xref: /openbmc/linux/drivers/regulator/Kconfig (revision 5976f095)
1menuconfig REGULATOR
2	bool "Voltage and Current Regulator Support"
3	help
4	  Generic Voltage and Current Regulator support.
5
6	  This framework is designed to provide a generic interface to voltage
7	  and current regulators within the Linux kernel. It's intended to
8	  provide voltage and current control to client or consumer drivers and
9	  also provide status information to user space applications through a
10	  sysfs interface.
11
12	  The intention is to allow systems to dynamically control regulator
13	  output in order to save power and prolong battery life. This applies
14	  to both voltage regulators (where voltage output is controllable) and
15	  current sinks (where current output is controllable).
16
17	  This framework safely compiles out if not selected so that client
18	  drivers can still be used in systems with no software controllable
19	  regulators.
20
21	  If unsure, say no.
22
23if REGULATOR
24
25config REGULATOR_DEBUG
26	bool "Regulator debug support"
27	help
28	  Say yes here to enable debugging support.
29
30config REGULATOR_DUMMY
31	bool "Provide a dummy regulator if regulator lookups fail"
32	help
33	  If this option is enabled then when a regulator lookup fails
34	  and the board has not specified that it has provided full
35	  constraints then the regulator core will provide an always
36	  enabled dummy regulator will be provided, allowing consumer
37	  drivers to continue.
38
39	  A warning will be generated when this substitution is done.
40
41config REGULATOR_FIXED_VOLTAGE
42	tristate "Fixed voltage regulator support"
43	help
44	  This driver provides support for fixed voltage regulators,
45	  useful for systems which use a combination of software
46	  managed regulators and simple non-configurable regulators.
47
48config REGULATOR_VIRTUAL_CONSUMER
49	tristate "Virtual regulator consumer support"
50	help
51	  This driver provides a virtual consumer for the voltage and
52          current regulator API which provides sysfs controls for
53          configuring the supplies requested.  This is mainly useful
54          for test purposes.
55
56          If unsure, say no.
57
58config REGULATOR_USERSPACE_CONSUMER
59	tristate "Userspace regulator consumer support"
60	help
61	  There are some classes of devices that are controlled entirely
62	  from user space. Userspace consumer driver provides ability to
63	  control power supplies for such devices.
64
65          If unsure, say no.
66
67config REGULATOR_BQ24022
68	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
69	help
70	  This driver controls a TI bq24022 Charger attached via
71	  GPIOs. The provided current regulator can enable/disable
72	  charging select between 100 mA and 500 mA charging current
73	  limit.
74
75config REGULATOR_MAX1586
76	tristate "Maxim 1586/1587 voltage regulator"
77	depends on I2C
78	help
79	  This driver controls a Maxim 1586 or 1587 voltage output
80	  regulator via I2C bus. The provided regulator is suitable
81	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
82
83config REGULATOR_MAX8649
84	tristate "Maxim 8649 voltage regulator"
85	depends on I2C
86	help
87	  This driver controls a Maxim 8649 voltage output regulator via
88	  I2C bus.
89
90config REGULATOR_MAX8660
91	tristate "Maxim 8660/8661 voltage regulator"
92	depends on I2C
93	help
94	  This driver controls a Maxim 8660/8661 voltage output
95	  regulator via I2C bus.
96
97config REGULATOR_MAX8925
98	tristate "Maxim MAX8925 Power Management IC"
99	depends on MFD_MAX8925
100	help
101	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
102
103config REGULATOR_MAX8952
104	tristate "Maxim MAX8952 Power Management IC"
105	depends on I2C
106	help
107	  This driver controls a Maxim 8952 voltage output regulator
108	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
109	  modes ranging from 0.77V to 1.40V by 0.01V steps.
110
111config REGULATOR_MAX8998
112	tristate "Maxim 8998 voltage regulator"
113	depends on MFD_MAX8998
114	help
115	  This driver controls a Maxim 8998 voltage output regulator
116	  via I2C bus. The provided regulator is suitable for S3C6410
117	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
118
119config REGULATOR_TWL4030
120	bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
121	depends on TWL4030_CORE
122	help
123	  This driver supports the voltage regulators provided by
124	  this family of companion chips.
125
126config REGULATOR_WM831X
127	tristate "Wolfson Microelcronics WM831x PMIC regulators"
128	depends on MFD_WM831X
129	help
130	  Support the voltage and current regulators of the WM831x series
131	  of PMIC devices.
132
133config REGULATOR_WM8350
134	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
135	depends on MFD_WM8350
136	help
137	  This driver provides support for the voltage and current regulators
138          of the WM8350 AudioPlus PMIC.
139
140config REGULATOR_WM8400
141	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
142	depends on MFD_WM8400
143	help
144	  This driver provides support for the voltage regulators of the
145	  WM8400 AudioPlus PMIC.
146
147config REGULATOR_WM8994
148	tristate "Wolfson Microelectronics WM8994 CODEC"
149	depends on MFD_WM8994
150	help
151	  This driver provides support for the voltage regulators on the
152	  WM8994 CODEC.
153
154config REGULATOR_DA903X
155	tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
156	depends on PMIC_DA903X
157	help
158	  Say y here to support the BUCKs and LDOs regulators found on
159	  Dialog Semiconductor DA9030/DA9034 PMIC.
160
161config REGULATOR_PCF50633
162	tristate "PCF50633 regulator driver"
163        depends on MFD_PCF50633
164	help
165	 Say Y here to support the voltage regulators and convertors
166	 on PCF50633
167
168config REGULATOR_LP3971
169	tristate "National Semiconductors LP3971 PMIC regulator driver"
170	depends on I2C
171	help
172	 Say Y here to support the voltage regulators and convertors
173	 on National Semiconductors LP3971 PMIC
174
175config REGULATOR_LP3972
176	tristate "National Semiconductors LP3972 PMIC regulator driver"
177	depends on I2C
178	help
179	 Say Y here to support the voltage regulators and convertors
180	 on National Semiconductors LP3972 PMIC
181
182config REGULATOR_PCAP
183	tristate "PCAP2 regulator driver"
184	depends on EZX_PCAP
185	help
186	 This driver provides support for the voltage regulators of the
187	 PCAP2 PMIC.
188
189config REGULATOR_MC13783
190	tristate "Support regulators on Freescale MC13783 PMIC"
191	depends on MFD_MC13783
192	help
193	  Say y here to support the regulators found on the Freescale MC13783
194	  PMIC.
195
196config REGULATOR_AB3100
197	tristate "ST-Ericsson AB3100 Regulator functions"
198	depends on AB3100_CORE
199	default y if AB3100_CORE
200	help
201	 These regulators correspond to functionality in the
202	 AB3100 analog baseband dealing with power regulators
203	 for the system.
204
205config REGULATOR_TPS65023
206	tristate "TI TPS65023 Power regulators"
207	depends on I2C
208	help
209	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
210	  three step-down converters and two general-purpose LDO voltage regulators.
211	  It supports TI's software based Class-2 SmartReflex implementation.
212
213config REGULATOR_TPS6507X
214	tristate "TI TPS6507X Power regulators"
215	depends on I2C
216	help
217	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
218	  three step-down converters and two general-purpose LDO voltage regulators.
219	  It supports TI's software based Class-2 SmartReflex implementation.
220
221config REGULATOR_88PM8607
222	bool "Marvell 88PM8607 Power regulators"
223	depends on MFD_88PM860X=y
224	help
225	  This driver supports 88PM8607 voltage regulator chips.
226
227config REGULATOR_ISL6271A
228	tristate "Intersil ISL6271A Power regulator"
229	depends on I2C
230	help
231	  This driver supports ISL6271A voltage regulator chip.
232
233config REGULATOR_AD5398
234	tristate "Analog Devices AD5398/AD5821 regulators"
235	depends on I2C
236	help
237	  This driver supports AD5398 and AD5821 current regulator chips.
238	  If building into module, its name is ad5398.ko.
239
240config REGULATOR_AB8500
241	bool "ST-Ericsson AB8500 Power Regulators"
242	depends on AB8500_CORE
243	help
244	  This driver supports the regulators found on the ST-Ericsson mixed
245	  signal AB8500 PMIC
246
247config REGULATOR_TPS6586X
248	tristate "TI TPS6586X Power regulators"
249	depends on MFD_TPS6586X
250	help
251	  This driver supports TPS6586X voltage regulator chips.
252
253endif
254
255