1 // SPDX-License-Identifier: GPL-2.0 2 // Copyright (c) 2018, The Linux Foundation. All rights reserved. 3 4 #define pr_fmt(fmt) "%s: " fmt, __func__ 5 6 #include <linux/err.h> 7 #include <linux/kernel.h> 8 #include <linux/module.h> 9 #include <linux/of.h> 10 #include <linux/of_device.h> 11 #include <linux/platform_device.h> 12 #include <linux/slab.h> 13 #include <linux/string.h> 14 #include <linux/regulator/driver.h> 15 #include <linux/regulator/machine.h> 16 #include <linux/regulator/of_regulator.h> 17 18 #include <soc/qcom/cmd-db.h> 19 #include <soc/qcom/rpmh.h> 20 21 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 22 23 /** 24 * enum rpmh_regulator_type - supported RPMh accelerator types 25 * %VRM: RPMh VRM accelerator which supports voting on enable, voltage, 26 * and mode of LDO, SMPS, and BOB type PMIC regulators. 27 * %XOB: RPMh XOB accelerator which supports voting on the enable state 28 * of PMIC regulators. 29 */ 30 enum rpmh_regulator_type { 31 VRM, 32 XOB, 33 }; 34 35 #define RPMH_REGULATOR_REG_VRM_VOLTAGE 0x0 36 #define RPMH_REGULATOR_REG_ENABLE 0x4 37 #define RPMH_REGULATOR_REG_VRM_MODE 0x8 38 39 #define PMIC4_LDO_MODE_RETENTION 4 40 #define PMIC4_LDO_MODE_LPM 5 41 #define PMIC4_LDO_MODE_HPM 7 42 43 #define PMIC4_SMPS_MODE_RETENTION 4 44 #define PMIC4_SMPS_MODE_PFM 5 45 #define PMIC4_SMPS_MODE_AUTO 6 46 #define PMIC4_SMPS_MODE_PWM 7 47 48 #define PMIC4_BOB_MODE_PASS 0 49 #define PMIC4_BOB_MODE_PFM 1 50 #define PMIC4_BOB_MODE_AUTO 2 51 #define PMIC4_BOB_MODE_PWM 3 52 53 /** 54 * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations 55 * @regulator_type: RPMh accelerator type used to manage this 56 * regulator 57 * @ops: Pointer to regulator ops callback structure 58 * @voltage_range: The single range of voltages supported by this 59 * PMIC regulator type 60 * @n_voltages: The number of unique voltage set points defined 61 * by voltage_range 62 * @hpm_min_load_uA: Minimum load current in microamps that requires 63 * high power mode (HPM) operation. This is used 64 * for LDO hardware type regulators only. 65 * @pmic_mode_map: Array indexed by regulator framework mode 66 * containing PMIC hardware modes. Must be large 67 * enough to index all framework modes supported 68 * by this regulator hardware type. 69 * @of_map_mode: Maps an RPMH_REGULATOR_MODE_* mode value defined 70 * in device tree to a regulator framework mode 71 */ 72 struct rpmh_vreg_hw_data { 73 enum rpmh_regulator_type regulator_type; 74 const struct regulator_ops *ops; 75 const struct regulator_linear_range voltage_range; 76 int n_voltages; 77 int hpm_min_load_uA; 78 const int *pmic_mode_map; 79 unsigned int (*of_map_mode)(unsigned int mode); 80 }; 81 82 /** 83 * struct rpmh_vreg - individual RPMh regulator data structure encapsulating a 84 * single regulator device 85 * @dev: Device pointer for the top-level PMIC RPMh 86 * regulator parent device. This is used as a 87 * handle in RPMh write requests. 88 * @addr: Base address of the regulator resource within 89 * an RPMh accelerator 90 * @rdesc: Regulator descriptor 91 * @hw_data: PMIC regulator configuration data for this RPMh 92 * regulator 93 * @always_wait_for_ack: Boolean flag indicating if a request must always 94 * wait for an ACK from RPMh before continuing even 95 * if it corresponds to a strictly lower power 96 * state (e.g. enabled --> disabled). 97 * @enabled: Flag indicating if the regulator is enabled or 98 * not 99 * @bypassed: Boolean indicating if the regulator is in 100 * bypass (pass-through) mode or not. This is 101 * only used by BOB rpmh-regulator resources. 102 * @voltage_selector: Selector used for get_voltage_sel() and 103 * set_voltage_sel() callbacks 104 * @mode: RPMh VRM regulator current framework mode 105 */ 106 struct rpmh_vreg { 107 struct device *dev; 108 u32 addr; 109 struct regulator_desc rdesc; 110 const struct rpmh_vreg_hw_data *hw_data; 111 bool always_wait_for_ack; 112 113 int enabled; 114 bool bypassed; 115 int voltage_selector; 116 unsigned int mode; 117 }; 118 119 /** 120 * struct rpmh_vreg_init_data - initialization data for an RPMh regulator 121 * @name: Name for the regulator which also corresponds 122 * to the device tree subnode name of the regulator 123 * @resource_name: RPMh regulator resource name format string. 124 * This must include exactly one field: '%s' which 125 * is filled at run-time with the PMIC ID provided 126 * by device tree property qcom,pmic-id. Example: 127 * "ldo%s1" for RPMh resource "ldoa1". 128 * @supply_name: Parent supply regulator name 129 * @hw_data: Configuration data for this PMIC regulator type 130 */ 131 struct rpmh_vreg_init_data { 132 const char *name; 133 const char *resource_name; 134 const char *supply_name; 135 const struct rpmh_vreg_hw_data *hw_data; 136 }; 137 138 /** 139 * rpmh_regulator_send_request() - send the request to RPMh 140 * @vreg: Pointer to the RPMh regulator 141 * @cmd: Pointer to the RPMh command to send 142 * @wait_for_ack: Boolean indicating if execution must wait until the 143 * request has been acknowledged as complete 144 * 145 * Return: 0 on success, errno on failure 146 */ 147 static int rpmh_regulator_send_request(struct rpmh_vreg *vreg, 148 struct tcs_cmd *cmd, bool wait_for_ack) 149 { 150 int ret; 151 152 if (wait_for_ack || vreg->always_wait_for_ack) 153 ret = rpmh_write(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd, 1); 154 else 155 ret = rpmh_write_async(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd, 156 1); 157 158 return ret; 159 } 160 161 static int _rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev, 162 unsigned int selector, bool wait_for_ack) 163 { 164 struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); 165 struct tcs_cmd cmd = { 166 .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_VOLTAGE, 167 }; 168 int ret; 169 170 /* VRM voltage control register is set with voltage in millivolts. */ 171 cmd.data = DIV_ROUND_UP(regulator_list_voltage_linear_range(rdev, 172 selector), 1000); 173 174 ret = rpmh_regulator_send_request(vreg, &cmd, wait_for_ack); 175 if (!ret) 176 vreg->voltage_selector = selector; 177 178 return ret; 179 } 180 181 static int rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev, 182 unsigned int selector) 183 { 184 struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); 185 186 if (vreg->enabled == -EINVAL) { 187 /* 188 * Cache the voltage and send it later when the regulator is 189 * enabled or disabled. 190 */ 191 vreg->voltage_selector = selector; 192 return 0; 193 } 194 195 return _rpmh_regulator_vrm_set_voltage_sel(rdev, selector, 196 selector > vreg->voltage_selector); 197 } 198 199 static int rpmh_regulator_vrm_get_voltage_sel(struct regulator_dev *rdev) 200 { 201 struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); 202 203 return vreg->voltage_selector; 204 } 205 206 static int rpmh_regulator_is_enabled(struct regulator_dev *rdev) 207 { 208 struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); 209 210 return vreg->enabled; 211 } 212 213 static int rpmh_regulator_set_enable_state(struct regulator_dev *rdev, 214 bool enable) 215 { 216 struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); 217 struct tcs_cmd cmd = { 218 .addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE, 219 .data = enable, 220 }; 221 int ret; 222 223 if (vreg->enabled == -EINVAL && 224 vreg->voltage_selector != -ENOTRECOVERABLE) { 225 ret = _rpmh_regulator_vrm_set_voltage_sel(rdev, 226 vreg->voltage_selector, true); 227 if (ret < 0) 228 return ret; 229 } 230 231 ret = rpmh_regulator_send_request(vreg, &cmd, enable); 232 if (!ret) 233 vreg->enabled = enable; 234 235 return ret; 236 } 237 238 static int rpmh_regulator_enable(struct regulator_dev *rdev) 239 { 240 return rpmh_regulator_set_enable_state(rdev, true); 241 } 242 243 static int rpmh_regulator_disable(struct regulator_dev *rdev) 244 { 245 return rpmh_regulator_set_enable_state(rdev, false); 246 } 247 248 static int rpmh_regulator_vrm_set_mode_bypass(struct rpmh_vreg *vreg, 249 unsigned int mode, bool bypassed) 250 { 251 struct tcs_cmd cmd = { 252 .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_MODE, 253 }; 254 int pmic_mode; 255 256 if (mode > REGULATOR_MODE_STANDBY) 257 return -EINVAL; 258 259 pmic_mode = vreg->hw_data->pmic_mode_map[mode]; 260 if (pmic_mode < 0) 261 return pmic_mode; 262 263 if (bypassed) 264 cmd.data = PMIC4_BOB_MODE_PASS; 265 else 266 cmd.data = pmic_mode; 267 268 return rpmh_regulator_send_request(vreg, &cmd, true); 269 } 270 271 static int rpmh_regulator_vrm_set_mode(struct regulator_dev *rdev, 272 unsigned int mode) 273 { 274 struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); 275 int ret; 276 277 if (mode == vreg->mode) 278 return 0; 279 280 ret = rpmh_regulator_vrm_set_mode_bypass(vreg, mode, vreg->bypassed); 281 if (!ret) 282 vreg->mode = mode; 283 284 return ret; 285 } 286 287 static unsigned int rpmh_regulator_vrm_get_mode(struct regulator_dev *rdev) 288 { 289 struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); 290 291 return vreg->mode; 292 } 293 294 /** 295 * rpmh_regulator_vrm_set_load() - set the regulator mode based upon the load 296 * current requested 297 * @rdev: Regulator device pointer for the rpmh-regulator 298 * @load_uA: Aggregated load current in microamps 299 * 300 * This function is used in the regulator_ops for VRM type RPMh regulator 301 * devices. 302 * 303 * Return: 0 on success, errno on failure 304 */ 305 static int rpmh_regulator_vrm_set_load(struct regulator_dev *rdev, int load_uA) 306 { 307 struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); 308 unsigned int mode; 309 310 if (load_uA >= vreg->hw_data->hpm_min_load_uA) 311 mode = REGULATOR_MODE_NORMAL; 312 else 313 mode = REGULATOR_MODE_IDLE; 314 315 return rpmh_regulator_vrm_set_mode(rdev, mode); 316 } 317 318 static int rpmh_regulator_vrm_set_bypass(struct regulator_dev *rdev, 319 bool enable) 320 { 321 struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); 322 int ret; 323 324 if (vreg->bypassed == enable) 325 return 0; 326 327 ret = rpmh_regulator_vrm_set_mode_bypass(vreg, vreg->mode, enable); 328 if (!ret) 329 vreg->bypassed = enable; 330 331 return ret; 332 } 333 334 static int rpmh_regulator_vrm_get_bypass(struct regulator_dev *rdev, 335 bool *enable) 336 { 337 struct rpmh_vreg *vreg = rdev_get_drvdata(rdev); 338 339 *enable = vreg->bypassed; 340 341 return 0; 342 } 343 344 static const struct regulator_ops rpmh_regulator_vrm_ops = { 345 .enable = rpmh_regulator_enable, 346 .disable = rpmh_regulator_disable, 347 .is_enabled = rpmh_regulator_is_enabled, 348 .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel, 349 .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel, 350 .list_voltage = regulator_list_voltage_linear_range, 351 .set_mode = rpmh_regulator_vrm_set_mode, 352 .get_mode = rpmh_regulator_vrm_get_mode, 353 }; 354 355 static const struct regulator_ops rpmh_regulator_vrm_drms_ops = { 356 .enable = rpmh_regulator_enable, 357 .disable = rpmh_regulator_disable, 358 .is_enabled = rpmh_regulator_is_enabled, 359 .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel, 360 .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel, 361 .list_voltage = regulator_list_voltage_linear_range, 362 .set_mode = rpmh_regulator_vrm_set_mode, 363 .get_mode = rpmh_regulator_vrm_get_mode, 364 .set_load = rpmh_regulator_vrm_set_load, 365 }; 366 367 static const struct regulator_ops rpmh_regulator_vrm_bypass_ops = { 368 .enable = rpmh_regulator_enable, 369 .disable = rpmh_regulator_disable, 370 .is_enabled = rpmh_regulator_is_enabled, 371 .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel, 372 .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel, 373 .list_voltage = regulator_list_voltage_linear_range, 374 .set_mode = rpmh_regulator_vrm_set_mode, 375 .get_mode = rpmh_regulator_vrm_get_mode, 376 .set_bypass = rpmh_regulator_vrm_set_bypass, 377 .get_bypass = rpmh_regulator_vrm_get_bypass, 378 }; 379 380 static const struct regulator_ops rpmh_regulator_xob_ops = { 381 .enable = rpmh_regulator_enable, 382 .disable = rpmh_regulator_disable, 383 .is_enabled = rpmh_regulator_is_enabled, 384 }; 385 386 /** 387 * rpmh_regulator_init_vreg() - initialize all attributes of an rpmh-regulator 388 * vreg: Pointer to the individual rpmh-regulator resource 389 * dev: Pointer to the top level rpmh-regulator PMIC device 390 * node: Pointer to the individual rpmh-regulator resource 391 * device node 392 * pmic_id: String used to identify the top level rpmh-regulator 393 * PMIC device on the board 394 * pmic_rpmh_data: Pointer to a null-terminated array of rpmh-regulator 395 * resources defined for the top level PMIC device 396 * 397 * Return: 0 on success, errno on failure 398 */ 399 static int rpmh_regulator_init_vreg(struct rpmh_vreg *vreg, struct device *dev, 400 struct device_node *node, const char *pmic_id, 401 const struct rpmh_vreg_init_data *pmic_rpmh_data) 402 { 403 struct regulator_config reg_config = {}; 404 char rpmh_resource_name[20] = ""; 405 const struct rpmh_vreg_init_data *rpmh_data; 406 struct regulator_init_data *init_data; 407 struct regulator_dev *rdev; 408 int ret; 409 410 vreg->dev = dev; 411 412 for (rpmh_data = pmic_rpmh_data; rpmh_data->name; rpmh_data++) 413 if (of_node_name_eq(node, rpmh_data->name)) 414 break; 415 416 if (!rpmh_data->name) { 417 dev_err(dev, "Unknown regulator %pOFn\n", node); 418 return -EINVAL; 419 } 420 421 scnprintf(rpmh_resource_name, sizeof(rpmh_resource_name), 422 rpmh_data->resource_name, pmic_id); 423 424 vreg->addr = cmd_db_read_addr(rpmh_resource_name); 425 if (!vreg->addr) { 426 dev_err(dev, "%pOFn: could not find RPMh address for resource %s\n", 427 node, rpmh_resource_name); 428 return -ENODEV; 429 } 430 431 vreg->rdesc.name = rpmh_data->name; 432 vreg->rdesc.supply_name = rpmh_data->supply_name; 433 vreg->hw_data = rpmh_data->hw_data; 434 435 vreg->enabled = -EINVAL; 436 vreg->voltage_selector = -ENOTRECOVERABLE; 437 vreg->mode = REGULATOR_MODE_INVALID; 438 439 if (rpmh_data->hw_data->n_voltages) { 440 vreg->rdesc.linear_ranges = &rpmh_data->hw_data->voltage_range; 441 vreg->rdesc.n_linear_ranges = 1; 442 vreg->rdesc.n_voltages = rpmh_data->hw_data->n_voltages; 443 } 444 445 vreg->always_wait_for_ack = of_property_read_bool(node, 446 "qcom,always-wait-for-ack"); 447 448 vreg->rdesc.owner = THIS_MODULE; 449 vreg->rdesc.type = REGULATOR_VOLTAGE; 450 vreg->rdesc.ops = vreg->hw_data->ops; 451 vreg->rdesc.of_map_mode = vreg->hw_data->of_map_mode; 452 453 init_data = of_get_regulator_init_data(dev, node, &vreg->rdesc); 454 if (!init_data) 455 return -ENOMEM; 456 457 if (rpmh_data->hw_data->regulator_type == XOB && 458 init_data->constraints.min_uV && 459 init_data->constraints.min_uV == init_data->constraints.max_uV) { 460 vreg->rdesc.fixed_uV = init_data->constraints.min_uV; 461 vreg->rdesc.n_voltages = 1; 462 } 463 464 reg_config.dev = dev; 465 reg_config.init_data = init_data; 466 reg_config.of_node = node; 467 reg_config.driver_data = vreg; 468 469 rdev = devm_regulator_register(dev, &vreg->rdesc, ®_config); 470 if (IS_ERR(rdev)) { 471 ret = PTR_ERR(rdev); 472 dev_err(dev, "%pOFn: devm_regulator_register() failed, ret=%d\n", 473 node, ret); 474 return ret; 475 } 476 477 dev_dbg(dev, "%pOFn regulator registered for RPMh resource %s @ 0x%05X\n", 478 node, rpmh_resource_name, vreg->addr); 479 480 return 0; 481 } 482 483 static const int pmic_mode_map_pmic4_ldo[REGULATOR_MODE_STANDBY + 1] = { 484 [REGULATOR_MODE_INVALID] = -EINVAL, 485 [REGULATOR_MODE_STANDBY] = PMIC4_LDO_MODE_RETENTION, 486 [REGULATOR_MODE_IDLE] = PMIC4_LDO_MODE_LPM, 487 [REGULATOR_MODE_NORMAL] = PMIC4_LDO_MODE_HPM, 488 [REGULATOR_MODE_FAST] = -EINVAL, 489 }; 490 491 static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int rpmh_mode) 492 { 493 unsigned int mode; 494 495 switch (rpmh_mode) { 496 case RPMH_REGULATOR_MODE_HPM: 497 mode = REGULATOR_MODE_NORMAL; 498 break; 499 case RPMH_REGULATOR_MODE_LPM: 500 mode = REGULATOR_MODE_IDLE; 501 break; 502 case RPMH_REGULATOR_MODE_RET: 503 mode = REGULATOR_MODE_STANDBY; 504 break; 505 default: 506 mode = REGULATOR_MODE_INVALID; 507 break; 508 } 509 510 return mode; 511 } 512 513 static const int pmic_mode_map_pmic4_smps[REGULATOR_MODE_STANDBY + 1] = { 514 [REGULATOR_MODE_INVALID] = -EINVAL, 515 [REGULATOR_MODE_STANDBY] = PMIC4_SMPS_MODE_RETENTION, 516 [REGULATOR_MODE_IDLE] = PMIC4_SMPS_MODE_PFM, 517 [REGULATOR_MODE_NORMAL] = PMIC4_SMPS_MODE_AUTO, 518 [REGULATOR_MODE_FAST] = PMIC4_SMPS_MODE_PWM, 519 }; 520 521 static unsigned int 522 rpmh_regulator_pmic4_smps_of_map_mode(unsigned int rpmh_mode) 523 { 524 unsigned int mode; 525 526 switch (rpmh_mode) { 527 case RPMH_REGULATOR_MODE_HPM: 528 mode = REGULATOR_MODE_FAST; 529 break; 530 case RPMH_REGULATOR_MODE_AUTO: 531 mode = REGULATOR_MODE_NORMAL; 532 break; 533 case RPMH_REGULATOR_MODE_LPM: 534 mode = REGULATOR_MODE_IDLE; 535 break; 536 case RPMH_REGULATOR_MODE_RET: 537 mode = REGULATOR_MODE_STANDBY; 538 break; 539 default: 540 mode = REGULATOR_MODE_INVALID; 541 break; 542 } 543 544 return mode; 545 } 546 547 static const int pmic_mode_map_pmic4_bob[REGULATOR_MODE_STANDBY + 1] = { 548 [REGULATOR_MODE_INVALID] = -EINVAL, 549 [REGULATOR_MODE_STANDBY] = -EINVAL, 550 [REGULATOR_MODE_IDLE] = PMIC4_BOB_MODE_PFM, 551 [REGULATOR_MODE_NORMAL] = PMIC4_BOB_MODE_AUTO, 552 [REGULATOR_MODE_FAST] = PMIC4_BOB_MODE_PWM, 553 }; 554 555 static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode) 556 { 557 unsigned int mode; 558 559 switch (rpmh_mode) { 560 case RPMH_REGULATOR_MODE_HPM: 561 mode = REGULATOR_MODE_FAST; 562 break; 563 case RPMH_REGULATOR_MODE_AUTO: 564 mode = REGULATOR_MODE_NORMAL; 565 break; 566 case RPMH_REGULATOR_MODE_LPM: 567 mode = REGULATOR_MODE_IDLE; 568 break; 569 default: 570 mode = REGULATOR_MODE_INVALID; 571 break; 572 } 573 574 return mode; 575 } 576 577 static const struct rpmh_vreg_hw_data pmic4_pldo = { 578 .regulator_type = VRM, 579 .ops = &rpmh_regulator_vrm_drms_ops, 580 .voltage_range = REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000), 581 .n_voltages = 256, 582 .hpm_min_load_uA = 10000, 583 .pmic_mode_map = pmic_mode_map_pmic4_ldo, 584 .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode, 585 }; 586 587 static const struct rpmh_vreg_hw_data pmic4_pldo_lv = { 588 .regulator_type = VRM, 589 .ops = &rpmh_regulator_vrm_drms_ops, 590 .voltage_range = REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000), 591 .n_voltages = 128, 592 .hpm_min_load_uA = 10000, 593 .pmic_mode_map = pmic_mode_map_pmic4_ldo, 594 .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode, 595 }; 596 597 static const struct rpmh_vreg_hw_data pmic4_nldo = { 598 .regulator_type = VRM, 599 .ops = &rpmh_regulator_vrm_drms_ops, 600 .voltage_range = REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000), 601 .n_voltages = 128, 602 .hpm_min_load_uA = 30000, 603 .pmic_mode_map = pmic_mode_map_pmic4_ldo, 604 .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode, 605 }; 606 607 static const struct rpmh_vreg_hw_data pmic4_hfsmps3 = { 608 .regulator_type = VRM, 609 .ops = &rpmh_regulator_vrm_ops, 610 .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000), 611 .n_voltages = 216, 612 .pmic_mode_map = pmic_mode_map_pmic4_smps, 613 .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, 614 }; 615 616 static const struct rpmh_vreg_hw_data pmic4_ftsmps426 = { 617 .regulator_type = VRM, 618 .ops = &rpmh_regulator_vrm_ops, 619 .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000), 620 .n_voltages = 259, 621 .pmic_mode_map = pmic_mode_map_pmic4_smps, 622 .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, 623 }; 624 625 static const struct rpmh_vreg_hw_data pmic4_bob = { 626 .regulator_type = VRM, 627 .ops = &rpmh_regulator_vrm_bypass_ops, 628 .voltage_range = REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000), 629 .n_voltages = 84, 630 .pmic_mode_map = pmic_mode_map_pmic4_bob, 631 .of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode, 632 }; 633 634 static const struct rpmh_vreg_hw_data pmic4_lvs = { 635 .regulator_type = XOB, 636 .ops = &rpmh_regulator_xob_ops, 637 /* LVS hardware does not support voltage or mode configuration. */ 638 }; 639 640 #define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \ 641 { \ 642 .name = _name, \ 643 .resource_name = _resource_name, \ 644 .hw_data = _hw_data, \ 645 .supply_name = _supply_name, \ 646 } 647 648 static const struct rpmh_vreg_init_data pm8998_vreg_data[] = { 649 RPMH_VREG("smps1", "smp%s1", &pmic4_ftsmps426, "vdd-s1"), 650 RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd-s2"), 651 RPMH_VREG("smps3", "smp%s3", &pmic4_hfsmps3, "vdd-s3"), 652 RPMH_VREG("smps4", "smp%s4", &pmic4_hfsmps3, "vdd-s4"), 653 RPMH_VREG("smps5", "smp%s5", &pmic4_hfsmps3, "vdd-s5"), 654 RPMH_VREG("smps6", "smp%s6", &pmic4_ftsmps426, "vdd-s6"), 655 RPMH_VREG("smps7", "smp%s7", &pmic4_ftsmps426, "vdd-s7"), 656 RPMH_VREG("smps8", "smp%s8", &pmic4_ftsmps426, "vdd-s8"), 657 RPMH_VREG("smps9", "smp%s9", &pmic4_ftsmps426, "vdd-s9"), 658 RPMH_VREG("smps10", "smp%s10", &pmic4_ftsmps426, "vdd-s10"), 659 RPMH_VREG("smps11", "smp%s11", &pmic4_ftsmps426, "vdd-s11"), 660 RPMH_VREG("smps12", "smp%s12", &pmic4_ftsmps426, "vdd-s12"), 661 RPMH_VREG("smps13", "smp%s13", &pmic4_ftsmps426, "vdd-s13"), 662 RPMH_VREG("ldo1", "ldo%s1", &pmic4_nldo, "vdd-l1-l27"), 663 RPMH_VREG("ldo2", "ldo%s2", &pmic4_nldo, "vdd-l2-l8-l17"), 664 RPMH_VREG("ldo3", "ldo%s3", &pmic4_nldo, "vdd-l3-l11"), 665 RPMH_VREG("ldo4", "ldo%s4", &pmic4_nldo, "vdd-l4-l5"), 666 RPMH_VREG("ldo5", "ldo%s5", &pmic4_nldo, "vdd-l4-l5"), 667 RPMH_VREG("ldo6", "ldo%s6", &pmic4_pldo, "vdd-l6"), 668 RPMH_VREG("ldo7", "ldo%s7", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"), 669 RPMH_VREG("ldo8", "ldo%s8", &pmic4_nldo, "vdd-l2-l8-l17"), 670 RPMH_VREG("ldo9", "ldo%s9", &pmic4_pldo, "vdd-l9"), 671 RPMH_VREG("ldo10", "ldo%s10", &pmic4_pldo, "vdd-l10-l23-l25"), 672 RPMH_VREG("ldo11", "ldo%s11", &pmic4_nldo, "vdd-l3-l11"), 673 RPMH_VREG("ldo12", "ldo%s12", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"), 674 RPMH_VREG("ldo13", "ldo%s13", &pmic4_pldo, "vdd-l13-l19-l21"), 675 RPMH_VREG("ldo14", "ldo%s14", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"), 676 RPMH_VREG("ldo15", "ldo%s15", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"), 677 RPMH_VREG("ldo16", "ldo%s16", &pmic4_pldo, "vdd-l16-l28"), 678 RPMH_VREG("ldo17", "ldo%s17", &pmic4_nldo, "vdd-l2-l8-l17"), 679 RPMH_VREG("ldo18", "ldo%s18", &pmic4_pldo, "vdd-l18-l22"), 680 RPMH_VREG("ldo19", "ldo%s19", &pmic4_pldo, "vdd-l13-l19-l21"), 681 RPMH_VREG("ldo20", "ldo%s20", &pmic4_pldo, "vdd-l20-l24"), 682 RPMH_VREG("ldo21", "ldo%s21", &pmic4_pldo, "vdd-l13-l19-l21"), 683 RPMH_VREG("ldo22", "ldo%s22", &pmic4_pldo, "vdd-l18-l22"), 684 RPMH_VREG("ldo23", "ldo%s23", &pmic4_pldo, "vdd-l10-l23-l25"), 685 RPMH_VREG("ldo24", "ldo%s24", &pmic4_pldo, "vdd-l20-l24"), 686 RPMH_VREG("ldo25", "ldo%s25", &pmic4_pldo, "vdd-l10-l23-l25"), 687 RPMH_VREG("ldo26", "ldo%s26", &pmic4_nldo, "vdd-l26"), 688 RPMH_VREG("ldo27", "ldo%s27", &pmic4_nldo, "vdd-l1-l27"), 689 RPMH_VREG("ldo28", "ldo%s28", &pmic4_pldo, "vdd-l16-l28"), 690 RPMH_VREG("lvs1", "vs%s1", &pmic4_lvs, "vin-lvs-1-2"), 691 RPMH_VREG("lvs2", "vs%s2", &pmic4_lvs, "vin-lvs-1-2"), 692 {}, 693 }; 694 695 static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = { 696 RPMH_VREG("bob", "bob%s1", &pmic4_bob, "vdd-bob"), 697 {}, 698 }; 699 700 static const struct rpmh_vreg_init_data pm8005_vreg_data[] = { 701 RPMH_VREG("smps1", "smp%s1", &pmic4_ftsmps426, "vdd-s1"), 702 RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd-s2"), 703 RPMH_VREG("smps3", "smp%s3", &pmic4_ftsmps426, "vdd-s3"), 704 RPMH_VREG("smps4", "smp%s4", &pmic4_ftsmps426, "vdd-s4"), 705 {}, 706 }; 707 708 static int rpmh_regulator_probe(struct platform_device *pdev) 709 { 710 struct device *dev = &pdev->dev; 711 const struct rpmh_vreg_init_data *vreg_data; 712 struct device_node *node; 713 struct rpmh_vreg *vreg; 714 const char *pmic_id; 715 int ret; 716 717 vreg_data = of_device_get_match_data(dev); 718 if (!vreg_data) 719 return -ENODEV; 720 721 ret = of_property_read_string(dev->of_node, "qcom,pmic-id", &pmic_id); 722 if (ret < 0) { 723 dev_err(dev, "qcom,pmic-id missing in DT node\n"); 724 return ret; 725 } 726 727 for_each_available_child_of_node(dev->of_node, node) { 728 vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL); 729 if (!vreg) { 730 of_node_put(node); 731 return -ENOMEM; 732 } 733 734 ret = rpmh_regulator_init_vreg(vreg, dev, node, pmic_id, 735 vreg_data); 736 if (ret < 0) { 737 of_node_put(node); 738 return ret; 739 } 740 } 741 742 return 0; 743 } 744 745 static const struct of_device_id rpmh_regulator_match_table[] = { 746 { 747 .compatible = "qcom,pm8998-rpmh-regulators", 748 .data = pm8998_vreg_data, 749 }, 750 { 751 .compatible = "qcom,pmi8998-rpmh-regulators", 752 .data = pmi8998_vreg_data, 753 }, 754 { 755 .compatible = "qcom,pm8005-rpmh-regulators", 756 .data = pm8005_vreg_data, 757 }, 758 {} 759 }; 760 MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table); 761 762 static struct platform_driver rpmh_regulator_driver = { 763 .driver = { 764 .name = "qcom-rpmh-regulator", 765 .of_match_table = of_match_ptr(rpmh_regulator_match_table), 766 }, 767 .probe = rpmh_regulator_probe, 768 }; 769 module_platform_driver(rpmh_regulator_driver); 770 771 MODULE_DESCRIPTION("Qualcomm RPMh regulator driver"); 772 MODULE_LICENSE("GPL v2"); 773