1menuconfig REGULATOR 2 bool "Voltage and Current Regulator Support" 3 help 4 Generic Voltage and Current Regulator support. 5 6 This framework is designed to provide a generic interface to voltage 7 and current regulators within the Linux kernel. It's intended to 8 provide voltage and current control to client or consumer drivers and 9 also provide status information to user space applications through a 10 sysfs interface. 11 12 The intention is to allow systems to dynamically control regulator 13 output in order to save power and prolong battery life. This applies 14 to both voltage regulators (where voltage output is controllable) and 15 current sinks (where current output is controllable). 16 17 This framework safely compiles out if not selected so that client 18 drivers can still be used in systems with no software controllable 19 regulators. 20 21 If unsure, say no. 22 23 24if REGULATOR 25 26config REGULATOR_DEBUG 27 bool "Regulator debug support" 28 help 29 Say yes here to enable debugging support. 30 31config REGULATOR_DUMMY 32 bool "Provide a dummy regulator if regulator lookups fail" 33 help 34 If this option is enabled then when a regulator lookup fails 35 and the board has not specified that it has provided full 36 constraints the regulator core will provide an always 37 enabled dummy regulator, allowing consumer drivers to continue. 38 39 A warning will be generated when this substitution is done. 40 41config REGULATOR_FIXED_VOLTAGE 42 tristate "Fixed voltage regulator support" 43 help 44 This driver provides support for fixed voltage regulators, 45 useful for systems which use a combination of software 46 managed regulators and simple non-configurable regulators. 47 48config REGULATOR_VIRTUAL_CONSUMER 49 tristate "Virtual regulator consumer support" 50 help 51 This driver provides a virtual consumer for the voltage and 52 current regulator API which provides sysfs controls for 53 configuring the supplies requested. This is mainly useful 54 for test purposes. 55 56 If unsure, say no. 57 58config REGULATOR_USERSPACE_CONSUMER 59 tristate "Userspace regulator consumer support" 60 help 61 There are some classes of devices that are controlled entirely 62 from user space. Userspace consumer driver provides ability to 63 control power supplies for such devices. 64 65 If unsure, say no. 66 67config REGULATOR_GPIO 68 tristate "GPIO regulator support" 69 depends on GPIOLIB 70 help 71 This driver provides support for regulators that can be 72 controlled via gpios. 73 It is capable of supporting current and voltage regulators 74 and the platform has to provide a mapping of GPIO-states 75 to target volts/amps. 76 77config REGULATOR_AD5398 78 tristate "Analog Devices AD5398/AD5821 regulators" 79 depends on I2C 80 help 81 This driver supports AD5398 and AD5821 current regulator chips. 82 If building into module, its name is ad5398.ko. 83 84config REGULATOR_AAT2870 85 tristate "AnalogicTech AAT2870 Regulators" 86 depends on MFD_AAT2870_CORE 87 help 88 If you have a AnalogicTech AAT2870 say Y to enable the 89 regulator driver. 90 91config REGULATOR_ARIZONA 92 tristate "Wolfson Arizona class devices" 93 depends on MFD_ARIZONA 94 depends on SND_SOC 95 help 96 Support for the regulators found on Wolfson Arizona class 97 devices. 98 99config REGULATOR_DA903X 100 tristate "Dialog Semiconductor DA9030/DA9034 regulators" 101 depends on PMIC_DA903X 102 help 103 Say y here to support the BUCKs and LDOs regulators found on 104 Dialog Semiconductor DA9030/DA9034 PMIC. 105 106config REGULATOR_DA9052 107 tristate "Dialog Semiconductor DA9052/DA9053 regulators" 108 depends on PMIC_DA9052 109 help 110 This driver supports the voltage regulators of DA9052-BC and 111 DA9053-AA/Bx PMIC. 112 113config REGULATOR_DA9055 114 tristate "Dialog Semiconductor DA9055 regulators" 115 depends on MFD_DA9055 116 help 117 Say y here to support the BUCKs and LDOs regulators found on 118 Dialog Semiconductor DA9055 PMIC. 119 120 This driver can also be built as a module. If so, the module 121 will be called da9055-regulator. 122 123config REGULATOR_FAN53555 124 tristate "Fairchild FAN53555 Regulator" 125 depends on I2C 126 select REGMAP_I2C 127 help 128 This driver supports Fairchild FAN53555 Digitally Programmable 129 TinyBuck Regulator. The FAN53555 is a step-down switching voltage 130 regulator that delivers a digitally programmable output from an 131 input voltage supply of 2.5V to 5.5V. The output voltage is 132 programmed through an I2C interface. 133 134config REGULATOR_ANATOP 135 tristate "Freescale i.MX on-chip ANATOP LDO regulators" 136 depends on MFD_SYSCON 137 help 138 Say y here to support Freescale i.MX on-chip ANATOP LDOs 139 regulators. It is recommended that this option be 140 enabled on i.MX6 platform. 141 142config REGULATOR_MC13XXX_CORE 143 tristate 144 145config REGULATOR_MC13783 146 tristate "Freescale MC13783 regulator driver" 147 depends on MFD_MC13783 148 select REGULATOR_MC13XXX_CORE 149 help 150 Say y here to support the regulators found on the Freescale MC13783 151 PMIC. 152 153config REGULATOR_MC13892 154 tristate "Freescale MC13892 regulator driver" 155 depends on MFD_MC13XXX 156 select REGULATOR_MC13XXX_CORE 157 help 158 Say y here to support the regulators found on the Freescale MC13892 159 PMIC. 160 161config REGULATOR_ISL6271A 162 tristate "Intersil ISL6271A Power regulator" 163 depends on I2C 164 help 165 This driver supports ISL6271A voltage regulator chip. 166 167config REGULATOR_88PM8607 168 bool "Marvell 88PM8607 Power regulators" 169 depends on MFD_88PM860X=y 170 help 171 This driver supports 88PM8607 voltage regulator chips. 172 173config REGULATOR_MAX1586 174 tristate "Maxim 1586/1587 voltage regulator" 175 depends on I2C 176 help 177 This driver controls a Maxim 1586 or 1587 voltage output 178 regulator via I2C bus. The provided regulator is suitable 179 for PXA27x chips to control VCC_CORE and VCC_USIM voltages. 180 181config REGULATOR_MAX8649 182 tristate "Maxim 8649 voltage regulator" 183 depends on I2C 184 select REGMAP_I2C 185 help 186 This driver controls a Maxim 8649 voltage output regulator via 187 I2C bus. 188 189config REGULATOR_MAX8660 190 tristate "Maxim 8660/8661 voltage regulator" 191 depends on I2C 192 help 193 This driver controls a Maxim 8660/8661 voltage output 194 regulator via I2C bus. 195 196config REGULATOR_MAX8907 197 tristate "Maxim 8907 voltage regulator" 198 depends on MFD_MAX8907 199 help 200 This driver controls a Maxim 8907 voltage output regulator 201 via I2C bus. The provided regulator is suitable for Tegra 202 chip to control Step-Down DC-DC and LDOs. 203 204config REGULATOR_MAX8925 205 tristate "Maxim MAX8925 Power Management IC" 206 depends on MFD_MAX8925 207 help 208 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. 209 210config REGULATOR_MAX8952 211 tristate "Maxim MAX8952 Power Management IC" 212 depends on I2C 213 help 214 This driver controls a Maxim 8952 voltage output regulator 215 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS 216 modes ranging from 0.77V to 1.40V by 0.01V steps. 217 218config REGULATOR_MAX8973 219 tristate "Maxim MAX8973 voltage regulator " 220 depends on I2C 221 select REGMAP_I2C 222 help 223 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down 224 switching regulator delievers up to 9A of output current. Each 225 phase operates at a 2MHz fixed frequency with a 120 deg shift 226 from the adjacent phase, allowing the use of small magnetic component. 227 228config REGULATOR_MAX8997 229 tristate "Maxim 8997/8966 regulator" 230 depends on MFD_MAX8997 231 help 232 This driver controls a Maxim 8997/8966 regulator 233 via I2C bus. The provided regulator is suitable for S5PC110, 234 S5PV210, and Exynos-4 chips to control VCC_CORE and 235 VCC_USIM voltages. 236 237config REGULATOR_MAX8998 238 tristate "Maxim 8998 voltage regulator" 239 depends on MFD_MAX8998 240 help 241 This driver controls a Maxim 8998 voltage output regulator 242 via I2C bus. The provided regulator is suitable for S3C6410 243 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. 244 245config REGULATOR_MAX77686 246 tristate "Maxim 77686 regulator" 247 depends on MFD_MAX77686 248 help 249 This driver controls a Maxim 77686 regulator 250 via I2C bus. The provided regulator is suitable for 251 Exynos-4 chips to control VARM and VINT voltages. 252 253config REGULATOR_MAX77693 254 tristate "Maxim MAX77693 regulator" 255 depends on MFD_MAX77693 256 help 257 This driver controls a Maxim 77693 regulator via I2C bus. 258 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' 259 and one current regulator 'CHARGER'. This is suitable for 260 Exynos-4x12 chips. 261 262config REGULATOR_PCAP 263 tristate "Motorola PCAP2 regulator driver" 264 depends on EZX_PCAP 265 help 266 This driver provides support for the voltage regulators of the 267 PCAP2 PMIC. 268 269config REGULATOR_LP3971 270 tristate "National Semiconductors LP3971 PMIC regulator driver" 271 depends on I2C 272 help 273 Say Y here to support the voltage regulators and convertors 274 on National Semiconductors LP3971 PMIC 275 276config REGULATOR_LP3972 277 tristate "National Semiconductors LP3972 PMIC regulator driver" 278 depends on I2C 279 help 280 Say Y here to support the voltage regulators and convertors 281 on National Semiconductors LP3972 PMIC 282 283config REGULATOR_LP872X 284 bool "TI/National Semiconductor LP8720/LP8725 voltage regulators" 285 depends on I2C=y 286 select REGMAP_I2C 287 help 288 This driver supports LP8720/LP8725 PMIC 289 290config REGULATOR_LP8755 291 tristate "TI LP8755 High Performance PMU driver" 292 depends on I2C 293 select REGMAP_I2C 294 help 295 This driver supports LP8755 High Performance PMU driver. This 296 chip contains six step-down DC/DC converters which can support 297 9 mode multiphase configuration. 298 299config REGULATOR_LP8788 300 bool "TI LP8788 Power Regulators" 301 depends on MFD_LP8788 302 help 303 This driver supports LP8788 voltage regulator chip. 304 305config REGULATOR_PCF50633 306 tristate "NXP PCF50633 regulator driver" 307 depends on MFD_PCF50633 308 help 309 Say Y here to support the voltage regulators and convertors 310 on PCF50633 311 312config REGULATOR_RC5T583 313 tristate "RICOH RC5T583 Power regulators" 314 depends on MFD_RC5T583 315 help 316 Select this option to enable the power regulator of RICOH 317 PMIC RC5T583. 318 This driver supports the control of different power rails of device 319 through regulator interface. The device supports multiple DCDC/LDO 320 outputs which can be controlled by i2c communication. 321 322config REGULATOR_S2MPS11 323 tristate "Samsung S2MPS11 voltage regulator" 324 depends on MFD_SEC_CORE 325 help 326 This driver supports a Samsung S2MPS11 voltage output regulator 327 via I2C bus. S2MPS11 is comprised of high efficient Buck converters 328 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. 329 330config REGULATOR_S5M8767 331 tristate "Samsung S5M8767A voltage regulator" 332 depends on MFD_SEC_CORE 333 help 334 This driver supports a Samsung S5M8767A voltage output regulator 335 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and 336 supports DVS mode with 8bits of output voltage control. 337 338config REGULATOR_AB3100 339 tristate "ST-Ericsson AB3100 Regulator functions" 340 depends on AB3100_CORE 341 default y if AB3100_CORE 342 help 343 These regulators correspond to functionality in the 344 AB3100 analog baseband dealing with power regulators 345 for the system. 346 347config REGULATOR_AB8500 348 bool "ST-Ericsson AB8500 Power Regulators" 349 depends on AB8500_CORE 350 help 351 This driver supports the regulators found on the ST-Ericsson mixed 352 signal AB8500 PMIC 353 354config REGULATOR_DBX500_PRCMU 355 bool 356 357config REGULATOR_DB8500_PRCMU 358 bool "ST-Ericsson DB8500 Voltage Domain Regulators" 359 depends on MFD_DB8500_PRCMU 360 select REGULATOR_DBX500_PRCMU 361 help 362 This driver supports the voltage domain regulators controlled by the 363 DB8500 PRCMU 364 365config REGULATOR_PALMAS 366 tristate "TI Palmas PMIC Regulators" 367 depends on MFD_PALMAS 368 help 369 If you wish to control the regulators on the Palmas series of 370 chips say Y here. This will enable support for all the software 371 controllable SMPS/LDO regulators. 372 373 The regulators available on Palmas series chips vary depending 374 on the muxing. This is handled automatically in the driver by 375 reading the mux info from OTP. 376 377config REGULATOR_TPS51632 378 tristate "TI TPS51632 Power Regulator" 379 depends on I2C 380 select REGMAP_I2C 381 help 382 This driver supports TPS51632 voltage regulator chip. 383 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller 384 with Serial VID control and DVFS. 385 The voltage output can be configure through I2C interface or PWM 386 interface. 387 388config REGULATOR_TPS6105X 389 tristate "TI TPS6105X Power regulators" 390 depends on TPS6105X 391 default y if TPS6105X 392 help 393 This driver supports TPS61050/TPS61052 voltage regulator chips. 394 It is a single boost converter primarily for white LEDs and 395 audio amplifiers. 396 397config REGULATOR_TPS62360 398 tristate "TI TPS6236x Power Regulator" 399 depends on I2C 400 select REGMAP_I2C 401 help 402 This driver supports TPS6236x voltage regulator chip. This 403 regulator is meant for processor core supply. This chip is 404 high-frequency synchronous step down dc-dc converter optimized 405 for battery-powered portable applications. 406 407config REGULATOR_TPS65023 408 tristate "TI TPS65023 Power regulators" 409 depends on I2C 410 select REGMAP_I2C 411 help 412 This driver supports TPS65023 voltage regulator chips. TPS65023 provides 413 three step-down converters and two general-purpose LDO voltage regulators. 414 It supports TI's software based Class-2 SmartReflex implementation. 415 416config REGULATOR_TPS6507X 417 tristate "TI TPS6507X Power regulators" 418 depends on I2C 419 help 420 This driver supports TPS6507X voltage regulator chips. TPS6507X provides 421 three step-down converters and two general-purpose LDO voltage regulators. 422 It supports TI's software based Class-2 SmartReflex implementation. 423 424config REGULATOR_TPS65090 425 tristate "TI TPS65090 Power regulator" 426 depends on MFD_TPS65090 427 help 428 This driver provides support for the voltage regulators on the 429 TI TPS65090 PMIC. 430 431config REGULATOR_TPS65217 432 tristate "TI TPS65217 Power regulators" 433 depends on MFD_TPS65217 434 help 435 This driver supports TPS65217 voltage regulator chips. TPS65217 436 provides three step-down converters and four general-purpose LDO 437 voltage regulators. It supports software based voltage control 438 for different voltage domains 439 440config REGULATOR_TPS6524X 441 tristate "TI TPS6524X Power regulators" 442 depends on SPI 443 help 444 This driver supports TPS6524X voltage regulator chips. TPS6524X 445 provides three step-down converters and two general-purpose LDO 446 voltage regulators. This device is interfaced using a customized 447 serial interface currently supported on the sequencer serial 448 port controller. 449 450config REGULATOR_TPS6586X 451 tristate "TI TPS6586X Power regulators" 452 depends on MFD_TPS6586X 453 help 454 This driver supports TPS6586X voltage regulator chips. 455 456config REGULATOR_TPS65910 457 tristate "TI TPS65910/TPS65911 Power Regulators" 458 depends on MFD_TPS65910 459 help 460 This driver supports TPS65910/TPS65911 voltage regulator chips. 461 462config REGULATOR_TPS65912 463 tristate "TI TPS65912 Power regulator" 464 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) 465 help 466 This driver supports TPS65912 voltage regulator chip. 467 468config REGULATOR_TPS80031 469 tristate "TI TPS80031/TPS80032 power regualtor driver" 470 depends on MFD_TPS80031 471 help 472 TPS80031/ TPS80032 Fully Integrated Power Management with Power 473 Path and Battery Charger. It has 5 configurable step-down 474 converters, 11 general purpose LDOs, VBUS generator and digital 475 output to control regulators. 476 477config REGULATOR_TWL4030 478 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" 479 depends on TWL4030_CORE 480 help 481 This driver supports the voltage regulators provided by 482 this family of companion chips. 483 484config REGULATOR_TI_ABB 485 bool "TI Adaptive Body Bias on-chip LDO" 486 depends on ARCH_OMAP 487 help 488 Select this option to support Texas Instruments' on-chip Adaptive Body 489 Bias (ABB) LDO regulators. It is recommended that this option be 490 enabled on required TI SoC. Certain Operating Performance Points 491 on TI SoCs may be unstable without enabling this as it provides 492 device specific optimized bias to allow/optimize functionality. 493 494config REGULATOR_VEXPRESS 495 tristate "Versatile Express regulators" 496 depends on VEXPRESS_CONFIG 497 help 498 This driver provides support for voltage regulators available 499 on the ARM Ltd's Versatile Express platform. 500 501config REGULATOR_WM831X 502 tristate "Wolfson Microelectronics WM831x PMIC regulators" 503 depends on MFD_WM831X 504 help 505 Support the voltage and current regulators of the WM831x series 506 of PMIC devices. 507 508config REGULATOR_WM8350 509 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" 510 depends on MFD_WM8350 511 help 512 This driver provides support for the voltage and current regulators 513 of the WM8350 AudioPlus PMIC. 514 515config REGULATOR_WM8400 516 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" 517 depends on MFD_WM8400 518 help 519 This driver provides support for the voltage regulators of the 520 WM8400 AudioPlus PMIC. 521 522config REGULATOR_WM8994 523 tristate "Wolfson Microelectronics WM8994 CODEC" 524 depends on MFD_WM8994 525 help 526 This driver provides support for the voltage regulators on the 527 WM8994 CODEC. 528 529config REGULATOR_AS3711 530 tristate "AS3711 PMIC" 531 depends on MFD_AS3711 532 help 533 This driver provides support for the voltage regulators on the 534 AS3711 PMIC 535 536endif 537 538