1 /* 2 * IDT CPS Gen.2 Serial RapidIO switch family support 3 * 4 * Copyright 2010 Integrated Device Technology, Inc. 5 * Alexandre Bounine <alexandre.bounine@idt.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or (at your 10 * option) any later version. 11 */ 12 13 #include <linux/stat.h> 14 #include <linux/module.h> 15 #include <linux/rio.h> 16 #include <linux/rio_drv.h> 17 #include <linux/rio_ids.h> 18 #include <linux/delay.h> 19 20 #include <asm/page.h> 21 #include "../rio.h" 22 23 #define LOCAL_RTE_CONF_DESTID_SEL 0x010070 24 #define LOCAL_RTE_CONF_DESTID_SEL_PSEL 0x0000001f 25 26 #define IDT_LT_ERR_REPORT_EN 0x03100c 27 28 #define IDT_PORT_ERR_REPORT_EN(n) (0x031044 + (n)*0x40) 29 #define IDT_PORT_ERR_REPORT_EN_BC 0x03ff04 30 31 #define IDT_PORT_ISERR_REPORT_EN(n) (0x03104C + (n)*0x40) 32 #define IDT_PORT_ISERR_REPORT_EN_BC 0x03ff0c 33 #define IDT_PORT_INIT_TX_ACQUIRED 0x00000020 34 35 #define IDT_LANE_ERR_REPORT_EN(n) (0x038010 + (n)*0x100) 36 #define IDT_LANE_ERR_REPORT_EN_BC 0x03ff10 37 38 #define IDT_DEV_CTRL_1 0xf2000c 39 #define IDT_DEV_CTRL_1_GENPW 0x02000000 40 #define IDT_DEV_CTRL_1_PRSTBEH 0x00000001 41 42 #define IDT_CFGBLK_ERR_CAPTURE_EN 0x020008 43 #define IDT_CFGBLK_ERR_REPORT 0xf20014 44 #define IDT_CFGBLK_ERR_REPORT_GENPW 0x00000002 45 46 #define IDT_AUX_PORT_ERR_CAP_EN 0x020000 47 #define IDT_AUX_ERR_REPORT_EN 0xf20018 48 #define IDT_AUX_PORT_ERR_LOG_I2C 0x00000002 49 #define IDT_AUX_PORT_ERR_LOG_JTAG 0x00000001 50 51 #define IDT_ISLTL_ADDRESS_CAP 0x021014 52 53 #define IDT_RIO_DOMAIN 0xf20020 54 #define IDT_RIO_DOMAIN_MASK 0x000000ff 55 56 #define IDT_PW_INFO_CSR 0xf20024 57 58 #define IDT_SOFT_RESET 0xf20040 59 #define IDT_SOFT_RESET_REQ 0x00030097 60 61 #define IDT_I2C_MCTRL 0xf20050 62 #define IDT_I2C_MCTRL_GENPW 0x04000000 63 64 #define IDT_JTAG_CTRL 0xf2005c 65 #define IDT_JTAG_CTRL_GENPW 0x00000002 66 67 #define IDT_LANE_CTRL(n) (0xff8000 + (n)*0x100) 68 #define IDT_LANE_CTRL_BC 0xffff00 69 #define IDT_LANE_CTRL_GENPW 0x00200000 70 #define IDT_LANE_DFE_1_BC 0xffff18 71 #define IDT_LANE_DFE_2_BC 0xffff1c 72 73 #define IDT_PORT_OPS(n) (0xf40004 + (n)*0x100) 74 #define IDT_PORT_OPS_GENPW 0x08000000 75 #define IDT_PORT_OPS_PL_ELOG 0x00000040 76 #define IDT_PORT_OPS_LL_ELOG 0x00000020 77 #define IDT_PORT_OPS_LT_ELOG 0x00000010 78 #define IDT_PORT_OPS_BC 0xf4ff04 79 80 #define IDT_PORT_ISERR_DET(n) (0xf40008 + (n)*0x100) 81 82 #define IDT_ERR_CAP 0xfd0000 83 #define IDT_ERR_CAP_LOG_OVERWR 0x00000004 84 85 #define IDT_ERR_RD 0xfd0004 86 87 #define IDT_DEFAULT_ROUTE 0xde 88 #define IDT_NO_ROUTE 0xdf 89 90 static int 91 idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, 92 u16 table, u16 route_destid, u8 route_port) 93 { 94 /* 95 * Select routing table to update 96 */ 97 if (table == RIO_GLOBAL_TABLE) 98 table = 0; 99 else 100 table++; 101 102 if (route_port == RIO_INVALID_ROUTE) 103 route_port = IDT_DEFAULT_ROUTE; 104 105 rio_mport_write_config_32(mport, destid, hopcount, 106 LOCAL_RTE_CONF_DESTID_SEL, table); 107 108 /* 109 * Program destination port for the specified destID 110 */ 111 rio_mport_write_config_32(mport, destid, hopcount, 112 RIO_STD_RTE_CONF_DESTID_SEL_CSR, 113 (u32)route_destid); 114 115 rio_mport_write_config_32(mport, destid, hopcount, 116 RIO_STD_RTE_CONF_PORT_SEL_CSR, 117 (u32)route_port); 118 udelay(10); 119 120 return 0; 121 } 122 123 static int 124 idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, 125 u16 table, u16 route_destid, u8 *route_port) 126 { 127 u32 result; 128 129 /* 130 * Select routing table to read 131 */ 132 if (table == RIO_GLOBAL_TABLE) 133 table = 0; 134 else 135 table++; 136 137 rio_mport_write_config_32(mport, destid, hopcount, 138 LOCAL_RTE_CONF_DESTID_SEL, table); 139 140 rio_mport_write_config_32(mport, destid, hopcount, 141 RIO_STD_RTE_CONF_DESTID_SEL_CSR, 142 route_destid); 143 144 rio_mport_read_config_32(mport, destid, hopcount, 145 RIO_STD_RTE_CONF_PORT_SEL_CSR, &result); 146 147 if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result) 148 *route_port = RIO_INVALID_ROUTE; 149 else 150 *route_port = (u8)result; 151 152 return 0; 153 } 154 155 static int 156 idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, 157 u16 table) 158 { 159 u32 i; 160 161 /* 162 * Select routing table to read 163 */ 164 if (table == RIO_GLOBAL_TABLE) 165 table = 0; 166 else 167 table++; 168 169 rio_mport_write_config_32(mport, destid, hopcount, 170 LOCAL_RTE_CONF_DESTID_SEL, table); 171 172 for (i = RIO_STD_RTE_CONF_EXTCFGEN; 173 i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) { 174 rio_mport_write_config_32(mport, destid, hopcount, 175 RIO_STD_RTE_CONF_DESTID_SEL_CSR, i); 176 rio_mport_write_config_32(mport, destid, hopcount, 177 RIO_STD_RTE_CONF_PORT_SEL_CSR, 178 (IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) | 179 (IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE); 180 i += 4; 181 } 182 183 return 0; 184 } 185 186 187 static int 188 idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount, 189 u8 sw_domain) 190 { 191 /* 192 * Switch domain configuration operates only at global level 193 */ 194 rio_mport_write_config_32(mport, destid, hopcount, 195 IDT_RIO_DOMAIN, (u32)sw_domain); 196 return 0; 197 } 198 199 static int 200 idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount, 201 u8 *sw_domain) 202 { 203 u32 regval; 204 205 /* 206 * Switch domain configuration operates only at global level 207 */ 208 rio_mport_read_config_32(mport, destid, hopcount, 209 IDT_RIO_DOMAIN, ®val); 210 211 *sw_domain = (u8)(regval & 0xff); 212 213 return 0; 214 } 215 216 static int 217 idtg2_em_init(struct rio_dev *rdev) 218 { 219 u32 regval; 220 int i, tmp; 221 222 /* 223 * This routine performs device-specific initialization only. 224 * All standard EM configuration should be performed at upper level. 225 */ 226 227 pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount); 228 229 /* Set Port-Write info CSR: PRIO=3 and CRF=1 */ 230 rio_write_config_32(rdev, IDT_PW_INFO_CSR, 0x0000e000); 231 232 /* 233 * Configure LT LAYER error reporting. 234 */ 235 236 /* Enable standard (RIO.p8) error reporting */ 237 rio_write_config_32(rdev, IDT_LT_ERR_REPORT_EN, 238 REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR | 239 REM_LTL_ERR_UNSUPTR); 240 241 /* Use Port-Writes for LT layer error reporting. 242 * Enable per-port reset 243 */ 244 rio_read_config_32(rdev, IDT_DEV_CTRL_1, ®val); 245 rio_write_config_32(rdev, IDT_DEV_CTRL_1, 246 regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH); 247 248 /* 249 * Configure PORT error reporting. 250 */ 251 252 /* Report all RIO.p8 errors supported by device */ 253 rio_write_config_32(rdev, IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037); 254 255 /* Configure reporting of implementation specific errors/events */ 256 rio_write_config_32(rdev, IDT_PORT_ISERR_REPORT_EN_BC, 257 IDT_PORT_INIT_TX_ACQUIRED); 258 259 /* Use Port-Writes for port error reporting and enable error logging */ 260 tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo); 261 for (i = 0; i < tmp; i++) { 262 rio_read_config_32(rdev, IDT_PORT_OPS(i), ®val); 263 rio_write_config_32(rdev, 264 IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW | 265 IDT_PORT_OPS_PL_ELOG | 266 IDT_PORT_OPS_LL_ELOG | 267 IDT_PORT_OPS_LT_ELOG); 268 } 269 /* Overwrite error log if full */ 270 rio_write_config_32(rdev, IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR); 271 272 /* 273 * Configure LANE error reporting. 274 */ 275 276 /* Disable line error reporting */ 277 rio_write_config_32(rdev, IDT_LANE_ERR_REPORT_EN_BC, 0); 278 279 /* Use Port-Writes for lane error reporting (when enabled) 280 * (do per-lane update because lanes may have different configuration) 281 */ 282 tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16; 283 for (i = 0; i < tmp; i++) { 284 rio_read_config_32(rdev, IDT_LANE_CTRL(i), ®val); 285 rio_write_config_32(rdev, IDT_LANE_CTRL(i), 286 regval | IDT_LANE_CTRL_GENPW); 287 } 288 289 /* 290 * Configure AUX error reporting. 291 */ 292 293 /* Disable JTAG and I2C Error capture */ 294 rio_write_config_32(rdev, IDT_AUX_PORT_ERR_CAP_EN, 0); 295 296 /* Disable JTAG and I2C Error reporting/logging */ 297 rio_write_config_32(rdev, IDT_AUX_ERR_REPORT_EN, 0); 298 299 /* Disable Port-Write notification from JTAG */ 300 rio_write_config_32(rdev, IDT_JTAG_CTRL, 0); 301 302 /* Disable Port-Write notification from I2C */ 303 rio_read_config_32(rdev, IDT_I2C_MCTRL, ®val); 304 rio_write_config_32(rdev, IDT_I2C_MCTRL, regval & ~IDT_I2C_MCTRL_GENPW); 305 306 /* 307 * Configure CFG_BLK error reporting. 308 */ 309 310 /* Disable Configuration Block error capture */ 311 rio_write_config_32(rdev, IDT_CFGBLK_ERR_CAPTURE_EN, 0); 312 313 /* Disable Port-Writes for Configuration Block error reporting */ 314 rio_read_config_32(rdev, IDT_CFGBLK_ERR_REPORT, ®val); 315 rio_write_config_32(rdev, IDT_CFGBLK_ERR_REPORT, 316 regval & ~IDT_CFGBLK_ERR_REPORT_GENPW); 317 318 /* set TVAL = ~50us */ 319 rio_write_config_32(rdev, 320 rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8); 321 322 return 0; 323 } 324 325 static int 326 idtg2_em_handler(struct rio_dev *rdev, u8 portnum) 327 { 328 u32 regval, em_perrdet, em_ltlerrdet; 329 330 rio_read_config_32(rdev, 331 rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet); 332 if (em_ltlerrdet) { 333 /* Service Logical/Transport Layer Error(s) */ 334 if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) { 335 /* Implementation specific error reported */ 336 rio_read_config_32(rdev, 337 IDT_ISLTL_ADDRESS_CAP, ®val); 338 339 pr_debug("RIO: %s Implementation Specific LTL errors" \ 340 " 0x%x @(0x%x)\n", 341 rio_name(rdev), em_ltlerrdet, regval); 342 343 /* Clear implementation specific address capture CSR */ 344 rio_write_config_32(rdev, IDT_ISLTL_ADDRESS_CAP, 0); 345 346 } 347 } 348 349 rio_read_config_32(rdev, 350 rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet); 351 if (em_perrdet) { 352 /* Service Port-Level Error(s) */ 353 if (em_perrdet & REM_PED_IMPL_SPEC) { 354 /* Implementation Specific port error reported */ 355 356 /* Get IS errors reported */ 357 rio_read_config_32(rdev, 358 IDT_PORT_ISERR_DET(portnum), ®val); 359 360 pr_debug("RIO: %s Implementation Specific Port" \ 361 " errors 0x%x\n", rio_name(rdev), regval); 362 363 /* Clear all implementation specific events */ 364 rio_write_config_32(rdev, 365 IDT_PORT_ISERR_DET(portnum), 0); 366 } 367 } 368 369 return 0; 370 } 371 372 static ssize_t 373 idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf) 374 { 375 struct rio_dev *rdev = to_rio_dev(dev); 376 ssize_t len = 0; 377 u32 regval; 378 379 while (!rio_read_config_32(rdev, IDT_ERR_RD, ®val)) { 380 if (!regval) /* 0 = end of log */ 381 break; 382 len += snprintf(buf + len, PAGE_SIZE - len, 383 "%08x\n", regval); 384 if (len >= (PAGE_SIZE - 10)) 385 break; 386 } 387 388 return len; 389 } 390 391 static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL); 392 393 static int idtg2_sysfs(struct rio_dev *rdev, bool create) 394 { 395 struct device *dev = &rdev->dev; 396 int err = 0; 397 398 if (create) { 399 /* Initialize sysfs entries */ 400 err = device_create_file(dev, &dev_attr_errlog); 401 if (err) 402 dev_err(dev, "Unable create sysfs errlog file\n"); 403 } else 404 device_remove_file(dev, &dev_attr_errlog); 405 406 return err; 407 } 408 409 static struct rio_switch_ops idtg2_switch_ops = { 410 .owner = THIS_MODULE, 411 .add_entry = idtg2_route_add_entry, 412 .get_entry = idtg2_route_get_entry, 413 .clr_table = idtg2_route_clr_table, 414 .set_domain = idtg2_set_domain, 415 .get_domain = idtg2_get_domain, 416 .em_init = idtg2_em_init, 417 .em_handle = idtg2_em_handler, 418 }; 419 420 static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id) 421 { 422 pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); 423 424 spin_lock(&rdev->rswitch->lock); 425 426 if (rdev->rswitch->ops) { 427 spin_unlock(&rdev->rswitch->lock); 428 return -EINVAL; 429 } 430 431 rdev->rswitch->ops = &idtg2_switch_ops; 432 433 if (rdev->do_enum) { 434 /* Ensure that default routing is disabled on startup */ 435 rio_write_config_32(rdev, 436 RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE); 437 } 438 439 /* Create device-specific sysfs attributes */ 440 idtg2_sysfs(rdev, true); 441 442 spin_unlock(&rdev->rswitch->lock); 443 return 0; 444 } 445 446 static void idtg2_remove(struct rio_dev *rdev) 447 { 448 pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); 449 spin_lock(&rdev->rswitch->lock); 450 if (rdev->rswitch->ops != &idtg2_switch_ops) { 451 spin_unlock(&rdev->rswitch->lock); 452 return; 453 } 454 rdev->rswitch->ops = NULL; 455 456 /* Remove device-specific sysfs attributes */ 457 idtg2_sysfs(rdev, false); 458 459 spin_unlock(&rdev->rswitch->lock); 460 } 461 462 static struct rio_device_id idtg2_id_table[] = { 463 {RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)}, 464 {RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)}, 465 {RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)}, 466 {RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)}, 467 {RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)}, 468 { 0, } /* terminate list */ 469 }; 470 471 static struct rio_driver idtg2_driver = { 472 .name = "idt_gen2", 473 .id_table = idtg2_id_table, 474 .probe = idtg2_probe, 475 .remove = idtg2_remove, 476 }; 477 478 static int __init idtg2_init(void) 479 { 480 return rio_register_driver(&idtg2_driver); 481 } 482 483 static void __exit idtg2_exit(void) 484 { 485 pr_debug("RIO: %s\n", __func__); 486 rio_unregister_driver(&idtg2_driver); 487 pr_debug("RIO: %s done\n", __func__); 488 } 489 490 device_initcall(idtg2_init); 491 module_exit(idtg2_exit); 492 493 MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver"); 494 MODULE_AUTHOR("Integrated Device Technology, Inc."); 495 MODULE_LICENSE("GPL"); 496