xref: /openbmc/linux/drivers/regulator/s2mpa01.c (revision 4f6cce39)
1 /*
2  * Copyright (c) 2013 Samsung Electronics Co., Ltd
3  *		http://www.samsung.com
4  *
5  *  This program is free software; you can redistribute  it and/or modify it
6  *  under  the terms of  the GNU General  Public License as published by the
7  *  Free Software Foundation;  either version 2 of the  License, or (at your
8  *  option) any later version.
9  *
10  */
11 
12 #include <linux/bug.h>
13 #include <linux/err.h>
14 #include <linux/gpio.h>
15 #include <linux/slab.h>
16 #include <linux/module.h>
17 #include <linux/of.h>
18 #include <linux/regmap.h>
19 #include <linux/platform_device.h>
20 #include <linux/regulator/driver.h>
21 #include <linux/regulator/machine.h>
22 #include <linux/regulator/of_regulator.h>
23 #include <linux/mfd/samsung/core.h>
24 #include <linux/mfd/samsung/s2mpa01.h>
25 
26 #define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators)
27 
28 struct s2mpa01_info {
29 	struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX];
30 	int ramp_delay24;
31 	int ramp_delay3;
32 	int ramp_delay5;
33 	int ramp_delay16;
34 	int ramp_delay7;
35 	int ramp_delay8910;
36 };
37 
38 static int get_ramp_delay(int ramp_delay)
39 {
40 	unsigned char cnt = 0;
41 
42 	ramp_delay /= 6250;
43 
44 	while (true) {
45 		ramp_delay = ramp_delay >> 1;
46 		if (ramp_delay == 0)
47 			break;
48 		cnt++;
49 	}
50 
51 	if (cnt > 3)
52 		cnt = 3;
53 
54 	return cnt;
55 }
56 
57 static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
58 				   unsigned int old_selector,
59 				   unsigned int new_selector)
60 {
61 	struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
62 	unsigned int ramp_delay = 0;
63 	int old_volt, new_volt;
64 
65 	switch (rdev_get_id(rdev)) {
66 	case S2MPA01_BUCK2:
67 	case S2MPA01_BUCK4:
68 		ramp_delay = s2mpa01->ramp_delay24;
69 		break;
70 	case S2MPA01_BUCK3:
71 		ramp_delay = s2mpa01->ramp_delay3;
72 		break;
73 	case S2MPA01_BUCK5:
74 		ramp_delay = s2mpa01->ramp_delay5;
75 		break;
76 	case S2MPA01_BUCK1:
77 	case S2MPA01_BUCK6:
78 		ramp_delay = s2mpa01->ramp_delay16;
79 		break;
80 	case S2MPA01_BUCK7:
81 		ramp_delay = s2mpa01->ramp_delay7;
82 		break;
83 	case S2MPA01_BUCK8:
84 	case S2MPA01_BUCK9:
85 	case S2MPA01_BUCK10:
86 		ramp_delay = s2mpa01->ramp_delay8910;
87 		break;
88 	}
89 
90 	if (ramp_delay == 0)
91 		ramp_delay = rdev->desc->ramp_delay;
92 
93 	old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
94 	new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
95 
96 	return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
97 }
98 
99 static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
100 {
101 	struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
102 	unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2;
103 	unsigned int ramp_enable = 1, enable_shift = 0;
104 	int ret;
105 
106 	switch (rdev_get_id(rdev)) {
107 	case S2MPA01_BUCK1:
108 		enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT;
109 		if (!ramp_delay) {
110 			ramp_enable = 0;
111 			break;
112 		}
113 
114 		if (ramp_delay > s2mpa01->ramp_delay16)
115 			s2mpa01->ramp_delay16 = ramp_delay;
116 		else
117 			ramp_delay = s2mpa01->ramp_delay16;
118 
119 		ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
120 		break;
121 	case S2MPA01_BUCK2:
122 		enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT;
123 		if (!ramp_delay) {
124 			ramp_enable = 0;
125 			break;
126 		}
127 
128 		if (ramp_delay > s2mpa01->ramp_delay24)
129 			s2mpa01->ramp_delay24 = ramp_delay;
130 		else
131 			ramp_delay = s2mpa01->ramp_delay24;
132 
133 		ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
134 		ramp_reg = S2MPA01_REG_RAMP1;
135 		break;
136 	case S2MPA01_BUCK3:
137 		enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT;
138 		if (!ramp_delay) {
139 			ramp_enable = 0;
140 			break;
141 		}
142 
143 		s2mpa01->ramp_delay3 = ramp_delay;
144 		ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT;
145 		ramp_reg = S2MPA01_REG_RAMP1;
146 		break;
147 	case S2MPA01_BUCK4:
148 		enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT;
149 		if (!ramp_delay) {
150 			ramp_enable = 0;
151 			break;
152 		}
153 
154 		if (ramp_delay > s2mpa01->ramp_delay24)
155 			s2mpa01->ramp_delay24 = ramp_delay;
156 		else
157 			ramp_delay = s2mpa01->ramp_delay24;
158 
159 		ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
160 		ramp_reg = S2MPA01_REG_RAMP1;
161 		break;
162 	case S2MPA01_BUCK5:
163 		s2mpa01->ramp_delay5 = ramp_delay;
164 		ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT;
165 		break;
166 	case S2MPA01_BUCK6:
167 		if (ramp_delay > s2mpa01->ramp_delay16)
168 			s2mpa01->ramp_delay16 = ramp_delay;
169 		else
170 			ramp_delay = s2mpa01->ramp_delay16;
171 
172 		ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
173 		break;
174 	case S2MPA01_BUCK7:
175 		s2mpa01->ramp_delay7 = ramp_delay;
176 		ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT;
177 		break;
178 	case S2MPA01_BUCK8:
179 	case S2MPA01_BUCK9:
180 	case S2MPA01_BUCK10:
181 		if (ramp_delay > s2mpa01->ramp_delay8910)
182 			s2mpa01->ramp_delay8910 = ramp_delay;
183 		else
184 			ramp_delay = s2mpa01->ramp_delay8910;
185 
186 		ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT;
187 		break;
188 	default:
189 		return 0;
190 	}
191 
192 	if (!ramp_enable)
193 		goto ramp_disable;
194 
195 	/* Ramp delay can be enabled/disabled only for buck[1234] */
196 	if (rdev_get_id(rdev) >= S2MPA01_BUCK1 &&
197 			rdev_get_id(rdev) <= S2MPA01_BUCK4) {
198 		ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
199 					 1 << enable_shift, 1 << enable_shift);
200 		if (ret) {
201 			dev_err(&rdev->dev, "failed to enable ramp rate\n");
202 			return ret;
203 		}
204 	}
205 
206 	ramp_val = get_ramp_delay(ramp_delay);
207 
208 	return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
209 				  ramp_val << ramp_shift);
210 
211 ramp_disable:
212 	return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
213 				  1 << enable_shift, 0);
214 }
215 
216 static struct regulator_ops s2mpa01_ldo_ops = {
217 	.list_voltage		= regulator_list_voltage_linear,
218 	.map_voltage		= regulator_map_voltage_linear,
219 	.is_enabled		= regulator_is_enabled_regmap,
220 	.enable			= regulator_enable_regmap,
221 	.disable		= regulator_disable_regmap,
222 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
223 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
224 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
225 };
226 
227 static struct regulator_ops s2mpa01_buck_ops = {
228 	.list_voltage		= regulator_list_voltage_linear,
229 	.map_voltage		= regulator_map_voltage_linear,
230 	.is_enabled		= regulator_is_enabled_regmap,
231 	.enable			= regulator_enable_regmap,
232 	.disable		= regulator_disable_regmap,
233 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
234 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
235 	.set_voltage_time_sel	= s2mpa01_regulator_set_voltage_time_sel,
236 	.set_ramp_delay		= s2mpa01_set_ramp_delay,
237 };
238 
239 #define regulator_desc_ldo(num, step) {			\
240 	.name		= "LDO"#num,			\
241 	.id		= S2MPA01_LDO##num,		\
242 	.ops		= &s2mpa01_ldo_ops,		\
243 	.type		= REGULATOR_VOLTAGE,		\
244 	.owner		= THIS_MODULE,			\
245 	.min_uV		= MIN_800_MV,			\
246 	.uV_step	= step,				\
247 	.n_voltages	= S2MPA01_LDO_N_VOLTAGES,	\
248 	.vsel_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
249 	.vsel_mask	= S2MPA01_LDO_VSEL_MASK,	\
250 	.enable_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
251 	.enable_mask	= S2MPA01_ENABLE_MASK		\
252 }
253 
254 #define regulator_desc_buck1_4(num)	{			\
255 	.name		= "BUCK"#num,				\
256 	.id		= S2MPA01_BUCK##num,			\
257 	.ops		= &s2mpa01_buck_ops,			\
258 	.type		= REGULATOR_VOLTAGE,			\
259 	.owner		= THIS_MODULE,				\
260 	.min_uV		= MIN_600_MV,				\
261 	.uV_step	= STEP_6_25_MV,				\
262 	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
263 	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
264 	.vsel_reg	= S2MPA01_REG_B1CTRL2 + (num - 1) * 2,	\
265 	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
266 	.enable_reg	= S2MPA01_REG_B1CTRL1 + (num - 1) * 2,	\
267 	.enable_mask	= S2MPA01_ENABLE_MASK			\
268 }
269 
270 #define regulator_desc_buck5	{				\
271 	.name		= "BUCK5",				\
272 	.id		= S2MPA01_BUCK5,			\
273 	.ops		= &s2mpa01_buck_ops,			\
274 	.type		= REGULATOR_VOLTAGE,			\
275 	.owner		= THIS_MODULE,				\
276 	.min_uV		= MIN_800_MV,				\
277 	.uV_step	= STEP_6_25_MV,				\
278 	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
279 	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
280 	.vsel_reg	= S2MPA01_REG_B5CTRL2,			\
281 	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
282 	.enable_reg	= S2MPA01_REG_B5CTRL1,			\
283 	.enable_mask	= S2MPA01_ENABLE_MASK			\
284 }
285 
286 #define regulator_desc_buck6_10(num, min, step) {			\
287 	.name		= "BUCK"#num,				\
288 	.id		= S2MPA01_BUCK##num,			\
289 	.ops		= &s2mpa01_buck_ops,			\
290 	.type		= REGULATOR_VOLTAGE,			\
291 	.owner		= THIS_MODULE,				\
292 	.min_uV		= min,					\
293 	.uV_step	= step,					\
294 	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
295 	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
296 	.vsel_reg	= S2MPA01_REG_B6CTRL2 + (num - 6) * 2,	\
297 	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
298 	.enable_reg	= S2MPA01_REG_B6CTRL1 + (num - 6) * 2,	\
299 	.enable_mask	= S2MPA01_ENABLE_MASK			\
300 }
301 
302 static const struct regulator_desc regulators[] = {
303 	regulator_desc_ldo(1, STEP_25_MV),
304 	regulator_desc_ldo(2, STEP_50_MV),
305 	regulator_desc_ldo(3, STEP_50_MV),
306 	regulator_desc_ldo(4, STEP_50_MV),
307 	regulator_desc_ldo(5, STEP_50_MV),
308 	regulator_desc_ldo(6, STEP_25_MV),
309 	regulator_desc_ldo(7, STEP_50_MV),
310 	regulator_desc_ldo(8, STEP_50_MV),
311 	regulator_desc_ldo(9, STEP_50_MV),
312 	regulator_desc_ldo(10, STEP_50_MV),
313 	regulator_desc_ldo(11, STEP_25_MV),
314 	regulator_desc_ldo(12, STEP_50_MV),
315 	regulator_desc_ldo(13, STEP_50_MV),
316 	regulator_desc_ldo(14, STEP_50_MV),
317 	regulator_desc_ldo(15, STEP_50_MV),
318 	regulator_desc_ldo(16, STEP_50_MV),
319 	regulator_desc_ldo(17, STEP_50_MV),
320 	regulator_desc_ldo(18, STEP_50_MV),
321 	regulator_desc_ldo(19, STEP_50_MV),
322 	regulator_desc_ldo(20, STEP_50_MV),
323 	regulator_desc_ldo(21, STEP_50_MV),
324 	regulator_desc_ldo(22, STEP_25_MV),
325 	regulator_desc_ldo(23, STEP_25_MV),
326 	regulator_desc_ldo(24, STEP_50_MV),
327 	regulator_desc_ldo(25, STEP_50_MV),
328 	regulator_desc_ldo(26, STEP_50_MV),
329 	regulator_desc_buck1_4(1),
330 	regulator_desc_buck1_4(2),
331 	regulator_desc_buck1_4(3),
332 	regulator_desc_buck1_4(4),
333 	regulator_desc_buck5,
334 	regulator_desc_buck6_10(6, MIN_600_MV, STEP_6_25_MV),
335 	regulator_desc_buck6_10(7, MIN_600_MV, STEP_6_25_MV),
336 	regulator_desc_buck6_10(8, MIN_800_MV, STEP_12_5_MV),
337 	regulator_desc_buck6_10(9, MIN_1500_MV, STEP_12_5_MV),
338 	regulator_desc_buck6_10(10, MIN_1000_MV, STEP_12_5_MV),
339 };
340 
341 static int s2mpa01_pmic_probe(struct platform_device *pdev)
342 {
343 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
344 	struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
345 	struct device_node *reg_np = NULL;
346 	struct regulator_config config = { };
347 	struct of_regulator_match *rdata;
348 	struct s2mpa01_info *s2mpa01;
349 	int i;
350 
351 	s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL);
352 	if (!s2mpa01)
353 		return -ENOMEM;
354 
355 	rdata = s2mpa01->rdata;
356 	for (i = 0; i < S2MPA01_REGULATOR_CNT; i++)
357 		rdata[i].name = regulators[i].name;
358 
359 	if (iodev->dev->of_node) {
360 		reg_np = of_get_child_by_name(iodev->dev->of_node,
361 							"regulators");
362 			if (!reg_np) {
363 				dev_err(&pdev->dev,
364 					"could not find regulators sub-node\n");
365 				return -EINVAL;
366 			}
367 
368 		of_regulator_match(&pdev->dev, reg_np, rdata,
369 						S2MPA01_REGULATOR_MAX);
370 		of_node_put(reg_np);
371 	}
372 
373 	platform_set_drvdata(pdev, s2mpa01);
374 
375 	config.dev = &pdev->dev;
376 	config.regmap = iodev->regmap_pmic;
377 	config.driver_data = s2mpa01;
378 
379 	for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) {
380 		struct regulator_dev *rdev;
381 		if (pdata)
382 			config.init_data = pdata->regulators[i].initdata;
383 		else
384 			config.init_data = rdata[i].init_data;
385 
386 		if (reg_np)
387 			config.of_node = rdata[i].of_node;
388 
389 		rdev = devm_regulator_register(&pdev->dev,
390 						&regulators[i], &config);
391 		if (IS_ERR(rdev)) {
392 			dev_err(&pdev->dev, "regulator init failed for %d\n",
393 				i);
394 			return PTR_ERR(rdev);
395 		}
396 	}
397 
398 	return 0;
399 }
400 
401 static const struct platform_device_id s2mpa01_pmic_id[] = {
402 	{ "s2mpa01-pmic", 0},
403 	{ },
404 };
405 MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id);
406 
407 static struct platform_driver s2mpa01_pmic_driver = {
408 	.driver = {
409 		.name = "s2mpa01-pmic",
410 	},
411 	.probe = s2mpa01_pmic_probe,
412 	.id_table = s2mpa01_pmic_id,
413 };
414 
415 module_platform_driver(s2mpa01_pmic_driver);
416 
417 /* Module information */
418 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
419 MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>");
420 MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver");
421 MODULE_LICENSE("GPL");
422