xref: /openbmc/linux/drivers/pwm/pwm-tiecap.c (revision 703e7713)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * ECAP PWM driver
4  *
5  * Copyright (C) 2012 Texas Instruments, Inc. - https://www.ti.com/
6  */
7 
8 #include <linux/module.h>
9 #include <linux/platform_device.h>
10 #include <linux/io.h>
11 #include <linux/err.h>
12 #include <linux/clk.h>
13 #include <linux/pm_runtime.h>
14 #include <linux/pwm.h>
15 #include <linux/of_device.h>
16 
17 /* ECAP registers and bits definitions */
18 #define CAP1			0x08
19 #define CAP2			0x0C
20 #define CAP3			0x10
21 #define CAP4			0x14
22 #define ECCTL2			0x2A
23 #define ECCTL2_APWM_POL_LOW	BIT(10)
24 #define ECCTL2_APWM_MODE	BIT(9)
25 #define ECCTL2_SYNC_SEL_DISA	(BIT(7) | BIT(6))
26 #define ECCTL2_TSCTR_FREERUN	BIT(4)
27 
28 struct ecap_context {
29 	u32 cap3;
30 	u32 cap4;
31 	u16 ecctl2;
32 };
33 
34 struct ecap_pwm_chip {
35 	struct pwm_chip chip;
36 	unsigned int clk_rate;
37 	void __iomem *mmio_base;
38 	struct ecap_context ctx;
39 };
40 
41 static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip)
42 {
43 	return container_of(chip, struct ecap_pwm_chip, chip);
44 }
45 
46 /*
47  * period_ns = 10^9 * period_cycles / PWM_CLK_RATE
48  * duty_ns   = 10^9 * duty_cycles / PWM_CLK_RATE
49  */
50 static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
51 			   int duty_ns, int period_ns, int enabled)
52 {
53 	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
54 	u32 period_cycles, duty_cycles;
55 	unsigned long long c;
56 	u16 value;
57 
58 	c = pc->clk_rate;
59 	c = c * period_ns;
60 	do_div(c, NSEC_PER_SEC);
61 	period_cycles = (u32)c;
62 
63 	if (period_cycles < 1) {
64 		period_cycles = 1;
65 		duty_cycles = 1;
66 	} else {
67 		c = pc->clk_rate;
68 		c = c * duty_ns;
69 		do_div(c, NSEC_PER_SEC);
70 		duty_cycles = (u32)c;
71 	}
72 
73 	pm_runtime_get_sync(pc->chip.dev);
74 
75 	value = readw(pc->mmio_base + ECCTL2);
76 
77 	/* Configure APWM mode & disable sync option */
78 	value |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA;
79 
80 	writew(value, pc->mmio_base + ECCTL2);
81 
82 	if (!enabled) {
83 		/* Update active registers if not running */
84 		writel(duty_cycles, pc->mmio_base + CAP2);
85 		writel(period_cycles, pc->mmio_base + CAP1);
86 	} else {
87 		/*
88 		 * Update shadow registers to configure period and
89 		 * compare values. This helps current PWM period to
90 		 * complete on reconfiguring
91 		 */
92 		writel(duty_cycles, pc->mmio_base + CAP4);
93 		writel(period_cycles, pc->mmio_base + CAP3);
94 	}
95 
96 	if (!enabled) {
97 		value = readw(pc->mmio_base + ECCTL2);
98 		/* Disable APWM mode to put APWM output Low */
99 		value &= ~ECCTL2_APWM_MODE;
100 		writew(value, pc->mmio_base + ECCTL2);
101 	}
102 
103 	pm_runtime_put_sync(pc->chip.dev);
104 
105 	return 0;
106 }
107 
108 static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
109 				 enum pwm_polarity polarity)
110 {
111 	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
112 	u16 value;
113 
114 	pm_runtime_get_sync(pc->chip.dev);
115 
116 	value = readw(pc->mmio_base + ECCTL2);
117 
118 	if (polarity == PWM_POLARITY_INVERSED)
119 		/* Duty cycle defines LOW period of PWM */
120 		value |= ECCTL2_APWM_POL_LOW;
121 	else
122 		/* Duty cycle defines HIGH period of PWM */
123 		value &= ~ECCTL2_APWM_POL_LOW;
124 
125 	writew(value, pc->mmio_base + ECCTL2);
126 
127 	pm_runtime_put_sync(pc->chip.dev);
128 
129 	return 0;
130 }
131 
132 static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
133 {
134 	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
135 	u16 value;
136 
137 	/* Leave clock enabled on enabling PWM */
138 	pm_runtime_get_sync(pc->chip.dev);
139 
140 	/*
141 	 * Enable 'Free run Time stamp counter mode' to start counter
142 	 * and  'APWM mode' to enable APWM output
143 	 */
144 	value = readw(pc->mmio_base + ECCTL2);
145 	value |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE;
146 	writew(value, pc->mmio_base + ECCTL2);
147 
148 	return 0;
149 }
150 
151 static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
152 {
153 	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
154 	u16 value;
155 
156 	/*
157 	 * Disable 'Free run Time stamp counter mode' to stop counter
158 	 * and 'APWM mode' to put APWM output to low
159 	 */
160 	value = readw(pc->mmio_base + ECCTL2);
161 	value &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE);
162 	writew(value, pc->mmio_base + ECCTL2);
163 
164 	/* Disable clock on PWM disable */
165 	pm_runtime_put_sync(pc->chip.dev);
166 }
167 
168 static int ecap_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
169 			  const struct pwm_state *state)
170 {
171 	int err;
172 	int enabled = pwm->state.enabled;
173 
174 	if (state->polarity != pwm->state.polarity) {
175 
176 		if (enabled) {
177 			ecap_pwm_disable(chip, pwm);
178 			enabled = false;
179 		}
180 
181 		err = ecap_pwm_set_polarity(chip, pwm, state->polarity);
182 		if (err)
183 			return err;
184 	}
185 
186 	if (!state->enabled) {
187 		if (enabled)
188 			ecap_pwm_disable(chip, pwm);
189 		return 0;
190 	}
191 
192 	if (state->period > NSEC_PER_SEC)
193 		return -ERANGE;
194 
195 	err = ecap_pwm_config(chip, pwm, state->duty_cycle,
196 			      state->period, enabled);
197 	if (err)
198 		return err;
199 
200 	if (!enabled)
201 		return ecap_pwm_enable(chip, pwm);
202 
203 	return 0;
204 }
205 
206 static const struct pwm_ops ecap_pwm_ops = {
207 	.apply = ecap_pwm_apply,
208 	.owner = THIS_MODULE,
209 };
210 
211 static const struct of_device_id ecap_of_match[] = {
212 	{ .compatible	= "ti,am3352-ecap" },
213 	{ .compatible	= "ti,am33xx-ecap" },
214 	{},
215 };
216 MODULE_DEVICE_TABLE(of, ecap_of_match);
217 
218 static int ecap_pwm_probe(struct platform_device *pdev)
219 {
220 	struct device_node *np = pdev->dev.of_node;
221 	struct ecap_pwm_chip *pc;
222 	struct clk *clk;
223 	int ret;
224 
225 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
226 	if (!pc)
227 		return -ENOMEM;
228 
229 	clk = devm_clk_get(&pdev->dev, "fck");
230 	if (IS_ERR(clk)) {
231 		if (of_device_is_compatible(np, "ti,am33xx-ecap")) {
232 			dev_warn(&pdev->dev, "Binding is obsolete.\n");
233 			clk = devm_clk_get(pdev->dev.parent, "fck");
234 		}
235 	}
236 
237 	if (IS_ERR(clk)) {
238 		dev_err(&pdev->dev, "failed to get clock\n");
239 		return PTR_ERR(clk);
240 	}
241 
242 	pc->clk_rate = clk_get_rate(clk);
243 	if (!pc->clk_rate) {
244 		dev_err(&pdev->dev, "failed to get clock rate\n");
245 		return -EINVAL;
246 	}
247 
248 	pc->chip.dev = &pdev->dev;
249 	pc->chip.ops = &ecap_pwm_ops;
250 	pc->chip.npwm = 1;
251 
252 	pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
253 	if (IS_ERR(pc->mmio_base))
254 		return PTR_ERR(pc->mmio_base);
255 
256 	ret = devm_pwmchip_add(&pdev->dev, &pc->chip);
257 	if (ret < 0) {
258 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
259 		return ret;
260 	}
261 
262 	platform_set_drvdata(pdev, pc);
263 	pm_runtime_enable(&pdev->dev);
264 
265 	return 0;
266 }
267 
268 static void ecap_pwm_remove(struct platform_device *pdev)
269 {
270 	pm_runtime_disable(&pdev->dev);
271 }
272 
273 #ifdef CONFIG_PM_SLEEP
274 static void ecap_pwm_save_context(struct ecap_pwm_chip *pc)
275 {
276 	pm_runtime_get_sync(pc->chip.dev);
277 	pc->ctx.ecctl2 = readw(pc->mmio_base + ECCTL2);
278 	pc->ctx.cap4 = readl(pc->mmio_base + CAP4);
279 	pc->ctx.cap3 = readl(pc->mmio_base + CAP3);
280 	pm_runtime_put_sync(pc->chip.dev);
281 }
282 
283 static void ecap_pwm_restore_context(struct ecap_pwm_chip *pc)
284 {
285 	writel(pc->ctx.cap3, pc->mmio_base + CAP3);
286 	writel(pc->ctx.cap4, pc->mmio_base + CAP4);
287 	writew(pc->ctx.ecctl2, pc->mmio_base + ECCTL2);
288 }
289 
290 static int ecap_pwm_suspend(struct device *dev)
291 {
292 	struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
293 	struct pwm_device *pwm = pc->chip.pwms;
294 
295 	ecap_pwm_save_context(pc);
296 
297 	/* Disable explicitly if PWM is running */
298 	if (pwm_is_enabled(pwm))
299 		pm_runtime_put_sync(dev);
300 
301 	return 0;
302 }
303 
304 static int ecap_pwm_resume(struct device *dev)
305 {
306 	struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
307 	struct pwm_device *pwm = pc->chip.pwms;
308 
309 	/* Enable explicitly if PWM was running */
310 	if (pwm_is_enabled(pwm))
311 		pm_runtime_get_sync(dev);
312 
313 	ecap_pwm_restore_context(pc);
314 	return 0;
315 }
316 #endif
317 
318 static SIMPLE_DEV_PM_OPS(ecap_pwm_pm_ops, ecap_pwm_suspend, ecap_pwm_resume);
319 
320 static struct platform_driver ecap_pwm_driver = {
321 	.driver = {
322 		.name = "ecap",
323 		.of_match_table = ecap_of_match,
324 		.pm = &ecap_pwm_pm_ops,
325 	},
326 	.probe = ecap_pwm_probe,
327 	.remove_new = ecap_pwm_remove,
328 };
329 module_platform_driver(ecap_pwm_driver);
330 
331 MODULE_DESCRIPTION("ECAP PWM driver");
332 MODULE_AUTHOR("Texas Instruments");
333 MODULE_LICENSE("GPL");
334