDR, vref_ddr),
423 		.mask_reset_reg = LDOS_MASK_RESET_CR,
424 		.mask_reset_mask = BIT(6),
425 	},
426 	[STPMIC1_BOOST] = {
427 		.desc = REG_BOOST(BOOST, boost),
428 		.icc_reg = BUCKS_ICCTO_CR,
429 		.icc_mask = BIT(6),
430 	},
431 	[STPMIC1_VBUS_OTG] = {
432 		.desc = REG_VBUS_OTG(VBUS_OTG, pwr_sw1),
433 		.icc_reg = BUCKS_ICCTO_CR,
434 		.icc_mask = BIT(4),
435 	},
436 	[STPMIC1_SW_OUT] = {
437 		.desc = REG_SW_OUT(SW_OUT, pwr_sw2),
438 		.icc_reg = BUCKS_ICCTO_CR,
439 		.icc_mask = BIT(5),
440 	},
441 };
442 
443 static unsigned int stpmic1_map_mode(unsigned int mode)
444 {
445 	switch (mode) {
446 	case STPMIC1_BUCK_MODE_NORMAL:
447 		return REGULATOR_MODE_NORMAL;
448 	case STPMIC1_BUCK_MODE_LP:
449 		return REGULATOR_MODE_STANDBY;
450 	default:
451 		return REGULATOR_MODE_INVALID;
452 	}
453 }
454 
455 static unsigned int stpmic1_get_mode(struct regulator_dev *rdev)
456 {
457 	int value;
458 	struct regmap *regmap = rdev_get_regmap(rdev);
459 
460 	regmap_read(regmap, rdev->desc->enable_reg, &value);
461 
462 	if (value & STPMIC1_BUCK_MODE_LP)
463 		return REGULATOR_MODE_STANDBY;
464 
465 	return REGULATOR_MODE_NORMAL;
466 }
467 
468 static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode)
469 {
470 	int value;
471 	struct regmap *regmap = rdev_get_regmap(rdev);
472 
473 	switch (mode) {
474 	case REGULATOR_MODE_NORMAL:
475 		value = STPMIC1_BUCK_MODE_NORMAL;
476 		break;
477 	case REGULATOR_MODE_STANDBY:
478 		value = STPMIC1_BUCK_MODE_LP;
479 		break;
480 	default:
481 		return -EINVAL;
482 	}
483 
484 	return regmap_update_bits(regmap, rdev->desc->enable_reg,
485 				  STPMIC1_BUCK_MODE_LP, value);
486 }
487 
488 static int stpmic1_set_icc(struct regulator_dev *rdev)
489 {
490 	struct stpmic1_regulator_cfg *cfg = rdev_get_drvdata(rdev);
491 	struct regmap *regmap = rdev_get_regmap(rdev);
492 
493 	/* enable switch off in case of over current */
494 	return regmap_update_bits(regmap, cfg->icc_reg, cfg->icc_mask,
495 				  cfg->icc_mask);
496 }
497 
498 static irqreturn_t stpmic1_curlim_irq_handler(int irq, void *data)
499 {
500 	struct regulator_dev *rdev = (struct regulator_dev *)data;
501 
502 	regulator_lock(rdev);
503 
504 	/* Send an overcurrent notification */
505 	regulator_notifier_call_chain(rdev,
506 				      REGULATOR_EVENT_OVER_CURRENT,
507 				      NULL);
508 
509 	regulator_unlock(rdev);
510 
511 	return IRQ_HANDLED;
512 }
513 
514 #define MATCH(_name, _id) \
515 	[STPMIC1_##_id] = { \
516 		.name = #_name, \
517 		.desc = &stpmic1_regulator_cfgs[STPMIC1_##_id].desc, \
518 	}
519 
520 static struct of_regulator_match stpmic1_matches[] = {
521 	MATCH(buck1, BUCK1),
522 	MATCH(buck2, BUCK2),
523 	MATCH(buck3, BUCK3),
524 	MATCH(buck4, BUCK4),
525 	MATCH(ldo1, LDO1),
526 	MATCH(ldo2, LDO2),
527 	MATCH(ldo3, LDO3),
528 	MATCH(ldo4, LDO4),
529 	MATCH(ldo5, LDO5),
530 	MATCH(ldo6, LDO6),
531 	MATCH(vref_ddr, VREF_DDR),
532 	MATCH(boost, BOOST),
533 	MATCH(pwr_sw1, VBUS_OTG),
534 	MATCH(pwr_sw2, SW_OUT),
535 };
536 
537 static int stpmic1_regulator_register(struct platform_device *pdev, int id,
538 				      struct of_regulator_match *match,
539 				      const struct stpmic1_regulator_cfg *cfg)
540 {
541 	struct stpmic1 *pmic_dev = dev_get_drvdata(pdev->dev.parent);
542 	struct regulator_dev *rdev;
543 	struct regulator_config config = {};
544 	int ret = 0;
545 	int irq;
546 
547 	config.dev = &pdev->dev;
548 	config.init_data = match->init_data;
549 	config.of_node = match->of_node;
550 	config.regmap = pmic_dev->regmap;
551 	config.driver_data = (void *)cfg;
552 
553 	rdev = devm_regulator_register(&pdev->dev, &cfg->desc, &config);
554 	if (IS_ERR(rdev)) {
555 		dev_err(&pdev->dev, "failed to register %s regulator\n",
556 			cfg->desc.name);
557 		return PTR_ERR(rdev);
558 	}
559 
560 	/* set mask reset */
561 	if (of_get_property(config.of_node, "st,mask-reset", NULL) &&
562 	    cfg->mask_reset_reg != 0) {
563 		ret = regmap_update_bits(pmic_dev->regmap,
564 					 cfg->mask_reset_reg,
565 					 cfg->mask_reset_mask,
566 					 cfg->mask_reset_mask);
567 		if (ret) {
568 			dev_err(&pdev->dev, "set mask reset failed\n");
569 			return ret;
570 		}
571 	}
572 
573 	/* setup an irq handler for over-current detection */
574 	irq = of_irq_get(config.of_node, 0);
575 	if (irq > 0) {
576 		ret = devm_request_threaded_irq(&pdev->dev,
577 						irq, NULL,
578 						stpmic1_curlim_irq_handler,
579 						IRQF_ONESHOT | IRQF_SHARED,
580 						pdev->name, rdev);
581 		if (ret) {
582 			dev_err(&pdev->dev, "Request IRQ failed\n");
583 			return ret;
584 		}
585 	}
586 	return 0;
587 }
588 
589 static int stpmic1_regulator_probe(struct platform_device *pdev)
590 {
591 	int i, ret;
592 
593 	ret = of_regulator_match(&pdev->dev, pdev->dev.of_node, stpmic1_matches,
594 				 ARRAY_SIZE(stpmic1_matches));
595 	if (ret < 0) {
596 		dev_err(&pdev->dev,
597 			"Error in PMIC regulator device tree node");
598 		return ret;
599 	}
600 
601 	for (i = 0; i < ARRAY_SIZE(stpmic1_regulator_cfgs); i++) {
602 		ret = stpmic1_regulator_register(pdev, i, &stpmic1_matches[i],
603 						 &stpmic1_regulator_cfgs[i]);
604 		if (ret < 0)
605 			return ret;
606 	}
607 
608 	dev_dbg(&pdev->dev, "stpmic1_regulator driver probed\n");
609 
610 	return 0;
611 }
612 
613 static const struct of_device_id of_pmic_regulator_match[] = {
614 	{ .compatible = "st,stpmic1-regulators" },
615 	{ },
616 };
617 
618 MODULE_DEVICE_TABLE(of, of_pmic_regulator_match);
619 
620 static struct platform_driver stpmic1_regulator_driver = {
621 	.driver = {
622 		.name = "stpmic1-regulator",
623 		.of_match_table = of_match_ptr(of_pmic_regulator_match),
624 	},
625 	.probe = stpmic1_regulator_probe,
626 };
627 
628 module_platform_driver(stpmic1_regulator_driver);
629 
630 MODULE_DESCRIPTION("STPMIC1 PMIC voltage regulator driver");
631 MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
632 MODULE_LICENSE("GPL v2");
633