xref: /openbmc/linux/drivers/rapidio/devices/tsi721.c (revision e3d786a3)
1 /*
2  * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge
3  *
4  * Copyright 2011 Integrated Device Technology, Inc.
5  * Alexandre Bounine <alexandre.bounine@idt.com>
6  * Chul Kim <chul.kim@idt.com>
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of the GNU General Public License as published by the Free
10  * Software Foundation; either version 2 of the License, or (at your option)
11  * any later version.
12  *
13  * This program is distributed in the hope that it will be useful, but WITHOUT
14  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
16  * more details.
17  *
18  * You should have received a copy of the GNU General Public License along with
19  * this program; if not, write to the Free Software Foundation, Inc., 59
20  * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
21  */
22 
23 #include <linux/io.h>
24 #include <linux/errno.h>
25 #include <linux/init.h>
26 #include <linux/ioport.h>
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/pci.h>
30 #include <linux/rio.h>
31 #include <linux/rio_drv.h>
32 #include <linux/dma-mapping.h>
33 #include <linux/interrupt.h>
34 #include <linux/kfifo.h>
35 #include <linux/delay.h>
36 
37 #include "tsi721.h"
38 
39 #ifdef DEBUG
40 u32 tsi_dbg_level;
41 module_param_named(dbg_level, tsi_dbg_level, uint, S_IWUSR | S_IRUGO);
42 MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)");
43 #endif
44 
45 static int pcie_mrrs = -1;
46 module_param(pcie_mrrs, int, S_IRUGO);
47 MODULE_PARM_DESC(pcie_mrrs, "PCIe MRRS override value (0...5)");
48 
49 static u8 mbox_sel = 0x0f;
50 module_param(mbox_sel, byte, S_IRUGO);
51 MODULE_PARM_DESC(mbox_sel,
52 		 "RIO Messaging MBOX Selection Mask (default: 0x0f = all)");
53 
54 static DEFINE_SPINLOCK(tsi721_maint_lock);
55 
56 static void tsi721_omsg_handler(struct tsi721_device *priv, int ch);
57 static void tsi721_imsg_handler(struct tsi721_device *priv, int ch);
58 
59 /**
60  * tsi721_lcread - read from local SREP config space
61  * @mport: RapidIO master port info
62  * @index: ID of RapdiIO interface
63  * @offset: Offset into configuration space
64  * @len: Length (in bytes) of the maintenance transaction
65  * @data: Value to be read into
66  *
67  * Generates a local SREP space read. Returns %0 on
68  * success or %-EINVAL on failure.
69  */
70 static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset,
71 			 int len, u32 *data)
72 {
73 	struct tsi721_device *priv = mport->priv;
74 
75 	if (len != sizeof(u32))
76 		return -EINVAL; /* only 32-bit access is supported */
77 
78 	*data = ioread32(priv->regs + offset);
79 
80 	return 0;
81 }
82 
83 /**
84  * tsi721_lcwrite - write into local SREP config space
85  * @mport: RapidIO master port info
86  * @index: ID of RapdiIO interface
87  * @offset: Offset into configuration space
88  * @len: Length (in bytes) of the maintenance transaction
89  * @data: Value to be written
90  *
91  * Generates a local write into SREP configuration space. Returns %0 on
92  * success or %-EINVAL on failure.
93  */
94 static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset,
95 			  int len, u32 data)
96 {
97 	struct tsi721_device *priv = mport->priv;
98 
99 	if (len != sizeof(u32))
100 		return -EINVAL; /* only 32-bit access is supported */
101 
102 	iowrite32(data, priv->regs + offset);
103 
104 	return 0;
105 }
106 
107 /**
108  * tsi721_maint_dma - Helper function to generate RapidIO maintenance
109  *                    transactions using designated Tsi721 DMA channel.
110  * @priv: pointer to tsi721 private data
111  * @sys_size: RapdiIO transport system size
112  * @destid: Destination ID of transaction
113  * @hopcount: Number of hops to target device
114  * @offset: Offset into configuration space
115  * @len: Length (in bytes) of the maintenance transaction
116  * @data: Location to be read from or write into
117  * @do_wr: Operation flag (1 == MAINT_WR)
118  *
119  * Generates a RapidIO maintenance transaction (Read or Write).
120  * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
121  */
122 static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size,
123 			u16 destid, u8 hopcount, u32 offset, int len,
124 			u32 *data, int do_wr)
125 {
126 	void __iomem *regs = priv->regs + TSI721_DMAC_BASE(priv->mdma.ch_id);
127 	struct tsi721_dma_desc *bd_ptr;
128 	u32 rd_count, swr_ptr, ch_stat;
129 	unsigned long flags;
130 	int i, err = 0;
131 	u32 op = do_wr ? MAINT_WR : MAINT_RD;
132 
133 	if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32)))
134 		return -EINVAL;
135 
136 	spin_lock_irqsave(&tsi721_maint_lock, flags);
137 
138 	bd_ptr = priv->mdma.bd_base;
139 
140 	rd_count = ioread32(regs + TSI721_DMAC_DRDCNT);
141 
142 	/* Initialize DMA descriptor */
143 	bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid);
144 	bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04);
145 	bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset);
146 	bd_ptr[0].raddr_hi = 0;
147 	if (do_wr)
148 		bd_ptr[0].data[0] = cpu_to_be32p(data);
149 	else
150 		bd_ptr[0].data[0] = 0xffffffff;
151 
152 	mb();
153 
154 	/* Start DMA operation */
155 	iowrite32(rd_count + 2,	regs + TSI721_DMAC_DWRCNT);
156 	ioread32(regs + TSI721_DMAC_DWRCNT);
157 	i = 0;
158 
159 	/* Wait until DMA transfer is finished */
160 	while ((ch_stat = ioread32(regs + TSI721_DMAC_STS))
161 							& TSI721_DMAC_STS_RUN) {
162 		udelay(1);
163 		if (++i >= 5000000) {
164 			tsi_debug(MAINT, &priv->pdev->dev,
165 				"DMA[%d] read timeout ch_status=%x",
166 				priv->mdma.ch_id, ch_stat);
167 			if (!do_wr)
168 				*data = 0xffffffff;
169 			err = -EIO;
170 			goto err_out;
171 		}
172 	}
173 
174 	if (ch_stat & TSI721_DMAC_STS_ABORT) {
175 		/* If DMA operation aborted due to error,
176 		 * reinitialize DMA channel
177 		 */
178 		tsi_debug(MAINT, &priv->pdev->dev, "DMA ABORT ch_stat=%x",
179 			  ch_stat);
180 		tsi_debug(MAINT, &priv->pdev->dev,
181 			  "OP=%d : destid=%x hc=%x off=%x",
182 			  do_wr ? MAINT_WR : MAINT_RD,
183 			  destid, hopcount, offset);
184 		iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
185 		iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
186 		udelay(10);
187 		iowrite32(0, regs + TSI721_DMAC_DWRCNT);
188 		udelay(1);
189 		if (!do_wr)
190 			*data = 0xffffffff;
191 		err = -EIO;
192 		goto err_out;
193 	}
194 
195 	if (!do_wr)
196 		*data = be32_to_cpu(bd_ptr[0].data[0]);
197 
198 	/*
199 	 * Update descriptor status FIFO RD pointer.
200 	 * NOTE: Skipping check and clear FIFO entries because we are waiting
201 	 * for transfer to be completed.
202 	 */
203 	swr_ptr = ioread32(regs + TSI721_DMAC_DSWP);
204 	iowrite32(swr_ptr, regs + TSI721_DMAC_DSRP);
205 
206 err_out:
207 	spin_unlock_irqrestore(&tsi721_maint_lock, flags);
208 
209 	return err;
210 }
211 
212 /**
213  * tsi721_cread_dma - Generate a RapidIO maintenance read transaction
214  *                    using Tsi721 BDMA engine.
215  * @mport: RapidIO master port control structure
216  * @index: ID of RapdiIO interface
217  * @destid: Destination ID of transaction
218  * @hopcount: Number of hops to target device
219  * @offset: Offset into configuration space
220  * @len: Length (in bytes) of the maintenance transaction
221  * @val: Location to be read into
222  *
223  * Generates a RapidIO maintenance read transaction.
224  * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
225  */
226 static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid,
227 			u8 hopcount, u32 offset, int len, u32 *data)
228 {
229 	struct tsi721_device *priv = mport->priv;
230 
231 	return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
232 				offset, len, data, 0);
233 }
234 
235 /**
236  * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction
237  *                     using Tsi721 BDMA engine
238  * @mport: RapidIO master port control structure
239  * @index: ID of RapdiIO interface
240  * @destid: Destination ID of transaction
241  * @hopcount: Number of hops to target device
242  * @offset: Offset into configuration space
243  * @len: Length (in bytes) of the maintenance transaction
244  * @val: Value to be written
245  *
246  * Generates a RapidIO maintenance write transaction.
247  * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
248  */
249 static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid,
250 			 u8 hopcount, u32 offset, int len, u32 data)
251 {
252 	struct tsi721_device *priv = mport->priv;
253 	u32 temp = data;
254 
255 	return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
256 				offset, len, &temp, 1);
257 }
258 
259 /**
260  * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler
261  * @priv:  tsi721 device private structure
262  *
263  * Handles inbound port-write interrupts. Copies PW message from an internal
264  * buffer into PW message FIFO and schedules deferred routine to process
265  * queued messages.
266  */
267 static int
268 tsi721_pw_handler(struct tsi721_device *priv)
269 {
270 	u32 pw_stat;
271 	u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)];
272 
273 
274 	pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT);
275 
276 	if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) {
277 		pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0));
278 		pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1));
279 		pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2));
280 		pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3));
281 
282 		/* Queue PW message (if there is room in FIFO),
283 		 * otherwise discard it.
284 		 */
285 		spin_lock(&priv->pw_fifo_lock);
286 		if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE)
287 			kfifo_in(&priv->pw_fifo, pw_buf,
288 						TSI721_RIO_PW_MSG_SIZE);
289 		else
290 			priv->pw_discard_count++;
291 		spin_unlock(&priv->pw_fifo_lock);
292 	}
293 
294 	/* Clear pending PW interrupts */
295 	iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
296 		  priv->regs + TSI721_RIO_PW_RX_STAT);
297 
298 	schedule_work(&priv->pw_work);
299 
300 	return 0;
301 }
302 
303 static void tsi721_pw_dpc(struct work_struct *work)
304 {
305 	struct tsi721_device *priv = container_of(work, struct tsi721_device,
306 						    pw_work);
307 	union rio_pw_msg pwmsg;
308 
309 	/*
310 	 * Process port-write messages
311 	 */
312 	while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)&pwmsg,
313 			 TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) {
314 		/* Pass the port-write message to RIO core for processing */
315 		rio_inb_pwrite_handler(&priv->mport, &pwmsg);
316 	}
317 }
318 
319 /**
320  * tsi721_pw_enable - enable/disable port-write interface init
321  * @mport: Master port implementing the port write unit
322  * @enable:    1=enable; 0=disable port-write message handling
323  */
324 static int tsi721_pw_enable(struct rio_mport *mport, int enable)
325 {
326 	struct tsi721_device *priv = mport->priv;
327 	u32 rval;
328 
329 	rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE);
330 
331 	if (enable)
332 		rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX;
333 	else
334 		rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX;
335 
336 	/* Clear pending PW interrupts */
337 	iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
338 		  priv->regs + TSI721_RIO_PW_RX_STAT);
339 	/* Update enable bits */
340 	iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE);
341 
342 	return 0;
343 }
344 
345 /**
346  * tsi721_dsend - Send a RapidIO doorbell
347  * @mport: RapidIO master port info
348  * @index: ID of RapidIO interface
349  * @destid: Destination ID of target device
350  * @data: 16-bit info field of RapidIO doorbell
351  *
352  * Sends a RapidIO doorbell message. Always returns %0.
353  */
354 static int tsi721_dsend(struct rio_mport *mport, int index,
355 			u16 destid, u16 data)
356 {
357 	struct tsi721_device *priv = mport->priv;
358 	u32 offset;
359 
360 	offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) |
361 		 (destid << 2);
362 
363 	tsi_debug(DBELL, &priv->pdev->dev,
364 		  "Send Doorbell 0x%04x to destID 0x%x", data, destid);
365 	iowrite16be(data, priv->odb_base + offset);
366 
367 	return 0;
368 }
369 
370 /**
371  * tsi721_dbell_handler - Tsi721 doorbell interrupt handler
372  * @priv: tsi721 device-specific data structure
373  *
374  * Handles inbound doorbell interrupts. Copies doorbell entry from an internal
375  * buffer into DB message FIFO and schedules deferred  routine to process
376  * queued DBs.
377  */
378 static int
379 tsi721_dbell_handler(struct tsi721_device *priv)
380 {
381 	u32 regval;
382 
383 	/* Disable IDB interrupts */
384 	regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
385 	regval &= ~TSI721_SR_CHINT_IDBQRCV;
386 	iowrite32(regval,
387 		priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
388 
389 	schedule_work(&priv->idb_work);
390 
391 	return 0;
392 }
393 
394 static void tsi721_db_dpc(struct work_struct *work)
395 {
396 	struct tsi721_device *priv = container_of(work, struct tsi721_device,
397 						    idb_work);
398 	struct rio_mport *mport;
399 	struct rio_dbell *dbell;
400 	int found = 0;
401 	u32 wr_ptr, rd_ptr;
402 	u64 *idb_entry;
403 	u32 regval;
404 	union {
405 		u64 msg;
406 		u8  bytes[8];
407 	} idb;
408 
409 	/*
410 	 * Process queued inbound doorbells
411 	 */
412 	mport = &priv->mport;
413 
414 	wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
415 	rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE;
416 
417 	while (wr_ptr != rd_ptr) {
418 		idb_entry = (u64 *)(priv->idb_base +
419 					(TSI721_IDB_ENTRY_SIZE * rd_ptr));
420 		rd_ptr++;
421 		rd_ptr %= IDB_QSIZE;
422 		idb.msg = *idb_entry;
423 		*idb_entry = 0;
424 
425 		/* Process one doorbell */
426 		list_for_each_entry(dbell, &mport->dbells, node) {
427 			if ((dbell->res->start <= DBELL_INF(idb.bytes)) &&
428 			    (dbell->res->end >= DBELL_INF(idb.bytes))) {
429 				found = 1;
430 				break;
431 			}
432 		}
433 
434 		if (found) {
435 			dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes),
436 				    DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
437 		} else {
438 			tsi_debug(DBELL, &priv->pdev->dev,
439 				  "spurious IDB sid %2.2x tid %2.2x info %4.4x",
440 				  DBELL_SID(idb.bytes), DBELL_TID(idb.bytes),
441 				  DBELL_INF(idb.bytes));
442 		}
443 
444 		wr_ptr = ioread32(priv->regs +
445 				  TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
446 	}
447 
448 	iowrite32(rd_ptr & (IDB_QSIZE - 1),
449 		priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
450 
451 	/* Re-enable IDB interrupts */
452 	regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
453 	regval |= TSI721_SR_CHINT_IDBQRCV;
454 	iowrite32(regval,
455 		priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
456 
457 	wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
458 	if (wr_ptr != rd_ptr)
459 		schedule_work(&priv->idb_work);
460 }
461 
462 /**
463  * tsi721_irqhandler - Tsi721 interrupt handler
464  * @irq: Linux interrupt number
465  * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
466  *
467  * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported
468  * interrupt events and calls an event-specific handler(s).
469  */
470 static irqreturn_t tsi721_irqhandler(int irq, void *ptr)
471 {
472 	struct tsi721_device *priv = (struct tsi721_device *)ptr;
473 	u32 dev_int;
474 	u32 dev_ch_int;
475 	u32 intval;
476 	u32 ch_inte;
477 
478 	/* For MSI mode disable all device-level interrupts */
479 	if (priv->flags & TSI721_USING_MSI)
480 		iowrite32(0, priv->regs + TSI721_DEV_INTE);
481 
482 	dev_int = ioread32(priv->regs + TSI721_DEV_INT);
483 	if (!dev_int)
484 		return IRQ_NONE;
485 
486 	dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT);
487 
488 	if (dev_int & TSI721_DEV_INT_SR2PC_CH) {
489 		/* Service SR2PC Channel interrupts */
490 		if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) {
491 			/* Service Inbound Doorbell interrupt */
492 			intval = ioread32(priv->regs +
493 						TSI721_SR_CHINT(IDB_QUEUE));
494 			if (intval & TSI721_SR_CHINT_IDBQRCV)
495 				tsi721_dbell_handler(priv);
496 			else
497 				tsi_info(&priv->pdev->dev,
498 					"Unsupported SR_CH_INT %x", intval);
499 
500 			/* Clear interrupts */
501 			iowrite32(intval,
502 				priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
503 			ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
504 		}
505 	}
506 
507 	if (dev_int & TSI721_DEV_INT_SMSG_CH) {
508 		int ch;
509 
510 		/*
511 		 * Service channel interrupts from Messaging Engine
512 		 */
513 
514 		if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */
515 			/* Disable signaled OB MSG Channel interrupts */
516 			ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
517 			ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M);
518 			iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
519 
520 			/*
521 			 * Process Inbound Message interrupt for each MBOX
522 			 */
523 			for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) {
524 				if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch)))
525 					continue;
526 				tsi721_imsg_handler(priv, ch);
527 			}
528 		}
529 
530 		if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */
531 			/* Disable signaled OB MSG Channel interrupts */
532 			ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
533 			ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M);
534 			iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
535 
536 			/*
537 			 * Process Outbound Message interrupts for each MBOX
538 			 */
539 
540 			for (ch = 0; ch < RIO_MAX_MBOX; ch++) {
541 				if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch)))
542 					continue;
543 				tsi721_omsg_handler(priv, ch);
544 			}
545 		}
546 	}
547 
548 	if (dev_int & TSI721_DEV_INT_SRIO) {
549 		/* Service SRIO MAC interrupts */
550 		intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
551 		if (intval & TSI721_RIO_EM_INT_STAT_PW_RX)
552 			tsi721_pw_handler(priv);
553 	}
554 
555 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
556 	if (dev_int & TSI721_DEV_INT_BDMA_CH) {
557 		int ch;
558 
559 		if (dev_ch_int & TSI721_INT_BDMA_CHAN_M) {
560 			tsi_debug(DMA, &priv->pdev->dev,
561 				  "IRQ from DMA channel 0x%08x", dev_ch_int);
562 
563 			for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) {
564 				if (!(dev_ch_int & TSI721_INT_BDMA_CHAN(ch)))
565 					continue;
566 				tsi721_bdma_handler(&priv->bdma[ch]);
567 			}
568 		}
569 	}
570 #endif
571 
572 	/* For MSI mode re-enable device-level interrupts */
573 	if (priv->flags & TSI721_USING_MSI) {
574 		dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
575 			TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
576 		iowrite32(dev_int, priv->regs + TSI721_DEV_INTE);
577 	}
578 
579 	return IRQ_HANDLED;
580 }
581 
582 static void tsi721_interrupts_init(struct tsi721_device *priv)
583 {
584 	u32 intr;
585 
586 	/* Enable IDB interrupts */
587 	iowrite32(TSI721_SR_CHINT_ALL,
588 		priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
589 	iowrite32(TSI721_SR_CHINT_IDBQRCV,
590 		priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
591 
592 	/* Enable SRIO MAC interrupts */
593 	iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT,
594 		priv->regs + TSI721_RIO_EM_DEV_INT_EN);
595 
596 	/* Enable interrupts from channels in use */
597 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
598 	intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE) |
599 		(TSI721_INT_BDMA_CHAN_M &
600 		 ~TSI721_INT_BDMA_CHAN(TSI721_DMACH_MAINT));
601 #else
602 	intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE);
603 #endif
604 	iowrite32(intr,	priv->regs + TSI721_DEV_CHAN_INTE);
605 
606 	if (priv->flags & TSI721_USING_MSIX)
607 		intr = TSI721_DEV_INT_SRIO;
608 	else
609 		intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
610 			TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
611 
612 	iowrite32(intr, priv->regs + TSI721_DEV_INTE);
613 	ioread32(priv->regs + TSI721_DEV_INTE);
614 }
615 
616 #ifdef CONFIG_PCI_MSI
617 /**
618  * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging
619  * @irq: Linux interrupt number
620  * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
621  *
622  * Handles outbound messaging interrupts signaled using MSI-X.
623  */
624 static irqreturn_t tsi721_omsg_msix(int irq, void *ptr)
625 {
626 	struct tsi721_device *priv = (struct tsi721_device *)ptr;
627 	int mbox;
628 
629 	mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX;
630 	tsi721_omsg_handler(priv, mbox);
631 	return IRQ_HANDLED;
632 }
633 
634 /**
635  * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging
636  * @irq: Linux interrupt number
637  * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
638  *
639  * Handles inbound messaging interrupts signaled using MSI-X.
640  */
641 static irqreturn_t tsi721_imsg_msix(int irq, void *ptr)
642 {
643 	struct tsi721_device *priv = (struct tsi721_device *)ptr;
644 	int mbox;
645 
646 	mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX;
647 	tsi721_imsg_handler(priv, mbox + 4);
648 	return IRQ_HANDLED;
649 }
650 
651 /**
652  * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler
653  * @irq: Linux interrupt number
654  * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
655  *
656  * Handles Tsi721 interrupts from SRIO MAC.
657  */
658 static irqreturn_t tsi721_srio_msix(int irq, void *ptr)
659 {
660 	struct tsi721_device *priv = (struct tsi721_device *)ptr;
661 	u32 srio_int;
662 
663 	/* Service SRIO MAC interrupts */
664 	srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
665 	if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX)
666 		tsi721_pw_handler(priv);
667 
668 	return IRQ_HANDLED;
669 }
670 
671 /**
672  * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler
673  * @irq: Linux interrupt number
674  * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
675  *
676  * Handles Tsi721 interrupts from SR2PC Channel.
677  * NOTE: At this moment services only one SR2PC channel associated with inbound
678  * doorbells.
679  */
680 static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr)
681 {
682 	struct tsi721_device *priv = (struct tsi721_device *)ptr;
683 	u32 sr_ch_int;
684 
685 	/* Service Inbound DB interrupt from SR2PC channel */
686 	sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
687 	if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV)
688 		tsi721_dbell_handler(priv);
689 
690 	/* Clear interrupts */
691 	iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
692 	/* Read back to ensure that interrupt was cleared */
693 	sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
694 
695 	return IRQ_HANDLED;
696 }
697 
698 /**
699  * tsi721_request_msix - register interrupt service for MSI-X mode.
700  * @priv: tsi721 device-specific data structure
701  *
702  * Registers MSI-X interrupt service routines for interrupts that are active
703  * immediately after mport initialization. Messaging interrupt service routines
704  * should be registered during corresponding open requests.
705  */
706 static int tsi721_request_msix(struct tsi721_device *priv)
707 {
708 	int err = 0;
709 
710 	err = request_irq(priv->msix[TSI721_VECT_IDB].vector,
711 			tsi721_sr2pc_ch_msix, 0,
712 			priv->msix[TSI721_VECT_IDB].irq_name, (void *)priv);
713 	if (err)
714 		return err;
715 
716 	err = request_irq(priv->msix[TSI721_VECT_PWRX].vector,
717 			tsi721_srio_msix, 0,
718 			priv->msix[TSI721_VECT_PWRX].irq_name, (void *)priv);
719 	if (err) {
720 		free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv);
721 		return err;
722 	}
723 
724 	return 0;
725 }
726 
727 /**
728  * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721.
729  * @priv: pointer to tsi721 private data
730  *
731  * Configures MSI-X support for Tsi721. Supports only an exact number
732  * of requested vectors.
733  */
734 static int tsi721_enable_msix(struct tsi721_device *priv)
735 {
736 	struct msix_entry entries[TSI721_VECT_MAX];
737 	int err;
738 	int i;
739 
740 	entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE);
741 	entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT;
742 
743 	/*
744 	 * Initialize MSI-X entries for Messaging Engine:
745 	 * this driver supports four RIO mailboxes (inbound and outbound)
746 	 * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore
747 	 * offset +4 is added to IB MBOX number.
748 	 */
749 	for (i = 0; i < RIO_MAX_MBOX; i++) {
750 		entries[TSI721_VECT_IMB0_RCV + i].entry =
751 					TSI721_MSIX_IMSG_DQ_RCV(i + 4);
752 		entries[TSI721_VECT_IMB0_INT + i].entry =
753 					TSI721_MSIX_IMSG_INT(i + 4);
754 		entries[TSI721_VECT_OMB0_DONE + i].entry =
755 					TSI721_MSIX_OMSG_DONE(i);
756 		entries[TSI721_VECT_OMB0_INT + i].entry =
757 					TSI721_MSIX_OMSG_INT(i);
758 	}
759 
760 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
761 	/*
762 	 * Initialize MSI-X entries for Block DMA Engine:
763 	 * this driver supports XXX DMA channels
764 	 * (one is reserved for SRIO maintenance transactions)
765 	 */
766 	for (i = 0; i < TSI721_DMA_CHNUM; i++) {
767 		entries[TSI721_VECT_DMA0_DONE + i].entry =
768 					TSI721_MSIX_DMACH_DONE(i);
769 		entries[TSI721_VECT_DMA0_INT + i].entry =
770 					TSI721_MSIX_DMACH_INT(i);
771 	}
772 #endif /* CONFIG_RAPIDIO_DMA_ENGINE */
773 
774 	err = pci_enable_msix_exact(priv->pdev, entries, ARRAY_SIZE(entries));
775 	if (err) {
776 		tsi_err(&priv->pdev->dev,
777 			"Failed to enable MSI-X (err=%d)", err);
778 		return err;
779 	}
780 
781 	/*
782 	 * Copy MSI-X vector information into tsi721 private structure
783 	 */
784 	priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector;
785 	snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX,
786 		 DRV_NAME "-idb@pci:%s", pci_name(priv->pdev));
787 	priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector;
788 	snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX,
789 		 DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev));
790 
791 	for (i = 0; i < RIO_MAX_MBOX; i++) {
792 		priv->msix[TSI721_VECT_IMB0_RCV + i].vector =
793 				entries[TSI721_VECT_IMB0_RCV + i].vector;
794 		snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name,
795 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s",
796 			 i, pci_name(priv->pdev));
797 
798 		priv->msix[TSI721_VECT_IMB0_INT + i].vector =
799 				entries[TSI721_VECT_IMB0_INT + i].vector;
800 		snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name,
801 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s",
802 			 i, pci_name(priv->pdev));
803 
804 		priv->msix[TSI721_VECT_OMB0_DONE + i].vector =
805 				entries[TSI721_VECT_OMB0_DONE + i].vector;
806 		snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name,
807 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s",
808 			 i, pci_name(priv->pdev));
809 
810 		priv->msix[TSI721_VECT_OMB0_INT + i].vector =
811 				entries[TSI721_VECT_OMB0_INT + i].vector;
812 		snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name,
813 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s",
814 			 i, pci_name(priv->pdev));
815 	}
816 
817 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
818 	for (i = 0; i < TSI721_DMA_CHNUM; i++) {
819 		priv->msix[TSI721_VECT_DMA0_DONE + i].vector =
820 				entries[TSI721_VECT_DMA0_DONE + i].vector;
821 		snprintf(priv->msix[TSI721_VECT_DMA0_DONE + i].irq_name,
822 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmad%d@pci:%s",
823 			 i, pci_name(priv->pdev));
824 
825 		priv->msix[TSI721_VECT_DMA0_INT + i].vector =
826 				entries[TSI721_VECT_DMA0_INT + i].vector;
827 		snprintf(priv->msix[TSI721_VECT_DMA0_INT + i].irq_name,
828 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmai%d@pci:%s",
829 			 i, pci_name(priv->pdev));
830 	}
831 #endif /* CONFIG_RAPIDIO_DMA_ENGINE */
832 
833 	return 0;
834 }
835 #endif /* CONFIG_PCI_MSI */
836 
837 static int tsi721_request_irq(struct tsi721_device *priv)
838 {
839 	int err;
840 
841 #ifdef CONFIG_PCI_MSI
842 	if (priv->flags & TSI721_USING_MSIX)
843 		err = tsi721_request_msix(priv);
844 	else
845 #endif
846 		err = request_irq(priv->pdev->irq, tsi721_irqhandler,
847 			  (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED,
848 			  DRV_NAME, (void *)priv);
849 
850 	if (err)
851 		tsi_err(&priv->pdev->dev,
852 			"Unable to allocate interrupt, err=%d", err);
853 
854 	return err;
855 }
856 
857 static void tsi721_free_irq(struct tsi721_device *priv)
858 {
859 #ifdef CONFIG_PCI_MSI
860 	if (priv->flags & TSI721_USING_MSIX) {
861 		free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv);
862 		free_irq(priv->msix[TSI721_VECT_PWRX].vector, (void *)priv);
863 	} else
864 #endif
865 	free_irq(priv->pdev->irq, (void *)priv);
866 }
867 
868 static int
869 tsi721_obw_alloc(struct tsi721_device *priv, struct tsi721_obw_bar *pbar,
870 		 u32 size, int *win_id)
871 {
872 	u64 win_base;
873 	u64 bar_base;
874 	u64 bar_end;
875 	u32 align;
876 	struct tsi721_ob_win *win;
877 	struct tsi721_ob_win *new_win = NULL;
878 	int new_win_idx = -1;
879 	int i = 0;
880 
881 	bar_base = pbar->base;
882 	bar_end =  bar_base + pbar->size;
883 	win_base = bar_base;
884 	align = size/TSI721_PC2SR_ZONES;
885 
886 	while (i < TSI721_IBWIN_NUM) {
887 		for (i = 0; i < TSI721_IBWIN_NUM; i++) {
888 			if (!priv->ob_win[i].active) {
889 				if (new_win == NULL) {
890 					new_win = &priv->ob_win[i];
891 					new_win_idx = i;
892 				}
893 				continue;
894 			}
895 
896 			/*
897 			 * If this window belongs to the current BAR check it
898 			 * for overlap
899 			 */
900 			win = &priv->ob_win[i];
901 
902 			if (win->base >= bar_base && win->base < bar_end) {
903 				if (win_base < (win->base + win->size) &&
904 						(win_base + size) > win->base) {
905 					/* Overlap detected */
906 					win_base = win->base + win->size;
907 					win_base = ALIGN(win_base, align);
908 					break;
909 				}
910 			}
911 		}
912 	}
913 
914 	if (win_base + size > bar_end)
915 		return -ENOMEM;
916 
917 	if (!new_win) {
918 		tsi_err(&priv->pdev->dev, "OBW count tracking failed");
919 		return -EIO;
920 	}
921 
922 	new_win->active = true;
923 	new_win->base = win_base;
924 	new_win->size = size;
925 	new_win->pbar = pbar;
926 	priv->obwin_cnt--;
927 	pbar->free -= size;
928 	*win_id = new_win_idx;
929 	return 0;
930 }
931 
932 static int tsi721_map_outb_win(struct rio_mport *mport, u16 destid, u64 rstart,
933 			u32 size, u32 flags, dma_addr_t *laddr)
934 {
935 	struct tsi721_device *priv = mport->priv;
936 	int i;
937 	struct tsi721_obw_bar *pbar;
938 	struct tsi721_ob_win *ob_win;
939 	int obw = -1;
940 	u32 rval;
941 	u64 rio_addr;
942 	u32 zsize;
943 	int ret = -ENOMEM;
944 
945 	tsi_debug(OBW, &priv->pdev->dev,
946 		  "did=%d ra=0x%llx sz=0x%x", destid, rstart, size);
947 
948 	if (!is_power_of_2(size) || (size < 0x8000) || (rstart & (size - 1)))
949 		return -EINVAL;
950 
951 	if (priv->obwin_cnt == 0)
952 		return -EBUSY;
953 
954 	for (i = 0; i < 2; i++) {
955 		if (priv->p2r_bar[i].free >= size) {
956 			pbar = &priv->p2r_bar[i];
957 			ret = tsi721_obw_alloc(priv, pbar, size, &obw);
958 			if (!ret)
959 				break;
960 		}
961 	}
962 
963 	if (ret)
964 		return ret;
965 
966 	WARN_ON(obw == -1);
967 	ob_win = &priv->ob_win[obw];
968 	ob_win->destid = destid;
969 	ob_win->rstart = rstart;
970 	tsi_debug(OBW, &priv->pdev->dev,
971 		  "allocated OBW%d @%llx", obw, ob_win->base);
972 
973 	/*
974 	 * Configure Outbound Window
975 	 */
976 
977 	zsize = size/TSI721_PC2SR_ZONES;
978 	rio_addr = rstart;
979 
980 	/*
981 	 * Program Address Translation Zones:
982 	 *  This implementation uses all 8 zones associated wit window.
983 	 */
984 	for (i = 0; i < TSI721_PC2SR_ZONES; i++) {
985 
986 		while (ioread32(priv->regs + TSI721_ZONE_SEL) &
987 			TSI721_ZONE_SEL_GO) {
988 			udelay(1);
989 		}
990 
991 		rval = (u32)(rio_addr & TSI721_LUT_DATA0_ADD) |
992 			TSI721_LUT_DATA0_NREAD | TSI721_LUT_DATA0_NWR;
993 		iowrite32(rval, priv->regs + TSI721_LUT_DATA0);
994 		rval = (u32)(rio_addr >> 32);
995 		iowrite32(rval, priv->regs + TSI721_LUT_DATA1);
996 		rval = destid;
997 		iowrite32(rval, priv->regs + TSI721_LUT_DATA2);
998 
999 		rval = TSI721_ZONE_SEL_GO | (obw << 3) | i;
1000 		iowrite32(rval, priv->regs + TSI721_ZONE_SEL);
1001 
1002 		rio_addr += zsize;
1003 	}
1004 
1005 	iowrite32(TSI721_OBWIN_SIZE(size) << 8,
1006 		  priv->regs + TSI721_OBWINSZ(obw));
1007 	iowrite32((u32)(ob_win->base >> 32), priv->regs + TSI721_OBWINUB(obw));
1008 	iowrite32((u32)(ob_win->base & TSI721_OBWINLB_BA) | TSI721_OBWINLB_WEN,
1009 		  priv->regs + TSI721_OBWINLB(obw));
1010 
1011 	*laddr = ob_win->base;
1012 	return 0;
1013 }
1014 
1015 static void tsi721_unmap_outb_win(struct rio_mport *mport,
1016 				  u16 destid, u64 rstart)
1017 {
1018 	struct tsi721_device *priv = mport->priv;
1019 	struct tsi721_ob_win *ob_win;
1020 	int i;
1021 
1022 	tsi_debug(OBW, &priv->pdev->dev, "did=%d ra=0x%llx", destid, rstart);
1023 
1024 	for (i = 0; i < TSI721_OBWIN_NUM; i++) {
1025 		ob_win = &priv->ob_win[i];
1026 
1027 		if (ob_win->active &&
1028 		    ob_win->destid == destid && ob_win->rstart == rstart) {
1029 			tsi_debug(OBW, &priv->pdev->dev,
1030 				  "free OBW%d @%llx", i, ob_win->base);
1031 			ob_win->active = false;
1032 			iowrite32(0, priv->regs + TSI721_OBWINLB(i));
1033 			ob_win->pbar->free += ob_win->size;
1034 			priv->obwin_cnt++;
1035 			break;
1036 		}
1037 	}
1038 }
1039 
1040 /**
1041  * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO)
1042  * translation regions.
1043  * @priv: pointer to tsi721 private data
1044  *
1045  * Disables SREP translation regions.
1046  */
1047 static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv)
1048 {
1049 	int i, z;
1050 	u32 rval;
1051 
1052 	/* Disable all PC2SR translation windows */
1053 	for (i = 0; i < TSI721_OBWIN_NUM; i++)
1054 		iowrite32(0, priv->regs + TSI721_OBWINLB(i));
1055 
1056 	/* Initialize zone lookup tables to avoid ECC errors on reads */
1057 	iowrite32(0, priv->regs + TSI721_LUT_DATA0);
1058 	iowrite32(0, priv->regs + TSI721_LUT_DATA1);
1059 	iowrite32(0, priv->regs + TSI721_LUT_DATA2);
1060 
1061 	for (i = 0; i < TSI721_OBWIN_NUM; i++) {
1062 		for (z = 0; z < TSI721_PC2SR_ZONES; z++) {
1063 			while (ioread32(priv->regs + TSI721_ZONE_SEL) &
1064 				TSI721_ZONE_SEL_GO) {
1065 				udelay(1);
1066 			}
1067 			rval = TSI721_ZONE_SEL_GO | (i << 3) | z;
1068 			iowrite32(rval, priv->regs + TSI721_ZONE_SEL);
1069 		}
1070 	}
1071 
1072 	if (priv->p2r_bar[0].size == 0 && priv->p2r_bar[1].size == 0) {
1073 		priv->obwin_cnt = 0;
1074 		return;
1075 	}
1076 
1077 	priv->p2r_bar[0].free = priv->p2r_bar[0].size;
1078 	priv->p2r_bar[1].free = priv->p2r_bar[1].size;
1079 
1080 	for (i = 0; i < TSI721_OBWIN_NUM; i++)
1081 		priv->ob_win[i].active = false;
1082 
1083 	priv->obwin_cnt = TSI721_OBWIN_NUM;
1084 }
1085 
1086 /**
1087  * tsi721_rio_map_inb_mem -- Mapping inbound memory region.
1088  * @mport: RapidIO master port
1089  * @lstart: Local memory space start address.
1090  * @rstart: RapidIO space start address.
1091  * @size: The mapping region size.
1092  * @flags: Flags for mapping. 0 for using default flags.
1093  *
1094  * Return: 0 -- Success.
1095  *
1096  * This function will create the inbound mapping
1097  * from rstart to lstart.
1098  */
1099 static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
1100 		u64 rstart, u64 size, u32 flags)
1101 {
1102 	struct tsi721_device *priv = mport->priv;
1103 	int i, avail = -1;
1104 	u32 regval;
1105 	struct tsi721_ib_win *ib_win;
1106 	bool direct = (lstart == rstart);
1107 	u64 ibw_size;
1108 	dma_addr_t loc_start;
1109 	u64 ibw_start;
1110 	struct tsi721_ib_win_mapping *map = NULL;
1111 	int ret = -EBUSY;
1112 
1113 	/* Max IBW size supported by HW is 16GB */
1114 	if (size > 0x400000000UL)
1115 		return -EINVAL;
1116 
1117 	if (direct) {
1118 		/* Calculate minimal acceptable window size and base address */
1119 
1120 		ibw_size = roundup_pow_of_two(size);
1121 		ibw_start = lstart & ~(ibw_size - 1);
1122 
1123 		tsi_debug(IBW, &priv->pdev->dev,
1124 			"Direct (RIO_0x%llx -> PCIe_%pad), size=0x%llx, ibw_start = 0x%llx",
1125 			rstart, &lstart, size, ibw_start);
1126 
1127 		while ((lstart + size) > (ibw_start + ibw_size)) {
1128 			ibw_size *= 2;
1129 			ibw_start = lstart & ~(ibw_size - 1);
1130 			/* Check for crossing IBW max size 16GB */
1131 			if (ibw_size > 0x400000000UL)
1132 				return -EBUSY;
1133 		}
1134 
1135 		loc_start = ibw_start;
1136 
1137 		map = kzalloc(sizeof(struct tsi721_ib_win_mapping), GFP_ATOMIC);
1138 		if (map == NULL)
1139 			return -ENOMEM;
1140 
1141 	} else {
1142 		tsi_debug(IBW, &priv->pdev->dev,
1143 			"Translated (RIO_0x%llx -> PCIe_%pad), size=0x%llx",
1144 			rstart, &lstart, size);
1145 
1146 		if (!is_power_of_2(size) || size < 0x1000 ||
1147 		    ((u64)lstart & (size - 1)) || (rstart & (size - 1)))
1148 			return -EINVAL;
1149 		if (priv->ibwin_cnt == 0)
1150 			return -EBUSY;
1151 		ibw_start = rstart;
1152 		ibw_size = size;
1153 		loc_start = lstart;
1154 	}
1155 
1156 	/*
1157 	 * Scan for overlapping with active regions and mark the first available
1158 	 * IB window at the same time.
1159 	 */
1160 	for (i = 0; i < TSI721_IBWIN_NUM; i++) {
1161 		ib_win = &priv->ib_win[i];
1162 
1163 		if (!ib_win->active) {
1164 			if (avail == -1) {
1165 				avail = i;
1166 				ret = 0;
1167 			}
1168 		} else if (ibw_start < (ib_win->rstart + ib_win->size) &&
1169 			   (ibw_start + ibw_size) > ib_win->rstart) {
1170 			/* Return error if address translation involved */
1171 			if (!direct || ib_win->xlat) {
1172 				ret = -EFAULT;
1173 				break;
1174 			}
1175 
1176 			/*
1177 			 * Direct mappings usually are larger than originally
1178 			 * requested fragments - check if this new request fits
1179 			 * into it.
1180 			 */
1181 			if (rstart >= ib_win->rstart &&
1182 			    (rstart + size) <= (ib_win->rstart +
1183 							ib_win->size)) {
1184 				/* We are in - no further mapping required */
1185 				map->lstart = lstart;
1186 				list_add_tail(&map->node, &ib_win->mappings);
1187 				return 0;
1188 			}
1189 
1190 			ret = -EFAULT;
1191 			break;
1192 		}
1193 	}
1194 
1195 	if (ret)
1196 		goto out;
1197 	i = avail;
1198 
1199 	/* Sanity check: available IB window must be disabled at this point */
1200 	regval = ioread32(priv->regs + TSI721_IBWIN_LB(i));
1201 	if (WARN_ON(regval & TSI721_IBWIN_LB_WEN)) {
1202 		ret = -EIO;
1203 		goto out;
1204 	}
1205 
1206 	ib_win = &priv->ib_win[i];
1207 	ib_win->active = true;
1208 	ib_win->rstart = ibw_start;
1209 	ib_win->lstart = loc_start;
1210 	ib_win->size = ibw_size;
1211 	ib_win->xlat = (lstart != rstart);
1212 	INIT_LIST_HEAD(&ib_win->mappings);
1213 
1214 	/*
1215 	 * When using direct IBW mapping and have larger than requested IBW size
1216 	 * we can have multiple local memory blocks mapped through the same IBW
1217 	 * To handle this situation we maintain list of "clients" for such IBWs.
1218 	 */
1219 	if (direct) {
1220 		map->lstart = lstart;
1221 		list_add_tail(&map->node, &ib_win->mappings);
1222 	}
1223 
1224 	iowrite32(TSI721_IBWIN_SIZE(ibw_size) << 8,
1225 			priv->regs + TSI721_IBWIN_SZ(i));
1226 
1227 	iowrite32(((u64)loc_start >> 32), priv->regs + TSI721_IBWIN_TUA(i));
1228 	iowrite32(((u64)loc_start & TSI721_IBWIN_TLA_ADD),
1229 		  priv->regs + TSI721_IBWIN_TLA(i));
1230 
1231 	iowrite32(ibw_start >> 32, priv->regs + TSI721_IBWIN_UB(i));
1232 	iowrite32((ibw_start & TSI721_IBWIN_LB_BA) | TSI721_IBWIN_LB_WEN,
1233 		priv->regs + TSI721_IBWIN_LB(i));
1234 
1235 	priv->ibwin_cnt--;
1236 
1237 	tsi_debug(IBW, &priv->pdev->dev,
1238 		"Configured IBWIN%d (RIO_0x%llx -> PCIe_%pad), size=0x%llx",
1239 		i, ibw_start, &loc_start, ibw_size);
1240 
1241 	return 0;
1242 out:
1243 	kfree(map);
1244 	return ret;
1245 }
1246 
1247 /**
1248  * tsi721_rio_unmap_inb_mem -- Unmapping inbound memory region.
1249  * @mport: RapidIO master port
1250  * @lstart: Local memory space start address.
1251  */
1252 static void tsi721_rio_unmap_inb_mem(struct rio_mport *mport,
1253 				dma_addr_t lstart)
1254 {
1255 	struct tsi721_device *priv = mport->priv;
1256 	struct tsi721_ib_win *ib_win;
1257 	int i;
1258 
1259 	tsi_debug(IBW, &priv->pdev->dev,
1260 		"Unmap IBW mapped to PCIe_%pad", &lstart);
1261 
1262 	/* Search for matching active inbound translation window */
1263 	for (i = 0; i < TSI721_IBWIN_NUM; i++) {
1264 		ib_win = &priv->ib_win[i];
1265 
1266 		/* Address translating IBWs must to be an exact march */
1267 		if (!ib_win->active ||
1268 		    (ib_win->xlat && lstart != ib_win->lstart))
1269 			continue;
1270 
1271 		if (lstart >= ib_win->lstart &&
1272 		    lstart < (ib_win->lstart + ib_win->size)) {
1273 
1274 			if (!ib_win->xlat) {
1275 				struct tsi721_ib_win_mapping *map;
1276 				int found = 0;
1277 
1278 				list_for_each_entry(map,
1279 						    &ib_win->mappings, node) {
1280 					if (map->lstart == lstart) {
1281 						list_del(&map->node);
1282 						kfree(map);
1283 						found = 1;
1284 						break;
1285 					}
1286 				}
1287 
1288 				if (!found)
1289 					continue;
1290 
1291 				if (!list_empty(&ib_win->mappings))
1292 					break;
1293 			}
1294 
1295 			tsi_debug(IBW, &priv->pdev->dev, "Disable IBWIN_%d", i);
1296 			iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
1297 			ib_win->active = false;
1298 			priv->ibwin_cnt++;
1299 			break;
1300 		}
1301 	}
1302 
1303 	if (i == TSI721_IBWIN_NUM)
1304 		tsi_debug(IBW, &priv->pdev->dev,
1305 			"IB window mapped to %pad not found", &lstart);
1306 }
1307 
1308 /**
1309  * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe)
1310  * translation regions.
1311  * @priv: pointer to tsi721 private data
1312  *
1313  * Disables inbound windows.
1314  */
1315 static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv)
1316 {
1317 	int i;
1318 
1319 	/* Disable all SR2PC inbound windows */
1320 	for (i = 0; i < TSI721_IBWIN_NUM; i++)
1321 		iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
1322 	priv->ibwin_cnt = TSI721_IBWIN_NUM;
1323 }
1324 
1325 /*
1326  * tsi721_close_sr2pc_mapping - closes all active inbound (SRIO->PCIe)
1327  * translation regions.
1328  * @priv: pointer to tsi721 device private data
1329  */
1330 static void tsi721_close_sr2pc_mapping(struct tsi721_device *priv)
1331 {
1332 	struct tsi721_ib_win *ib_win;
1333 	int i;
1334 
1335 	/* Disable all active SR2PC inbound windows */
1336 	for (i = 0; i < TSI721_IBWIN_NUM; i++) {
1337 		ib_win = &priv->ib_win[i];
1338 		if (ib_win->active) {
1339 			iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
1340 			ib_win->active = false;
1341 		}
1342 	}
1343 }
1344 
1345 /**
1346  * tsi721_port_write_init - Inbound port write interface init
1347  * @priv: pointer to tsi721 private data
1348  *
1349  * Initializes inbound port write handler.
1350  * Returns %0 on success or %-ENOMEM on failure.
1351  */
1352 static int tsi721_port_write_init(struct tsi721_device *priv)
1353 {
1354 	priv->pw_discard_count = 0;
1355 	INIT_WORK(&priv->pw_work, tsi721_pw_dpc);
1356 	spin_lock_init(&priv->pw_fifo_lock);
1357 	if (kfifo_alloc(&priv->pw_fifo,
1358 			TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
1359 		tsi_err(&priv->pdev->dev, "PW FIFO allocation failed");
1360 		return -ENOMEM;
1361 	}
1362 
1363 	/* Use reliable port-write capture mode */
1364 	iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL);
1365 	return 0;
1366 }
1367 
1368 static void tsi721_port_write_free(struct tsi721_device *priv)
1369 {
1370 	kfifo_free(&priv->pw_fifo);
1371 }
1372 
1373 static int tsi721_doorbell_init(struct tsi721_device *priv)
1374 {
1375 	/* Outbound Doorbells do not require any setup.
1376 	 * Tsi721 uses dedicated PCI BAR1 to generate doorbells.
1377 	 * That BAR1 was mapped during the probe routine.
1378 	 */
1379 
1380 	/* Initialize Inbound Doorbell processing DPC and queue */
1381 	priv->db_discard_count = 0;
1382 	INIT_WORK(&priv->idb_work, tsi721_db_dpc);
1383 
1384 	/* Allocate buffer for inbound doorbells queue */
1385 	priv->idb_base = dma_zalloc_coherent(&priv->pdev->dev,
1386 				IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
1387 				&priv->idb_dma, GFP_KERNEL);
1388 	if (!priv->idb_base)
1389 		return -ENOMEM;
1390 
1391 	tsi_debug(DBELL, &priv->pdev->dev,
1392 		  "Allocated IDB buffer @ %p (phys = %pad)",
1393 		  priv->idb_base, &priv->idb_dma);
1394 
1395 	iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE),
1396 		priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE));
1397 	iowrite32(((u64)priv->idb_dma >> 32),
1398 		priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE));
1399 	iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR),
1400 		priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE));
1401 	/* Enable accepting all inbound doorbells */
1402 	iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE));
1403 
1404 	iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE));
1405 
1406 	iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
1407 
1408 	return 0;
1409 }
1410 
1411 static void tsi721_doorbell_free(struct tsi721_device *priv)
1412 {
1413 	if (priv->idb_base == NULL)
1414 		return;
1415 
1416 	/* Free buffer allocated for inbound doorbell queue */
1417 	dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
1418 			  priv->idb_base, priv->idb_dma);
1419 	priv->idb_base = NULL;
1420 }
1421 
1422 /**
1423  * tsi721_bdma_maint_init - Initialize maintenance request BDMA channel.
1424  * @priv: pointer to tsi721 private data
1425  *
1426  * Initialize BDMA channel allocated for RapidIO maintenance read/write
1427  * request generation
1428  * Returns %0 on success or %-ENOMEM on failure.
1429  */
1430 static int tsi721_bdma_maint_init(struct tsi721_device *priv)
1431 {
1432 	struct tsi721_dma_desc *bd_ptr;
1433 	u64		*sts_ptr;
1434 	dma_addr_t	bd_phys, sts_phys;
1435 	int		sts_size;
1436 	int		bd_num = 2;
1437 	void __iomem	*regs;
1438 
1439 	tsi_debug(MAINT, &priv->pdev->dev,
1440 		  "Init BDMA_%d Maintenance requests", TSI721_DMACH_MAINT);
1441 
1442 	/*
1443 	 * Initialize DMA channel for maintenance requests
1444 	 */
1445 
1446 	priv->mdma.ch_id = TSI721_DMACH_MAINT;
1447 	regs = priv->regs + TSI721_DMAC_BASE(TSI721_DMACH_MAINT);
1448 
1449 	/* Allocate space for DMA descriptors */
1450 	bd_ptr = dma_zalloc_coherent(&priv->pdev->dev,
1451 					bd_num * sizeof(struct tsi721_dma_desc),
1452 					&bd_phys, GFP_KERNEL);
1453 	if (!bd_ptr)
1454 		return -ENOMEM;
1455 
1456 	priv->mdma.bd_num = bd_num;
1457 	priv->mdma.bd_phys = bd_phys;
1458 	priv->mdma.bd_base = bd_ptr;
1459 
1460 	tsi_debug(MAINT, &priv->pdev->dev, "DMA descriptors @ %p (phys = %pad)",
1461 		  bd_ptr, &bd_phys);
1462 
1463 	/* Allocate space for descriptor status FIFO */
1464 	sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ?
1465 					bd_num : TSI721_DMA_MINSTSSZ;
1466 	sts_size = roundup_pow_of_two(sts_size);
1467 	sts_ptr = dma_zalloc_coherent(&priv->pdev->dev,
1468 				     sts_size * sizeof(struct tsi721_dma_sts),
1469 				     &sts_phys, GFP_KERNEL);
1470 	if (!sts_ptr) {
1471 		/* Free space allocated for DMA descriptors */
1472 		dma_free_coherent(&priv->pdev->dev,
1473 				  bd_num * sizeof(struct tsi721_dma_desc),
1474 				  bd_ptr, bd_phys);
1475 		priv->mdma.bd_base = NULL;
1476 		return -ENOMEM;
1477 	}
1478 
1479 	priv->mdma.sts_phys = sts_phys;
1480 	priv->mdma.sts_base = sts_ptr;
1481 	priv->mdma.sts_size = sts_size;
1482 
1483 	tsi_debug(MAINT, &priv->pdev->dev,
1484 		"desc status FIFO @ %p (phys = %pad) size=0x%x",
1485 		sts_ptr, &sts_phys, sts_size);
1486 
1487 	/* Initialize DMA descriptors ring */
1488 	bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29);
1489 	bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys &
1490 						 TSI721_DMAC_DPTRL_MASK);
1491 	bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32);
1492 
1493 	/* Setup DMA descriptor pointers */
1494 	iowrite32(((u64)bd_phys >> 32),	regs + TSI721_DMAC_DPTRH);
1495 	iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
1496 		regs + TSI721_DMAC_DPTRL);
1497 
1498 	/* Setup descriptor status FIFO */
1499 	iowrite32(((u64)sts_phys >> 32), regs + TSI721_DMAC_DSBH);
1500 	iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
1501 		regs + TSI721_DMAC_DSBL);
1502 	iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
1503 		regs + TSI721_DMAC_DSSZ);
1504 
1505 	/* Clear interrupt bits */
1506 	iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
1507 
1508 	ioread32(regs + TSI721_DMAC_INT);
1509 
1510 	/* Toggle DMA channel initialization */
1511 	iowrite32(TSI721_DMAC_CTL_INIT,	regs + TSI721_DMAC_CTL);
1512 	ioread32(regs + TSI721_DMAC_CTL);
1513 	udelay(10);
1514 
1515 	return 0;
1516 }
1517 
1518 static int tsi721_bdma_maint_free(struct tsi721_device *priv)
1519 {
1520 	u32 ch_stat;
1521 	struct tsi721_bdma_maint *mdma = &priv->mdma;
1522 	void __iomem *regs = priv->regs + TSI721_DMAC_BASE(mdma->ch_id);
1523 
1524 	if (mdma->bd_base == NULL)
1525 		return 0;
1526 
1527 	/* Check if DMA channel still running */
1528 	ch_stat = ioread32(regs + TSI721_DMAC_STS);
1529 	if (ch_stat & TSI721_DMAC_STS_RUN)
1530 		return -EFAULT;
1531 
1532 	/* Put DMA channel into init state */
1533 	iowrite32(TSI721_DMAC_CTL_INIT,	regs + TSI721_DMAC_CTL);
1534 
1535 	/* Free space allocated for DMA descriptors */
1536 	dma_free_coherent(&priv->pdev->dev,
1537 		mdma->bd_num * sizeof(struct tsi721_dma_desc),
1538 		mdma->bd_base, mdma->bd_phys);
1539 	mdma->bd_base = NULL;
1540 
1541 	/* Free space allocated for status FIFO */
1542 	dma_free_coherent(&priv->pdev->dev,
1543 		mdma->sts_size * sizeof(struct tsi721_dma_sts),
1544 		mdma->sts_base, mdma->sts_phys);
1545 	mdma->sts_base = NULL;
1546 	return 0;
1547 }
1548 
1549 /* Enable Inbound Messaging Interrupts */
1550 static void
1551 tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch,
1552 				  u32 inte_mask)
1553 {
1554 	u32 rval;
1555 
1556 	if (!inte_mask)
1557 		return;
1558 
1559 	/* Clear pending Inbound Messaging interrupts */
1560 	iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
1561 
1562 	/* Enable Inbound Messaging interrupts */
1563 	rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
1564 	iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch));
1565 
1566 	if (priv->flags & TSI721_USING_MSIX)
1567 		return; /* Finished if we are in MSI-X mode */
1568 
1569 	/*
1570 	 * For MSI and INTA interrupt signalling we need to enable next levels
1571 	 */
1572 
1573 	/* Enable Device Channel Interrupt */
1574 	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1575 	iowrite32(rval | TSI721_INT_IMSG_CHAN(ch),
1576 		  priv->regs + TSI721_DEV_CHAN_INTE);
1577 }
1578 
1579 /* Disable Inbound Messaging Interrupts */
1580 static void
1581 tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch,
1582 				   u32 inte_mask)
1583 {
1584 	u32 rval;
1585 
1586 	if (!inte_mask)
1587 		return;
1588 
1589 	/* Clear pending Inbound Messaging interrupts */
1590 	iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
1591 
1592 	/* Disable Inbound Messaging interrupts */
1593 	rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
1594 	rval &= ~inte_mask;
1595 	iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch));
1596 
1597 	if (priv->flags & TSI721_USING_MSIX)
1598 		return; /* Finished if we are in MSI-X mode */
1599 
1600 	/*
1601 	 * For MSI and INTA interrupt signalling we need to disable next levels
1602 	 */
1603 
1604 	/* Disable Device Channel Interrupt */
1605 	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1606 	rval &= ~TSI721_INT_IMSG_CHAN(ch);
1607 	iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
1608 }
1609 
1610 /* Enable Outbound Messaging interrupts */
1611 static void
1612 tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch,
1613 				  u32 inte_mask)
1614 {
1615 	u32 rval;
1616 
1617 	if (!inte_mask)
1618 		return;
1619 
1620 	/* Clear pending Outbound Messaging interrupts */
1621 	iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
1622 
1623 	/* Enable Outbound Messaging channel interrupts */
1624 	rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
1625 	iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch));
1626 
1627 	if (priv->flags & TSI721_USING_MSIX)
1628 		return; /* Finished if we are in MSI-X mode */
1629 
1630 	/*
1631 	 * For MSI and INTA interrupt signalling we need to enable next levels
1632 	 */
1633 
1634 	/* Enable Device Channel Interrupt */
1635 	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1636 	iowrite32(rval | TSI721_INT_OMSG_CHAN(ch),
1637 		  priv->regs + TSI721_DEV_CHAN_INTE);
1638 }
1639 
1640 /* Disable Outbound Messaging interrupts */
1641 static void
1642 tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch,
1643 				   u32 inte_mask)
1644 {
1645 	u32 rval;
1646 
1647 	if (!inte_mask)
1648 		return;
1649 
1650 	/* Clear pending Outbound Messaging interrupts */
1651 	iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
1652 
1653 	/* Disable Outbound Messaging interrupts */
1654 	rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
1655 	rval &= ~inte_mask;
1656 	iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch));
1657 
1658 	if (priv->flags & TSI721_USING_MSIX)
1659 		return; /* Finished if we are in MSI-X mode */
1660 
1661 	/*
1662 	 * For MSI and INTA interrupt signalling we need to disable next levels
1663 	 */
1664 
1665 	/* Disable Device Channel Interrupt */
1666 	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1667 	rval &= ~TSI721_INT_OMSG_CHAN(ch);
1668 	iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
1669 }
1670 
1671 /**
1672  * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue
1673  * @mport: Master port with outbound message queue
1674  * @rdev: Target of outbound message
1675  * @mbox: Outbound mailbox
1676  * @buffer: Message to add to outbound queue
1677  * @len: Length of message
1678  */
1679 static int
1680 tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
1681 			void *buffer, size_t len)
1682 {
1683 	struct tsi721_device *priv = mport->priv;
1684 	struct tsi721_omsg_desc *desc;
1685 	u32 tx_slot;
1686 	unsigned long flags;
1687 
1688 	if (!priv->omsg_init[mbox] ||
1689 	    len > TSI721_MSG_MAX_SIZE || len < 8)
1690 		return -EINVAL;
1691 
1692 	spin_lock_irqsave(&priv->omsg_ring[mbox].lock, flags);
1693 
1694 	tx_slot = priv->omsg_ring[mbox].tx_slot;
1695 
1696 	/* Copy copy message into transfer buffer */
1697 	memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len);
1698 
1699 	if (len & 0x7)
1700 		len += 8;
1701 
1702 	/* Build descriptor associated with buffer */
1703 	desc = priv->omsg_ring[mbox].omd_base;
1704 	desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid);
1705 #ifdef TSI721_OMSG_DESC_INT
1706 	/* Request IOF_DONE interrupt generation for each N-th frame in queue */
1707 	if (tx_slot % 4 == 0)
1708 		desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF);
1709 #endif
1710 	desc[tx_slot].msg_info =
1711 		cpu_to_le32((mport->sys_size << 26) | (mbox << 22) |
1712 			    (0xe << 12) | (len & 0xff8));
1713 	desc[tx_slot].bufptr_lo =
1714 		cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] &
1715 			    0xffffffff);
1716 	desc[tx_slot].bufptr_hi =
1717 		cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32);
1718 
1719 	priv->omsg_ring[mbox].wr_count++;
1720 
1721 	/* Go to next descriptor */
1722 	if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) {
1723 		priv->omsg_ring[mbox].tx_slot = 0;
1724 		/* Move through the ring link descriptor at the end */
1725 		priv->omsg_ring[mbox].wr_count++;
1726 	}
1727 
1728 	mb();
1729 
1730 	/* Set new write count value */
1731 	iowrite32(priv->omsg_ring[mbox].wr_count,
1732 		priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
1733 	ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
1734 
1735 	spin_unlock_irqrestore(&priv->omsg_ring[mbox].lock, flags);
1736 
1737 	return 0;
1738 }
1739 
1740 /**
1741  * tsi721_omsg_handler - Outbound Message Interrupt Handler
1742  * @priv: pointer to tsi721 private data
1743  * @ch:   number of OB MSG channel to service
1744  *
1745  * Services channel interrupts from outbound messaging engine.
1746  */
1747 static void tsi721_omsg_handler(struct tsi721_device *priv, int ch)
1748 {
1749 	u32 omsg_int;
1750 	struct rio_mport *mport = &priv->mport;
1751 	void *dev_id = NULL;
1752 	u32 tx_slot = 0xffffffff;
1753 	int do_callback = 0;
1754 
1755 	spin_lock(&priv->omsg_ring[ch].lock);
1756 
1757 	omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch));
1758 
1759 	if (omsg_int & TSI721_OBDMAC_INT_ST_FULL)
1760 		tsi_info(&priv->pdev->dev,
1761 			"OB MBOX%d: Status FIFO is full", ch);
1762 
1763 	if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) {
1764 		u32 srd_ptr;
1765 		u64 *sts_ptr, last_ptr = 0, prev_ptr = 0;
1766 		int i, j;
1767 
1768 		/*
1769 		 * Find last successfully processed descriptor
1770 		 */
1771 
1772 		/* Check and clear descriptor status FIFO entries */
1773 		srd_ptr = priv->omsg_ring[ch].sts_rdptr;
1774 		sts_ptr = priv->omsg_ring[ch].sts_base;
1775 		j = srd_ptr * 8;
1776 		while (sts_ptr[j]) {
1777 			for (i = 0; i < 8 && sts_ptr[j]; i++, j++) {
1778 				prev_ptr = last_ptr;
1779 				last_ptr = le64_to_cpu(sts_ptr[j]);
1780 				sts_ptr[j] = 0;
1781 			}
1782 
1783 			++srd_ptr;
1784 			srd_ptr %= priv->omsg_ring[ch].sts_size;
1785 			j = srd_ptr * 8;
1786 		}
1787 
1788 		if (last_ptr == 0)
1789 			goto no_sts_update;
1790 
1791 		priv->omsg_ring[ch].sts_rdptr = srd_ptr;
1792 		iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch));
1793 
1794 		if (!mport->outb_msg[ch].mcback)
1795 			goto no_sts_update;
1796 
1797 		/* Inform upper layer about transfer completion */
1798 
1799 		tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/
1800 						sizeof(struct tsi721_omsg_desc);
1801 
1802 		/*
1803 		 * Check if this is a Link Descriptor (LD).
1804 		 * If yes, ignore LD and use descriptor processed
1805 		 * before LD.
1806 		 */
1807 		if (tx_slot == priv->omsg_ring[ch].size) {
1808 			if (prev_ptr)
1809 				tx_slot = (prev_ptr -
1810 					(u64)priv->omsg_ring[ch].omd_phys)/
1811 						sizeof(struct tsi721_omsg_desc);
1812 			else
1813 				goto no_sts_update;
1814 		}
1815 
1816 		if (tx_slot >= priv->omsg_ring[ch].size)
1817 			tsi_debug(OMSG, &priv->pdev->dev,
1818 				  "OB_MSG tx_slot=%x > size=%x",
1819 				  tx_slot, priv->omsg_ring[ch].size);
1820 		WARN_ON(tx_slot >= priv->omsg_ring[ch].size);
1821 
1822 		/* Move slot index to the next message to be sent */
1823 		++tx_slot;
1824 		if (tx_slot == priv->omsg_ring[ch].size)
1825 			tx_slot = 0;
1826 
1827 		dev_id = priv->omsg_ring[ch].dev_id;
1828 		do_callback = 1;
1829 	}
1830 
1831 no_sts_update:
1832 
1833 	if (omsg_int & TSI721_OBDMAC_INT_ERROR) {
1834 		/*
1835 		* Outbound message operation aborted due to error,
1836 		* reinitialize OB MSG channel
1837 		*/
1838 
1839 		tsi_debug(OMSG, &priv->pdev->dev, "OB MSG ABORT ch_stat=%x",
1840 			  ioread32(priv->regs + TSI721_OBDMAC_STS(ch)));
1841 
1842 		iowrite32(TSI721_OBDMAC_INT_ERROR,
1843 				priv->regs + TSI721_OBDMAC_INT(ch));
1844 		iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT,
1845 				priv->regs + TSI721_OBDMAC_CTL(ch));
1846 		ioread32(priv->regs + TSI721_OBDMAC_CTL(ch));
1847 
1848 		/* Inform upper level to clear all pending tx slots */
1849 		dev_id = priv->omsg_ring[ch].dev_id;
1850 		tx_slot = priv->omsg_ring[ch].tx_slot;
1851 		do_callback = 1;
1852 
1853 		/* Synch tx_slot tracking */
1854 		iowrite32(priv->omsg_ring[ch].tx_slot,
1855 			priv->regs + TSI721_OBDMAC_DRDCNT(ch));
1856 		ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch));
1857 		priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot;
1858 		priv->omsg_ring[ch].sts_rdptr = 0;
1859 	}
1860 
1861 	/* Clear channel interrupts */
1862 	iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch));
1863 
1864 	if (!(priv->flags & TSI721_USING_MSIX)) {
1865 		u32 ch_inte;
1866 
1867 		/* Re-enable channel interrupts */
1868 		ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1869 		ch_inte |= TSI721_INT_OMSG_CHAN(ch);
1870 		iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
1871 	}
1872 
1873 	spin_unlock(&priv->omsg_ring[ch].lock);
1874 
1875 	if (mport->outb_msg[ch].mcback && do_callback)
1876 		mport->outb_msg[ch].mcback(mport, dev_id, ch, tx_slot);
1877 }
1878 
1879 /**
1880  * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox
1881  * @mport: Master port implementing Outbound Messaging Engine
1882  * @dev_id: Device specific pointer to pass on event
1883  * @mbox: Mailbox to open
1884  * @entries: Number of entries in the outbound mailbox ring
1885  */
1886 static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id,
1887 				 int mbox, int entries)
1888 {
1889 	struct tsi721_device *priv = mport->priv;
1890 	struct tsi721_omsg_desc *bd_ptr;
1891 	int i, rc = 0;
1892 
1893 	if ((entries < TSI721_OMSGD_MIN_RING_SIZE) ||
1894 	    (entries > (TSI721_OMSGD_RING_SIZE)) ||
1895 	    (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
1896 		rc = -EINVAL;
1897 		goto out;
1898 	}
1899 
1900 	if ((mbox_sel & (1 << mbox)) == 0) {
1901 		rc = -ENODEV;
1902 		goto out;
1903 	}
1904 
1905 	priv->omsg_ring[mbox].dev_id = dev_id;
1906 	priv->omsg_ring[mbox].size = entries;
1907 	priv->omsg_ring[mbox].sts_rdptr = 0;
1908 	spin_lock_init(&priv->omsg_ring[mbox].lock);
1909 
1910 	/* Outbound Msg Buffer allocation based on
1911 	   the number of maximum descriptor entries */
1912 	for (i = 0; i < entries; i++) {
1913 		priv->omsg_ring[mbox].omq_base[i] =
1914 			dma_alloc_coherent(
1915 				&priv->pdev->dev, TSI721_MSG_BUFFER_SIZE,
1916 				&priv->omsg_ring[mbox].omq_phys[i],
1917 				GFP_KERNEL);
1918 		if (priv->omsg_ring[mbox].omq_base[i] == NULL) {
1919 			tsi_debug(OMSG, &priv->pdev->dev,
1920 				  "ENOMEM for OB_MSG_%d data buffer", mbox);
1921 			rc = -ENOMEM;
1922 			goto out_buf;
1923 		}
1924 	}
1925 
1926 	/* Outbound message descriptor allocation */
1927 	priv->omsg_ring[mbox].omd_base = dma_alloc_coherent(
1928 				&priv->pdev->dev,
1929 				(entries + 1) * sizeof(struct tsi721_omsg_desc),
1930 				&priv->omsg_ring[mbox].omd_phys, GFP_KERNEL);
1931 	if (priv->omsg_ring[mbox].omd_base == NULL) {
1932 		tsi_debug(OMSG, &priv->pdev->dev,
1933 			"ENOMEM for OB_MSG_%d descriptor memory", mbox);
1934 		rc = -ENOMEM;
1935 		goto out_buf;
1936 	}
1937 
1938 	priv->omsg_ring[mbox].tx_slot = 0;
1939 
1940 	/* Outbound message descriptor status FIFO allocation */
1941 	priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1);
1942 	priv->omsg_ring[mbox].sts_base = dma_zalloc_coherent(&priv->pdev->dev,
1943 			priv->omsg_ring[mbox].sts_size *
1944 						sizeof(struct tsi721_dma_sts),
1945 			&priv->omsg_ring[mbox].sts_phys, GFP_KERNEL);
1946 	if (priv->omsg_ring[mbox].sts_base == NULL) {
1947 		tsi_debug(OMSG, &priv->pdev->dev,
1948 			"ENOMEM for OB_MSG_%d status FIFO", mbox);
1949 		rc = -ENOMEM;
1950 		goto out_desc;
1951 	}
1952 
1953 	/*
1954 	 * Configure Outbound Messaging Engine
1955 	 */
1956 
1957 	/* Setup Outbound Message descriptor pointer */
1958 	iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32),
1959 			priv->regs + TSI721_OBDMAC_DPTRH(mbox));
1960 	iowrite32(((u64)priv->omsg_ring[mbox].omd_phys &
1961 					TSI721_OBDMAC_DPTRL_MASK),
1962 			priv->regs + TSI721_OBDMAC_DPTRL(mbox));
1963 
1964 	/* Setup Outbound Message descriptor status FIFO */
1965 	iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32),
1966 			priv->regs + TSI721_OBDMAC_DSBH(mbox));
1967 	iowrite32(((u64)priv->omsg_ring[mbox].sts_phys &
1968 					TSI721_OBDMAC_DSBL_MASK),
1969 			priv->regs + TSI721_OBDMAC_DSBL(mbox));
1970 	iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size),
1971 		priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox));
1972 
1973 	/* Enable interrupts */
1974 
1975 #ifdef CONFIG_PCI_MSI
1976 	if (priv->flags & TSI721_USING_MSIX) {
1977 		int idx = TSI721_VECT_OMB0_DONE + mbox;
1978 
1979 		/* Request interrupt service if we are in MSI-X mode */
1980 		rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0,
1981 				 priv->msix[idx].irq_name, (void *)priv);
1982 
1983 		if (rc) {
1984 			tsi_debug(OMSG, &priv->pdev->dev,
1985 				"Unable to get MSI-X IRQ for OBOX%d-DONE",
1986 				mbox);
1987 			goto out_stat;
1988 		}
1989 
1990 		idx = TSI721_VECT_OMB0_INT + mbox;
1991 		rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0,
1992 				 priv->msix[idx].irq_name, (void *)priv);
1993 
1994 		if (rc)	{
1995 			tsi_debug(OMSG, &priv->pdev->dev,
1996 				"Unable to get MSI-X IRQ for MBOX%d-INT", mbox);
1997 			idx = TSI721_VECT_OMB0_DONE + mbox;
1998 			free_irq(priv->msix[idx].vector, (void *)priv);
1999 			goto out_stat;
2000 		}
2001 	}
2002 #endif /* CONFIG_PCI_MSI */
2003 
2004 	tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL);
2005 
2006 	/* Initialize Outbound Message descriptors ring */
2007 	bd_ptr = priv->omsg_ring[mbox].omd_base;
2008 	bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29);
2009 	bd_ptr[entries].msg_info = 0;
2010 	bd_ptr[entries].next_lo =
2011 		cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys &
2012 		TSI721_OBDMAC_DPTRL_MASK);
2013 	bd_ptr[entries].next_hi =
2014 		cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32);
2015 	priv->omsg_ring[mbox].wr_count = 0;
2016 	mb();
2017 
2018 	/* Initialize Outbound Message engine */
2019 	iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT,
2020 		  priv->regs + TSI721_OBDMAC_CTL(mbox));
2021 	ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
2022 	udelay(10);
2023 
2024 	priv->omsg_init[mbox] = 1;
2025 
2026 	return 0;
2027 
2028 #ifdef CONFIG_PCI_MSI
2029 out_stat:
2030 	dma_free_coherent(&priv->pdev->dev,
2031 		priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
2032 		priv->omsg_ring[mbox].sts_base,
2033 		priv->omsg_ring[mbox].sts_phys);
2034 
2035 	priv->omsg_ring[mbox].sts_base = NULL;
2036 #endif /* CONFIG_PCI_MSI */
2037 
2038 out_desc:
2039 	dma_free_coherent(&priv->pdev->dev,
2040 		(entries + 1) * sizeof(struct tsi721_omsg_desc),
2041 		priv->omsg_ring[mbox].omd_base,
2042 		priv->omsg_ring[mbox].omd_phys);
2043 
2044 	priv->omsg_ring[mbox].omd_base = NULL;
2045 
2046 out_buf:
2047 	for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
2048 		if (priv->omsg_ring[mbox].omq_base[i]) {
2049 			dma_free_coherent(&priv->pdev->dev,
2050 				TSI721_MSG_BUFFER_SIZE,
2051 				priv->omsg_ring[mbox].omq_base[i],
2052 				priv->omsg_ring[mbox].omq_phys[i]);
2053 
2054 			priv->omsg_ring[mbox].omq_base[i] = NULL;
2055 		}
2056 	}
2057 
2058 out:
2059 	return rc;
2060 }
2061 
2062 /**
2063  * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox
2064  * @mport: Master port implementing the outbound message unit
2065  * @mbox: Mailbox to close
2066  */
2067 static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox)
2068 {
2069 	struct tsi721_device *priv = mport->priv;
2070 	u32 i;
2071 
2072 	if (!priv->omsg_init[mbox])
2073 		return;
2074 	priv->omsg_init[mbox] = 0;
2075 
2076 	/* Disable Interrupts */
2077 
2078 	tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL);
2079 
2080 #ifdef CONFIG_PCI_MSI
2081 	if (priv->flags & TSI721_USING_MSIX) {
2082 		free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
2083 			 (void *)priv);
2084 		free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
2085 			 (void *)priv);
2086 	}
2087 #endif /* CONFIG_PCI_MSI */
2088 
2089 	/* Free OMSG Descriptor Status FIFO */
2090 	dma_free_coherent(&priv->pdev->dev,
2091 		priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
2092 		priv->omsg_ring[mbox].sts_base,
2093 		priv->omsg_ring[mbox].sts_phys);
2094 
2095 	priv->omsg_ring[mbox].sts_base = NULL;
2096 
2097 	/* Free OMSG descriptors */
2098 	dma_free_coherent(&priv->pdev->dev,
2099 		(priv->omsg_ring[mbox].size + 1) *
2100 			sizeof(struct tsi721_omsg_desc),
2101 		priv->omsg_ring[mbox].omd_base,
2102 		priv->omsg_ring[mbox].omd_phys);
2103 
2104 	priv->omsg_ring[mbox].omd_base = NULL;
2105 
2106 	/* Free message buffers */
2107 	for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
2108 		if (priv->omsg_ring[mbox].omq_base[i]) {
2109 			dma_free_coherent(&priv->pdev->dev,
2110 				TSI721_MSG_BUFFER_SIZE,
2111 				priv->omsg_ring[mbox].omq_base[i],
2112 				priv->omsg_ring[mbox].omq_phys[i]);
2113 
2114 			priv->omsg_ring[mbox].omq_base[i] = NULL;
2115 		}
2116 	}
2117 }
2118 
2119 /**
2120  * tsi721_imsg_handler - Inbound Message Interrupt Handler
2121  * @priv: pointer to tsi721 private data
2122  * @ch: inbound message channel number to service
2123  *
2124  * Services channel interrupts from inbound messaging engine.
2125  */
2126 static void tsi721_imsg_handler(struct tsi721_device *priv, int ch)
2127 {
2128 	u32 mbox = ch - 4;
2129 	u32 imsg_int;
2130 	struct rio_mport *mport = &priv->mport;
2131 
2132 	spin_lock(&priv->imsg_ring[mbox].lock);
2133 
2134 	imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch));
2135 
2136 	if (imsg_int & TSI721_IBDMAC_INT_SRTO)
2137 		tsi_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout", mbox);
2138 
2139 	if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR)
2140 		tsi_info(&priv->pdev->dev, "IB MBOX%d PCIe error", mbox);
2141 
2142 	if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW)
2143 		tsi_info(&priv->pdev->dev, "IB MBOX%d IB free queue low", mbox);
2144 
2145 	/* Clear IB channel interrupts */
2146 	iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch));
2147 
2148 	/* If an IB Msg is received notify the upper layer */
2149 	if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV &&
2150 		mport->inb_msg[mbox].mcback)
2151 		mport->inb_msg[mbox].mcback(mport,
2152 				priv->imsg_ring[mbox].dev_id, mbox, -1);
2153 
2154 	if (!(priv->flags & TSI721_USING_MSIX)) {
2155 		u32 ch_inte;
2156 
2157 		/* Re-enable channel interrupts */
2158 		ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
2159 		ch_inte |= TSI721_INT_IMSG_CHAN(ch);
2160 		iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
2161 	}
2162 
2163 	spin_unlock(&priv->imsg_ring[mbox].lock);
2164 }
2165 
2166 /**
2167  * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox
2168  * @mport: Master port implementing the Inbound Messaging Engine
2169  * @dev_id: Device specific pointer to pass on event
2170  * @mbox: Mailbox to open
2171  * @entries: Number of entries in the inbound mailbox ring
2172  */
2173 static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id,
2174 				int mbox, int entries)
2175 {
2176 	struct tsi721_device *priv = mport->priv;
2177 	int ch = mbox + 4;
2178 	int i;
2179 	u64 *free_ptr;
2180 	int rc = 0;
2181 
2182 	if ((entries < TSI721_IMSGD_MIN_RING_SIZE) ||
2183 	    (entries > TSI721_IMSGD_RING_SIZE) ||
2184 	    (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
2185 		rc = -EINVAL;
2186 		goto out;
2187 	}
2188 
2189 	if ((mbox_sel & (1 << mbox)) == 0) {
2190 		rc = -ENODEV;
2191 		goto out;
2192 	}
2193 
2194 	/* Initialize IB Messaging Ring */
2195 	priv->imsg_ring[mbox].dev_id = dev_id;
2196 	priv->imsg_ring[mbox].size = entries;
2197 	priv->imsg_ring[mbox].rx_slot = 0;
2198 	priv->imsg_ring[mbox].desc_rdptr = 0;
2199 	priv->imsg_ring[mbox].fq_wrptr = 0;
2200 	for (i = 0; i < priv->imsg_ring[mbox].size; i++)
2201 		priv->imsg_ring[mbox].imq_base[i] = NULL;
2202 	spin_lock_init(&priv->imsg_ring[mbox].lock);
2203 
2204 	/* Allocate buffers for incoming messages */
2205 	priv->imsg_ring[mbox].buf_base =
2206 		dma_alloc_coherent(&priv->pdev->dev,
2207 				   entries * TSI721_MSG_BUFFER_SIZE,
2208 				   &priv->imsg_ring[mbox].buf_phys,
2209 				   GFP_KERNEL);
2210 
2211 	if (priv->imsg_ring[mbox].buf_base == NULL) {
2212 		tsi_err(&priv->pdev->dev,
2213 			"Failed to allocate buffers for IB MBOX%d", mbox);
2214 		rc = -ENOMEM;
2215 		goto out;
2216 	}
2217 
2218 	/* Allocate memory for circular free list */
2219 	priv->imsg_ring[mbox].imfq_base =
2220 		dma_alloc_coherent(&priv->pdev->dev,
2221 				   entries * 8,
2222 				   &priv->imsg_ring[mbox].imfq_phys,
2223 				   GFP_KERNEL);
2224 
2225 	if (priv->imsg_ring[mbox].imfq_base == NULL) {
2226 		tsi_err(&priv->pdev->dev,
2227 			"Failed to allocate free queue for IB MBOX%d", mbox);
2228 		rc = -ENOMEM;
2229 		goto out_buf;
2230 	}
2231 
2232 	/* Allocate memory for Inbound message descriptors */
2233 	priv->imsg_ring[mbox].imd_base =
2234 		dma_alloc_coherent(&priv->pdev->dev,
2235 				   entries * sizeof(struct tsi721_imsg_desc),
2236 				   &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL);
2237 
2238 	if (priv->imsg_ring[mbox].imd_base == NULL) {
2239 		tsi_err(&priv->pdev->dev,
2240 			"Failed to allocate descriptor memory for IB MBOX%d",
2241 			mbox);
2242 		rc = -ENOMEM;
2243 		goto out_dma;
2244 	}
2245 
2246 	/* Fill free buffer pointer list */
2247 	free_ptr = priv->imsg_ring[mbox].imfq_base;
2248 	for (i = 0; i < entries; i++)
2249 		free_ptr[i] = cpu_to_le64(
2250 				(u64)(priv->imsg_ring[mbox].buf_phys) +
2251 				i * 0x1000);
2252 
2253 	mb();
2254 
2255 	/*
2256 	 * For mapping of inbound SRIO Messages into appropriate queues we need
2257 	 * to set Inbound Device ID register in the messaging engine. We do it
2258 	 * once when first inbound mailbox is requested.
2259 	 */
2260 	if (!(priv->flags & TSI721_IMSGID_SET)) {
2261 		iowrite32((u32)priv->mport.host_deviceid,
2262 			priv->regs + TSI721_IB_DEVID);
2263 		priv->flags |= TSI721_IMSGID_SET;
2264 	}
2265 
2266 	/*
2267 	 * Configure Inbound Messaging channel (ch = mbox + 4)
2268 	 */
2269 
2270 	/* Setup Inbound Message free queue */
2271 	iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32),
2272 		priv->regs + TSI721_IBDMAC_FQBH(ch));
2273 	iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys &
2274 			TSI721_IBDMAC_FQBL_MASK),
2275 		priv->regs+TSI721_IBDMAC_FQBL(ch));
2276 	iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
2277 		priv->regs + TSI721_IBDMAC_FQSZ(ch));
2278 
2279 	/* Setup Inbound Message descriptor queue */
2280 	iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32),
2281 		priv->regs + TSI721_IBDMAC_DQBH(ch));
2282 	iowrite32(((u32)priv->imsg_ring[mbox].imd_phys &
2283 		   (u32)TSI721_IBDMAC_DQBL_MASK),
2284 		priv->regs+TSI721_IBDMAC_DQBL(ch));
2285 	iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
2286 		priv->regs + TSI721_IBDMAC_DQSZ(ch));
2287 
2288 	/* Enable interrupts */
2289 
2290 #ifdef CONFIG_PCI_MSI
2291 	if (priv->flags & TSI721_USING_MSIX) {
2292 		int idx = TSI721_VECT_IMB0_RCV + mbox;
2293 
2294 		/* Request interrupt service if we are in MSI-X mode */
2295 		rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0,
2296 				 priv->msix[idx].irq_name, (void *)priv);
2297 
2298 		if (rc) {
2299 			tsi_debug(IMSG, &priv->pdev->dev,
2300 				"Unable to get MSI-X IRQ for IBOX%d-DONE",
2301 				mbox);
2302 			goto out_desc;
2303 		}
2304 
2305 		idx = TSI721_VECT_IMB0_INT + mbox;
2306 		rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0,
2307 				 priv->msix[idx].irq_name, (void *)priv);
2308 
2309 		if (rc)	{
2310 			tsi_debug(IMSG, &priv->pdev->dev,
2311 				"Unable to get MSI-X IRQ for IBOX%d-INT", mbox);
2312 			free_irq(
2313 				priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
2314 				(void *)priv);
2315 			goto out_desc;
2316 		}
2317 	}
2318 #endif /* CONFIG_PCI_MSI */
2319 
2320 	tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL);
2321 
2322 	/* Initialize Inbound Message Engine */
2323 	iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch));
2324 	ioread32(priv->regs + TSI721_IBDMAC_CTL(ch));
2325 	udelay(10);
2326 	priv->imsg_ring[mbox].fq_wrptr = entries - 1;
2327 	iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch));
2328 
2329 	priv->imsg_init[mbox] = 1;
2330 	return 0;
2331 
2332 #ifdef CONFIG_PCI_MSI
2333 out_desc:
2334 	dma_free_coherent(&priv->pdev->dev,
2335 		priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
2336 		priv->imsg_ring[mbox].imd_base,
2337 		priv->imsg_ring[mbox].imd_phys);
2338 
2339 	priv->imsg_ring[mbox].imd_base = NULL;
2340 #endif /* CONFIG_PCI_MSI */
2341 
2342 out_dma:
2343 	dma_free_coherent(&priv->pdev->dev,
2344 		priv->imsg_ring[mbox].size * 8,
2345 		priv->imsg_ring[mbox].imfq_base,
2346 		priv->imsg_ring[mbox].imfq_phys);
2347 
2348 	priv->imsg_ring[mbox].imfq_base = NULL;
2349 
2350 out_buf:
2351 	dma_free_coherent(&priv->pdev->dev,
2352 		priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
2353 		priv->imsg_ring[mbox].buf_base,
2354 		priv->imsg_ring[mbox].buf_phys);
2355 
2356 	priv->imsg_ring[mbox].buf_base = NULL;
2357 
2358 out:
2359 	return rc;
2360 }
2361 
2362 /**
2363  * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox
2364  * @mport: Master port implementing the Inbound Messaging Engine
2365  * @mbox: Mailbox to close
2366  */
2367 static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox)
2368 {
2369 	struct tsi721_device *priv = mport->priv;
2370 	u32 rx_slot;
2371 	int ch = mbox + 4;
2372 
2373 	if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */
2374 		return;
2375 	priv->imsg_init[mbox] = 0;
2376 
2377 	/* Disable Inbound Messaging Engine */
2378 
2379 	/* Disable Interrupts */
2380 	tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK);
2381 
2382 #ifdef CONFIG_PCI_MSI
2383 	if (priv->flags & TSI721_USING_MSIX) {
2384 		free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
2385 				(void *)priv);
2386 		free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
2387 				(void *)priv);
2388 	}
2389 #endif /* CONFIG_PCI_MSI */
2390 
2391 	/* Clear Inbound Buffer Queue */
2392 	for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++)
2393 		priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
2394 
2395 	/* Free memory allocated for message buffers */
2396 	dma_free_coherent(&priv->pdev->dev,
2397 		priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
2398 		priv->imsg_ring[mbox].buf_base,
2399 		priv->imsg_ring[mbox].buf_phys);
2400 
2401 	priv->imsg_ring[mbox].buf_base = NULL;
2402 
2403 	/* Free memory allocated for free pointr list */
2404 	dma_free_coherent(&priv->pdev->dev,
2405 		priv->imsg_ring[mbox].size * 8,
2406 		priv->imsg_ring[mbox].imfq_base,
2407 		priv->imsg_ring[mbox].imfq_phys);
2408 
2409 	priv->imsg_ring[mbox].imfq_base = NULL;
2410 
2411 	/* Free memory allocated for RX descriptors */
2412 	dma_free_coherent(&priv->pdev->dev,
2413 		priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
2414 		priv->imsg_ring[mbox].imd_base,
2415 		priv->imsg_ring[mbox].imd_phys);
2416 
2417 	priv->imsg_ring[mbox].imd_base = NULL;
2418 }
2419 
2420 /**
2421  * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue
2422  * @mport: Master port implementing the Inbound Messaging Engine
2423  * @mbox: Inbound mailbox number
2424  * @buf: Buffer to add to inbound queue
2425  */
2426 static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
2427 {
2428 	struct tsi721_device *priv = mport->priv;
2429 	u32 rx_slot;
2430 	int rc = 0;
2431 
2432 	rx_slot = priv->imsg_ring[mbox].rx_slot;
2433 	if (priv->imsg_ring[mbox].imq_base[rx_slot]) {
2434 		tsi_err(&priv->pdev->dev,
2435 			"Error adding inbound buffer %d, buffer exists",
2436 			rx_slot);
2437 		rc = -EINVAL;
2438 		goto out;
2439 	}
2440 
2441 	priv->imsg_ring[mbox].imq_base[rx_slot] = buf;
2442 
2443 	if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size)
2444 		priv->imsg_ring[mbox].rx_slot = 0;
2445 
2446 out:
2447 	return rc;
2448 }
2449 
2450 /**
2451  * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue
2452  * @mport: Master port implementing the Inbound Messaging Engine
2453  * @mbox: Inbound mailbox number
2454  *
2455  * Returns pointer to the message on success or NULL on failure.
2456  */
2457 static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox)
2458 {
2459 	struct tsi721_device *priv = mport->priv;
2460 	struct tsi721_imsg_desc *desc;
2461 	u32 rx_slot;
2462 	void *rx_virt = NULL;
2463 	u64 rx_phys;
2464 	void *buf = NULL;
2465 	u64 *free_ptr;
2466 	int ch = mbox + 4;
2467 	int msg_size;
2468 
2469 	if (!priv->imsg_init[mbox])
2470 		return NULL;
2471 
2472 	desc = priv->imsg_ring[mbox].imd_base;
2473 	desc += priv->imsg_ring[mbox].desc_rdptr;
2474 
2475 	if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO))
2476 		goto out;
2477 
2478 	rx_slot = priv->imsg_ring[mbox].rx_slot;
2479 	while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) {
2480 		if (++rx_slot == priv->imsg_ring[mbox].size)
2481 			rx_slot = 0;
2482 	}
2483 
2484 	rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) |
2485 			le32_to_cpu(desc->bufptr_lo);
2486 
2487 	rx_virt = priv->imsg_ring[mbox].buf_base +
2488 		  (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys);
2489 
2490 	buf = priv->imsg_ring[mbox].imq_base[rx_slot];
2491 	msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT;
2492 	if (msg_size == 0)
2493 		msg_size = RIO_MAX_MSG_SIZE;
2494 
2495 	memcpy(buf, rx_virt, msg_size);
2496 	priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
2497 
2498 	desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO);
2499 	if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size)
2500 		priv->imsg_ring[mbox].desc_rdptr = 0;
2501 
2502 	iowrite32(priv->imsg_ring[mbox].desc_rdptr,
2503 		priv->regs + TSI721_IBDMAC_DQRP(ch));
2504 
2505 	/* Return free buffer into the pointer list */
2506 	free_ptr = priv->imsg_ring[mbox].imfq_base;
2507 	free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys);
2508 
2509 	if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size)
2510 		priv->imsg_ring[mbox].fq_wrptr = 0;
2511 
2512 	iowrite32(priv->imsg_ring[mbox].fq_wrptr,
2513 		priv->regs + TSI721_IBDMAC_FQWP(ch));
2514 out:
2515 	return buf;
2516 }
2517 
2518 /**
2519  * tsi721_messages_init - Initialization of Messaging Engine
2520  * @priv: pointer to tsi721 private data
2521  *
2522  * Configures Tsi721 messaging engine.
2523  */
2524 static int tsi721_messages_init(struct tsi721_device *priv)
2525 {
2526 	int	ch;
2527 
2528 	iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG);
2529 	iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT);
2530 	iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT);
2531 
2532 	/* Set SRIO Message Request/Response Timeout */
2533 	iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO);
2534 
2535 	/* Initialize Inbound Messaging Engine Registers */
2536 	for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) {
2537 		/* Clear interrupt bits */
2538 		iowrite32(TSI721_IBDMAC_INT_MASK,
2539 			priv->regs + TSI721_IBDMAC_INT(ch));
2540 		/* Clear Status */
2541 		iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch));
2542 
2543 		iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK,
2544 				priv->regs + TSI721_SMSG_ECC_COR_LOG(ch));
2545 		iowrite32(TSI721_SMSG_ECC_NCOR_MASK,
2546 				priv->regs + TSI721_SMSG_ECC_NCOR(ch));
2547 	}
2548 
2549 	return 0;
2550 }
2551 
2552 /**
2553  * tsi721_query_mport - Fetch inbound message from the Tsi721 MSG Queue
2554  * @mport: Master port implementing the Inbound Messaging Engine
2555  * @mbox: Inbound mailbox number
2556  *
2557  * Returns pointer to the message on success or NULL on failure.
2558  */
2559 static int tsi721_query_mport(struct rio_mport *mport,
2560 			      struct rio_mport_attr *attr)
2561 {
2562 	struct tsi721_device *priv = mport->priv;
2563 	u32 rval;
2564 
2565 	rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_ERR_STS_CSR(0, 0));
2566 	if (rval & RIO_PORT_N_ERR_STS_PORT_OK) {
2567 		rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL2_CSR(0, 0));
2568 		attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28;
2569 		rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL_CSR(0, 0));
2570 		attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27;
2571 	} else
2572 		attr->link_speed = RIO_LINK_DOWN;
2573 
2574 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
2575 	attr->flags = RIO_MPORT_DMA | RIO_MPORT_DMA_SG;
2576 	attr->dma_max_sge = 0;
2577 	attr->dma_max_size = TSI721_BDMA_MAX_BCOUNT;
2578 	attr->dma_align = 0;
2579 #else
2580 	attr->flags = 0;
2581 #endif
2582 	return 0;
2583 }
2584 
2585 /**
2586  * tsi721_disable_ints - disables all device interrupts
2587  * @priv: pointer to tsi721 private data
2588  */
2589 static void tsi721_disable_ints(struct tsi721_device *priv)
2590 {
2591 	int ch;
2592 
2593 	/* Disable all device level interrupts */
2594 	iowrite32(0, priv->regs + TSI721_DEV_INTE);
2595 
2596 	/* Disable all Device Channel interrupts */
2597 	iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE);
2598 
2599 	/* Disable all Inbound Msg Channel interrupts */
2600 	for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++)
2601 		iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch));
2602 
2603 	/* Disable all Outbound Msg Channel interrupts */
2604 	for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++)
2605 		iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch));
2606 
2607 	/* Disable all general messaging interrupts */
2608 	iowrite32(0, priv->regs + TSI721_SMSG_INTE);
2609 
2610 	/* Disable all BDMA Channel interrupts */
2611 	for (ch = 0; ch < TSI721_DMA_MAXCH; ch++)
2612 		iowrite32(0,
2613 			priv->regs + TSI721_DMAC_BASE(ch) + TSI721_DMAC_INTE);
2614 
2615 	/* Disable all general BDMA interrupts */
2616 	iowrite32(0, priv->regs + TSI721_BDMA_INTE);
2617 
2618 	/* Disable all SRIO Channel interrupts */
2619 	for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++)
2620 		iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch));
2621 
2622 	/* Disable all general SR2PC interrupts */
2623 	iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE);
2624 
2625 	/* Disable all PC2SR interrupts */
2626 	iowrite32(0, priv->regs + TSI721_PC2SR_INTE);
2627 
2628 	/* Disable all I2C interrupts */
2629 	iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE);
2630 
2631 	/* Disable SRIO MAC interrupts */
2632 	iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE);
2633 	iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN);
2634 }
2635 
2636 static struct rio_ops tsi721_rio_ops = {
2637 	.lcread			= tsi721_lcread,
2638 	.lcwrite		= tsi721_lcwrite,
2639 	.cread			= tsi721_cread_dma,
2640 	.cwrite			= tsi721_cwrite_dma,
2641 	.dsend			= tsi721_dsend,
2642 	.open_inb_mbox		= tsi721_open_inb_mbox,
2643 	.close_inb_mbox		= tsi721_close_inb_mbox,
2644 	.open_outb_mbox		= tsi721_open_outb_mbox,
2645 	.close_outb_mbox	= tsi721_close_outb_mbox,
2646 	.add_outb_message	= tsi721_add_outb_message,
2647 	.add_inb_buffer		= tsi721_add_inb_buffer,
2648 	.get_inb_message	= tsi721_get_inb_message,
2649 	.map_inb		= tsi721_rio_map_inb_mem,
2650 	.unmap_inb		= tsi721_rio_unmap_inb_mem,
2651 	.pwenable		= tsi721_pw_enable,
2652 	.query_mport		= tsi721_query_mport,
2653 	.map_outb		= tsi721_map_outb_win,
2654 	.unmap_outb		= tsi721_unmap_outb_win,
2655 };
2656 
2657 static void tsi721_mport_release(struct device *dev)
2658 {
2659 	struct rio_mport *mport = to_rio_mport(dev);
2660 
2661 	tsi_debug(EXIT, dev, "%s id=%d", mport->name, mport->id);
2662 }
2663 
2664 /**
2665  * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port
2666  * @priv: pointer to tsi721 private data
2667  *
2668  * Configures Tsi721 as RapidIO master port.
2669  */
2670 static int tsi721_setup_mport(struct tsi721_device *priv)
2671 {
2672 	struct pci_dev *pdev = priv->pdev;
2673 	int err = 0;
2674 	struct rio_mport *mport = &priv->mport;
2675 
2676 	err = rio_mport_initialize(mport);
2677 	if (err)
2678 		return err;
2679 
2680 	mport->ops = &tsi721_rio_ops;
2681 	mport->index = 0;
2682 	mport->sys_size = 0; /* small system */
2683 	mport->priv = (void *)priv;
2684 	mport->phys_efptr = 0x100;
2685 	mport->phys_rmap = 1;
2686 	mport->dev.parent = &pdev->dev;
2687 	mport->dev.release = tsi721_mport_release;
2688 
2689 	INIT_LIST_HEAD(&mport->dbells);
2690 
2691 	rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
2692 	rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3);
2693 	rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3);
2694 	snprintf(mport->name, RIO_MAX_MPORT_NAME, "%s(%s)",
2695 		 dev_driver_string(&pdev->dev), dev_name(&pdev->dev));
2696 
2697 	/* Hook up interrupt handler */
2698 
2699 #ifdef CONFIG_PCI_MSI
2700 	if (!tsi721_enable_msix(priv))
2701 		priv->flags |= TSI721_USING_MSIX;
2702 	else if (!pci_enable_msi(pdev))
2703 		priv->flags |= TSI721_USING_MSI;
2704 	else
2705 		tsi_debug(MPORT, &pdev->dev,
2706 			 "MSI/MSI-X is not available. Using legacy INTx.");
2707 #endif /* CONFIG_PCI_MSI */
2708 
2709 	err = tsi721_request_irq(priv);
2710 
2711 	if (err) {
2712 		tsi_err(&pdev->dev, "Unable to get PCI IRQ %02X (err=0x%x)",
2713 			pdev->irq, err);
2714 		return err;
2715 	}
2716 
2717 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
2718 	err = tsi721_register_dma(priv);
2719 	if (err)
2720 		goto err_exit;
2721 #endif
2722 	/* Enable SRIO link */
2723 	iowrite32(ioread32(priv->regs + TSI721_DEVCTL) |
2724 		  TSI721_DEVCTL_SRBOOT_CMPL,
2725 		  priv->regs + TSI721_DEVCTL);
2726 
2727 	if (mport->host_deviceid >= 0)
2728 		iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER |
2729 			  RIO_PORT_GEN_DISCOVERED,
2730 			  priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
2731 	else
2732 		iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
2733 
2734 	err = rio_register_mport(mport);
2735 	if (err) {
2736 		tsi721_unregister_dma(priv);
2737 		goto err_exit;
2738 	}
2739 
2740 	return 0;
2741 
2742 err_exit:
2743 	tsi721_free_irq(priv);
2744 	return err;
2745 }
2746 
2747 static int tsi721_probe(struct pci_dev *pdev,
2748 				  const struct pci_device_id *id)
2749 {
2750 	struct tsi721_device *priv;
2751 	int err;
2752 
2753 	priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL);
2754 	if (!priv) {
2755 		err = -ENOMEM;
2756 		goto err_exit;
2757 	}
2758 
2759 	err = pci_enable_device(pdev);
2760 	if (err) {
2761 		tsi_err(&pdev->dev, "Failed to enable PCI device");
2762 		goto err_clean;
2763 	}
2764 
2765 	priv->pdev = pdev;
2766 
2767 #ifdef DEBUG
2768 	{
2769 		int i;
2770 
2771 		for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
2772 			tsi_debug(INIT, &pdev->dev, "res%d %pR",
2773 				  i, &pdev->resource[i]);
2774 		}
2775 	}
2776 #endif
2777 	/*
2778 	 * Verify BAR configuration
2779 	 */
2780 
2781 	/* BAR_0 (registers) must be 512KB+ in 32-bit address space */
2782 	if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) ||
2783 	    pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 ||
2784 	    pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) {
2785 		tsi_err(&pdev->dev, "Missing or misconfigured CSR BAR0");
2786 		err = -ENODEV;
2787 		goto err_disable_pdev;
2788 	}
2789 
2790 	/* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */
2791 	if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) ||
2792 	    pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 ||
2793 	    pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) {
2794 		tsi_err(&pdev->dev, "Missing or misconfigured Doorbell BAR1");
2795 		err = -ENODEV;
2796 		goto err_disable_pdev;
2797 	}
2798 
2799 	/*
2800 	 * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address
2801 	 * space.
2802 	 * NOTE: BAR_2 and BAR_4 are not used by this version of driver.
2803 	 * It may be a good idea to keep them disabled using HW configuration
2804 	 * to save PCI memory space.
2805 	 */
2806 
2807 	priv->p2r_bar[0].size = priv->p2r_bar[1].size = 0;
2808 
2809 	if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64) {
2810 		if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_PREFETCH)
2811 			tsi_debug(INIT, &pdev->dev,
2812 				 "Prefetchable OBW BAR2 will not be used");
2813 		else {
2814 			priv->p2r_bar[0].base = pci_resource_start(pdev, BAR_2);
2815 			priv->p2r_bar[0].size = pci_resource_len(pdev, BAR_2);
2816 		}
2817 	}
2818 
2819 	if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64) {
2820 		if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_PREFETCH)
2821 			tsi_debug(INIT, &pdev->dev,
2822 				 "Prefetchable OBW BAR4 will not be used");
2823 		else {
2824 			priv->p2r_bar[1].base = pci_resource_start(pdev, BAR_4);
2825 			priv->p2r_bar[1].size = pci_resource_len(pdev, BAR_4);
2826 		}
2827 	}
2828 
2829 	err = pci_request_regions(pdev, DRV_NAME);
2830 	if (err) {
2831 		tsi_err(&pdev->dev, "Unable to obtain PCI resources");
2832 		goto err_disable_pdev;
2833 	}
2834 
2835 	pci_set_master(pdev);
2836 
2837 	priv->regs = pci_ioremap_bar(pdev, BAR_0);
2838 	if (!priv->regs) {
2839 		tsi_err(&pdev->dev, "Unable to map device registers space");
2840 		err = -ENOMEM;
2841 		goto err_free_res;
2842 	}
2843 
2844 	priv->odb_base = pci_ioremap_bar(pdev, BAR_1);
2845 	if (!priv->odb_base) {
2846 		tsi_err(&pdev->dev, "Unable to map outbound doorbells space");
2847 		err = -ENOMEM;
2848 		goto err_unmap_bars;
2849 	}
2850 
2851 	/* Configure DMA attributes. */
2852 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
2853 		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
2854 		if (err) {
2855 			tsi_err(&pdev->dev, "Unable to set DMA mask");
2856 			goto err_unmap_bars;
2857 		}
2858 
2859 		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
2860 			tsi_info(&pdev->dev, "Unable to set consistent DMA mask");
2861 	} else {
2862 		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
2863 		if (err)
2864 			tsi_info(&pdev->dev, "Unable to set consistent DMA mask");
2865 	}
2866 
2867 	BUG_ON(!pci_is_pcie(pdev));
2868 
2869 	/* Clear "no snoop" and "relaxed ordering" bits. */
2870 	pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
2871 		PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN, 0);
2872 
2873 	/* Override PCIe Maximum Read Request Size setting if requested */
2874 	if (pcie_mrrs >= 0) {
2875 		if (pcie_mrrs <= 5)
2876 			pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
2877 					PCI_EXP_DEVCTL_READRQ, pcie_mrrs << 12);
2878 		else
2879 			tsi_info(&pdev->dev,
2880 				 "Invalid MRRS override value %d", pcie_mrrs);
2881 	}
2882 
2883 	/* Set PCIe completion timeout to 1-10ms */
2884 	pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2,
2885 					   PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0x2);
2886 
2887 	/*
2888 	 * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block
2889 	 */
2890 	pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01);
2891 	pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL,
2892 						TSI721_MSIXTBL_OFFSET);
2893 	pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA,
2894 						TSI721_MSIXPBA_OFFSET);
2895 	pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0);
2896 	/* End of FIXUP */
2897 
2898 	tsi721_disable_ints(priv);
2899 
2900 	tsi721_init_pc2sr_mapping(priv);
2901 	tsi721_init_sr2pc_mapping(priv);
2902 
2903 	if (tsi721_bdma_maint_init(priv)) {
2904 		tsi_err(&pdev->dev, "BDMA initialization failed");
2905 		err = -ENOMEM;
2906 		goto err_unmap_bars;
2907 	}
2908 
2909 	err = tsi721_doorbell_init(priv);
2910 	if (err)
2911 		goto err_free_bdma;
2912 
2913 	tsi721_port_write_init(priv);
2914 
2915 	err = tsi721_messages_init(priv);
2916 	if (err)
2917 		goto err_free_consistent;
2918 
2919 	err = tsi721_setup_mport(priv);
2920 	if (err)
2921 		goto err_free_consistent;
2922 
2923 	pci_set_drvdata(pdev, priv);
2924 	tsi721_interrupts_init(priv);
2925 
2926 	return 0;
2927 
2928 err_free_consistent:
2929 	tsi721_port_write_free(priv);
2930 	tsi721_doorbell_free(priv);
2931 err_free_bdma:
2932 	tsi721_bdma_maint_free(priv);
2933 err_unmap_bars:
2934 	if (priv->regs)
2935 		iounmap(priv->regs);
2936 	if (priv->odb_base)
2937 		iounmap(priv->odb_base);
2938 err_free_res:
2939 	pci_release_regions(pdev);
2940 	pci_clear_master(pdev);
2941 err_disable_pdev:
2942 	pci_disable_device(pdev);
2943 err_clean:
2944 	kfree(priv);
2945 err_exit:
2946 	return err;
2947 }
2948 
2949 static void tsi721_remove(struct pci_dev *pdev)
2950 {
2951 	struct tsi721_device *priv = pci_get_drvdata(pdev);
2952 
2953 	tsi_debug(EXIT, &pdev->dev, "enter");
2954 
2955 	tsi721_disable_ints(priv);
2956 	tsi721_free_irq(priv);
2957 	flush_scheduled_work();
2958 	rio_unregister_mport(&priv->mport);
2959 
2960 	tsi721_unregister_dma(priv);
2961 	tsi721_bdma_maint_free(priv);
2962 	tsi721_doorbell_free(priv);
2963 	tsi721_port_write_free(priv);
2964 	tsi721_close_sr2pc_mapping(priv);
2965 
2966 	if (priv->regs)
2967 		iounmap(priv->regs);
2968 	if (priv->odb_base)
2969 		iounmap(priv->odb_base);
2970 #ifdef CONFIG_PCI_MSI
2971 	if (priv->flags & TSI721_USING_MSIX)
2972 		pci_disable_msix(priv->pdev);
2973 	else if (priv->flags & TSI721_USING_MSI)
2974 		pci_disable_msi(priv->pdev);
2975 #endif
2976 	pci_release_regions(pdev);
2977 	pci_clear_master(pdev);
2978 	pci_disable_device(pdev);
2979 	pci_set_drvdata(pdev, NULL);
2980 	kfree(priv);
2981 	tsi_debug(EXIT, &pdev->dev, "exit");
2982 }
2983 
2984 static void tsi721_shutdown(struct pci_dev *pdev)
2985 {
2986 	struct tsi721_device *priv = pci_get_drvdata(pdev);
2987 
2988 	tsi_debug(EXIT, &pdev->dev, "enter");
2989 
2990 	tsi721_disable_ints(priv);
2991 	tsi721_dma_stop_all(priv);
2992 	pci_clear_master(pdev);
2993 	pci_disable_device(pdev);
2994 }
2995 
2996 static const struct pci_device_id tsi721_pci_tbl[] = {
2997 	{ PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) },
2998 	{ 0, }	/* terminate list */
2999 };
3000 
3001 MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl);
3002 
3003 static struct pci_driver tsi721_driver = {
3004 	.name		= "tsi721",
3005 	.id_table	= tsi721_pci_tbl,
3006 	.probe		= tsi721_probe,
3007 	.remove		= tsi721_remove,
3008 	.shutdown	= tsi721_shutdown,
3009 };
3010 
3011 module_pci_driver(tsi721_driver);
3012 
3013 MODULE_DESCRIPTION("IDT Tsi721 PCIExpress-to-SRIO bridge driver");
3014 MODULE_AUTHOR("Integrated Device Technology, Inc.");
3015 MODULE_LICENSE("GPL");
3016