xref: /openbmc/linux/drivers/regulator/s2mpa01.c (revision 94cdda6b)
1 /*
2  * Copyright (c) 2013 Samsung Electronics Co., Ltd
3  *		http://www.samsung.com
4  *
5  *  This program is free software; you can redistribute  it and/or modify it
6  *  under  the terms of  the GNU General  Public License as published by the
7  *  Free Software Foundation;  either version 2 of the  License, or (at your
8  *  option) any later version.
9  *
10  */
11 
12 #include <linux/bug.h>
13 #include <linux/err.h>
14 #include <linux/gpio.h>
15 #include <linux/slab.h>
16 #include <linux/module.h>
17 #include <linux/of.h>
18 #include <linux/regmap.h>
19 #include <linux/platform_device.h>
20 #include <linux/regulator/driver.h>
21 #include <linux/regulator/machine.h>
22 #include <linux/regulator/of_regulator.h>
23 #include <linux/mfd/samsung/core.h>
24 #include <linux/mfd/samsung/s2mpa01.h>
25 
26 #define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators)
27 
28 struct s2mpa01_info {
29 	int ramp_delay24;
30 	int ramp_delay3;
31 	int ramp_delay5;
32 	int ramp_delay16;
33 	int ramp_delay7;
34 	int ramp_delay8910;
35 };
36 
37 static int get_ramp_delay(int ramp_delay)
38 {
39 	unsigned char cnt = 0;
40 
41 	ramp_delay /= 6250;
42 
43 	while (true) {
44 		ramp_delay = ramp_delay >> 1;
45 		if (ramp_delay == 0)
46 			break;
47 		cnt++;
48 	}
49 
50 	if (cnt > 3)
51 		cnt = 3;
52 
53 	return cnt;
54 }
55 
56 static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
57 				   unsigned int old_selector,
58 				   unsigned int new_selector)
59 {
60 	struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
61 	unsigned int ramp_delay = 0;
62 	int old_volt, new_volt;
63 
64 	switch (rdev_get_id(rdev)) {
65 	case S2MPA01_BUCK2:
66 	case S2MPA01_BUCK4:
67 		ramp_delay = s2mpa01->ramp_delay24;
68 		break;
69 	case S2MPA01_BUCK3:
70 		ramp_delay = s2mpa01->ramp_delay3;
71 		break;
72 	case S2MPA01_BUCK5:
73 		ramp_delay = s2mpa01->ramp_delay5;
74 		break;
75 	case S2MPA01_BUCK1:
76 	case S2MPA01_BUCK6:
77 		ramp_delay = s2mpa01->ramp_delay16;
78 		break;
79 	case S2MPA01_BUCK7:
80 		ramp_delay = s2mpa01->ramp_delay7;
81 		break;
82 	case S2MPA01_BUCK8:
83 	case S2MPA01_BUCK9:
84 	case S2MPA01_BUCK10:
85 		ramp_delay = s2mpa01->ramp_delay8910;
86 		break;
87 	}
88 
89 	if (ramp_delay == 0)
90 		ramp_delay = rdev->desc->ramp_delay;
91 
92 	old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
93 	new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
94 
95 	return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
96 }
97 
98 static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
99 {
100 	struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
101 	unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2;
102 	unsigned int ramp_enable = 1, enable_shift = 0;
103 	int ret;
104 
105 	switch (rdev_get_id(rdev)) {
106 	case S2MPA01_BUCK1:
107 		enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT;
108 		if (!ramp_delay) {
109 			ramp_enable = 0;
110 			break;
111 		}
112 
113 		if (ramp_delay > s2mpa01->ramp_delay16)
114 			s2mpa01->ramp_delay16 = ramp_delay;
115 		else
116 			ramp_delay = s2mpa01->ramp_delay16;
117 
118 		ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
119 		break;
120 	case S2MPA01_BUCK2:
121 		enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT;
122 		if (!ramp_delay) {
123 			ramp_enable = 0;
124 			break;
125 		}
126 
127 		if (ramp_delay > s2mpa01->ramp_delay24)
128 			s2mpa01->ramp_delay24 = ramp_delay;
129 		else
130 			ramp_delay = s2mpa01->ramp_delay24;
131 
132 		ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
133 		ramp_reg = S2MPA01_REG_RAMP1;
134 		break;
135 	case S2MPA01_BUCK3:
136 		enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT;
137 		if (!ramp_delay) {
138 			ramp_enable = 0;
139 			break;
140 		}
141 
142 		s2mpa01->ramp_delay3 = ramp_delay;
143 		ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT;
144 		ramp_reg = S2MPA01_REG_RAMP1;
145 		break;
146 	case S2MPA01_BUCK4:
147 		enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT;
148 		if (!ramp_delay) {
149 			ramp_enable = 0;
150 			break;
151 		}
152 
153 		if (ramp_delay > s2mpa01->ramp_delay24)
154 			s2mpa01->ramp_delay24 = ramp_delay;
155 		else
156 			ramp_delay = s2mpa01->ramp_delay24;
157 
158 		ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
159 		ramp_reg = S2MPA01_REG_RAMP1;
160 		break;
161 	case S2MPA01_BUCK5:
162 		s2mpa01->ramp_delay5 = ramp_delay;
163 		ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT;
164 		break;
165 	case S2MPA01_BUCK6:
166 		if (ramp_delay > s2mpa01->ramp_delay16)
167 			s2mpa01->ramp_delay16 = ramp_delay;
168 		else
169 			ramp_delay = s2mpa01->ramp_delay16;
170 
171 		ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
172 		break;
173 	case S2MPA01_BUCK7:
174 		s2mpa01->ramp_delay7 = ramp_delay;
175 		ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT;
176 		break;
177 	case S2MPA01_BUCK8:
178 	case S2MPA01_BUCK9:
179 	case S2MPA01_BUCK10:
180 		if (ramp_delay > s2mpa01->ramp_delay8910)
181 			s2mpa01->ramp_delay8910 = ramp_delay;
182 		else
183 			ramp_delay = s2mpa01->ramp_delay8910;
184 
185 		ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT;
186 		break;
187 	default:
188 		return 0;
189 	}
190 
191 	if (!ramp_enable)
192 		goto ramp_disable;
193 
194 	/* Ramp delay can be enabled/disabled only for buck[1234] */
195 	if (rdev_get_id(rdev) >= S2MPA01_BUCK1 &&
196 			rdev_get_id(rdev) <= S2MPA01_BUCK4) {
197 		ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
198 					 1 << enable_shift, 1 << enable_shift);
199 		if (ret) {
200 			dev_err(&rdev->dev, "failed to enable ramp rate\n");
201 			return ret;
202 		}
203 	}
204 
205 	ramp_val = get_ramp_delay(ramp_delay);
206 
207 	return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
208 				  ramp_val << ramp_shift);
209 
210 ramp_disable:
211 	return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
212 				  1 << enable_shift, 0);
213 }
214 
215 static struct regulator_ops s2mpa01_ldo_ops = {
216 	.list_voltage		= regulator_list_voltage_linear,
217 	.map_voltage		= regulator_map_voltage_linear,
218 	.is_enabled		= regulator_is_enabled_regmap,
219 	.enable			= regulator_enable_regmap,
220 	.disable		= regulator_disable_regmap,
221 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
222 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
223 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
224 };
225 
226 static struct regulator_ops s2mpa01_buck_ops = {
227 	.list_voltage		= regulator_list_voltage_linear,
228 	.map_voltage		= regulator_map_voltage_linear,
229 	.is_enabled		= regulator_is_enabled_regmap,
230 	.enable			= regulator_enable_regmap,
231 	.disable		= regulator_disable_regmap,
232 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
233 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
234 	.set_voltage_time_sel	= s2mpa01_regulator_set_voltage_time_sel,
235 	.set_ramp_delay		= s2mpa01_set_ramp_delay,
236 };
237 
238 #define regulator_desc_ldo(num, step) {			\
239 	.name		= "LDO"#num,			\
240 	.id		= S2MPA01_LDO##num,		\
241 	.ops		= &s2mpa01_ldo_ops,		\
242 	.type		= REGULATOR_VOLTAGE,		\
243 	.owner		= THIS_MODULE,			\
244 	.min_uV		= MIN_800_MV,			\
245 	.uV_step	= step,				\
246 	.n_voltages	= S2MPA01_LDO_N_VOLTAGES,	\
247 	.vsel_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
248 	.vsel_mask	= S2MPA01_LDO_VSEL_MASK,	\
249 	.enable_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
250 	.enable_mask	= S2MPA01_ENABLE_MASK		\
251 }
252 
253 #define regulator_desc_buck1_4(num)	{			\
254 	.name		= "BUCK"#num,				\
255 	.id		= S2MPA01_BUCK##num,			\
256 	.ops		= &s2mpa01_buck_ops,			\
257 	.type		= REGULATOR_VOLTAGE,			\
258 	.owner		= THIS_MODULE,				\
259 	.min_uV		= MIN_600_MV,				\
260 	.uV_step	= STEP_6_25_MV,				\
261 	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
262 	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
263 	.vsel_reg	= S2MPA01_REG_B1CTRL2 + (num - 1) * 2,	\
264 	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
265 	.enable_reg	= S2MPA01_REG_B1CTRL1 + (num - 1) * 2,	\
266 	.enable_mask	= S2MPA01_ENABLE_MASK			\
267 }
268 
269 #define regulator_desc_buck5	{				\
270 	.name		= "BUCK5",				\
271 	.id		= S2MPA01_BUCK5,			\
272 	.ops		= &s2mpa01_buck_ops,			\
273 	.type		= REGULATOR_VOLTAGE,			\
274 	.owner		= THIS_MODULE,				\
275 	.min_uV		= MIN_800_MV,				\
276 	.uV_step	= STEP_6_25_MV,				\
277 	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
278 	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
279 	.vsel_reg	= S2MPA01_REG_B5CTRL2,			\
280 	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
281 	.enable_reg	= S2MPA01_REG_B5CTRL1,			\
282 	.enable_mask	= S2MPA01_ENABLE_MASK			\
283 }
284 
285 #define regulator_desc_buck6_10(num, min, step) {			\
286 	.name		= "BUCK"#num,				\
287 	.id		= S2MPA01_BUCK##num,			\
288 	.ops		= &s2mpa01_buck_ops,			\
289 	.type		= REGULATOR_VOLTAGE,			\
290 	.owner		= THIS_MODULE,				\
291 	.min_uV		= min,					\
292 	.uV_step	= step,					\
293 	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
294 	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
295 	.vsel_reg	= S2MPA01_REG_B6CTRL2 + (num - 6) * 2,	\
296 	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
297 	.enable_reg	= S2MPA01_REG_B6CTRL1 + (num - 6) * 2,	\
298 	.enable_mask	= S2MPA01_ENABLE_MASK			\
299 }
300 
301 static const struct regulator_desc regulators[] = {
302 	regulator_desc_ldo(1, STEP_25_MV),
303 	regulator_desc_ldo(2, STEP_50_MV),
304 	regulator_desc_ldo(3, STEP_50_MV),
305 	regulator_desc_ldo(4, STEP_50_MV),
306 	regulator_desc_ldo(5, STEP_50_MV),
307 	regulator_desc_ldo(6, STEP_25_MV),
308 	regulator_desc_ldo(7, STEP_50_MV),
309 	regulator_desc_ldo(8, STEP_50_MV),
310 	regulator_desc_ldo(9, STEP_50_MV),
311 	regulator_desc_ldo(10, STEP_50_MV),
312 	regulator_desc_ldo(11, STEP_25_MV),
313 	regulator_desc_ldo(12, STEP_50_MV),
314 	regulator_desc_ldo(13, STEP_50_MV),
315 	regulator_desc_ldo(14, STEP_50_MV),
316 	regulator_desc_ldo(15, STEP_50_MV),
317 	regulator_desc_ldo(16, STEP_50_MV),
318 	regulator_desc_ldo(17, STEP_50_MV),
319 	regulator_desc_ldo(18, STEP_50_MV),
320 	regulator_desc_ldo(19, STEP_50_MV),
321 	regulator_desc_ldo(20, STEP_50_MV),
322 	regulator_desc_ldo(21, STEP_50_MV),
323 	regulator_desc_ldo(22, STEP_25_MV),
324 	regulator_desc_ldo(23, STEP_25_MV),
325 	regulator_desc_ldo(24, STEP_50_MV),
326 	regulator_desc_ldo(25, STEP_50_MV),
327 	regulator_desc_ldo(26, STEP_50_MV),
328 	regulator_desc_buck1_4(1),
329 	regulator_desc_buck1_4(2),
330 	regulator_desc_buck1_4(3),
331 	regulator_desc_buck1_4(4),
332 	regulator_desc_buck5,
333 	regulator_desc_buck6_10(6, MIN_600_MV, STEP_6_25_MV),
334 	regulator_desc_buck6_10(7, MIN_600_MV, STEP_6_25_MV),
335 	regulator_desc_buck6_10(8, MIN_800_MV, STEP_12_5_MV),
336 	regulator_desc_buck6_10(9, MIN_1500_MV, STEP_12_5_MV),
337 	regulator_desc_buck6_10(10, MIN_1000_MV, STEP_12_5_MV),
338 };
339 
340 static int s2mpa01_pmic_probe(struct platform_device *pdev)
341 {
342 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
343 	struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
344 	struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX] = { };
345 	struct device_node *reg_np = NULL;
346 	struct regulator_config config = { };
347 	struct s2mpa01_info *s2mpa01;
348 	int i;
349 
350 	s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL);
351 	if (!s2mpa01)
352 		return -ENOMEM;
353 
354 	for (i = 0; i < S2MPA01_REGULATOR_CNT; i++)
355 		rdata[i].name = regulators[i].name;
356 
357 	if (iodev->dev->of_node) {
358 		reg_np = of_get_child_by_name(iodev->dev->of_node,
359 							"regulators");
360 			if (!reg_np) {
361 				dev_err(&pdev->dev,
362 					"could not find regulators sub-node\n");
363 				return -EINVAL;
364 			}
365 
366 		of_regulator_match(&pdev->dev, reg_np, rdata,
367 						S2MPA01_REGULATOR_MAX);
368 		of_node_put(reg_np);
369 	}
370 
371 	platform_set_drvdata(pdev, s2mpa01);
372 
373 	config.dev = &pdev->dev;
374 	config.regmap = iodev->regmap_pmic;
375 	config.driver_data = s2mpa01;
376 
377 	for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) {
378 		struct regulator_dev *rdev;
379 		if (pdata)
380 			config.init_data = pdata->regulators[i].initdata;
381 		else
382 			config.init_data = rdata[i].init_data;
383 
384 		if (reg_np)
385 			config.of_node = rdata[i].of_node;
386 
387 		rdev = devm_regulator_register(&pdev->dev,
388 						&regulators[i], &config);
389 		if (IS_ERR(rdev)) {
390 			dev_err(&pdev->dev, "regulator init failed for %d\n",
391 				i);
392 			return PTR_ERR(rdev);
393 		}
394 	}
395 
396 	return 0;
397 }
398 
399 static const struct platform_device_id s2mpa01_pmic_id[] = {
400 	{ "s2mpa01-pmic", 0},
401 	{ },
402 };
403 MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id);
404 
405 static struct platform_driver s2mpa01_pmic_driver = {
406 	.driver = {
407 		.name = "s2mpa01-pmic",
408 	},
409 	.probe = s2mpa01_pmic_probe,
410 	.id_table = s2mpa01_pmic_id,
411 };
412 
413 module_platform_driver(s2mpa01_pmic_driver);
414 
415 /* Module information */
416 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
417 MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>");
418 MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver");
419 MODULE_LICENSE("GPL");
420