1 /* 2 * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. 3 */ 4 5 /* 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 16 * You should have received a copy of the GNU General Public License along 17 * with this program; if not, write to the Free Software Foundation, Inc., 18 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. 19 */ 20 21 #include <linux/slab.h> 22 #include <linux/device.h> 23 #include <linux/module.h> 24 #include <linux/mfd/syscon.h> 25 #include <linux/err.h> 26 #include <linux/io.h> 27 #include <linux/platform_device.h> 28 #include <linux/of.h> 29 #include <linux/of_address.h> 30 #include <linux/regmap.h> 31 #include <linux/regulator/driver.h> 32 #include <linux/regulator/of_regulator.h> 33 34 #define LDO_RAMP_UP_UNIT_IN_CYCLES 64 /* 64 cycles per step */ 35 #define LDO_RAMP_UP_FREQ_IN_MHZ 24 /* cycle based on 24M OSC */ 36 37 #define LDO_POWER_GATE 0x00 38 #define LDO_FET_FULL_ON 0x1f 39 40 struct anatop_regulator { 41 const char *name; 42 u32 control_reg; 43 struct regmap *anatop; 44 int vol_bit_shift; 45 int vol_bit_width; 46 u32 delay_reg; 47 int delay_bit_shift; 48 int delay_bit_width; 49 int min_bit_val; 50 int min_voltage; 51 int max_voltage; 52 struct regulator_desc rdesc; 53 struct regulator_init_data *initdata; 54 bool bypass; 55 int sel; 56 }; 57 58 static int anatop_regmap_set_voltage_time_sel(struct regulator_dev *reg, 59 unsigned int old_sel, 60 unsigned int new_sel) 61 { 62 struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); 63 u32 val; 64 int ret = 0; 65 66 /* check whether need to care about LDO ramp up speed */ 67 if (anatop_reg->delay_bit_width && new_sel > old_sel) { 68 /* 69 * the delay for LDO ramp up time is 70 * based on the register setting, we need 71 * to calculate how many steps LDO need to 72 * ramp up, and how much delay needed. (us) 73 */ 74 regmap_read(anatop_reg->anatop, anatop_reg->delay_reg, &val); 75 val = (val >> anatop_reg->delay_bit_shift) & 76 ((1 << anatop_reg->delay_bit_width) - 1); 77 ret = (new_sel - old_sel) * (LDO_RAMP_UP_UNIT_IN_CYCLES << 78 val) / LDO_RAMP_UP_FREQ_IN_MHZ + 1; 79 } 80 81 return ret; 82 } 83 84 static int anatop_regmap_enable(struct regulator_dev *reg) 85 { 86 struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); 87 int sel; 88 89 sel = anatop_reg->bypass ? LDO_FET_FULL_ON : anatop_reg->sel; 90 return regulator_set_voltage_sel_regmap(reg, sel); 91 } 92 93 static int anatop_regmap_disable(struct regulator_dev *reg) 94 { 95 return regulator_set_voltage_sel_regmap(reg, LDO_POWER_GATE); 96 } 97 98 static int anatop_regmap_is_enabled(struct regulator_dev *reg) 99 { 100 return regulator_get_voltage_sel_regmap(reg) != LDO_POWER_GATE; 101 } 102 103 static int anatop_regmap_core_set_voltage_sel(struct regulator_dev *reg, 104 unsigned selector) 105 { 106 struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); 107 int ret; 108 109 if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg)) { 110 anatop_reg->sel = selector; 111 return 0; 112 } 113 114 ret = regulator_set_voltage_sel_regmap(reg, selector); 115 if (!ret) 116 anatop_reg->sel = selector; 117 return ret; 118 } 119 120 static int anatop_regmap_core_get_voltage_sel(struct regulator_dev *reg) 121 { 122 struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); 123 124 if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg)) 125 return anatop_reg->sel; 126 127 return regulator_get_voltage_sel_regmap(reg); 128 } 129 130 static int anatop_regmap_get_bypass(struct regulator_dev *reg, bool *enable) 131 { 132 struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); 133 int sel; 134 135 sel = regulator_get_voltage_sel_regmap(reg); 136 if (sel == LDO_FET_FULL_ON) 137 WARN_ON(!anatop_reg->bypass); 138 else if (sel != LDO_POWER_GATE) 139 WARN_ON(anatop_reg->bypass); 140 141 *enable = anatop_reg->bypass; 142 return 0; 143 } 144 145 static int anatop_regmap_set_bypass(struct regulator_dev *reg, bool enable) 146 { 147 struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); 148 int sel; 149 150 if (enable == anatop_reg->bypass) 151 return 0; 152 153 sel = enable ? LDO_FET_FULL_ON : anatop_reg->sel; 154 anatop_reg->bypass = enable; 155 156 return regulator_set_voltage_sel_regmap(reg, sel); 157 } 158 159 static struct regulator_ops anatop_rops = { 160 .set_voltage_sel = regulator_set_voltage_sel_regmap, 161 .get_voltage_sel = regulator_get_voltage_sel_regmap, 162 .list_voltage = regulator_list_voltage_linear, 163 .map_voltage = regulator_map_voltage_linear, 164 }; 165 166 static struct regulator_ops anatop_core_rops = { 167 .enable = anatop_regmap_enable, 168 .disable = anatop_regmap_disable, 169 .is_enabled = anatop_regmap_is_enabled, 170 .set_voltage_sel = anatop_regmap_core_set_voltage_sel, 171 .set_voltage_time_sel = anatop_regmap_set_voltage_time_sel, 172 .get_voltage_sel = anatop_regmap_core_get_voltage_sel, 173 .list_voltage = regulator_list_voltage_linear, 174 .map_voltage = regulator_map_voltage_linear, 175 .get_bypass = anatop_regmap_get_bypass, 176 .set_bypass = anatop_regmap_set_bypass, 177 }; 178 179 static int anatop_regulator_probe(struct platform_device *pdev) 180 { 181 struct device *dev = &pdev->dev; 182 struct device_node *np = dev->of_node; 183 struct device_node *anatop_np; 184 struct regulator_desc *rdesc; 185 struct regulator_dev *rdev; 186 struct anatop_regulator *sreg; 187 struct regulator_init_data *initdata; 188 struct regulator_config config = { }; 189 int ret = 0; 190 u32 val; 191 192 sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL); 193 if (!sreg) 194 return -ENOMEM; 195 sreg->name = of_get_property(np, "regulator-name", NULL); 196 rdesc = &sreg->rdesc; 197 rdesc->name = sreg->name; 198 rdesc->type = REGULATOR_VOLTAGE; 199 rdesc->owner = THIS_MODULE; 200 201 initdata = of_get_regulator_init_data(dev, np, rdesc); 202 sreg->initdata = initdata; 203 204 anatop_np = of_get_parent(np); 205 if (!anatop_np) 206 return -ENODEV; 207 sreg->anatop = syscon_node_to_regmap(anatop_np); 208 of_node_put(anatop_np); 209 if (IS_ERR(sreg->anatop)) 210 return PTR_ERR(sreg->anatop); 211 212 ret = of_property_read_u32(np, "anatop-reg-offset", 213 &sreg->control_reg); 214 if (ret) { 215 dev_err(dev, "no anatop-reg-offset property set\n"); 216 return ret; 217 } 218 ret = of_property_read_u32(np, "anatop-vol-bit-width", 219 &sreg->vol_bit_width); 220 if (ret) { 221 dev_err(dev, "no anatop-vol-bit-width property set\n"); 222 return ret; 223 } 224 ret = of_property_read_u32(np, "anatop-vol-bit-shift", 225 &sreg->vol_bit_shift); 226 if (ret) { 227 dev_err(dev, "no anatop-vol-bit-shift property set\n"); 228 return ret; 229 } 230 ret = of_property_read_u32(np, "anatop-min-bit-val", 231 &sreg->min_bit_val); 232 if (ret) { 233 dev_err(dev, "no anatop-min-bit-val property set\n"); 234 return ret; 235 } 236 ret = of_property_read_u32(np, "anatop-min-voltage", 237 &sreg->min_voltage); 238 if (ret) { 239 dev_err(dev, "no anatop-min-voltage property set\n"); 240 return ret; 241 } 242 ret = of_property_read_u32(np, "anatop-max-voltage", 243 &sreg->max_voltage); 244 if (ret) { 245 dev_err(dev, "no anatop-max-voltage property set\n"); 246 return ret; 247 } 248 249 /* read LDO ramp up setting, only for core reg */ 250 of_property_read_u32(np, "anatop-delay-reg-offset", 251 &sreg->delay_reg); 252 of_property_read_u32(np, "anatop-delay-bit-width", 253 &sreg->delay_bit_width); 254 of_property_read_u32(np, "anatop-delay-bit-shift", 255 &sreg->delay_bit_shift); 256 257 rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) / 25000 + 1 258 + sreg->min_bit_val; 259 rdesc->min_uV = sreg->min_voltage; 260 rdesc->uV_step = 25000; 261 rdesc->linear_min_sel = sreg->min_bit_val; 262 rdesc->vsel_reg = sreg->control_reg; 263 rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) << 264 sreg->vol_bit_shift; 265 266 config.dev = &pdev->dev; 267 config.init_data = initdata; 268 config.driver_data = sreg; 269 config.of_node = pdev->dev.of_node; 270 config.regmap = sreg->anatop; 271 272 /* Only core regulators have the ramp up delay configuration. */ 273 if (sreg->control_reg && sreg->delay_bit_width) { 274 rdesc->ops = &anatop_core_rops; 275 276 ret = regmap_read(config.regmap, rdesc->vsel_reg, &val); 277 if (ret) { 278 dev_err(dev, "failed to read initial state\n"); 279 return ret; 280 } 281 282 sreg->sel = (val & rdesc->vsel_mask) >> sreg->vol_bit_shift; 283 if (sreg->sel == LDO_FET_FULL_ON) { 284 sreg->sel = 0; 285 sreg->bypass = true; 286 } 287 288 /* 289 * In case vddpu was disabled by the bootloader, we need to set 290 * a sane default until imx6-cpufreq was probed and changes the 291 * voltage to the correct value. In this case we set 1.25V. 292 */ 293 if (!sreg->sel && !strcmp(sreg->name, "vddpu")) 294 sreg->sel = 22; 295 296 if (!sreg->sel) { 297 dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n"); 298 return -EINVAL; 299 } 300 } else { 301 rdesc->ops = &anatop_rops; 302 } 303 304 /* register regulator */ 305 rdev = devm_regulator_register(dev, rdesc, &config); 306 if (IS_ERR(rdev)) { 307 dev_err(dev, "failed to register %s\n", 308 rdesc->name); 309 return PTR_ERR(rdev); 310 } 311 312 platform_set_drvdata(pdev, rdev); 313 314 return 0; 315 } 316 317 static const struct of_device_id of_anatop_regulator_match_tbl[] = { 318 { .compatible = "fsl,anatop-regulator", }, 319 { /* end */ } 320 }; 321 MODULE_DEVICE_TABLE(of, of_anatop_regulator_match_tbl); 322 323 static struct platform_driver anatop_regulator_driver = { 324 .driver = { 325 .name = "anatop_regulator", 326 .of_match_table = of_anatop_regulator_match_tbl, 327 }, 328 .probe = anatop_regulator_probe, 329 }; 330 331 static int __init anatop_regulator_init(void) 332 { 333 return platform_driver_register(&anatop_regulator_driver); 334 } 335 postcore_initcall(anatop_regulator_init); 336 337 static void __exit anatop_regulator_exit(void) 338 { 339 platform_driver_unregister(&anatop_regulator_driver); 340 } 341 module_exit(anatop_regulator_exit); 342 343 MODULE_AUTHOR("Nancy Chen <Nancy.Chen@freescale.com>"); 344 MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>"); 345 MODULE_DESCRIPTION("ANATOP Regulator driver"); 346 MODULE_LICENSE("GPL v2"); 347 MODULE_ALIAS("platform:anatop_regulator"); 348