1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * ECAP PWM driver 4 * 5 * Copyright (C) 2012 Texas Instruments, Inc. - https://www.ti.com/ 6 */ 7 8 #include <linux/module.h> 9 #include <linux/platform_device.h> 10 #include <linux/io.h> 11 #include <linux/err.h> 12 #include <linux/clk.h> 13 #include <linux/pm_runtime.h> 14 #include <linux/pwm.h> 15 #include <linux/of_device.h> 16 17 /* ECAP registers and bits definitions */ 18 #define CAP1 0x08 19 #define CAP2 0x0C 20 #define CAP3 0x10 21 #define CAP4 0x14 22 #define ECCTL2 0x2A 23 #define ECCTL2_APWM_POL_LOW BIT(10) 24 #define ECCTL2_APWM_MODE BIT(9) 25 #define ECCTL2_SYNC_SEL_DISA (BIT(7) | BIT(6)) 26 #define ECCTL2_TSCTR_FREERUN BIT(4) 27 28 struct ecap_context { 29 u32 cap3; 30 u32 cap4; 31 u16 ecctl2; 32 }; 33 34 struct ecap_pwm_chip { 35 struct pwm_chip chip; 36 unsigned int clk_rate; 37 void __iomem *mmio_base; 38 struct ecap_context ctx; 39 }; 40 41 static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip) 42 { 43 return container_of(chip, struct ecap_pwm_chip, chip); 44 } 45 46 /* 47 * period_ns = 10^9 * period_cycles / PWM_CLK_RATE 48 * duty_ns = 10^9 * duty_cycles / PWM_CLK_RATE 49 */ 50 static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, 51 int duty_ns, int period_ns) 52 { 53 struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); 54 u32 period_cycles, duty_cycles; 55 unsigned long long c; 56 u16 value; 57 58 if (period_ns > NSEC_PER_SEC) 59 return -ERANGE; 60 61 c = pc->clk_rate; 62 c = c * period_ns; 63 do_div(c, NSEC_PER_SEC); 64 period_cycles = (u32)c; 65 66 if (period_cycles < 1) { 67 period_cycles = 1; 68 duty_cycles = 1; 69 } else { 70 c = pc->clk_rate; 71 c = c * duty_ns; 72 do_div(c, NSEC_PER_SEC); 73 duty_cycles = (u32)c; 74 } 75 76 pm_runtime_get_sync(pc->chip.dev); 77 78 value = readw(pc->mmio_base + ECCTL2); 79 80 /* Configure APWM mode & disable sync option */ 81 value |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA; 82 83 writew(value, pc->mmio_base + ECCTL2); 84 85 if (!pwm_is_enabled(pwm)) { 86 /* Update active registers if not running */ 87 writel(duty_cycles, pc->mmio_base + CAP2); 88 writel(period_cycles, pc->mmio_base + CAP1); 89 } else { 90 /* 91 * Update shadow registers to configure period and 92 * compare values. This helps current PWM period to 93 * complete on reconfiguring 94 */ 95 writel(duty_cycles, pc->mmio_base + CAP4); 96 writel(period_cycles, pc->mmio_base + CAP3); 97 } 98 99 if (!pwm_is_enabled(pwm)) { 100 value = readw(pc->mmio_base + ECCTL2); 101 /* Disable APWM mode to put APWM output Low */ 102 value &= ~ECCTL2_APWM_MODE; 103 writew(value, pc->mmio_base + ECCTL2); 104 } 105 106 pm_runtime_put_sync(pc->chip.dev); 107 108 return 0; 109 } 110 111 static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, 112 enum pwm_polarity polarity) 113 { 114 struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); 115 u16 value; 116 117 pm_runtime_get_sync(pc->chip.dev); 118 119 value = readw(pc->mmio_base + ECCTL2); 120 121 if (polarity == PWM_POLARITY_INVERSED) 122 /* Duty cycle defines LOW period of PWM */ 123 value |= ECCTL2_APWM_POL_LOW; 124 else 125 /* Duty cycle defines HIGH period of PWM */ 126 value &= ~ECCTL2_APWM_POL_LOW; 127 128 writew(value, pc->mmio_base + ECCTL2); 129 130 pm_runtime_put_sync(pc->chip.dev); 131 132 return 0; 133 } 134 135 static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) 136 { 137 struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); 138 u16 value; 139 140 /* Leave clock enabled on enabling PWM */ 141 pm_runtime_get_sync(pc->chip.dev); 142 143 /* 144 * Enable 'Free run Time stamp counter mode' to start counter 145 * and 'APWM mode' to enable APWM output 146 */ 147 value = readw(pc->mmio_base + ECCTL2); 148 value |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE; 149 writew(value, pc->mmio_base + ECCTL2); 150 151 return 0; 152 } 153 154 static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) 155 { 156 struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); 157 u16 value; 158 159 /* 160 * Disable 'Free run Time stamp counter mode' to stop counter 161 * and 'APWM mode' to put APWM output to low 162 */ 163 value = readw(pc->mmio_base + ECCTL2); 164 value &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE); 165 writew(value, pc->mmio_base + ECCTL2); 166 167 /* Disable clock on PWM disable */ 168 pm_runtime_put_sync(pc->chip.dev); 169 } 170 171 static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) 172 { 173 if (pwm_is_enabled(pwm)) { 174 dev_warn(chip->dev, "Removing PWM device without disabling\n"); 175 pm_runtime_put_sync(chip->dev); 176 } 177 } 178 179 static const struct pwm_ops ecap_pwm_ops = { 180 .free = ecap_pwm_free, 181 .config = ecap_pwm_config, 182 .set_polarity = ecap_pwm_set_polarity, 183 .enable = ecap_pwm_enable, 184 .disable = ecap_pwm_disable, 185 .owner = THIS_MODULE, 186 }; 187 188 static const struct of_device_id ecap_of_match[] = { 189 { .compatible = "ti,am3352-ecap" }, 190 { .compatible = "ti,am33xx-ecap" }, 191 {}, 192 }; 193 MODULE_DEVICE_TABLE(of, ecap_of_match); 194 195 static int ecap_pwm_probe(struct platform_device *pdev) 196 { 197 struct device_node *np = pdev->dev.of_node; 198 struct ecap_pwm_chip *pc; 199 struct clk *clk; 200 int ret; 201 202 pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); 203 if (!pc) 204 return -ENOMEM; 205 206 clk = devm_clk_get(&pdev->dev, "fck"); 207 if (IS_ERR(clk)) { 208 if (of_device_is_compatible(np, "ti,am33xx-ecap")) { 209 dev_warn(&pdev->dev, "Binding is obsolete.\n"); 210 clk = devm_clk_get(pdev->dev.parent, "fck"); 211 } 212 } 213 214 if (IS_ERR(clk)) { 215 dev_err(&pdev->dev, "failed to get clock\n"); 216 return PTR_ERR(clk); 217 } 218 219 pc->clk_rate = clk_get_rate(clk); 220 if (!pc->clk_rate) { 221 dev_err(&pdev->dev, "failed to get clock rate\n"); 222 return -EINVAL; 223 } 224 225 pc->chip.dev = &pdev->dev; 226 pc->chip.ops = &ecap_pwm_ops; 227 pc->chip.of_xlate = of_pwm_xlate_with_flags; 228 pc->chip.of_pwm_n_cells = 3; 229 pc->chip.base = -1; 230 pc->chip.npwm = 1; 231 232 pc->mmio_base = devm_platform_ioremap_resource(pdev, 0); 233 if (IS_ERR(pc->mmio_base)) 234 return PTR_ERR(pc->mmio_base); 235 236 ret = pwmchip_add(&pc->chip); 237 if (ret < 0) { 238 dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); 239 return ret; 240 } 241 242 platform_set_drvdata(pdev, pc); 243 pm_runtime_enable(&pdev->dev); 244 245 return 0; 246 } 247 248 static int ecap_pwm_remove(struct platform_device *pdev) 249 { 250 struct ecap_pwm_chip *pc = platform_get_drvdata(pdev); 251 252 pm_runtime_disable(&pdev->dev); 253 254 return pwmchip_remove(&pc->chip); 255 } 256 257 #ifdef CONFIG_PM_SLEEP 258 static void ecap_pwm_save_context(struct ecap_pwm_chip *pc) 259 { 260 pm_runtime_get_sync(pc->chip.dev); 261 pc->ctx.ecctl2 = readw(pc->mmio_base + ECCTL2); 262 pc->ctx.cap4 = readl(pc->mmio_base + CAP4); 263 pc->ctx.cap3 = readl(pc->mmio_base + CAP3); 264 pm_runtime_put_sync(pc->chip.dev); 265 } 266 267 static void ecap_pwm_restore_context(struct ecap_pwm_chip *pc) 268 { 269 writel(pc->ctx.cap3, pc->mmio_base + CAP3); 270 writel(pc->ctx.cap4, pc->mmio_base + CAP4); 271 writew(pc->ctx.ecctl2, pc->mmio_base + ECCTL2); 272 } 273 274 static int ecap_pwm_suspend(struct device *dev) 275 { 276 struct ecap_pwm_chip *pc = dev_get_drvdata(dev); 277 struct pwm_device *pwm = pc->chip.pwms; 278 279 ecap_pwm_save_context(pc); 280 281 /* Disable explicitly if PWM is running */ 282 if (pwm_is_enabled(pwm)) 283 pm_runtime_put_sync(dev); 284 285 return 0; 286 } 287 288 static int ecap_pwm_resume(struct device *dev) 289 { 290 struct ecap_pwm_chip *pc = dev_get_drvdata(dev); 291 struct pwm_device *pwm = pc->chip.pwms; 292 293 /* Enable explicitly if PWM was running */ 294 if (pwm_is_enabled(pwm)) 295 pm_runtime_get_sync(dev); 296 297 ecap_pwm_restore_context(pc); 298 return 0; 299 } 300 #endif 301 302 static SIMPLE_DEV_PM_OPS(ecap_pwm_pm_ops, ecap_pwm_suspend, ecap_pwm_resume); 303 304 static struct platform_driver ecap_pwm_driver = { 305 .driver = { 306 .name = "ecap", 307 .of_match_table = ecap_of_match, 308 .pm = &ecap_pwm_pm_ops, 309 }, 310 .probe = ecap_pwm_probe, 311 .remove = ecap_pwm_remove, 312 }; 313 module_platform_driver(ecap_pwm_driver); 314 315 MODULE_DESCRIPTION("ECAP PWM driver"); 316 MODULE_AUTHOR("Texas Instruments"); 317 MODULE_LICENSE("GPL"); 318