1menuconfig REGULATOR 2 bool "Voltage and Current Regulator Support" 3 help 4 Generic Voltage and Current Regulator support. 5 6 This framework is designed to provide a generic interface to voltage 7 and current regulators within the Linux kernel. It's intended to 8 provide voltage and current control to client or consumer drivers and 9 also provide status information to user space applications through a 10 sysfs interface. 11 12 The intention is to allow systems to dynamically control regulator 13 output in order to save power and prolong battery life. This applies 14 to both voltage regulators (where voltage output is controllable) and 15 current sinks (where current output is controllable). 16 17 This framework safely compiles out if not selected so that client 18 drivers can still be used in systems with no software controllable 19 regulators. 20 21 If unsure, say no. 22 23if REGULATOR 24 25config REGULATOR_DEBUG 26 bool "Regulator debug support" 27 help 28 Say yes here to enable debugging support. 29 30config REGULATOR_FIXED_VOLTAGE 31 tristate "Fixed voltage regulator support" 32 help 33 This driver provides support for fixed voltage regulators, 34 useful for systems which use a combination of software 35 managed regulators and simple non-configurable regulators. 36 37config REGULATOR_VIRTUAL_CONSUMER 38 tristate "Virtual regulator consumer support" 39 help 40 This driver provides a virtual consumer for the voltage and 41 current regulator API which provides sysfs controls for 42 configuring the supplies requested. This is mainly useful 43 for test purposes. 44 45 If unsure, say no. 46 47config REGULATOR_USERSPACE_CONSUMER 48 tristate "Userspace regulator consumer support" 49 help 50 There are some classes of devices that are controlled entirely 51 from user space. Userspace consumer driver provides ability to 52 control power supplies for such devices. 53 54 If unsure, say no. 55 56config REGULATOR_BQ24022 57 tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" 58 help 59 This driver controls a TI bq24022 Charger attached via 60 GPIOs. The provided current regulator can enable/disable 61 charging select between 100 mA and 500 mA charging current 62 limit. 63 64config REGULATOR_MAX1586 65 tristate "Maxim 1586/1587 voltage regulator" 66 depends on I2C 67 help 68 This driver controls a Maxim 1586 or 1587 voltage output 69 regulator via I2C bus. The provided regulator is suitable 70 for PXA27x chips to control VCC_CORE and VCC_USIM voltages. 71 72config REGULATOR_MAX8660 73 tristate "Maxim 8660/8661 voltage regulator" 74 depends on I2C 75 help 76 This driver controls a Maxim 8660/8661 voltage output 77 regulator via I2C bus. 78 79config REGULATOR_TWL4030 80 bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC" 81 depends on TWL4030_CORE 82 help 83 This driver supports the voltage regulators provided by 84 this family of companion chips. 85 86config REGULATOR_WM831X 87 tristate "Wolfson Microelcronics WM831x PMIC regulators" 88 depends on MFD_WM831X 89 help 90 Support the voltage and current regulators of the WM831x series 91 of PMIC devices. 92 93config REGULATOR_WM8350 94 tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC" 95 depends on MFD_WM8350 96 help 97 This driver provides support for the voltage and current regulators 98 of the WM8350 AudioPlus PMIC. 99 100config REGULATOR_WM8400 101 tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC" 102 depends on MFD_WM8400 103 help 104 This driver provides support for the voltage regulators of the 105 WM8400 AudioPlus PMIC. 106 107config REGULATOR_DA903X 108 tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" 109 depends on PMIC_DA903X 110 help 111 Say y here to support the BUCKs and LDOs regulators found on 112 Dialog Semiconductor DA9030/DA9034 PMIC. 113 114config REGULATOR_PCF50633 115 tristate "PCF50633 regulator driver" 116 depends on MFD_PCF50633 117 help 118 Say Y here to support the voltage regulators and convertors 119 on PCF50633 120 121config REGULATOR_LP3971 122 tristate "National Semiconductors LP3971 PMIC regulator driver" 123 depends on I2C 124 help 125 Say Y here to support the voltage regulators and convertors 126 on National Semiconductors LP3971 PMIC 127 128config REGULATOR_PCAP 129 tristate "PCAP2 regulator driver" 130 depends on EZX_PCAP 131 help 132 This driver provides support for the voltage regulators of the 133 PCAP2 PMIC. 134 135config REGULATOR_MC13783 136 tristate "Support regulators on Freescale MC13783 PMIC" 137 depends on MFD_MC13783 138 help 139 Say y here to support the regulators found on the Freescale MC13783 140 PMIC. 141 142config REGULATOR_AB3100 143 tristate "ST-Ericsson AB3100 Regulator functions" 144 depends on AB3100_CORE 145 default y if AB3100_CORE 146 help 147 These regulators correspond to functionality in the 148 AB3100 analog baseband dealing with power regulators 149 for the system. 150 151config REGULATOR_TPS65023 152 tristate "TI TPS65023 Power regulators" 153 depends on I2C 154 help 155 This driver supports TPS65023 voltage regulator chips. TPS65023 provides 156 three step-down converters and two general-purpose LDO voltage regulators. 157 It supports TI's software based Class-2 SmartReflex implementation. 158 159config REGULATOR_TPS6507X 160 tristate "TI TPS6507X Power regulators" 161 depends on I2C 162 help 163 This driver supports TPS6507X voltage regulator chips. TPS6507X provides 164 three step-down converters and two general-purpose LDO voltage regulators. 165 It supports TI's software based Class-2 SmartReflex implementation. 166 167config REGULATOR_88PM8607 168 bool "Marvell 88PM8607 Power regulators" 169 depends on MFD_88PM8607=y 170 help 171 This driver supports 88PM8607 voltage regulator chips. 172 173endif 174 175