xref: /openbmc/linux/drivers/pwm/pwm-sun4i.c (revision dc6a81c3)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Driver for Allwinner sun4i Pulse Width Modulation Controller
4  *
5  * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
6  *
7  * Limitations:
8  * - When outputing the source clock directly, the PWM logic will be bypassed
9  *   and the currently running period is not guaranteed to be completed
10  */
11 
12 #include <linux/bitops.h>
13 #include <linux/clk.h>
14 #include <linux/delay.h>
15 #include <linux/err.h>
16 #include <linux/io.h>
17 #include <linux/jiffies.h>
18 #include <linux/module.h>
19 #include <linux/of.h>
20 #include <linux/of_device.h>
21 #include <linux/platform_device.h>
22 #include <linux/pwm.h>
23 #include <linux/reset.h>
24 #include <linux/slab.h>
25 #include <linux/spinlock.h>
26 #include <linux/time.h>
27 
28 #define PWM_CTRL_REG		0x0
29 
30 #define PWM_CH_PRD_BASE		0x4
31 #define PWM_CH_PRD_OFFSET	0x4
32 #define PWM_CH_PRD(ch)		(PWM_CH_PRD_BASE + PWM_CH_PRD_OFFSET * (ch))
33 
34 #define PWMCH_OFFSET		15
35 #define PWM_PRESCAL_MASK	GENMASK(3, 0)
36 #define PWM_PRESCAL_OFF		0
37 #define PWM_EN			BIT(4)
38 #define PWM_ACT_STATE		BIT(5)
39 #define PWM_CLK_GATING		BIT(6)
40 #define PWM_MODE		BIT(7)
41 #define PWM_PULSE		BIT(8)
42 #define PWM_BYPASS		BIT(9)
43 
44 #define PWM_RDY_BASE		28
45 #define PWM_RDY_OFFSET		1
46 #define PWM_RDY(ch)		BIT(PWM_RDY_BASE + PWM_RDY_OFFSET * (ch))
47 
48 #define PWM_PRD(prd)		(((prd) - 1) << 16)
49 #define PWM_PRD_MASK		GENMASK(15, 0)
50 
51 #define PWM_DTY_MASK		GENMASK(15, 0)
52 
53 #define PWM_REG_PRD(reg)	((((reg) >> 16) & PWM_PRD_MASK) + 1)
54 #define PWM_REG_DTY(reg)	((reg) & PWM_DTY_MASK)
55 #define PWM_REG_PRESCAL(reg, chan)	(((reg) >> ((chan) * PWMCH_OFFSET)) & PWM_PRESCAL_MASK)
56 
57 #define BIT_CH(bit, chan)	((bit) << ((chan) * PWMCH_OFFSET))
58 
59 static const u32 prescaler_table[] = {
60 	120,
61 	180,
62 	240,
63 	360,
64 	480,
65 	0,
66 	0,
67 	0,
68 	12000,
69 	24000,
70 	36000,
71 	48000,
72 	72000,
73 	0,
74 	0,
75 	0, /* Actually 1 but tested separately */
76 };
77 
78 struct sun4i_pwm_data {
79 	bool has_prescaler_bypass;
80 	bool has_direct_mod_clk_output;
81 	unsigned int npwm;
82 };
83 
84 struct sun4i_pwm_chip {
85 	struct pwm_chip chip;
86 	struct clk *bus_clk;
87 	struct clk *clk;
88 	struct reset_control *rst;
89 	void __iomem *base;
90 	spinlock_t ctrl_lock;
91 	const struct sun4i_pwm_data *data;
92 	unsigned long next_period[2];
93 	bool needs_delay[2];
94 };
95 
96 static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip)
97 {
98 	return container_of(chip, struct sun4i_pwm_chip, chip);
99 }
100 
101 static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *chip,
102 				  unsigned long offset)
103 {
104 	return readl(chip->base + offset);
105 }
106 
107 static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip,
108 				    u32 val, unsigned long offset)
109 {
110 	writel(val, chip->base + offset);
111 }
112 
113 static void sun4i_pwm_get_state(struct pwm_chip *chip,
114 				struct pwm_device *pwm,
115 				struct pwm_state *state)
116 {
117 	struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
118 	u64 clk_rate, tmp;
119 	u32 val;
120 	unsigned int prescaler;
121 
122 	clk_rate = clk_get_rate(sun4i_pwm->clk);
123 
124 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
125 
126 	/*
127 	 * PWM chapter in H6 manual has a diagram which explains that if bypass
128 	 * bit is set, no other setting has any meaning. Even more, experiment
129 	 * proved that also enable bit is ignored in this case.
130 	 */
131 	if ((val & BIT_CH(PWM_BYPASS, pwm->hwpwm)) &&
132 	    sun4i_pwm->data->has_direct_mod_clk_output) {
133 		state->period = DIV_ROUND_UP_ULL(NSEC_PER_SEC, clk_rate);
134 		state->duty_cycle = DIV_ROUND_UP_ULL(state->period, 2);
135 		state->polarity = PWM_POLARITY_NORMAL;
136 		state->enabled = true;
137 		return;
138 	}
139 
140 	if ((PWM_REG_PRESCAL(val, pwm->hwpwm) == PWM_PRESCAL_MASK) &&
141 	    sun4i_pwm->data->has_prescaler_bypass)
142 		prescaler = 1;
143 	else
144 		prescaler = prescaler_table[PWM_REG_PRESCAL(val, pwm->hwpwm)];
145 
146 	if (prescaler == 0)
147 		return;
148 
149 	if (val & BIT_CH(PWM_ACT_STATE, pwm->hwpwm))
150 		state->polarity = PWM_POLARITY_NORMAL;
151 	else
152 		state->polarity = PWM_POLARITY_INVERSED;
153 
154 	if ((val & BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm)) ==
155 	    BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm))
156 		state->enabled = true;
157 	else
158 		state->enabled = false;
159 
160 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm));
161 
162 	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
163 	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
164 
165 	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
166 	state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
167 }
168 
169 static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
170 			       const struct pwm_state *state,
171 			       u32 *dty, u32 *prd, unsigned int *prsclr,
172 			       bool *bypass)
173 {
174 	u64 clk_rate, div = 0;
175 	unsigned int prescaler = 0;
176 
177 	clk_rate = clk_get_rate(sun4i_pwm->clk);
178 
179 	*bypass = sun4i_pwm->data->has_direct_mod_clk_output &&
180 		  state->enabled &&
181 		  (state->period * clk_rate >= NSEC_PER_SEC) &&
182 		  (state->period * clk_rate < 2 * NSEC_PER_SEC) &&
183 		  (state->duty_cycle * clk_rate * 2 >= NSEC_PER_SEC);
184 
185 	/* Skip calculation of other parameters if we bypass them */
186 	if (*bypass)
187 		return 0;
188 
189 	if (sun4i_pwm->data->has_prescaler_bypass) {
190 		/* First, test without any prescaler when available */
191 		prescaler = PWM_PRESCAL_MASK;
192 		/*
193 		 * When not using any prescaler, the clock period in nanoseconds
194 		 * is not an integer so round it half up instead of
195 		 * truncating to get less surprising values.
196 		 */
197 		div = clk_rate * state->period + NSEC_PER_SEC / 2;
198 		do_div(div, NSEC_PER_SEC);
199 		if (div - 1 > PWM_PRD_MASK)
200 			prescaler = 0;
201 	}
202 
203 	if (prescaler == 0) {
204 		/* Go up from the first divider */
205 		for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) {
206 			unsigned int pval = prescaler_table[prescaler];
207 
208 			if (!pval)
209 				continue;
210 
211 			div = clk_rate;
212 			do_div(div, pval);
213 			div = div * state->period;
214 			do_div(div, NSEC_PER_SEC);
215 			if (div - 1 <= PWM_PRD_MASK)
216 				break;
217 		}
218 
219 		if (div - 1 > PWM_PRD_MASK)
220 			return -EINVAL;
221 	}
222 
223 	*prd = div;
224 	div *= state->duty_cycle;
225 	do_div(div, state->period);
226 	*dty = div;
227 	*prsclr = prescaler;
228 
229 	return 0;
230 }
231 
232 static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
233 			   const struct pwm_state *state)
234 {
235 	struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
236 	struct pwm_state cstate;
237 	u32 ctrl, duty = 0, period = 0, val;
238 	int ret;
239 	unsigned int delay_us, prescaler = 0;
240 	unsigned long now;
241 	bool bypass;
242 
243 	pwm_get_state(pwm, &cstate);
244 
245 	if (!cstate.enabled) {
246 		ret = clk_prepare_enable(sun4i_pwm->clk);
247 		if (ret) {
248 			dev_err(chip->dev, "failed to enable PWM clock\n");
249 			return ret;
250 		}
251 	}
252 
253 	ret = sun4i_pwm_calculate(sun4i_pwm, state, &duty, &period, &prescaler,
254 				  &bypass);
255 	if (ret) {
256 		dev_err(chip->dev, "period exceeds the maximum value\n");
257 		if (!cstate.enabled)
258 			clk_disable_unprepare(sun4i_pwm->clk);
259 		return ret;
260 	}
261 
262 	spin_lock(&sun4i_pwm->ctrl_lock);
263 	ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
264 
265 	if (sun4i_pwm->data->has_direct_mod_clk_output) {
266 		if (bypass) {
267 			ctrl |= BIT_CH(PWM_BYPASS, pwm->hwpwm);
268 			/* We can skip other parameter */
269 			sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
270 			spin_unlock(&sun4i_pwm->ctrl_lock);
271 			return 0;
272 		}
273 
274 		ctrl &= ~BIT_CH(PWM_BYPASS, pwm->hwpwm);
275 	}
276 
277 	if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) {
278 		/* Prescaler changed, the clock has to be gated */
279 		ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
280 		sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
281 
282 		ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
283 		ctrl |= BIT_CH(prescaler, pwm->hwpwm);
284 	}
285 
286 	val = (duty & PWM_DTY_MASK) | PWM_PRD(period);
287 	sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
288 	sun4i_pwm->next_period[pwm->hwpwm] = jiffies +
289 		usecs_to_jiffies(cstate.period / 1000 + 1);
290 	sun4i_pwm->needs_delay[pwm->hwpwm] = true;
291 
292 	if (state->polarity != PWM_POLARITY_NORMAL)
293 		ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
294 	else
295 		ctrl |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
296 
297 	ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
298 
299 	if (state->enabled) {
300 		ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
301 	} else if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
302 		ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
303 		ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
304 	}
305 
306 	sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
307 
308 	spin_unlock(&sun4i_pwm->ctrl_lock);
309 
310 	if (state->enabled)
311 		return 0;
312 
313 	if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
314 		clk_disable_unprepare(sun4i_pwm->clk);
315 		return 0;
316 	}
317 
318 	/* We need a full period to elapse before disabling the channel. */
319 	now = jiffies;
320 	if (sun4i_pwm->needs_delay[pwm->hwpwm] &&
321 	    time_before(now, sun4i_pwm->next_period[pwm->hwpwm])) {
322 		delay_us = jiffies_to_usecs(sun4i_pwm->next_period[pwm->hwpwm] -
323 					   now);
324 		if ((delay_us / 500) > MAX_UDELAY_MS)
325 			msleep(delay_us / 1000 + 1);
326 		else
327 			usleep_range(delay_us, delay_us * 2);
328 	}
329 	sun4i_pwm->needs_delay[pwm->hwpwm] = false;
330 
331 	spin_lock(&sun4i_pwm->ctrl_lock);
332 	ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
333 	ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
334 	ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
335 	sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
336 	spin_unlock(&sun4i_pwm->ctrl_lock);
337 
338 	clk_disable_unprepare(sun4i_pwm->clk);
339 
340 	return 0;
341 }
342 
343 static const struct pwm_ops sun4i_pwm_ops = {
344 	.apply = sun4i_pwm_apply,
345 	.get_state = sun4i_pwm_get_state,
346 	.owner = THIS_MODULE,
347 };
348 
349 static const struct sun4i_pwm_data sun4i_pwm_dual_nobypass = {
350 	.has_prescaler_bypass = false,
351 	.npwm = 2,
352 };
353 
354 static const struct sun4i_pwm_data sun4i_pwm_dual_bypass = {
355 	.has_prescaler_bypass = true,
356 	.npwm = 2,
357 };
358 
359 static const struct sun4i_pwm_data sun4i_pwm_single_bypass = {
360 	.has_prescaler_bypass = true,
361 	.npwm = 1,
362 };
363 
364 static const struct sun4i_pwm_data sun50i_h6_pwm_data = {
365 	.has_prescaler_bypass = true,
366 	.has_direct_mod_clk_output = true,
367 	.npwm = 2,
368 };
369 
370 static const struct of_device_id sun4i_pwm_dt_ids[] = {
371 	{
372 		.compatible = "allwinner,sun4i-a10-pwm",
373 		.data = &sun4i_pwm_dual_nobypass,
374 	}, {
375 		.compatible = "allwinner,sun5i-a10s-pwm",
376 		.data = &sun4i_pwm_dual_bypass,
377 	}, {
378 		.compatible = "allwinner,sun5i-a13-pwm",
379 		.data = &sun4i_pwm_single_bypass,
380 	}, {
381 		.compatible = "allwinner,sun7i-a20-pwm",
382 		.data = &sun4i_pwm_dual_bypass,
383 	}, {
384 		.compatible = "allwinner,sun8i-h3-pwm",
385 		.data = &sun4i_pwm_single_bypass,
386 	}, {
387 		.compatible = "allwinner,sun50i-h6-pwm",
388 		.data = &sun50i_h6_pwm_data,
389 	}, {
390 		/* sentinel */
391 	},
392 };
393 MODULE_DEVICE_TABLE(of, sun4i_pwm_dt_ids);
394 
395 static int sun4i_pwm_probe(struct platform_device *pdev)
396 {
397 	struct sun4i_pwm_chip *pwm;
398 	struct resource *res;
399 	int ret;
400 
401 	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
402 	if (!pwm)
403 		return -ENOMEM;
404 
405 	pwm->data = of_device_get_match_data(&pdev->dev);
406 	if (!pwm->data)
407 		return -ENODEV;
408 
409 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
410 	pwm->base = devm_ioremap_resource(&pdev->dev, res);
411 	if (IS_ERR(pwm->base))
412 		return PTR_ERR(pwm->base);
413 
414 	/*
415 	 * All hardware variants need a source clock that is divided and
416 	 * then feeds the counter that defines the output wave form. In the
417 	 * device tree this clock is either unnamed or called "mod".
418 	 * Some variants (e.g. H6) need another clock to access the
419 	 * hardware registers; this is called "bus".
420 	 * So we request "mod" first (and ignore the corner case that a
421 	 * parent provides a "mod" clock while the right one would be the
422 	 * unnamed one of the PWM device) and if this is not found we fall
423 	 * back to the first clock of the PWM.
424 	 */
425 	pwm->clk = devm_clk_get_optional(&pdev->dev, "mod");
426 	if (IS_ERR(pwm->clk)) {
427 		if (PTR_ERR(pwm->clk) != -EPROBE_DEFER)
428 			dev_err(&pdev->dev, "get mod clock failed %pe\n",
429 				pwm->clk);
430 		return PTR_ERR(pwm->clk);
431 	}
432 
433 	if (!pwm->clk) {
434 		pwm->clk = devm_clk_get(&pdev->dev, NULL);
435 		if (IS_ERR(pwm->clk)) {
436 			if (PTR_ERR(pwm->clk) != -EPROBE_DEFER)
437 				dev_err(&pdev->dev, "get unnamed clock failed %pe\n",
438 					pwm->clk);
439 			return PTR_ERR(pwm->clk);
440 		}
441 	}
442 
443 	pwm->bus_clk = devm_clk_get_optional(&pdev->dev, "bus");
444 	if (IS_ERR(pwm->bus_clk)) {
445 		if (PTR_ERR(pwm->bus_clk) != -EPROBE_DEFER)
446 			dev_err(&pdev->dev, "get bus clock failed %pe\n",
447 				pwm->bus_clk);
448 		return PTR_ERR(pwm->bus_clk);
449 	}
450 
451 	pwm->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
452 	if (IS_ERR(pwm->rst)) {
453 		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
454 			dev_err(&pdev->dev, "get reset failed %pe\n",
455 				pwm->rst);
456 		return PTR_ERR(pwm->rst);
457 	}
458 
459 	/* Deassert reset */
460 	ret = reset_control_deassert(pwm->rst);
461 	if (ret) {
462 		dev_err(&pdev->dev, "cannot deassert reset control: %pe\n",
463 			ERR_PTR(ret));
464 		return ret;
465 	}
466 
467 	/*
468 	 * We're keeping the bus clock on for the sake of simplicity.
469 	 * Actually it only needs to be on for hardware register accesses.
470 	 */
471 	ret = clk_prepare_enable(pwm->bus_clk);
472 	if (ret) {
473 		dev_err(&pdev->dev, "cannot prepare and enable bus_clk %pe\n",
474 			ERR_PTR(ret));
475 		goto err_bus;
476 	}
477 
478 	pwm->chip.dev = &pdev->dev;
479 	pwm->chip.ops = &sun4i_pwm_ops;
480 	pwm->chip.base = -1;
481 	pwm->chip.npwm = pwm->data->npwm;
482 	pwm->chip.of_xlate = of_pwm_xlate_with_flags;
483 	pwm->chip.of_pwm_n_cells = 3;
484 
485 	spin_lock_init(&pwm->ctrl_lock);
486 
487 	ret = pwmchip_add(&pwm->chip);
488 	if (ret < 0) {
489 		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
490 		goto err_pwm_add;
491 	}
492 
493 	platform_set_drvdata(pdev, pwm);
494 
495 	return 0;
496 
497 err_pwm_add:
498 	clk_disable_unprepare(pwm->bus_clk);
499 err_bus:
500 	reset_control_assert(pwm->rst);
501 
502 	return ret;
503 }
504 
505 static int sun4i_pwm_remove(struct platform_device *pdev)
506 {
507 	struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev);
508 	int ret;
509 
510 	ret = pwmchip_remove(&pwm->chip);
511 	if (ret)
512 		return ret;
513 
514 	clk_disable_unprepare(pwm->bus_clk);
515 	reset_control_assert(pwm->rst);
516 
517 	return 0;
518 }
519 
520 static struct platform_driver sun4i_pwm_driver = {
521 	.driver = {
522 		.name = "sun4i-pwm",
523 		.of_match_table = sun4i_pwm_dt_ids,
524 	},
525 	.probe = sun4i_pwm_probe,
526 	.remove = sun4i_pwm_remove,
527 };
528 module_platform_driver(sun4i_pwm_driver);
529 
530 MODULE_ALIAS("platform:sun4i-pwm");
531 MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
532 MODULE_DESCRIPTION("Allwinner sun4i PWM driver");
533 MODULE_LICENSE("GPL v2");
534