1 // SPDX-License-Identifier: GPL-2.0-only 2 3 #include <linux/mfd/sm5703.h> 4 #include <linux/module.h> 5 #include <linux/mod_devicetable.h> 6 #include <linux/platform_device.h> 7 #include <linux/regmap.h> 8 #include <linux/regulator/driver.h> 9 #include <linux/regulator/of_regulator.h> 10 11 enum sm5703_regulators { 12 SM5703_BUCK, 13 SM5703_LDO1, 14 SM5703_LDO2, 15 SM5703_LDO3, 16 SM5703_USBLDO1, 17 SM5703_USBLDO2, 18 SM5703_VBUS, 19 SM5703_MAX_REGULATORS, 20 }; 21 22 static const int sm5703_ldo_voltagemap[] = { 23 1500000, 1800000, 2600000, 2800000, 3000000, 3300000, 24 }; 25 26 static const int sm5703_buck_voltagemap[] = { 27 1000000, 1000000, 1000000, 1000000, 28 1000000, 1000000, 1000000, 1000000, 29 1000000, 1000000, 1000000, 1100000, 30 1200000, 1300000, 1400000, 1500000, 31 1600000, 1700000, 1800000, 1900000, 32 2000000, 2100000, 2200000, 2300000, 33 2400000, 2500000, 2600000, 2700000, 34 2800000, 2900000, 3000000, 3000000, 35 }; 36 37 #define SM5703USBLDO(_name, _id) \ 38 [SM5703_USBLDO ## _id] = { \ 39 .name = _name, \ 40 .of_match = _name, \ 41 .regulators_node = "regulators", \ 42 .type = REGULATOR_VOLTAGE, \ 43 .id = SM5703_USBLDO ## _id, \ 44 .ops = &sm5703_regulator_ops_fixed, \ 45 .n_voltages = 1, \ 46 .fixed_uV = SM5703_USBLDO_MICROVOLT, \ 47 .enable_reg = SM5703_REG_USBLDO12, \ 48 .enable_mask = SM5703_REG_EN_USBLDO ##_id, \ 49 .owner = THIS_MODULE, \ 50 } 51 52 #define SM5703VBUS(_name) \ 53 [SM5703_VBUS] = { \ 54 .name = _name, \ 55 .of_match = _name, \ 56 .regulators_node = "regulators", \ 57 .type = REGULATOR_VOLTAGE, \ 58 .id = SM5703_VBUS, \ 59 .ops = &sm5703_regulator_ops_fixed, \ 60 .n_voltages = 1, \ 61 .fixed_uV = SM5703_VBUS_MICROVOLT, \ 62 .enable_reg = SM5703_REG_CNTL, \ 63 .enable_mask = SM5703_OPERATION_MODE_MASK, \ 64 .enable_val = SM5703_OPERATION_MODE_USB_OTG_MODE, \ 65 .disable_val = SM5703_OPERATION_MODE_CHARGING_ON, \ 66 .owner = THIS_MODULE, \ 67 } 68 69 #define SM5703BUCK(_name) \ 70 [SM5703_BUCK] = { \ 71 .name = _name, \ 72 .of_match = _name, \ 73 .regulators_node = "regulators", \ 74 .type = REGULATOR_VOLTAGE, \ 75 .id = SM5703_BUCK, \ 76 .ops = &sm5703_regulator_ops, \ 77 .n_voltages = ARRAY_SIZE(sm5703_buck_voltagemap), \ 78 .volt_table = sm5703_buck_voltagemap, \ 79 .vsel_reg = SM5703_REG_BUCK, \ 80 .vsel_mask = SM5703_BUCK_VOLT_MASK, \ 81 .enable_reg = SM5703_REG_BUCK, \ 82 .enable_mask = SM5703_REG_EN_BUCK, \ 83 .owner = THIS_MODULE, \ 84 } 85 86 #define SM5703LDO(_name, _id) \ 87 [SM5703_LDO ## _id] = { \ 88 .name = _name, \ 89 .of_match = _name, \ 90 .regulators_node = "regulators", \ 91 .type = REGULATOR_VOLTAGE, \ 92 .id = SM5703_LDO ## _id, \ 93 .ops = &sm5703_regulator_ops, \ 94 .n_voltages = ARRAY_SIZE(sm5703_ldo_voltagemap), \ 95 .volt_table = sm5703_ldo_voltagemap, \ 96 .vsel_reg = SM5703_REG_LDO ##_id, \ 97 .vsel_mask = SM5703_LDO_VOLT_MASK, \ 98 .enable_reg = SM5703_REG_LDO ##_id, \ 99 .enable_mask = SM5703_LDO_EN, \ 100 .owner = THIS_MODULE, \ 101 } 102 103 static const struct regulator_ops sm5703_regulator_ops = { 104 .enable = regulator_enable_regmap, 105 .disable = regulator_disable_regmap, 106 .is_enabled = regulator_is_enabled_regmap, 107 .list_voltage = regulator_list_voltage_table, 108 .get_voltage_sel = regulator_get_voltage_sel_regmap, 109 .set_voltage_sel = regulator_set_voltage_sel_regmap, 110 }; 111 112 static const struct regulator_ops sm5703_regulator_ops_fixed = { 113 .enable = regulator_enable_regmap, 114 .disable = regulator_disable_regmap, 115 .is_enabled = regulator_is_enabled_regmap, 116 }; 117 118 static struct regulator_desc sm5703_regulators_desc[SM5703_MAX_REGULATORS] = { 119 SM5703BUCK("buck"), 120 SM5703LDO("ldo1", 1), 121 SM5703LDO("ldo2", 2), 122 SM5703LDO("ldo3", 3), 123 SM5703USBLDO("usbldo1", 1), 124 SM5703USBLDO("usbldo2", 2), 125 SM5703VBUS("vbus"), 126 }; 127 128 static int sm5703_regulator_probe(struct platform_device *pdev) 129 { 130 struct device *dev = &pdev->dev; 131 struct regulator_config config = { NULL, }; 132 struct regulator_dev *rdev; 133 struct sm5703_dev *sm5703 = dev_get_drvdata(pdev->dev.parent); 134 int i; 135 136 config.dev = dev->parent; 137 config.regmap = sm5703->regmap; 138 139 for (i = 0; i < SM5703_MAX_REGULATORS; i++) { 140 rdev = devm_regulator_register(dev, 141 &sm5703_regulators_desc[i], 142 &config); 143 if (IS_ERR(rdev)) 144 return dev_err_probe(dev, PTR_ERR(rdev), 145 "Failed to register a regulator\n"); 146 } 147 148 return 0; 149 } 150 151 static const struct platform_device_id sm5703_regulator_id[] = { 152 { "sm5703-regulator", 0 }, 153 {} 154 }; 155 MODULE_DEVICE_TABLE(platform, sm5703_regulator_id); 156 157 static struct platform_driver sm5703_regulator_driver = { 158 .driver = { 159 .name = "sm5703-regulator", 160 }, 161 .probe = sm5703_regulator_probe, 162 .id_table = sm5703_regulator_id, 163 }; 164 165 module_platform_driver(sm5703_regulator_driver); 166 167 MODULE_DESCRIPTION("Silicon Mitus SM5703 LDO/Buck/USB regulator driver"); 168 MODULE_AUTHOR("Markuss Broks <markuss.broks@gmail.com>"); 169 MODULE_LICENSE("GPL"); 170