1 /* 2 * helpers.c -- Voltage/Current Regulator framework helper functions. 3 * 4 * Copyright 2007, 2008 Wolfson Microelectronics PLC. 5 * Copyright 2008 SlimLogic Ltd. 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or (at your 10 * option) any later version. 11 * 12 */ 13 14 #include <linux/kernel.h> 15 #include <linux/err.h> 16 #include <linux/delay.h> 17 #include <linux/regmap.h> 18 #include <linux/regulator/consumer.h> 19 #include <linux/regulator/driver.h> 20 #include <linux/module.h> 21 22 /** 23 * regulator_is_enabled_regmap - standard is_enabled() for regmap users 24 * 25 * @rdev: regulator to operate on 26 * 27 * Regulators that use regmap for their register I/O can set the 28 * enable_reg and enable_mask fields in their descriptor and then use 29 * this as their is_enabled operation, saving some code. 30 */ 31 int regulator_is_enabled_regmap(struct regulator_dev *rdev) 32 { 33 unsigned int val; 34 int ret; 35 36 ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); 37 if (ret != 0) 38 return ret; 39 40 val &= rdev->desc->enable_mask; 41 42 if (rdev->desc->enable_is_inverted) { 43 if (rdev->desc->enable_val) 44 return val != rdev->desc->enable_val; 45 return val == 0; 46 } else { 47 if (rdev->desc->enable_val) 48 return val == rdev->desc->enable_val; 49 return val != 0; 50 } 51 } 52 EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap); 53 54 /** 55 * regulator_enable_regmap - standard enable() for regmap users 56 * 57 * @rdev: regulator to operate on 58 * 59 * Regulators that use regmap for their register I/O can set the 60 * enable_reg and enable_mask fields in their descriptor and then use 61 * this as their enable() operation, saving some code. 62 */ 63 int regulator_enable_regmap(struct regulator_dev *rdev) 64 { 65 unsigned int val; 66 67 if (rdev->desc->enable_is_inverted) { 68 val = rdev->desc->disable_val; 69 } else { 70 val = rdev->desc->enable_val; 71 if (!val) 72 val = rdev->desc->enable_mask; 73 } 74 75 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 76 rdev->desc->enable_mask, val); 77 } 78 EXPORT_SYMBOL_GPL(regulator_enable_regmap); 79 80 /** 81 * regulator_disable_regmap - standard disable() for regmap users 82 * 83 * @rdev: regulator to operate on 84 * 85 * Regulators that use regmap for their register I/O can set the 86 * enable_reg and enable_mask fields in their descriptor and then use 87 * this as their disable() operation, saving some code. 88 */ 89 int regulator_disable_regmap(struct regulator_dev *rdev) 90 { 91 unsigned int val; 92 93 if (rdev->desc->enable_is_inverted) { 94 val = rdev->desc->enable_val; 95 if (!val) 96 val = rdev->desc->enable_mask; 97 } else { 98 val = rdev->desc->disable_val; 99 } 100 101 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 102 rdev->desc->enable_mask, val); 103 } 104 EXPORT_SYMBOL_GPL(regulator_disable_regmap); 105 106 /** 107 * regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users 108 * 109 * @rdev: regulator to operate on 110 * 111 * Regulators that use regmap for their register I/O can set the 112 * vsel_reg and vsel_mask fields in their descriptor and then use this 113 * as their get_voltage_vsel operation, saving some code. 114 */ 115 int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev) 116 { 117 unsigned int val; 118 int ret; 119 120 ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); 121 if (ret != 0) 122 return ret; 123 124 val &= rdev->desc->vsel_mask; 125 val >>= ffs(rdev->desc->vsel_mask) - 1; 126 127 return val; 128 } 129 EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap); 130 131 /** 132 * regulator_set_voltage_sel_regmap - standard set_voltage_sel for regmap users 133 * 134 * @rdev: regulator to operate on 135 * @sel: Selector to set 136 * 137 * Regulators that use regmap for their register I/O can set the 138 * vsel_reg and vsel_mask fields in their descriptor and then use this 139 * as their set_voltage_vsel operation, saving some code. 140 */ 141 int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel) 142 { 143 int ret; 144 145 sel <<= ffs(rdev->desc->vsel_mask) - 1; 146 147 ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, 148 rdev->desc->vsel_mask, sel); 149 if (ret) 150 return ret; 151 152 if (rdev->desc->apply_bit) 153 ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg, 154 rdev->desc->apply_bit, 155 rdev->desc->apply_bit); 156 return ret; 157 } 158 EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap); 159 160 /** 161 * regulator_map_voltage_iterate - map_voltage() based on list_voltage() 162 * 163 * @rdev: Regulator to operate on 164 * @min_uV: Lower bound for voltage 165 * @max_uV: Upper bound for voltage 166 * 167 * Drivers implementing set_voltage_sel() and list_voltage() can use 168 * this as their map_voltage() operation. It will find a suitable 169 * voltage by calling list_voltage() until it gets something in bounds 170 * for the requested voltages. 171 */ 172 int regulator_map_voltage_iterate(struct regulator_dev *rdev, 173 int min_uV, int max_uV) 174 { 175 int best_val = INT_MAX; 176 int selector = 0; 177 int i, ret; 178 179 /* Find the smallest voltage that falls within the specified 180 * range. 181 */ 182 for (i = 0; i < rdev->desc->n_voltages; i++) { 183 ret = rdev->desc->ops->list_voltage(rdev, i); 184 if (ret < 0) 185 continue; 186 187 if (ret < best_val && ret >= min_uV && ret <= max_uV) { 188 best_val = ret; 189 selector = i; 190 } 191 } 192 193 if (best_val != INT_MAX) 194 return selector; 195 else 196 return -EINVAL; 197 } 198 EXPORT_SYMBOL_GPL(regulator_map_voltage_iterate); 199 200 /** 201 * regulator_map_voltage_ascend - map_voltage() for ascendant voltage list 202 * 203 * @rdev: Regulator to operate on 204 * @min_uV: Lower bound for voltage 205 * @max_uV: Upper bound for voltage 206 * 207 * Drivers that have ascendant voltage list can use this as their 208 * map_voltage() operation. 209 */ 210 int regulator_map_voltage_ascend(struct regulator_dev *rdev, 211 int min_uV, int max_uV) 212 { 213 int i, ret; 214 215 for (i = 0; i < rdev->desc->n_voltages; i++) { 216 ret = rdev->desc->ops->list_voltage(rdev, i); 217 if (ret < 0) 218 continue; 219 220 if (ret > max_uV) 221 break; 222 223 if (ret >= min_uV && ret <= max_uV) 224 return i; 225 } 226 227 return -EINVAL; 228 } 229 EXPORT_SYMBOL_GPL(regulator_map_voltage_ascend); 230 231 /** 232 * regulator_map_voltage_linear - map_voltage() for simple linear mappings 233 * 234 * @rdev: Regulator to operate on 235 * @min_uV: Lower bound for voltage 236 * @max_uV: Upper bound for voltage 237 * 238 * Drivers providing min_uV and uV_step in their regulator_desc can 239 * use this as their map_voltage() operation. 240 */ 241 int regulator_map_voltage_linear(struct regulator_dev *rdev, 242 int min_uV, int max_uV) 243 { 244 int ret, voltage; 245 246 /* Allow uV_step to be 0 for fixed voltage */ 247 if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) { 248 if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV) 249 return 0; 250 else 251 return -EINVAL; 252 } 253 254 if (!rdev->desc->uV_step) { 255 BUG_ON(!rdev->desc->uV_step); 256 return -EINVAL; 257 } 258 259 if (min_uV < rdev->desc->min_uV) 260 min_uV = rdev->desc->min_uV; 261 262 ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step); 263 if (ret < 0) 264 return ret; 265 266 ret += rdev->desc->linear_min_sel; 267 268 /* Map back into a voltage to verify we're still in bounds */ 269 voltage = rdev->desc->ops->list_voltage(rdev, ret); 270 if (voltage < min_uV || voltage > max_uV) 271 return -EINVAL; 272 273 return ret; 274 } 275 EXPORT_SYMBOL_GPL(regulator_map_voltage_linear); 276 277 /** 278 * regulator_map_voltage_linear_range - map_voltage() for multiple linear ranges 279 * 280 * @rdev: Regulator to operate on 281 * @min_uV: Lower bound for voltage 282 * @max_uV: Upper bound for voltage 283 * 284 * Drivers providing linear_ranges in their descriptor can use this as 285 * their map_voltage() callback. 286 */ 287 int regulator_map_voltage_linear_range(struct regulator_dev *rdev, 288 int min_uV, int max_uV) 289 { 290 const struct regulator_linear_range *range; 291 int ret = -EINVAL; 292 int voltage, i; 293 294 if (!rdev->desc->n_linear_ranges) { 295 BUG_ON(!rdev->desc->n_linear_ranges); 296 return -EINVAL; 297 } 298 299 for (i = 0; i < rdev->desc->n_linear_ranges; i++) { 300 int linear_max_uV; 301 302 range = &rdev->desc->linear_ranges[i]; 303 linear_max_uV = range->min_uV + 304 (range->max_sel - range->min_sel) * range->uV_step; 305 306 if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV)) 307 continue; 308 309 if (min_uV <= range->min_uV) 310 min_uV = range->min_uV; 311 312 /* range->uV_step == 0 means fixed voltage range */ 313 if (range->uV_step == 0) { 314 ret = 0; 315 } else { 316 ret = DIV_ROUND_UP(min_uV - range->min_uV, 317 range->uV_step); 318 if (ret < 0) 319 return ret; 320 } 321 322 ret += range->min_sel; 323 324 break; 325 } 326 327 if (i == rdev->desc->n_linear_ranges) 328 return -EINVAL; 329 330 /* Map back into a voltage to verify we're still in bounds */ 331 voltage = rdev->desc->ops->list_voltage(rdev, ret); 332 if (voltage < min_uV || voltage > max_uV) 333 return -EINVAL; 334 335 return ret; 336 } 337 EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range); 338 339 /** 340 * regulator_list_voltage_linear - List voltages with simple calculation 341 * 342 * @rdev: Regulator device 343 * @selector: Selector to convert into a voltage 344 * 345 * Regulators with a simple linear mapping between voltages and 346 * selectors can set min_uV and uV_step in the regulator descriptor 347 * and then use this function as their list_voltage() operation, 348 */ 349 int regulator_list_voltage_linear(struct regulator_dev *rdev, 350 unsigned int selector) 351 { 352 if (selector >= rdev->desc->n_voltages) 353 return -EINVAL; 354 if (selector < rdev->desc->linear_min_sel) 355 return 0; 356 357 selector -= rdev->desc->linear_min_sel; 358 359 return rdev->desc->min_uV + (rdev->desc->uV_step * selector); 360 } 361 EXPORT_SYMBOL_GPL(regulator_list_voltage_linear); 362 363 /** 364 * regulator_list_voltage_linear_range - List voltages for linear ranges 365 * 366 * @rdev: Regulator device 367 * @selector: Selector to convert into a voltage 368 * 369 * Regulators with a series of simple linear mappings between voltages 370 * and selectors can set linear_ranges in the regulator descriptor and 371 * then use this function as their list_voltage() operation, 372 */ 373 int regulator_list_voltage_linear_range(struct regulator_dev *rdev, 374 unsigned int selector) 375 { 376 const struct regulator_linear_range *range; 377 int i; 378 379 if (!rdev->desc->n_linear_ranges) { 380 BUG_ON(!rdev->desc->n_linear_ranges); 381 return -EINVAL; 382 } 383 384 for (i = 0; i < rdev->desc->n_linear_ranges; i++) { 385 range = &rdev->desc->linear_ranges[i]; 386 387 if (!(selector >= range->min_sel && 388 selector <= range->max_sel)) 389 continue; 390 391 selector -= range->min_sel; 392 393 return range->min_uV + (range->uV_step * selector); 394 } 395 396 return -EINVAL; 397 } 398 EXPORT_SYMBOL_GPL(regulator_list_voltage_linear_range); 399 400 /** 401 * regulator_list_voltage_table - List voltages with table based mapping 402 * 403 * @rdev: Regulator device 404 * @selector: Selector to convert into a voltage 405 * 406 * Regulators with table based mapping between voltages and 407 * selectors can set volt_table in the regulator descriptor 408 * and then use this function as their list_voltage() operation. 409 */ 410 int regulator_list_voltage_table(struct regulator_dev *rdev, 411 unsigned int selector) 412 { 413 if (!rdev->desc->volt_table) { 414 BUG_ON(!rdev->desc->volt_table); 415 return -EINVAL; 416 } 417 418 if (selector >= rdev->desc->n_voltages) 419 return -EINVAL; 420 421 return rdev->desc->volt_table[selector]; 422 } 423 EXPORT_SYMBOL_GPL(regulator_list_voltage_table); 424 425 /** 426 * regulator_set_bypass_regmap - Default set_bypass() using regmap 427 * 428 * @rdev: device to operate on. 429 * @enable: state to set. 430 */ 431 int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable) 432 { 433 unsigned int val; 434 435 if (enable) { 436 val = rdev->desc->bypass_val_on; 437 if (!val) 438 val = rdev->desc->bypass_mask; 439 } else { 440 val = rdev->desc->bypass_val_off; 441 } 442 443 return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg, 444 rdev->desc->bypass_mask, val); 445 } 446 EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap); 447 448 /** 449 * regulator_set_soft_start_regmap - Default set_soft_start() using regmap 450 * 451 * @rdev: device to operate on. 452 */ 453 int regulator_set_soft_start_regmap(struct regulator_dev *rdev) 454 { 455 unsigned int val; 456 457 val = rdev->desc->soft_start_val_on; 458 if (!val) 459 val = rdev->desc->soft_start_mask; 460 461 return regmap_update_bits(rdev->regmap, rdev->desc->soft_start_reg, 462 rdev->desc->soft_start_mask, val); 463 } 464 EXPORT_SYMBOL_GPL(regulator_set_soft_start_regmap); 465 466 /** 467 * regulator_set_pull_down_regmap - Default set_pull_down() using regmap 468 * 469 * @rdev: device to operate on. 470 */ 471 int regulator_set_pull_down_regmap(struct regulator_dev *rdev) 472 { 473 unsigned int val; 474 475 val = rdev->desc->pull_down_val_on; 476 if (!val) 477 val = rdev->desc->pull_down_mask; 478 479 return regmap_update_bits(rdev->regmap, rdev->desc->pull_down_reg, 480 rdev->desc->pull_down_mask, val); 481 } 482 EXPORT_SYMBOL_GPL(regulator_set_pull_down_regmap); 483 484 /** 485 * regulator_get_bypass_regmap - Default get_bypass() using regmap 486 * 487 * @rdev: device to operate on. 488 * @enable: current state. 489 */ 490 int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable) 491 { 492 unsigned int val; 493 unsigned int val_on = rdev->desc->bypass_val_on; 494 int ret; 495 496 ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val); 497 if (ret != 0) 498 return ret; 499 500 if (!val_on) 501 val_on = rdev->desc->bypass_mask; 502 503 *enable = (val & rdev->desc->bypass_mask) == val_on; 504 505 return 0; 506 } 507 EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap); 508 509 /** 510 * regulator_set_active_discharge_regmap - Default set_active_discharge() 511 * using regmap 512 * 513 * @rdev: device to operate on. 514 * @enable: state to set, 0 to disable and 1 to enable. 515 */ 516 int regulator_set_active_discharge_regmap(struct regulator_dev *rdev, 517 bool enable) 518 { 519 unsigned int val; 520 521 if (enable) 522 val = rdev->desc->active_discharge_on; 523 else 524 val = rdev->desc->active_discharge_off; 525 526 return regmap_update_bits(rdev->regmap, 527 rdev->desc->active_discharge_reg, 528 rdev->desc->active_discharge_mask, val); 529 } 530 EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap); 531