xref: /openbmc/linux/drivers/regulator/s2mpa01.c (revision e2ad626f)
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Copyright (c) 2013 Samsung Electronics Co., Ltd
4 //		http://www.samsung.com
5 
6 #include <linux/bug.h>
7 #include <linux/err.h>
8 #include <linux/slab.h>
9 #include <linux/module.h>
10 #include <linux/of.h>
11 #include <linux/regmap.h>
12 #include <linux/platform_device.h>
13 #include <linux/regulator/driver.h>
14 #include <linux/regulator/machine.h>
15 #include <linux/regulator/of_regulator.h>
16 #include <linux/mfd/samsung/core.h>
17 #include <linux/mfd/samsung/s2mpa01.h>
18 
19 struct s2mpa01_info {
20 	int ramp_delay24;
21 	int ramp_delay3;
22 	int ramp_delay5;
23 	int ramp_delay16;
24 	int ramp_delay7;
25 	int ramp_delay8910;
26 };
27 
28 static int get_ramp_delay(int ramp_delay)
29 {
30 	unsigned char cnt = 0;
31 
32 	ramp_delay /= 6250;
33 
34 	while (true) {
35 		ramp_delay = ramp_delay >> 1;
36 		if (ramp_delay == 0)
37 			break;
38 		cnt++;
39 	}
40 
41 	if (cnt > 3)
42 		cnt = 3;
43 
44 	return cnt;
45 }
46 
47 static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
48 				   unsigned int old_selector,
49 				   unsigned int new_selector)
50 {
51 	struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
52 	unsigned int ramp_delay = 0;
53 	int old_volt, new_volt;
54 
55 	switch (rdev_get_id(rdev)) {
56 	case S2MPA01_BUCK2:
57 	case S2MPA01_BUCK4:
58 		ramp_delay = s2mpa01->ramp_delay24;
59 		break;
60 	case S2MPA01_BUCK3:
61 		ramp_delay = s2mpa01->ramp_delay3;
62 		break;
63 	case S2MPA01_BUCK5:
64 		ramp_delay = s2mpa01->ramp_delay5;
65 		break;
66 	case S2MPA01_BUCK1:
67 	case S2MPA01_BUCK6:
68 		ramp_delay = s2mpa01->ramp_delay16;
69 		break;
70 	case S2MPA01_BUCK7:
71 		ramp_delay = s2mpa01->ramp_delay7;
72 		break;
73 	case S2MPA01_BUCK8:
74 	case S2MPA01_BUCK9:
75 	case S2MPA01_BUCK10:
76 		ramp_delay = s2mpa01->ramp_delay8910;
77 		break;
78 	}
79 
80 	if (ramp_delay == 0)
81 		ramp_delay = rdev->desc->ramp_delay;
82 
83 	old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
84 	new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
85 
86 	return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
87 }
88 
89 static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
90 {
91 	struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
92 	unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2;
93 	unsigned int ramp_enable = 1, enable_shift = 0;
94 	int ret;
95 
96 	switch (rdev_get_id(rdev)) {
97 	case S2MPA01_BUCK1:
98 		enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT;
99 		if (!ramp_delay) {
100 			ramp_enable = 0;
101 			break;
102 		}
103 
104 		if (ramp_delay > s2mpa01->ramp_delay16)
105 			s2mpa01->ramp_delay16 = ramp_delay;
106 		else
107 			ramp_delay = s2mpa01->ramp_delay16;
108 
109 		ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
110 		break;
111 	case S2MPA01_BUCK2:
112 		enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT;
113 		if (!ramp_delay) {
114 			ramp_enable = 0;
115 			break;
116 		}
117 
118 		if (ramp_delay > s2mpa01->ramp_delay24)
119 			s2mpa01->ramp_delay24 = ramp_delay;
120 		else
121 			ramp_delay = s2mpa01->ramp_delay24;
122 
123 		ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
124 		ramp_reg = S2MPA01_REG_RAMP1;
125 		break;
126 	case S2MPA01_BUCK3:
127 		enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT;
128 		if (!ramp_delay) {
129 			ramp_enable = 0;
130 			break;
131 		}
132 
133 		s2mpa01->ramp_delay3 = ramp_delay;
134 		ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT;
135 		ramp_reg = S2MPA01_REG_RAMP1;
136 		break;
137 	case S2MPA01_BUCK4:
138 		enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT;
139 		if (!ramp_delay) {
140 			ramp_enable = 0;
141 			break;
142 		}
143 
144 		if (ramp_delay > s2mpa01->ramp_delay24)
145 			s2mpa01->ramp_delay24 = ramp_delay;
146 		else
147 			ramp_delay = s2mpa01->ramp_delay24;
148 
149 		ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
150 		ramp_reg = S2MPA01_REG_RAMP1;
151 		break;
152 	case S2MPA01_BUCK5:
153 		s2mpa01->ramp_delay5 = ramp_delay;
154 		ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT;
155 		break;
156 	case S2MPA01_BUCK6:
157 		if (ramp_delay > s2mpa01->ramp_delay16)
158 			s2mpa01->ramp_delay16 = ramp_delay;
159 		else
160 			ramp_delay = s2mpa01->ramp_delay16;
161 
162 		ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
163 		break;
164 	case S2MPA01_BUCK7:
165 		s2mpa01->ramp_delay7 = ramp_delay;
166 		ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT;
167 		break;
168 	case S2MPA01_BUCK8:
169 	case S2MPA01_BUCK9:
170 	case S2MPA01_BUCK10:
171 		if (ramp_delay > s2mpa01->ramp_delay8910)
172 			s2mpa01->ramp_delay8910 = ramp_delay;
173 		else
174 			ramp_delay = s2mpa01->ramp_delay8910;
175 
176 		ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT;
177 		break;
178 	default:
179 		return 0;
180 	}
181 
182 	if (!ramp_enable)
183 		goto ramp_disable;
184 
185 	/* Ramp delay can be enabled/disabled only for buck[1234] */
186 	if (rdev_get_id(rdev) >= S2MPA01_BUCK1 &&
187 			rdev_get_id(rdev) <= S2MPA01_BUCK4) {
188 		ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
189 					 1 << enable_shift, 1 << enable_shift);
190 		if (ret) {
191 			dev_err(&rdev->dev, "failed to enable ramp rate\n");
192 			return ret;
193 		}
194 	}
195 
196 	ramp_val = get_ramp_delay(ramp_delay);
197 
198 	return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
199 				  ramp_val << ramp_shift);
200 
201 ramp_disable:
202 	return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
203 				  1 << enable_shift, 0);
204 }
205 
206 static const struct regulator_ops s2mpa01_ldo_ops = {
207 	.list_voltage		= regulator_list_voltage_linear,
208 	.map_voltage		= regulator_map_voltage_linear,
209 	.is_enabled		= regulator_is_enabled_regmap,
210 	.enable			= regulator_enable_regmap,
211 	.disable		= regulator_disable_regmap,
212 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
213 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
214 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
215 };
216 
217 static const struct regulator_ops s2mpa01_buck_ops = {
218 	.list_voltage		= regulator_list_voltage_linear,
219 	.map_voltage		= regulator_map_voltage_linear,
220 	.is_enabled		= regulator_is_enabled_regmap,
221 	.enable			= regulator_enable_regmap,
222 	.disable		= regulator_disable_regmap,
223 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
224 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
225 	.set_voltage_time_sel	= s2mpa01_regulator_set_voltage_time_sel,
226 	.set_ramp_delay		= s2mpa01_set_ramp_delay,
227 };
228 
229 #define regulator_desc_ldo(num, step) {			\
230 	.name		= "LDO"#num,			\
231 	.of_match	= of_match_ptr("LDO"#num),	\
232 	.regulators_node = of_match_ptr("regulators"),	\
233 	.id		= S2MPA01_LDO##num,		\
234 	.ops		= &s2mpa01_ldo_ops,		\
235 	.type		= REGULATOR_VOLTAGE,		\
236 	.owner		= THIS_MODULE,			\
237 	.min_uV		= MIN_800_MV,			\
238 	.uV_step	= step,				\
239 	.n_voltages	= S2MPA01_LDO_N_VOLTAGES,	\
240 	.vsel_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
241 	.vsel_mask	= S2MPA01_LDO_VSEL_MASK,	\
242 	.enable_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
243 	.enable_mask	= S2MPA01_ENABLE_MASK		\
244 }
245 
246 #define regulator_desc_buck1_4(num)	{			\
247 	.name		= "BUCK"#num,				\
248 	.of_match	= of_match_ptr("BUCK"#num),		\
249 	.regulators_node = of_match_ptr("regulators"),		\
250 	.id		= S2MPA01_BUCK##num,			\
251 	.ops		= &s2mpa01_buck_ops,			\
252 	.type		= REGULATOR_VOLTAGE,			\
253 	.owner		= THIS_MODULE,				\
254 	.min_uV		= MIN_600_MV,				\
255 	.uV_step	= STEP_6_25_MV,				\
256 	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
257 	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
258 	.vsel_reg	= S2MPA01_REG_B1CTRL2 + (num - 1) * 2,	\
259 	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
260 	.enable_reg	= S2MPA01_REG_B1CTRL1 + (num - 1) * 2,	\
261 	.enable_mask	= S2MPA01_ENABLE_MASK			\
262 }
263 
264 #define regulator_desc_buck5	{				\
265 	.name		= "BUCK5",				\
266 	.of_match	= of_match_ptr("BUCK5"),		\
267 	.regulators_node = of_match_ptr("regulators"),		\
268 	.id		= S2MPA01_BUCK5,			\
269 	.ops		= &s2mpa01_buck_ops,			\
270 	.type		= REGULATOR_VOLTAGE,			\
271 	.owner		= THIS_MODULE,				\
272 	.min_uV		= MIN_800_MV,				\
273 	.uV_step	= STEP_6_25_MV,				\
274 	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
275 	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
276 	.vsel_reg	= S2MPA01_REG_B5CTRL2,			\
277 	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
278 	.enable_reg	= S2MPA01_REG_B5CTRL1,			\
279 	.enable_mask	= S2MPA01_ENABLE_MASK			\
280 }
281 
282 #define regulator_desc_buck6_10(num, min, step) {			\
283 	.name		= "BUCK"#num,				\
284 	.of_match	= of_match_ptr("BUCK"#num),		\
285 	.regulators_node = of_match_ptr("regulators"),		\
286 	.id		= S2MPA01_BUCK##num,			\
287 	.ops		= &s2mpa01_buck_ops,			\
288 	.type		= REGULATOR_VOLTAGE,			\
289 	.owner		= THIS_MODULE,				\
290 	.min_uV		= min,					\
291 	.uV_step	= step,					\
292 	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
293 	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
294 	.vsel_reg	= S2MPA01_REG_B6CTRL2 + (num - 6) * 2,	\
295 	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
296 	.enable_reg	= S2MPA01_REG_B6CTRL1 + (num - 6) * 2,	\
297 	.enable_mask	= S2MPA01_ENABLE_MASK			\
298 }
299 
300 static const struct regulator_desc regulators[] = {
301 	regulator_desc_ldo(1, STEP_25_MV),
302 	regulator_desc_ldo(2, STEP_50_MV),
303 	regulator_desc_ldo(3, STEP_50_MV),
304 	regulator_desc_ldo(4, STEP_50_MV),
305 	regulator_desc_ldo(5, STEP_25_MV),
306 	regulator_desc_ldo(6, STEP_25_MV),
307 	regulator_desc_ldo(7, STEP_50_MV),
308 	regulator_desc_ldo(8, STEP_50_MV),
309 	regulator_desc_ldo(9, STEP_50_MV),
310 	regulator_desc_ldo(10, STEP_50_MV),
311 	regulator_desc_ldo(11, STEP_50_MV),
312 	regulator_desc_ldo(12, STEP_50_MV),
313 	regulator_desc_ldo(13, STEP_50_MV),
314 	regulator_desc_ldo(14, STEP_50_MV),
315 	regulator_desc_ldo(15, STEP_50_MV),
316 	regulator_desc_ldo(16, STEP_50_MV),
317 	regulator_desc_ldo(17, STEP_50_MV),
318 	regulator_desc_ldo(18, STEP_50_MV),
319 	regulator_desc_ldo(19, STEP_50_MV),
320 	regulator_desc_ldo(20, STEP_50_MV),
321 	regulator_desc_ldo(21, STEP_50_MV),
322 	regulator_desc_ldo(22, STEP_50_MV),
323 	regulator_desc_ldo(23, STEP_50_MV),
324 	regulator_desc_ldo(24, STEP_50_MV),
325 	regulator_desc_ldo(25, STEP_50_MV),
326 	regulator_desc_ldo(26, STEP_25_MV),
327 	regulator_desc_buck1_4(1),
328 	regulator_desc_buck1_4(2),
329 	regulator_desc_buck1_4(3),
330 	regulator_desc_buck1_4(4),
331 	regulator_desc_buck5,
332 	regulator_desc_buck6_10(6, MIN_600_MV, STEP_6_25_MV),
333 	regulator_desc_buck6_10(7, MIN_600_MV, STEP_6_25_MV),
334 	regulator_desc_buck6_10(8, MIN_800_MV, STEP_12_5_MV),
335 	regulator_desc_buck6_10(9, MIN_1500_MV, STEP_12_5_MV),
336 	regulator_desc_buck6_10(10, MIN_1000_MV, STEP_12_5_MV),
337 };
338 
339 static int s2mpa01_pmic_probe(struct platform_device *pdev)
340 {
341 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
342 	struct regulator_config config = { };
343 	struct s2mpa01_info *s2mpa01;
344 	int i;
345 
346 	s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL);
347 	if (!s2mpa01)
348 		return -ENOMEM;
349 
350 	config.dev = iodev->dev;
351 	config.regmap = iodev->regmap_pmic;
352 	config.driver_data = s2mpa01;
353 
354 	for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) {
355 		struct regulator_dev *rdev;
356 
357 		rdev = devm_regulator_register(&pdev->dev,
358 						&regulators[i], &config);
359 		if (IS_ERR(rdev)) {
360 			dev_err(&pdev->dev, "regulator init failed for %d\n",
361 				i);
362 			return PTR_ERR(rdev);
363 		}
364 	}
365 
366 	return 0;
367 }
368 
369 static const struct platform_device_id s2mpa01_pmic_id[] = {
370 	{ "s2mpa01-pmic", 0},
371 	{ },
372 };
373 MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id);
374 
375 static struct platform_driver s2mpa01_pmic_driver = {
376 	.driver = {
377 		.name = "s2mpa01-pmic",
378 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
379 	},
380 	.probe = s2mpa01_pmic_probe,
381 	.id_table = s2mpa01_pmic_id,
382 };
383 
384 module_platform_driver(s2mpa01_pmic_driver);
385 
386 /* Module information */
387 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
388 MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>");
389 MODULE_DESCRIPTION("Samsung S2MPA01 Regulator Driver");
390 MODULE_LICENSE("GPL");
391