1menuconfig REGULATOR 2 bool "Voltage and Current Regulator Support" 3 help 4 Generic Voltage and Current Regulator support. 5 6 This framework is designed to provide a generic interface to voltage 7 and current regulators within the Linux kernel. It's intended to 8 provide voltage and current control to client or consumer drivers and 9 also provide status information to user space applications through a 10 sysfs interface. 11 12 The intention is to allow systems to dynamically control regulator 13 output in order to save power and prolong battery life. This applies 14 to both voltage regulators (where voltage output is controllable) and 15 current sinks (where current output is controllable). 16 17 This framework safely compiles out if not selected so that client 18 drivers can still be used in systems with no software controllable 19 regulators. 20 21 If unsure, say no. 22 23 24if REGULATOR 25 26config REGULATOR_DEBUG 27 bool "Regulator debug support" 28 help 29 Say yes here to enable debugging support. 30 31config REGULATOR_FIXED_VOLTAGE 32 tristate "Fixed voltage regulator support" 33 help 34 This driver provides support for fixed voltage regulators, 35 useful for systems which use a combination of software 36 managed regulators and simple non-configurable regulators. 37 38config REGULATOR_VIRTUAL_CONSUMER 39 tristate "Virtual regulator consumer support" 40 help 41 This driver provides a virtual consumer for the voltage and 42 current regulator API which provides sysfs controls for 43 configuring the supplies requested. This is mainly useful 44 for test purposes. 45 46 If unsure, say no. 47 48config REGULATOR_USERSPACE_CONSUMER 49 tristate "Userspace regulator consumer support" 50 help 51 There are some classes of devices that are controlled entirely 52 from user space. Userspace consumer driver provides ability to 53 control power supplies for such devices. 54 55 If unsure, say no. 56 57config REGULATOR_88PM800 58 tristate "Marvell 88PM800 Power regulators" 59 depends on MFD_88PM800 60 help 61 This driver supports Marvell 88PM800 voltage regulator chips. 62 It delivers digitally programmable output, 63 the voltage is programmed via I2C interface. 64 It's suitable to support PXA988 chips to control VCC_MAIN and 65 various voltages. 66 67config REGULATOR_88PM8607 68 tristate "Marvell 88PM8607 Power regulators" 69 depends on MFD_88PM860X=y 70 help 71 This driver supports 88PM8607 voltage regulator chips. 72 73config REGULATOR_ACT8865 74 tristate "Active-semi act8865 voltage regulator" 75 depends on I2C 76 select REGMAP_I2C 77 help 78 This driver controls a active-semi act8865 voltage output 79 regulator via I2C bus. 80 81config REGULATOR_AD5398 82 tristate "Analog Devices AD5398/AD5821 regulators" 83 depends on I2C 84 help 85 This driver supports AD5398 and AD5821 current regulator chips. 86 If building into module, its name is ad5398.ko. 87 88config REGULATOR_ANATOP 89 tristate "Freescale i.MX on-chip ANATOP LDO regulators" 90 depends on MFD_SYSCON 91 help 92 Say y here to support Freescale i.MX on-chip ANATOP LDOs 93 regulators. It is recommended that this option be 94 enabled on i.MX6 platform. 95 96config REGULATOR_AAT2870 97 tristate "AnalogicTech AAT2870 Regulators" 98 depends on MFD_AAT2870_CORE 99 help 100 If you have a AnalogicTech AAT2870 say Y to enable the 101 regulator driver. 102 103config REGULATOR_AB3100 104 tristate "ST-Ericsson AB3100 Regulator functions" 105 depends on AB3100_CORE 106 default y if AB3100_CORE 107 help 108 These regulators correspond to functionality in the 109 AB3100 analog baseband dealing with power regulators 110 for the system. 111 112config REGULATOR_AB8500 113 bool "ST-Ericsson AB8500 Power Regulators" 114 depends on AB8500_CORE 115 help 116 This driver supports the regulators found on the ST-Ericsson mixed 117 signal AB8500 PMIC 118 119config REGULATOR_ARIZONA 120 tristate "Wolfson Arizona class devices" 121 depends on MFD_ARIZONA 122 depends on SND_SOC 123 help 124 Support for the regulators found on Wolfson Arizona class 125 devices. 126 127config REGULATOR_AS3711 128 tristate "AS3711 PMIC" 129 depends on MFD_AS3711 130 help 131 This driver provides support for the voltage regulators on the 132 AS3711 PMIC 133 134config REGULATOR_AS3722 135 tristate "AMS AS3722 PMIC Regulators" 136 depends on MFD_AS3722 137 help 138 This driver provides support for the voltage regulators on the 139 AS3722 PMIC. This will enable support for all the software 140 controllable DCDC/LDO regulators. 141 142config REGULATOR_DA903X 143 tristate "Dialog Semiconductor DA9030/DA9034 regulators" 144 depends on PMIC_DA903X 145 help 146 Say y here to support the BUCKs and LDOs regulators found on 147 Dialog Semiconductor DA9030/DA9034 PMIC. 148 149config REGULATOR_DA9052 150 tristate "Dialog Semiconductor DA9052/DA9053 regulators" 151 depends on PMIC_DA9052 152 help 153 This driver supports the voltage regulators of DA9052-BC and 154 DA9053-AA/Bx PMIC. 155 156config REGULATOR_DA9055 157 tristate "Dialog Semiconductor DA9055 regulators" 158 depends on MFD_DA9055 159 help 160 Say y here to support the BUCKs and LDOs regulators found on 161 Dialog Semiconductor DA9055 PMIC. 162 163 This driver can also be built as a module. If so, the module 164 will be called da9055-regulator. 165 166config REGULATOR_DA9063 167 tristate "Dialog Semiconductor DA9063 regulators" 168 depends on MFD_DA9063 169 help 170 Say y here to support the BUCKs and LDOs regulators found on 171 DA9063 PMICs. 172 173 This driver can also be built as a module. If so, the module 174 will be called da9063-regulator. 175 176config REGULATOR_DA9210 177 tristate "Dialog Semiconductor DA9210 regulator" 178 depends on I2C 179 select REGMAP_I2C 180 help 181 Say y here to support for the Dialog Semiconductor DA9210. 182 The DA9210 is a multi-phase synchronous step down 183 converter 12A DC-DC Buck controlled through an I2C 184 interface. 185 186config REGULATOR_DBX500_PRCMU 187 bool 188 189config REGULATOR_DB8500_PRCMU 190 bool "ST-Ericsson DB8500 Voltage Domain Regulators" 191 depends on MFD_DB8500_PRCMU 192 select REGULATOR_DBX500_PRCMU 193 help 194 This driver supports the voltage domain regulators controlled by the 195 DB8500 PRCMU 196 197config REGULATOR_FAN53555 198 tristate "Fairchild FAN53555 Regulator" 199 depends on I2C 200 select REGMAP_I2C 201 help 202 This driver supports Fairchild FAN53555 Digitally Programmable 203 TinyBuck Regulator. The FAN53555 is a step-down switching voltage 204 regulator that delivers a digitally programmable output from an 205 input voltage supply of 2.5V to 5.5V. The output voltage is 206 programmed through an I2C interface. 207 208config REGULATOR_GPIO 209 tristate "GPIO regulator support" 210 depends on GPIOLIB 211 help 212 This driver provides support for regulators that can be 213 controlled via gpios. 214 It is capable of supporting current and voltage regulators 215 and the platform has to provide a mapping of GPIO-states 216 to target volts/amps. 217 218config REGULATOR_ISL6271A 219 tristate "Intersil ISL6271A Power regulator" 220 depends on I2C 221 help 222 This driver supports ISL6271A voltage regulator chip. 223 224config REGULATOR_LP3971 225 tristate "National Semiconductors LP3971 PMIC regulator driver" 226 depends on I2C 227 help 228 Say Y here to support the voltage regulators and convertors 229 on National Semiconductors LP3971 PMIC 230 231config REGULATOR_LP3972 232 tristate "National Semiconductors LP3972 PMIC regulator driver" 233 depends on I2C 234 help 235 Say Y here to support the voltage regulators and convertors 236 on National Semiconductors LP3972 PMIC 237 238config REGULATOR_LP872X 239 tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" 240 depends on I2C 241 select REGMAP_I2C 242 help 243 This driver supports LP8720/LP8725 PMIC 244 245config REGULATOR_LP8755 246 tristate "TI LP8755 High Performance PMU driver" 247 depends on I2C 248 select REGMAP_I2C 249 help 250 This driver supports LP8755 High Performance PMU driver. This 251 chip contains six step-down DC/DC converters which can support 252 9 mode multiphase configuration. 253 254config REGULATOR_LP8788 255 tristate "TI LP8788 Power Regulators" 256 depends on MFD_LP8788 257 help 258 This driver supports LP8788 voltage regulator chip. 259 260config REGULATOR_MAX14577 261 tristate "Maxim 14577 regulator" 262 depends on MFD_MAX14577 263 help 264 This driver controls a Maxim 14577 regulator via I2C bus. 265 The regulators include safeout LDO and current regulator 'CHARGER'. 266 267config REGULATOR_MAX1586 268 tristate "Maxim 1586/1587 voltage regulator" 269 depends on I2C 270 help 271 This driver controls a Maxim 1586 or 1587 voltage output 272 regulator via I2C bus. The provided regulator is suitable 273 for PXA27x chips to control VCC_CORE and VCC_USIM voltages. 274 275config REGULATOR_MAX8649 276 tristate "Maxim 8649 voltage regulator" 277 depends on I2C 278 select REGMAP_I2C 279 help 280 This driver controls a Maxim 8649 voltage output regulator via 281 I2C bus. 282 283config REGULATOR_MAX8660 284 tristate "Maxim 8660/8661 voltage regulator" 285 depends on I2C 286 help 287 This driver controls a Maxim 8660/8661 voltage output 288 regulator via I2C bus. 289 290config REGULATOR_MAX8907 291 tristate "Maxim 8907 voltage regulator" 292 depends on MFD_MAX8907 293 help 294 This driver controls a Maxim 8907 voltage output regulator 295 via I2C bus. The provided regulator is suitable for Tegra 296 chip to control Step-Down DC-DC and LDOs. 297 298config REGULATOR_MAX8925 299 tristate "Maxim MAX8925 Power Management IC" 300 depends on MFD_MAX8925 301 help 302 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. 303 304config REGULATOR_MAX8952 305 tristate "Maxim MAX8952 Power Management IC" 306 depends on I2C 307 help 308 This driver controls a Maxim 8952 voltage output regulator 309 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS 310 modes ranging from 0.77V to 1.40V by 0.01V steps. 311 312config REGULATOR_MAX8973 313 tristate "Maxim MAX8973 voltage regulator " 314 depends on I2C 315 select REGMAP_I2C 316 help 317 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down 318 switching regulator delievers up to 9A of output current. Each 319 phase operates at a 2MHz fixed frequency with a 120 deg shift 320 from the adjacent phase, allowing the use of small magnetic component. 321 322config REGULATOR_MAX8997 323 tristate "Maxim 8997/8966 regulator" 324 depends on MFD_MAX8997 325 help 326 This driver controls a Maxim 8997/8966 regulator 327 via I2C bus. The provided regulator is suitable for S5PC110, 328 S5PV210, and Exynos-4 chips to control VCC_CORE and 329 VCC_USIM voltages. 330 331config REGULATOR_MAX8998 332 tristate "Maxim 8998 voltage regulator" 333 depends on MFD_MAX8998 334 help 335 This driver controls a Maxim 8998 voltage output regulator 336 via I2C bus. The provided regulator is suitable for S3C6410 337 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. 338 339config REGULATOR_MAX77686 340 tristate "Maxim 77686 regulator" 341 depends on MFD_MAX77686 342 help 343 This driver controls a Maxim 77686 regulator 344 via I2C bus. The provided regulator is suitable for 345 Exynos-4 chips to control VARM and VINT voltages. 346 347config REGULATOR_MAX77693 348 tristate "Maxim MAX77693 regulator" 349 depends on MFD_MAX77693 350 help 351 This driver controls a Maxim 77693 regulator via I2C bus. 352 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' 353 and one current regulator 'CHARGER'. This is suitable for 354 Exynos-4x12 chips. 355 356config REGULATOR_MC13XXX_CORE 357 tristate 358 359config REGULATOR_MC13783 360 tristate "Freescale MC13783 regulator driver" 361 depends on MFD_MC13XXX 362 select REGULATOR_MC13XXX_CORE 363 help 364 Say y here to support the regulators found on the Freescale MC13783 365 PMIC. 366 367config REGULATOR_MC13892 368 tristate "Freescale MC13892 regulator driver" 369 depends on MFD_MC13XXX 370 select REGULATOR_MC13XXX_CORE 371 help 372 Say y here to support the regulators found on the Freescale MC13892 373 PMIC. 374 375config REGULATOR_PALMAS 376 tristate "TI Palmas PMIC Regulators" 377 depends on MFD_PALMAS 378 help 379 If you wish to control the regulators on the Palmas series of 380 chips say Y here. This will enable support for all the software 381 controllable SMPS/LDO regulators. 382 383 The regulators available on Palmas series chips vary depending 384 on the muxing. This is handled automatically in the driver by 385 reading the mux info from OTP. 386 387config REGULATOR_PBIAS 388 tristate "PBIAS OMAP regulator driver" 389 depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON 390 help 391 Say y here to support pbias regulator for mmc1:SD card i/o 392 on OMAP SoCs. 393 This driver provides support for OMAP pbias modelled 394 regulators. 395 396config REGULATOR_PCAP 397 tristate "Motorola PCAP2 regulator driver" 398 depends on EZX_PCAP 399 help 400 This driver provides support for the voltage regulators of the 401 PCAP2 PMIC. 402 403config REGULATOR_PCF50633 404 tristate "NXP PCF50633 regulator driver" 405 depends on MFD_PCF50633 406 help 407 Say Y here to support the voltage regulators and convertors 408 on PCF50633 409 410config REGULATOR_PFUZE100 411 tristate "Freescale PFUZE100 regulator driver" 412 depends on I2C 413 select REGMAP_I2C 414 help 415 Say y here to support the regulators found on the Freescale PFUZE100 416 PMIC. 417 418config REGULATOR_RC5T583 419 tristate "RICOH RC5T583 Power regulators" 420 depends on MFD_RC5T583 421 help 422 Select this option to enable the power regulator of RICOH 423 PMIC RC5T583. 424 This driver supports the control of different power rails of device 425 through regulator interface. The device supports multiple DCDC/LDO 426 outputs which can be controlled by i2c communication. 427 428config REGULATOR_S2MPS11 429 tristate "Samsung S2MPS11 voltage regulator" 430 depends on MFD_SEC_CORE 431 help 432 This driver supports a Samsung S2MPS11 voltage output regulator 433 via I2C bus. S2MPS11 is comprised of high efficient Buck converters 434 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. 435 436config REGULATOR_S5M8767 437 tristate "Samsung S5M8767A voltage regulator" 438 depends on MFD_SEC_CORE 439 help 440 This driver supports a Samsung S5M8767A voltage output regulator 441 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and 442 supports DVS mode with 8bits of output voltage control. 443 444config REGULATOR_TI_ABB 445 tristate "TI Adaptive Body Bias on-chip LDO" 446 depends on ARCH_OMAP 447 help 448 Select this option to support Texas Instruments' on-chip Adaptive Body 449 Bias (ABB) LDO regulators. It is recommended that this option be 450 enabled on required TI SoC. Certain Operating Performance Points 451 on TI SoCs may be unstable without enabling this as it provides 452 device specific optimized bias to allow/optimize functionality. 453 454config REGULATOR_STW481X_VMMC 455 bool "ST Microelectronics STW481X VMMC regulator" 456 depends on MFD_STW481X 457 default y if MFD_STW481X 458 help 459 This driver supports the internal VMMC regulator in the STw481x 460 PMIC chips. 461 462config REGULATOR_TPS51632 463 tristate "TI TPS51632 Power Regulator" 464 depends on I2C 465 select REGMAP_I2C 466 help 467 This driver supports TPS51632 voltage regulator chip. 468 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller 469 with Serial VID control and DVFS. 470 The voltage output can be configure through I2C interface or PWM 471 interface. 472 473config REGULATOR_TPS6105X 474 tristate "TI TPS6105X Power regulators" 475 depends on TPS6105X 476 default y if TPS6105X 477 help 478 This driver supports TPS61050/TPS61052 voltage regulator chips. 479 It is a single boost converter primarily for white LEDs and 480 audio amplifiers. 481 482config REGULATOR_TPS62360 483 tristate "TI TPS6236x Power Regulator" 484 depends on I2C 485 select REGMAP_I2C 486 help 487 This driver supports TPS6236x voltage regulator chip. This 488 regulator is meant for processor core supply. This chip is 489 high-frequency synchronous step down dc-dc converter optimized 490 for battery-powered portable applications. 491 492config REGULATOR_TPS65023 493 tristate "TI TPS65023 Power regulators" 494 depends on I2C 495 select REGMAP_I2C 496 help 497 This driver supports TPS65023 voltage regulator chips. TPS65023 provides 498 three step-down converters and two general-purpose LDO voltage regulators. 499 It supports TI's software based Class-2 SmartReflex implementation. 500 501config REGULATOR_TPS6507X 502 tristate "TI TPS6507X Power regulators" 503 depends on I2C 504 help 505 This driver supports TPS6507X voltage regulator chips. TPS6507X provides 506 three step-down converters and two general-purpose LDO voltage regulators. 507 It supports TI's software based Class-2 SmartReflex implementation. 508 509config REGULATOR_TPS65090 510 tristate "TI TPS65090 Power regulator" 511 depends on MFD_TPS65090 512 help 513 This driver provides support for the voltage regulators on the 514 TI TPS65090 PMIC. 515 516config REGULATOR_TPS65217 517 tristate "TI TPS65217 Power regulators" 518 depends on MFD_TPS65217 519 help 520 This driver supports TPS65217 voltage regulator chips. TPS65217 521 provides three step-down converters and four general-purpose LDO 522 voltage regulators. It supports software based voltage control 523 for different voltage domains 524 525config REGULATOR_TPS6524X 526 tristate "TI TPS6524X Power regulators" 527 depends on SPI 528 help 529 This driver supports TPS6524X voltage regulator chips. TPS6524X 530 provides three step-down converters and two general-purpose LDO 531 voltage regulators. This device is interfaced using a customized 532 serial interface currently supported on the sequencer serial 533 port controller. 534 535config REGULATOR_TPS6586X 536 tristate "TI TPS6586X Power regulators" 537 depends on MFD_TPS6586X 538 help 539 This driver supports TPS6586X voltage regulator chips. 540 541config REGULATOR_TPS65910 542 tristate "TI TPS65910/TPS65911 Power Regulators" 543 depends on MFD_TPS65910 544 help 545 This driver supports TPS65910/TPS65911 voltage regulator chips. 546 547config REGULATOR_TPS65912 548 tristate "TI TPS65912 Power regulator" 549 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) 550 help 551 This driver supports TPS65912 voltage regulator chip. 552 553config REGULATOR_TPS80031 554 tristate "TI TPS80031/TPS80032 power regualtor driver" 555 depends on MFD_TPS80031 556 help 557 TPS80031/ TPS80032 Fully Integrated Power Management with Power 558 Path and Battery Charger. It has 5 configurable step-down 559 converters, 11 general purpose LDOs, VBUS generator and digital 560 output to control regulators. 561 562config REGULATOR_TWL4030 563 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" 564 depends on TWL4030_CORE 565 help 566 This driver supports the voltage regulators provided by 567 this family of companion chips. 568 569config REGULATOR_VEXPRESS 570 tristate "Versatile Express regulators" 571 depends on VEXPRESS_CONFIG 572 help 573 This driver provides support for voltage regulators available 574 on the ARM Ltd's Versatile Express platform. 575 576config REGULATOR_WM831X 577 tristate "Wolfson Microelectronics WM831x PMIC regulators" 578 depends on MFD_WM831X 579 help 580 Support the voltage and current regulators of the WM831x series 581 of PMIC devices. 582 583config REGULATOR_WM8350 584 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" 585 depends on MFD_WM8350 586 help 587 This driver provides support for the voltage and current regulators 588 of the WM8350 AudioPlus PMIC. 589 590config REGULATOR_WM8400 591 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" 592 depends on MFD_WM8400 593 help 594 This driver provides support for the voltage regulators of the 595 WM8400 AudioPlus PMIC. 596 597config REGULATOR_WM8994 598 tristate "Wolfson Microelectronics WM8994 CODEC" 599 depends on MFD_WM8994 600 help 601 This driver provides support for the voltage regulators on the 602 WM8994 CODEC. 603 604endif 605 606