xref: /openbmc/linux/drivers/rapidio/rio-scan.c (revision 0883c2c0)
1 /*
2  * RapidIO enumeration and discovery support
3  *
4  * Copyright 2005 MontaVista Software, Inc.
5  * Matt Porter <mporter@kernel.crashing.org>
6  *
7  * Copyright 2009 Integrated Device Technology, Inc.
8  * Alex Bounine <alexandre.bounine@idt.com>
9  * - Added Port-Write/Error Management initialization and handling
10  *
11  * Copyright 2009 Sysgo AG
12  * Thomas Moll <thomas.moll@sysgo.com>
13  * - Added Input- Output- enable functionality, to allow full communication
14  *
15  * This program is free software; you can redistribute  it and/or modify it
16  * under  the terms of  the GNU General  Public License as published by the
17  * Free Software Foundation;  either version 2 of the  License, or (at your
18  * option) any later version.
19  */
20 
21 #include <linux/types.h>
22 #include <linux/kernel.h>
23 
24 #include <linux/delay.h>
25 #include <linux/dma-mapping.h>
26 #include <linux/init.h>
27 #include <linux/rio.h>
28 #include <linux/rio_drv.h>
29 #include <linux/rio_ids.h>
30 #include <linux/rio_regs.h>
31 #include <linux/module.h>
32 #include <linux/spinlock.h>
33 #include <linux/timer.h>
34 #include <linux/sched.h>
35 #include <linux/jiffies.h>
36 #include <linux/slab.h>
37 
38 #include "rio.h"
39 
40 static void rio_init_em(struct rio_dev *rdev);
41 
42 struct rio_id_table {
43 	u16 start;	/* logical minimal id */
44 	u32 max;	/* max number of IDs in table */
45 	spinlock_t lock;
46 	unsigned long table[0];
47 };
48 
49 static int next_destid = 0;
50 static int next_comptag = 1;
51 
52 static int rio_mport_phys_table[] = {
53 	RIO_EFB_PAR_EP_ID,
54 	RIO_EFB_PAR_EP_REC_ID,
55 	RIO_EFB_SER_EP_ID,
56 	RIO_EFB_SER_EP_REC_ID,
57 	-1,
58 };
59 
60 
61 /**
62  * rio_destid_alloc - Allocate next available destID for given network
63  * @net: RIO network
64  *
65  * Returns next available device destination ID for the specified RIO network.
66  * Marks allocated ID as one in use.
67  * Returns RIO_INVALID_DESTID if new destID is not available.
68  */
69 static u16 rio_destid_alloc(struct rio_net *net)
70 {
71 	int destid;
72 	struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
73 
74 	spin_lock(&idtab->lock);
75 	destid = find_first_zero_bit(idtab->table, idtab->max);
76 
77 	if (destid < idtab->max) {
78 		set_bit(destid, idtab->table);
79 		destid += idtab->start;
80 	} else
81 		destid = RIO_INVALID_DESTID;
82 
83 	spin_unlock(&idtab->lock);
84 	return (u16)destid;
85 }
86 
87 /**
88  * rio_destid_reserve - Reserve the specivied destID
89  * @net: RIO network
90  * @destid: destID to reserve
91  *
92  * Tries to reserve the specified destID.
93  * Returns 0 if successful.
94  */
95 static int rio_destid_reserve(struct rio_net *net, u16 destid)
96 {
97 	int oldbit;
98 	struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
99 
100 	destid -= idtab->start;
101 	spin_lock(&idtab->lock);
102 	oldbit = test_and_set_bit(destid, idtab->table);
103 	spin_unlock(&idtab->lock);
104 	return oldbit;
105 }
106 
107 /**
108  * rio_destid_free - free a previously allocated destID
109  * @net: RIO network
110  * @destid: destID to free
111  *
112  * Makes the specified destID available for use.
113  */
114 static void rio_destid_free(struct rio_net *net, u16 destid)
115 {
116 	struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
117 
118 	destid -= idtab->start;
119 	spin_lock(&idtab->lock);
120 	clear_bit(destid, idtab->table);
121 	spin_unlock(&idtab->lock);
122 }
123 
124 /**
125  * rio_destid_first - return first destID in use
126  * @net: RIO network
127  */
128 static u16 rio_destid_first(struct rio_net *net)
129 {
130 	int destid;
131 	struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
132 
133 	spin_lock(&idtab->lock);
134 	destid = find_first_bit(idtab->table, idtab->max);
135 	if (destid >= idtab->max)
136 		destid = RIO_INVALID_DESTID;
137 	else
138 		destid += idtab->start;
139 	spin_unlock(&idtab->lock);
140 	return (u16)destid;
141 }
142 
143 /**
144  * rio_destid_next - return next destID in use
145  * @net: RIO network
146  * @from: destination ID from which search shall continue
147  */
148 static u16 rio_destid_next(struct rio_net *net, u16 from)
149 {
150 	int destid;
151 	struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
152 
153 	spin_lock(&idtab->lock);
154 	destid = find_next_bit(idtab->table, idtab->max, from);
155 	if (destid >= idtab->max)
156 		destid = RIO_INVALID_DESTID;
157 	else
158 		destid += idtab->start;
159 	spin_unlock(&idtab->lock);
160 	return (u16)destid;
161 }
162 
163 /**
164  * rio_get_device_id - Get the base/extended device id for a device
165  * @port: RIO master port
166  * @destid: Destination ID of device
167  * @hopcount: Hopcount to device
168  *
169  * Reads the base/extended device id from a device. Returns the
170  * 8/16-bit device ID.
171  */
172 static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
173 {
174 	u32 result;
175 
176 	rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
177 
178 	return RIO_GET_DID(port->sys_size, result);
179 }
180 
181 /**
182  * rio_set_device_id - Set the base/extended device id for a device
183  * @port: RIO master port
184  * @destid: Destination ID of device
185  * @hopcount: Hopcount to device
186  * @did: Device ID value to be written
187  *
188  * Writes the base/extended device id from a device.
189  */
190 static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
191 {
192 	rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
193 				  RIO_SET_DID(port->sys_size, did));
194 }
195 
196 /**
197  * rio_clear_locks- Release all host locks and signal enumeration complete
198  * @net: RIO network to run on
199  *
200  * Marks the component tag CSR on each device with the enumeration
201  * complete flag. When complete, it then release the host locks on
202  * each device. Returns 0 on success or %-EINVAL on failure.
203  */
204 static int rio_clear_locks(struct rio_net *net)
205 {
206 	struct rio_mport *port = net->hport;
207 	struct rio_dev *rdev;
208 	u32 result;
209 	int ret = 0;
210 
211 	/* Release host device id locks */
212 	rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
213 				  port->host_deviceid);
214 	rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
215 	if ((result & 0xffff) != 0xffff) {
216 		printk(KERN_INFO
217 		       "RIO: badness when releasing host lock on master port, result %8.8x\n",
218 		       result);
219 		ret = -EINVAL;
220 	}
221 	list_for_each_entry(rdev, &net->devices, net_list) {
222 		rio_write_config_32(rdev, RIO_HOST_DID_LOCK_CSR,
223 				    port->host_deviceid);
224 		rio_read_config_32(rdev, RIO_HOST_DID_LOCK_CSR, &result);
225 		if ((result & 0xffff) != 0xffff) {
226 			printk(KERN_INFO
227 			       "RIO: badness when releasing host lock on vid %4.4x did %4.4x\n",
228 			       rdev->vid, rdev->did);
229 			ret = -EINVAL;
230 		}
231 
232 		/* Mark device as discovered and enable master */
233 		rio_read_config_32(rdev,
234 				   rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
235 				   &result);
236 		result |= RIO_PORT_GEN_DISCOVERED | RIO_PORT_GEN_MASTER;
237 		rio_write_config_32(rdev,
238 				    rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
239 				    result);
240 	}
241 
242 	return ret;
243 }
244 
245 /**
246  * rio_enum_host- Set host lock and initialize host destination ID
247  * @port: Master port to issue transaction
248  *
249  * Sets the local host master port lock and destination ID register
250  * with the host device ID value. The host device ID value is provided
251  * by the platform. Returns %0 on success or %-1 on failure.
252  */
253 static int rio_enum_host(struct rio_mport *port)
254 {
255 	u32 result;
256 
257 	/* Set master port host device id lock */
258 	rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
259 				  port->host_deviceid);
260 
261 	rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
262 	if ((result & 0xffff) != port->host_deviceid)
263 		return -1;
264 
265 	/* Set master port destid and init destid ctr */
266 	rio_local_set_device_id(port, port->host_deviceid);
267 	return 0;
268 }
269 
270 /**
271  * rio_device_has_destid- Test if a device contains a destination ID register
272  * @port: Master port to issue transaction
273  * @src_ops: RIO device source operations
274  * @dst_ops: RIO device destination operations
275  *
276  * Checks the provided @src_ops and @dst_ops for the necessary transaction
277  * capabilities that indicate whether or not a device will implement a
278  * destination ID register. Returns 1 if true or 0 if false.
279  */
280 static int rio_device_has_destid(struct rio_mport *port, int src_ops,
281 				 int dst_ops)
282 {
283 	u32 mask = RIO_OPS_READ | RIO_OPS_WRITE | RIO_OPS_ATOMIC_TST_SWP | RIO_OPS_ATOMIC_INC | RIO_OPS_ATOMIC_DEC | RIO_OPS_ATOMIC_SET | RIO_OPS_ATOMIC_CLR;
284 
285 	return !!((src_ops | dst_ops) & mask);
286 }
287 
288 /**
289  * rio_release_dev- Frees a RIO device struct
290  * @dev: LDM device associated with a RIO device struct
291  *
292  * Gets the RIO device struct associated a RIO device struct.
293  * The RIO device struct is freed.
294  */
295 static void rio_release_dev(struct device *dev)
296 {
297 	struct rio_dev *rdev;
298 
299 	rdev = to_rio_dev(dev);
300 	kfree(rdev);
301 }
302 
303 /**
304  * rio_is_switch- Tests if a RIO device has switch capabilities
305  * @rdev: RIO device
306  *
307  * Gets the RIO device Processing Element Features register
308  * contents and tests for switch capabilities. Returns 1 if
309  * the device is a switch or 0 if it is not a switch.
310  * The RIO device struct is freed.
311  */
312 static int rio_is_switch(struct rio_dev *rdev)
313 {
314 	if (rdev->pef & RIO_PEF_SWITCH)
315 		return 1;
316 	return 0;
317 }
318 
319 /**
320  * rio_setup_device- Allocates and sets up a RIO device
321  * @net: RIO network
322  * @port: Master port to send transactions
323  * @destid: Current destination ID
324  * @hopcount: Current hopcount
325  * @do_enum: Enumeration/Discovery mode flag
326  *
327  * Allocates a RIO device and configures fields based on configuration
328  * space contents. If device has a destination ID register, a destination
329  * ID is either assigned in enumeration mode or read from configuration
330  * space in discovery mode.  If the device has switch capabilities, then
331  * a switch is allocated and configured appropriately. Returns a pointer
332  * to a RIO device on success or NULL on failure.
333  *
334  */
335 static struct rio_dev *rio_setup_device(struct rio_net *net,
336 					struct rio_mport *port, u16 destid,
337 					u8 hopcount, int do_enum)
338 {
339 	int ret = 0;
340 	struct rio_dev *rdev;
341 	struct rio_switch *rswitch = NULL;
342 	int result, rdid;
343 	size_t size;
344 	u32 swpinfo = 0;
345 
346 	size = sizeof(struct rio_dev);
347 	if (rio_mport_read_config_32(port, destid, hopcount,
348 				     RIO_PEF_CAR, &result))
349 		return NULL;
350 
351 	if (result & (RIO_PEF_SWITCH | RIO_PEF_MULTIPORT)) {
352 		rio_mport_read_config_32(port, destid, hopcount,
353 					 RIO_SWP_INFO_CAR, &swpinfo);
354 		if (result & RIO_PEF_SWITCH) {
355 			size += (RIO_GET_TOTAL_PORTS(swpinfo) *
356 				sizeof(rswitch->nextdev[0])) + sizeof(*rswitch);
357 		}
358 	}
359 
360 	rdev = kzalloc(size, GFP_KERNEL);
361 	if (!rdev)
362 		return NULL;
363 
364 	rdev->net = net;
365 	rdev->pef = result;
366 	rdev->swpinfo = swpinfo;
367 	rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_ID_CAR,
368 				 &result);
369 	rdev->did = result >> 16;
370 	rdev->vid = result & 0xffff;
371 	rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_INFO_CAR,
372 				 &rdev->device_rev);
373 	rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_ID_CAR,
374 				 &result);
375 	rdev->asm_did = result >> 16;
376 	rdev->asm_vid = result & 0xffff;
377 	rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_INFO_CAR,
378 				 &result);
379 	rdev->asm_rev = result >> 16;
380 	if (rdev->pef & RIO_PEF_EXT_FEATURES) {
381 		rdev->efptr = result & 0xffff;
382 		rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
383 							 hopcount);
384 
385 		rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
386 						hopcount, RIO_EFB_ERR_MGMNT);
387 	}
388 
389 	rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
390 				 &rdev->src_ops);
391 	rio_mport_read_config_32(port, destid, hopcount, RIO_DST_OPS_CAR,
392 				 &rdev->dst_ops);
393 
394 	if (do_enum) {
395 		/* Assign component tag to device */
396 		if (next_comptag >= 0x10000) {
397 			pr_err("RIO: Component Tag Counter Overflow\n");
398 			goto cleanup;
399 		}
400 		rio_mport_write_config_32(port, destid, hopcount,
401 					  RIO_COMPONENT_TAG_CSR, next_comptag);
402 		rdev->comp_tag = next_comptag++;
403 		rdev->do_enum = true;
404 	}  else {
405 		rio_mport_read_config_32(port, destid, hopcount,
406 					 RIO_COMPONENT_TAG_CSR,
407 					 &rdev->comp_tag);
408 	}
409 
410 	if (rio_device_has_destid(port, rdev->src_ops, rdev->dst_ops)) {
411 		if (do_enum) {
412 			rio_set_device_id(port, destid, hopcount, next_destid);
413 			rdev->destid = next_destid;
414 			next_destid = rio_destid_alloc(net);
415 		} else
416 			rdev->destid = rio_get_device_id(port, destid, hopcount);
417 
418 		rdev->hopcount = 0xff;
419 	} else {
420 		/* Switch device has an associated destID which
421 		 * will be adjusted later
422 		 */
423 		rdev->destid = destid;
424 		rdev->hopcount = hopcount;
425 	}
426 
427 	/* If a PE has both switch and other functions, show it as a switch */
428 	if (rio_is_switch(rdev)) {
429 		rswitch = rdev->rswitch;
430 		rswitch->port_ok = 0;
431 		spin_lock_init(&rswitch->lock);
432 		rswitch->route_table = kzalloc(sizeof(u8)*
433 					RIO_MAX_ROUTE_ENTRIES(port->sys_size),
434 					GFP_KERNEL);
435 		if (!rswitch->route_table)
436 			goto cleanup;
437 		/* Initialize switch route table */
438 		for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
439 				rdid++)
440 			rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
441 		dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
442 			     rdev->comp_tag & RIO_CTAG_UDEVID);
443 
444 		if (do_enum)
445 			rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0);
446 	} else {
447 		if (do_enum)
448 			/*Enable Input Output Port (transmitter reviever)*/
449 			rio_enable_rx_tx_port(port, 0, destid, hopcount, 0);
450 
451 		dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id,
452 			     rdev->comp_tag & RIO_CTAG_UDEVID);
453 	}
454 
455 	rdev->dev.parent = &net->dev;
456 	rio_attach_device(rdev);
457 	rdev->dev.release = rio_release_dev;
458 	rdev->dma_mask = DMA_BIT_MASK(32);
459 	rdev->dev.dma_mask = &rdev->dma_mask;
460 	rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
461 
462 	if (rdev->dst_ops & RIO_DST_OPS_DOORBELL)
463 		rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
464 				   0, 0xffff);
465 
466 	ret = rio_add_device(rdev);
467 	if (ret)
468 		goto cleanup;
469 
470 	rio_dev_get(rdev);
471 
472 	return rdev;
473 
474 cleanup:
475 	if (rswitch)
476 		kfree(rswitch->route_table);
477 
478 	kfree(rdev);
479 	return NULL;
480 }
481 
482 /**
483  * rio_sport_is_active- Tests if a switch port has an active connection.
484  * @port: Master port to send transaction
485  * @destid: Associated destination ID for switch
486  * @hopcount: Hopcount to reach switch
487  * @sport: Switch port number
488  *
489  * Reads the port error status CSR for a particular switch port to
490  * determine if the port has an active link.  Returns
491  * %RIO_PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
492  * inactive.
493  */
494 static int
495 rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
496 {
497 	u32 result = 0;
498 	u32 ext_ftr_ptr;
499 
500 	ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0);
501 
502 	while (ext_ftr_ptr) {
503 		rio_mport_read_config_32(port, destid, hopcount,
504 					 ext_ftr_ptr, &result);
505 		result = RIO_GET_BLOCK_ID(result);
506 		if ((result == RIO_EFB_SER_EP_FREE_ID) ||
507 		    (result == RIO_EFB_SER_EP_FREE_ID_V13P) ||
508 		    (result == RIO_EFB_SER_EP_FREC_ID))
509 			break;
510 
511 		ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount,
512 						ext_ftr_ptr);
513 	}
514 
515 	if (ext_ftr_ptr)
516 		rio_mport_read_config_32(port, destid, hopcount,
517 					 ext_ftr_ptr +
518 					 RIO_PORT_N_ERR_STS_CSR(sport),
519 					 &result);
520 
521 	return result & RIO_PORT_N_ERR_STS_PORT_OK;
522 }
523 
524 /**
525  * rio_get_host_deviceid_lock- Reads the Host Device ID Lock CSR on a device
526  * @port: Master port to send transaction
527  * @hopcount: Number of hops to the device
528  *
529  * Used during enumeration to read the Host Device ID Lock CSR on a
530  * RIO device. Returns the value of the lock register.
531  */
532 static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
533 {
534 	u32 result;
535 
536 	rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,
537 				 RIO_HOST_DID_LOCK_CSR, &result);
538 
539 	return (u16) (result & 0xffff);
540 }
541 
542 /**
543  * rio_enum_peer- Recursively enumerate a RIO network through a master port
544  * @net: RIO network being enumerated
545  * @port: Master port to send transactions
546  * @hopcount: Number of hops into the network
547  * @prev: Previous RIO device connected to the enumerated one
548  * @prev_port: Port on previous RIO device
549  *
550  * Recursively enumerates a RIO network.  Transactions are sent via the
551  * master port passed in @port.
552  */
553 static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
554 			 u8 hopcount, struct rio_dev *prev, int prev_port)
555 {
556 	struct rio_dev *rdev;
557 	u32 regval;
558 	int tmp;
559 
560 	if (rio_mport_chk_dev_access(port,
561 			RIO_ANY_DESTID(port->sys_size), hopcount)) {
562 		pr_debug("RIO: device access check failed\n");
563 		return -1;
564 	}
565 
566 	if (rio_get_host_deviceid_lock(port, hopcount) == port->host_deviceid) {
567 		pr_debug("RIO: PE already discovered by this host\n");
568 		/*
569 		 * Already discovered by this host. Add it as another
570 		 * link to the existing device.
571 		 */
572 		rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size),
573 				hopcount, RIO_COMPONENT_TAG_CSR, &regval);
574 
575 		if (regval) {
576 			rdev = rio_get_comptag((regval & 0xffff), NULL);
577 
578 			if (rdev && prev && rio_is_switch(prev)) {
579 				pr_debug("RIO: redundant path to %s\n",
580 					 rio_name(rdev));
581 				prev->rswitch->nextdev[prev_port] = rdev;
582 			}
583 		}
584 
585 		return 0;
586 	}
587 
588 	/* Attempt to acquire device lock */
589 	rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
590 				  hopcount,
591 				  RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
592 	while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
593 	       < port->host_deviceid) {
594 		/* Delay a bit */
595 		mdelay(1);
596 		/* Attempt to acquire device lock again */
597 		rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
598 					  hopcount,
599 					  RIO_HOST_DID_LOCK_CSR,
600 					  port->host_deviceid);
601 	}
602 
603 	if (rio_get_host_deviceid_lock(port, hopcount) > port->host_deviceid) {
604 		pr_debug(
605 		    "RIO: PE locked by a higher priority host...retreating\n");
606 		return -1;
607 	}
608 
609 	/* Setup new RIO device */
610 	rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),
611 					hopcount, 1);
612 	if (rdev) {
613 		rdev->prev = prev;
614 		if (prev && rio_is_switch(prev))
615 			prev->rswitch->nextdev[prev_port] = rdev;
616 	} else
617 		return -1;
618 
619 	if (rio_is_switch(rdev)) {
620 		int sw_destid;
621 		int cur_destid;
622 		int sw_inport;
623 		u16 destid;
624 		int port_num;
625 
626 		sw_inport = RIO_GET_PORT_NUM(rdev->swpinfo);
627 		rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
628 				    port->host_deviceid, sw_inport, 0);
629 		rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
630 
631 		destid = rio_destid_first(net);
632 		while (destid != RIO_INVALID_DESTID && destid < next_destid) {
633 			if (destid != port->host_deviceid) {
634 				rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
635 						    destid, sw_inport, 0);
636 				rdev->rswitch->route_table[destid] = sw_inport;
637 			}
638 			destid = rio_destid_next(net, destid + 1);
639 		}
640 		pr_debug(
641 		    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
642 		    rio_name(rdev), rdev->vid, rdev->did,
643 		    RIO_GET_TOTAL_PORTS(rdev->swpinfo));
644 		sw_destid = next_destid;
645 		for (port_num = 0;
646 		     port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);
647 		     port_num++) {
648 			if (sw_inport == port_num) {
649 				rio_enable_rx_tx_port(port, 0,
650 					      RIO_ANY_DESTID(port->sys_size),
651 					      hopcount, port_num);
652 				rdev->rswitch->port_ok |= (1 << port_num);
653 				continue;
654 			}
655 
656 			cur_destid = next_destid;
657 
658 			if (rio_sport_is_active
659 			    (port, RIO_ANY_DESTID(port->sys_size), hopcount,
660 			     port_num)) {
661 				pr_debug(
662 				    "RIO: scanning device on port %d\n",
663 				    port_num);
664 				rio_enable_rx_tx_port(port, 0,
665 					      RIO_ANY_DESTID(port->sys_size),
666 					      hopcount, port_num);
667 				rdev->rswitch->port_ok |= (1 << port_num);
668 				rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
669 						RIO_ANY_DESTID(port->sys_size),
670 						port_num, 0);
671 
672 				if (rio_enum_peer(net, port, hopcount + 1,
673 						  rdev, port_num) < 0)
674 					return -1;
675 
676 				/* Update routing tables */
677 				destid = rio_destid_next(net, cur_destid + 1);
678 				if (destid != RIO_INVALID_DESTID) {
679 					for (destid = cur_destid;
680 					     destid < next_destid;) {
681 						if (destid != port->host_deviceid) {
682 							rio_route_add_entry(rdev,
683 								    RIO_GLOBAL_TABLE,
684 								    destid,
685 								    port_num,
686 								    0);
687 							rdev->rswitch->
688 								route_table[destid] =
689 								port_num;
690 						}
691 						destid = rio_destid_next(net,
692 								destid + 1);
693 					}
694 				}
695 			} else {
696 				/* If switch supports Error Management,
697 				 * set PORT_LOCKOUT bit for unused port
698 				 */
699 				if (rdev->em_efptr)
700 					rio_set_port_lockout(rdev, port_num, 1);
701 
702 				rdev->rswitch->port_ok &= ~(1 << port_num);
703 			}
704 		}
705 
706 		/* Direct Port-write messages to the enumeratiing host */
707 		if ((rdev->src_ops & RIO_SRC_OPS_PORT_WRITE) &&
708 		    (rdev->em_efptr)) {
709 			rio_write_config_32(rdev,
710 					rdev->em_efptr + RIO_EM_PW_TGT_DEVID,
711 					(port->host_deviceid << 16) |
712 					(port->sys_size << 15));
713 		}
714 
715 		rio_init_em(rdev);
716 
717 		/* Check for empty switch */
718 		if (next_destid == sw_destid)
719 			next_destid = rio_destid_alloc(net);
720 
721 		rdev->destid = sw_destid;
722 	} else
723 		pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
724 		    rio_name(rdev), rdev->vid, rdev->did);
725 
726 	return 0;
727 }
728 
729 /**
730  * rio_enum_complete- Tests if enumeration of a network is complete
731  * @port: Master port to send transaction
732  *
733  * Tests the PGCCSR discovered bit for non-zero value (enumeration
734  * complete flag). Return %1 if enumeration is complete or %0 if
735  * enumeration is incomplete.
736  */
737 static int rio_enum_complete(struct rio_mport *port)
738 {
739 	u32 regval;
740 
741 	rio_local_read_config_32(port, port->phys_efptr + RIO_PORT_GEN_CTL_CSR,
742 				 &regval);
743 	return (regval & RIO_PORT_GEN_DISCOVERED) ? 1 : 0;
744 }
745 
746 /**
747  * rio_disc_peer- Recursively discovers a RIO network through a master port
748  * @net: RIO network being discovered
749  * @port: Master port to send transactions
750  * @destid: Current destination ID in network
751  * @hopcount: Number of hops into the network
752  * @prev: previous rio_dev
753  * @prev_port: previous port number
754  *
755  * Recursively discovers a RIO network.  Transactions are sent via the
756  * master port passed in @port.
757  */
758 static int
759 rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
760 	      u8 hopcount, struct rio_dev *prev, int prev_port)
761 {
762 	u8 port_num, route_port;
763 	struct rio_dev *rdev;
764 	u16 ndestid;
765 
766 	/* Setup new RIO device */
767 	if ((rdev = rio_setup_device(net, port, destid, hopcount, 0))) {
768 		rdev->prev = prev;
769 		if (prev && rio_is_switch(prev))
770 			prev->rswitch->nextdev[prev_port] = rdev;
771 	} else
772 		return -1;
773 
774 	if (rio_is_switch(rdev)) {
775 		/* Associated destid is how we accessed this switch */
776 		rdev->destid = destid;
777 
778 		pr_debug(
779 		    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
780 		    rio_name(rdev), rdev->vid, rdev->did,
781 		    RIO_GET_TOTAL_PORTS(rdev->swpinfo));
782 		for (port_num = 0;
783 		     port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);
784 		     port_num++) {
785 			if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)
786 				continue;
787 
788 			if (rio_sport_is_active
789 			    (port, destid, hopcount, port_num)) {
790 				pr_debug(
791 				    "RIO: scanning device on port %d\n",
792 				    port_num);
793 
794 				rio_lock_device(port, destid, hopcount, 1000);
795 
796 				for (ndestid = 0;
797 				     ndestid < RIO_ANY_DESTID(port->sys_size);
798 				     ndestid++) {
799 					rio_route_get_entry(rdev,
800 							    RIO_GLOBAL_TABLE,
801 							    ndestid,
802 							    &route_port, 0);
803 					if (route_port == port_num)
804 						break;
805 				}
806 
807 				if (ndestid == RIO_ANY_DESTID(port->sys_size))
808 					continue;
809 				rio_unlock_device(port, destid, hopcount);
810 				if (rio_disc_peer(net, port, ndestid,
811 					hopcount + 1, rdev, port_num) < 0)
812 					return -1;
813 			}
814 		}
815 	} else
816 		pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
817 		    rio_name(rdev), rdev->vid, rdev->did);
818 
819 	return 0;
820 }
821 
822 /**
823  * rio_mport_is_active- Tests if master port link is active
824  * @port: Master port to test
825  *
826  * Reads the port error status CSR for the master port to
827  * determine if the port has an active link.  Returns
828  * %RIO_PORT_N_ERR_STS_PORT_OK if the  master port is active
829  * or %0 if it is inactive.
830  */
831 static int rio_mport_is_active(struct rio_mport *port)
832 {
833 	u32 result = 0;
834 	u32 ext_ftr_ptr;
835 	int *entry = rio_mport_phys_table;
836 
837 	do {
838 		if ((ext_ftr_ptr =
839 		     rio_mport_get_feature(port, 1, 0, 0, *entry)))
840 			break;
841 	} while (*++entry >= 0);
842 
843 	if (ext_ftr_ptr)
844 		rio_local_read_config_32(port,
845 					 ext_ftr_ptr +
846 					 RIO_PORT_N_ERR_STS_CSR(port->index),
847 					 &result);
848 
849 	return result & RIO_PORT_N_ERR_STS_PORT_OK;
850 }
851 
852 static void rio_scan_release_net(struct rio_net *net)
853 {
854 	pr_debug("RIO-SCAN: %s: net_%d\n", __func__, net->id);
855 	kfree(net->enum_data);
856 }
857 
858 static void rio_scan_release_dev(struct device *dev)
859 {
860 	struct rio_net *net;
861 
862 	net = to_rio_net(dev);
863 	pr_debug("RIO-SCAN: %s: net_%d\n", __func__, net->id);
864 	kfree(net);
865 }
866 
867 /*
868  * rio_scan_alloc_net - Allocate and configure a new RIO network
869  * @mport: Master port associated with the RIO network
870  * @do_enum: Enumeration/Discovery mode flag
871  * @start: logical minimal start id for new net
872  *
873  * Allocates a new RIO network structure and initializes enumerator-specific
874  * part of it (if required).
875  * Returns a RIO network pointer on success or %NULL on failure.
876  */
877 static struct rio_net *rio_scan_alloc_net(struct rio_mport *mport,
878 					  int do_enum, u16 start)
879 {
880 	struct rio_net *net;
881 
882 	net = rio_alloc_net(mport);
883 
884 	if (net && do_enum) {
885 		struct rio_id_table *idtab;
886 		size_t size;
887 
888 		size = sizeof(struct rio_id_table) +
889 				BITS_TO_LONGS(
890 					RIO_MAX_ROUTE_ENTRIES(mport->sys_size)
891 					) * sizeof(long);
892 
893 		idtab = kzalloc(size, GFP_KERNEL);
894 
895 		if (idtab == NULL) {
896 			pr_err("RIO: failed to allocate destID table\n");
897 			rio_free_net(net);
898 			net = NULL;
899 		} else {
900 			net->enum_data = idtab;
901 			net->release = rio_scan_release_net;
902 			idtab->start = start;
903 			idtab->max = RIO_MAX_ROUTE_ENTRIES(mport->sys_size);
904 			spin_lock_init(&idtab->lock);
905 		}
906 	}
907 
908 	if (net) {
909 		net->id = mport->id;
910 		net->hport = mport;
911 		dev_set_name(&net->dev, "rnet_%d", net->id);
912 		net->dev.parent = &mport->dev;
913 		net->dev.release = rio_scan_release_dev;
914 		rio_add_net(net);
915 	}
916 
917 	return net;
918 }
919 
920 /**
921  * rio_update_route_tables- Updates route tables in switches
922  * @net: RIO network to run update on
923  *
924  * For each enumerated device, ensure that each switch in a system
925  * has correct routing entries. Add routes for devices that where
926  * unknown dirung the first enumeration pass through the switch.
927  */
928 static void rio_update_route_tables(struct rio_net *net)
929 {
930 	struct rio_dev *rdev, *swrdev;
931 	struct rio_switch *rswitch;
932 	u8 sport;
933 	u16 destid;
934 
935 	list_for_each_entry(rdev, &net->devices, net_list) {
936 
937 		destid = rdev->destid;
938 
939 		list_for_each_entry(rswitch, &net->switches, node) {
940 
941 			if (rio_is_switch(rdev)	&& (rdev->rswitch == rswitch))
942 				continue;
943 
944 			if (RIO_INVALID_ROUTE == rswitch->route_table[destid]) {
945 				swrdev = sw_to_rio_dev(rswitch);
946 
947 				/* Skip if destid ends in empty switch*/
948 				if (swrdev->destid == destid)
949 					continue;
950 
951 				sport = RIO_GET_PORT_NUM(swrdev->swpinfo);
952 
953 				rio_route_add_entry(swrdev, RIO_GLOBAL_TABLE,
954 						    destid, sport, 0);
955 				rswitch->route_table[destid] = sport;
956 			}
957 		}
958 	}
959 }
960 
961 /**
962  * rio_init_em - Initializes RIO Error Management (for switches)
963  * @rdev: RIO device
964  *
965  * For each enumerated switch, call device-specific error management
966  * initialization routine (if supplied by the switch driver).
967  */
968 static void rio_init_em(struct rio_dev *rdev)
969 {
970 	if (rio_is_switch(rdev) && (rdev->em_efptr) &&
971 	    rdev->rswitch->ops && rdev->rswitch->ops->em_init) {
972 		rdev->rswitch->ops->em_init(rdev);
973 	}
974 }
975 
976 /**
977  * rio_enum_mport- Start enumeration through a master port
978  * @mport: Master port to send transactions
979  * @flags: Enumeration control flags
980  *
981  * Starts the enumeration process. If somebody has enumerated our
982  * master port device, then give up. If not and we have an active
983  * link, then start recursive peer enumeration. Returns %0 if
984  * enumeration succeeds or %-EBUSY if enumeration fails.
985  */
986 static int rio_enum_mport(struct rio_mport *mport, u32 flags)
987 {
988 	struct rio_net *net = NULL;
989 	int rc = 0;
990 
991 	printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,
992 	       mport->name);
993 
994 	/*
995 	 * To avoid multiple start requests (repeat enumeration is not supported
996 	 * by this method) check if enumeration/discovery was performed for this
997 	 * mport: if mport was added into the list of mports for a net exit
998 	 * with error.
999 	 */
1000 	if (mport->nnode.next || mport->nnode.prev)
1001 		return -EBUSY;
1002 
1003 	/* If somebody else enumerated our master port device, bail. */
1004 	if (rio_enum_host(mport) < 0) {
1005 		printk(KERN_INFO
1006 		       "RIO: master port %d device has been enumerated by a remote host\n",
1007 		       mport->id);
1008 		rc = -EBUSY;
1009 		goto out;
1010 	}
1011 
1012 	/* If master port has an active link, allocate net and enum peers */
1013 	if (rio_mport_is_active(mport)) {
1014 		net = rio_scan_alloc_net(mport, 1, 0);
1015 		if (!net) {
1016 			printk(KERN_ERR "RIO: failed to allocate new net\n");
1017 			rc = -ENOMEM;
1018 			goto out;
1019 		}
1020 
1021 		/* reserve mport destID in new net */
1022 		rio_destid_reserve(net, mport->host_deviceid);
1023 
1024 		/* Enable Input Output Port (transmitter reviever) */
1025 		rio_enable_rx_tx_port(mport, 1, 0, 0, 0);
1026 
1027 		/* Set component tag for host */
1028 		rio_local_write_config_32(mport, RIO_COMPONENT_TAG_CSR,
1029 					  next_comptag++);
1030 
1031 		next_destid = rio_destid_alloc(net);
1032 
1033 		if (rio_enum_peer(net, mport, 0, NULL, 0) < 0) {
1034 			/* A higher priority host won enumeration, bail. */
1035 			printk(KERN_INFO
1036 			       "RIO: master port %d device has lost enumeration to a remote host\n",
1037 			       mport->id);
1038 			rio_clear_locks(net);
1039 			rc = -EBUSY;
1040 			goto out;
1041 		}
1042 		/* free the last allocated destID (unused) */
1043 		rio_destid_free(net, next_destid);
1044 		rio_update_route_tables(net);
1045 		rio_clear_locks(net);
1046 		rio_pw_enable(mport, 1);
1047 	} else {
1048 		printk(KERN_INFO "RIO: master port %d link inactive\n",
1049 		       mport->id);
1050 		rc = -EINVAL;
1051 	}
1052 
1053       out:
1054 	return rc;
1055 }
1056 
1057 /**
1058  * rio_build_route_tables- Generate route tables from switch route entries
1059  * @net: RIO network to run route tables scan on
1060  *
1061  * For each switch device, generate a route table by copying existing
1062  * route entries from the switch.
1063  */
1064 static void rio_build_route_tables(struct rio_net *net)
1065 {
1066 	struct rio_switch *rswitch;
1067 	struct rio_dev *rdev;
1068 	int i;
1069 	u8 sport;
1070 
1071 	list_for_each_entry(rswitch, &net->switches, node) {
1072 		rdev = sw_to_rio_dev(rswitch);
1073 
1074 		rio_lock_device(net->hport, rdev->destid,
1075 				rdev->hopcount, 1000);
1076 		for (i = 0;
1077 		     i < RIO_MAX_ROUTE_ENTRIES(net->hport->sys_size);
1078 		     i++) {
1079 			if (rio_route_get_entry(rdev, RIO_GLOBAL_TABLE,
1080 						i, &sport, 0) < 0)
1081 				continue;
1082 			rswitch->route_table[i] = sport;
1083 		}
1084 
1085 		rio_unlock_device(net->hport, rdev->destid, rdev->hopcount);
1086 	}
1087 }
1088 
1089 /**
1090  * rio_disc_mport- Start discovery through a master port
1091  * @mport: Master port to send transactions
1092  * @flags: discovery control flags
1093  *
1094  * Starts the discovery process. If we have an active link,
1095  * then wait for the signal that enumeration is complete (if wait
1096  * is allowed).
1097  * When enumeration completion is signaled, start recursive
1098  * peer discovery. Returns %0 if discovery succeeds or %-EBUSY
1099  * on failure.
1100  */
1101 static int rio_disc_mport(struct rio_mport *mport, u32 flags)
1102 {
1103 	struct rio_net *net = NULL;
1104 	unsigned long to_end;
1105 
1106 	printk(KERN_INFO "RIO: discover master port %d, %s\n", mport->id,
1107 	       mport->name);
1108 
1109 	/* If master port has an active link, allocate net and discover peers */
1110 	if (rio_mport_is_active(mport)) {
1111 		if (rio_enum_complete(mport))
1112 			goto enum_done;
1113 		else if (flags & RIO_SCAN_ENUM_NO_WAIT)
1114 			return -EAGAIN;
1115 
1116 		pr_debug("RIO: wait for enumeration to complete...\n");
1117 
1118 		to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ;
1119 		while (time_before(jiffies, to_end)) {
1120 			if (rio_enum_complete(mport))
1121 				goto enum_done;
1122 			msleep(10);
1123 		}
1124 
1125 		pr_debug("RIO: discovery timeout on mport %d %s\n",
1126 			 mport->id, mport->name);
1127 		goto bail;
1128 enum_done:
1129 		pr_debug("RIO: ... enumeration done\n");
1130 
1131 		net = rio_scan_alloc_net(mport, 0, 0);
1132 		if (!net) {
1133 			printk(KERN_ERR "RIO: Failed to allocate new net\n");
1134 			goto bail;
1135 		}
1136 
1137 		/* Read DestID assigned by enumerator */
1138 		rio_local_read_config_32(mport, RIO_DID_CSR,
1139 					 &mport->host_deviceid);
1140 		mport->host_deviceid = RIO_GET_DID(mport->sys_size,
1141 						   mport->host_deviceid);
1142 
1143 		if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
1144 					0, NULL, 0) < 0) {
1145 			printk(KERN_INFO
1146 			       "RIO: master port %d device has failed discovery\n",
1147 			       mport->id);
1148 			goto bail;
1149 		}
1150 
1151 		rio_build_route_tables(net);
1152 	}
1153 
1154 	return 0;
1155 bail:
1156 	return -EBUSY;
1157 }
1158 
1159 static struct rio_scan rio_scan_ops = {
1160 	.owner = THIS_MODULE,
1161 	.enumerate = rio_enum_mport,
1162 	.discover = rio_disc_mport,
1163 };
1164 
1165 static bool scan;
1166 module_param(scan, bool, 0);
1167 MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery "
1168 			"(default = 0)");
1169 
1170 /**
1171  * rio_basic_attach:
1172  *
1173  * When this enumeration/discovery method is loaded as a module this function
1174  * registers its specific enumeration and discover routines for all available
1175  * RapidIO mport devices. The "scan" command line parameter controls ability of
1176  * the module to start RapidIO enumeration/discovery automatically.
1177  *
1178  * Returns 0 for success or -EIO if unable to register itself.
1179  *
1180  * This enumeration/discovery method cannot be unloaded and therefore does not
1181  * provide a matching cleanup_module routine.
1182  */
1183 
1184 static int __init rio_basic_attach(void)
1185 {
1186 	if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops))
1187 		return -EIO;
1188 	if (scan)
1189 		rio_init_mports();
1190 	return 0;
1191 }
1192 
1193 late_initcall(rio_basic_attach);
1194 
1195 MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery");
1196 MODULE_LICENSE("GPL");
1197