1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Driver for Allwinner sun4i Pulse Width Modulation Controller 4 * 5 * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com> 6 * 7 * Limitations: 8 * - When outputing the source clock directly, the PWM logic will be bypassed 9 * and the currently running period is not guaranteed to be completed 10 */ 11 12 #include <linux/bitops.h> 13 #include <linux/clk.h> 14 #include <linux/delay.h> 15 #include <linux/err.h> 16 #include <linux/io.h> 17 #include <linux/jiffies.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/of_device.h> 21 #include <linux/platform_device.h> 22 #include <linux/pwm.h> 23 #include <linux/reset.h> 24 #include <linux/slab.h> 25 #include <linux/spinlock.h> 26 #include <linux/time.h> 27 28 #define PWM_CTRL_REG 0x0 29 30 #define PWM_CH_PRD_BASE 0x4 31 #define PWM_CH_PRD_OFFSET 0x4 32 #define PWM_CH_PRD(ch) (PWM_CH_PRD_BASE + PWM_CH_PRD_OFFSET * (ch)) 33 34 #define PWMCH_OFFSET 15 35 #define PWM_PRESCAL_MASK GENMASK(3, 0) 36 #define PWM_PRESCAL_OFF 0 37 #define PWM_EN BIT(4) 38 #define PWM_ACT_STATE BIT(5) 39 #define PWM_CLK_GATING BIT(6) 40 #define PWM_MODE BIT(7) 41 #define PWM_PULSE BIT(8) 42 #define PWM_BYPASS BIT(9) 43 44 #define PWM_RDY_BASE 28 45 #define PWM_RDY_OFFSET 1 46 #define PWM_RDY(ch) BIT(PWM_RDY_BASE + PWM_RDY_OFFSET * (ch)) 47 48 #define PWM_PRD(prd) (((prd) - 1) << 16) 49 #define PWM_PRD_MASK GENMASK(15, 0) 50 51 #define PWM_DTY_MASK GENMASK(15, 0) 52 53 #define PWM_REG_PRD(reg) ((((reg) >> 16) & PWM_PRD_MASK) + 1) 54 #define PWM_REG_DTY(reg) ((reg) & PWM_DTY_MASK) 55 #define PWM_REG_PRESCAL(reg, chan) (((reg) >> ((chan) * PWMCH_OFFSET)) & PWM_PRESCAL_MASK) 56 57 #define BIT_CH(bit, chan) ((bit) << ((chan) * PWMCH_OFFSET)) 58 59 static const u32 prescaler_table[] = { 60 120, 61 180, 62 240, 63 360, 64 480, 65 0, 66 0, 67 0, 68 12000, 69 24000, 70 36000, 71 48000, 72 72000, 73 0, 74 0, 75 0, /* Actually 1 but tested separately */ 76 }; 77 78 struct sun4i_pwm_data { 79 bool has_prescaler_bypass; 80 bool has_direct_mod_clk_output; 81 unsigned int npwm; 82 }; 83 84 struct sun4i_pwm_chip { 85 struct pwm_chip chip; 86 struct clk *bus_clk; 87 struct clk *clk; 88 struct reset_control *rst; 89 void __iomem *base; 90 spinlock_t ctrl_lock; 91 const struct sun4i_pwm_data *data; 92 }; 93 94 static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip) 95 { 96 return container_of(chip, struct sun4i_pwm_chip, chip); 97 } 98 99 static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *chip, 100 unsigned long offset) 101 { 102 return readl(chip->base + offset); 103 } 104 105 static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip, 106 u32 val, unsigned long offset) 107 { 108 writel(val, chip->base + offset); 109 } 110 111 static int sun4i_pwm_get_state(struct pwm_chip *chip, 112 struct pwm_device *pwm, 113 struct pwm_state *state) 114 { 115 struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); 116 u64 clk_rate, tmp; 117 u32 val; 118 unsigned int prescaler; 119 120 clk_rate = clk_get_rate(sun4i_pwm->clk); 121 if (!clk_rate) 122 return -EINVAL; 123 124 val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); 125 126 /* 127 * PWM chapter in H6 manual has a diagram which explains that if bypass 128 * bit is set, no other setting has any meaning. Even more, experiment 129 * proved that also enable bit is ignored in this case. 130 */ 131 if ((val & BIT_CH(PWM_BYPASS, pwm->hwpwm)) && 132 sun4i_pwm->data->has_direct_mod_clk_output) { 133 state->period = DIV_ROUND_UP_ULL(NSEC_PER_SEC, clk_rate); 134 state->duty_cycle = DIV_ROUND_UP_ULL(state->period, 2); 135 state->polarity = PWM_POLARITY_NORMAL; 136 state->enabled = true; 137 return 0; 138 } 139 140 if ((PWM_REG_PRESCAL(val, pwm->hwpwm) == PWM_PRESCAL_MASK) && 141 sun4i_pwm->data->has_prescaler_bypass) 142 prescaler = 1; 143 else 144 prescaler = prescaler_table[PWM_REG_PRESCAL(val, pwm->hwpwm)]; 145 146 if (prescaler == 0) 147 return -EINVAL; 148 149 if (val & BIT_CH(PWM_ACT_STATE, pwm->hwpwm)) 150 state->polarity = PWM_POLARITY_NORMAL; 151 else 152 state->polarity = PWM_POLARITY_INVERSED; 153 154 if ((val & BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm)) == 155 BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm)) 156 state->enabled = true; 157 else 158 state->enabled = false; 159 160 val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm)); 161 162 tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_DTY(val); 163 state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate); 164 165 tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_PRD(val); 166 state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate); 167 168 return 0; 169 } 170 171 static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm, 172 const struct pwm_state *state, 173 u32 *dty, u32 *prd, unsigned int *prsclr, 174 bool *bypass) 175 { 176 u64 clk_rate, div = 0; 177 unsigned int prescaler = 0; 178 179 clk_rate = clk_get_rate(sun4i_pwm->clk); 180 181 *bypass = sun4i_pwm->data->has_direct_mod_clk_output && 182 state->enabled && 183 (state->period * clk_rate >= NSEC_PER_SEC) && 184 (state->period * clk_rate < 2 * NSEC_PER_SEC) && 185 (state->duty_cycle * clk_rate * 2 >= NSEC_PER_SEC); 186 187 /* Skip calculation of other parameters if we bypass them */ 188 if (*bypass) 189 return 0; 190 191 if (sun4i_pwm->data->has_prescaler_bypass) { 192 /* First, test without any prescaler when available */ 193 prescaler = PWM_PRESCAL_MASK; 194 /* 195 * When not using any prescaler, the clock period in nanoseconds 196 * is not an integer so round it half up instead of 197 * truncating to get less surprising values. 198 */ 199 div = clk_rate * state->period + NSEC_PER_SEC / 2; 200 do_div(div, NSEC_PER_SEC); 201 if (div - 1 > PWM_PRD_MASK) 202 prescaler = 0; 203 } 204 205 if (prescaler == 0) { 206 /* Go up from the first divider */ 207 for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) { 208 unsigned int pval = prescaler_table[prescaler]; 209 210 if (!pval) 211 continue; 212 213 div = clk_rate; 214 do_div(div, pval); 215 div = div * state->period; 216 do_div(div, NSEC_PER_SEC); 217 if (div - 1 <= PWM_PRD_MASK) 218 break; 219 } 220 221 if (div - 1 > PWM_PRD_MASK) 222 return -EINVAL; 223 } 224 225 *prd = div; 226 div *= state->duty_cycle; 227 do_div(div, state->period); 228 *dty = div; 229 *prsclr = prescaler; 230 231 return 0; 232 } 233 234 static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, 235 const struct pwm_state *state) 236 { 237 struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); 238 struct pwm_state cstate; 239 u32 ctrl, duty = 0, period = 0, val; 240 int ret; 241 unsigned int delay_us, prescaler = 0; 242 bool bypass; 243 244 pwm_get_state(pwm, &cstate); 245 246 if (!cstate.enabled) { 247 ret = clk_prepare_enable(sun4i_pwm->clk); 248 if (ret) { 249 dev_err(chip->dev, "failed to enable PWM clock\n"); 250 return ret; 251 } 252 } 253 254 ret = sun4i_pwm_calculate(sun4i_pwm, state, &duty, &period, &prescaler, 255 &bypass); 256 if (ret) { 257 dev_err(chip->dev, "period exceeds the maximum value\n"); 258 if (!cstate.enabled) 259 clk_disable_unprepare(sun4i_pwm->clk); 260 return ret; 261 } 262 263 spin_lock(&sun4i_pwm->ctrl_lock); 264 ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); 265 266 if (sun4i_pwm->data->has_direct_mod_clk_output) { 267 if (bypass) { 268 ctrl |= BIT_CH(PWM_BYPASS, pwm->hwpwm); 269 /* We can skip other parameter */ 270 sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG); 271 spin_unlock(&sun4i_pwm->ctrl_lock); 272 return 0; 273 } 274 275 ctrl &= ~BIT_CH(PWM_BYPASS, pwm->hwpwm); 276 } 277 278 if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) { 279 /* Prescaler changed, the clock has to be gated */ 280 ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); 281 sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG); 282 283 ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm); 284 ctrl |= BIT_CH(prescaler, pwm->hwpwm); 285 } 286 287 val = (duty & PWM_DTY_MASK) | PWM_PRD(period); 288 sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm)); 289 290 if (state->polarity != PWM_POLARITY_NORMAL) 291 ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm); 292 else 293 ctrl |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm); 294 295 ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm); 296 297 if (state->enabled) 298 ctrl |= BIT_CH(PWM_EN, pwm->hwpwm); 299 300 sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG); 301 302 spin_unlock(&sun4i_pwm->ctrl_lock); 303 304 if (state->enabled) 305 return 0; 306 307 /* We need a full period to elapse before disabling the channel. */ 308 delay_us = DIV_ROUND_UP_ULL(cstate.period, NSEC_PER_USEC); 309 if ((delay_us / 500) > MAX_UDELAY_MS) 310 msleep(delay_us / 1000 + 1); 311 else 312 usleep_range(delay_us, delay_us * 2); 313 314 spin_lock(&sun4i_pwm->ctrl_lock); 315 ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); 316 ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); 317 ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm); 318 sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG); 319 spin_unlock(&sun4i_pwm->ctrl_lock); 320 321 clk_disable_unprepare(sun4i_pwm->clk); 322 323 return 0; 324 } 325 326 static const struct pwm_ops sun4i_pwm_ops = { 327 .apply = sun4i_pwm_apply, 328 .get_state = sun4i_pwm_get_state, 329 .owner = THIS_MODULE, 330 }; 331 332 static const struct sun4i_pwm_data sun4i_pwm_dual_nobypass = { 333 .has_prescaler_bypass = false, 334 .npwm = 2, 335 }; 336 337 static const struct sun4i_pwm_data sun4i_pwm_dual_bypass = { 338 .has_prescaler_bypass = true, 339 .npwm = 2, 340 }; 341 342 static const struct sun4i_pwm_data sun4i_pwm_single_bypass = { 343 .has_prescaler_bypass = true, 344 .npwm = 1, 345 }; 346 347 static const struct sun4i_pwm_data sun50i_a64_pwm_data = { 348 .has_prescaler_bypass = true, 349 .has_direct_mod_clk_output = true, 350 .npwm = 1, 351 }; 352 353 static const struct sun4i_pwm_data sun50i_h6_pwm_data = { 354 .has_prescaler_bypass = true, 355 .has_direct_mod_clk_output = true, 356 .npwm = 2, 357 }; 358 359 static const struct of_device_id sun4i_pwm_dt_ids[] = { 360 { 361 .compatible = "allwinner,sun4i-a10-pwm", 362 .data = &sun4i_pwm_dual_nobypass, 363 }, { 364 .compatible = "allwinner,sun5i-a10s-pwm", 365 .data = &sun4i_pwm_dual_bypass, 366 }, { 367 .compatible = "allwinner,sun5i-a13-pwm", 368 .data = &sun4i_pwm_single_bypass, 369 }, { 370 .compatible = "allwinner,sun7i-a20-pwm", 371 .data = &sun4i_pwm_dual_bypass, 372 }, { 373 .compatible = "allwinner,sun8i-h3-pwm", 374 .data = &sun4i_pwm_single_bypass, 375 }, { 376 .compatible = "allwinner,sun50i-a64-pwm", 377 .data = &sun50i_a64_pwm_data, 378 }, { 379 .compatible = "allwinner,sun50i-h6-pwm", 380 .data = &sun50i_h6_pwm_data, 381 }, { 382 /* sentinel */ 383 }, 384 }; 385 MODULE_DEVICE_TABLE(of, sun4i_pwm_dt_ids); 386 387 static int sun4i_pwm_probe(struct platform_device *pdev) 388 { 389 struct sun4i_pwm_chip *sun4ichip; 390 int ret; 391 392 sun4ichip = devm_kzalloc(&pdev->dev, sizeof(*sun4ichip), GFP_KERNEL); 393 if (!sun4ichip) 394 return -ENOMEM; 395 396 sun4ichip->data = of_device_get_match_data(&pdev->dev); 397 if (!sun4ichip->data) 398 return -ENODEV; 399 400 sun4ichip->base = devm_platform_ioremap_resource(pdev, 0); 401 if (IS_ERR(sun4ichip->base)) 402 return PTR_ERR(sun4ichip->base); 403 404 /* 405 * All hardware variants need a source clock that is divided and 406 * then feeds the counter that defines the output wave form. In the 407 * device tree this clock is either unnamed or called "mod". 408 * Some variants (e.g. H6) need another clock to access the 409 * hardware registers; this is called "bus". 410 * So we request "mod" first (and ignore the corner case that a 411 * parent provides a "mod" clock while the right one would be the 412 * unnamed one of the PWM device) and if this is not found we fall 413 * back to the first clock of the PWM. 414 */ 415 sun4ichip->clk = devm_clk_get_optional(&pdev->dev, "mod"); 416 if (IS_ERR(sun4ichip->clk)) 417 return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->clk), 418 "get mod clock failed\n"); 419 420 if (!sun4ichip->clk) { 421 sun4ichip->clk = devm_clk_get(&pdev->dev, NULL); 422 if (IS_ERR(sun4ichip->clk)) 423 return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->clk), 424 "get unnamed clock failed\n"); 425 } 426 427 sun4ichip->bus_clk = devm_clk_get_optional(&pdev->dev, "bus"); 428 if (IS_ERR(sun4ichip->bus_clk)) 429 return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->bus_clk), 430 "get bus clock failed\n"); 431 432 sun4ichip->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL); 433 if (IS_ERR(sun4ichip->rst)) 434 return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->rst), 435 "get reset failed\n"); 436 437 /* Deassert reset */ 438 ret = reset_control_deassert(sun4ichip->rst); 439 if (ret) { 440 dev_err(&pdev->dev, "cannot deassert reset control: %pe\n", 441 ERR_PTR(ret)); 442 return ret; 443 } 444 445 /* 446 * We're keeping the bus clock on for the sake of simplicity. 447 * Actually it only needs to be on for hardware register accesses. 448 */ 449 ret = clk_prepare_enable(sun4ichip->bus_clk); 450 if (ret) { 451 dev_err(&pdev->dev, "cannot prepare and enable bus_clk %pe\n", 452 ERR_PTR(ret)); 453 goto err_bus; 454 } 455 456 sun4ichip->chip.dev = &pdev->dev; 457 sun4ichip->chip.ops = &sun4i_pwm_ops; 458 sun4ichip->chip.npwm = sun4ichip->data->npwm; 459 460 spin_lock_init(&sun4ichip->ctrl_lock); 461 462 ret = pwmchip_add(&sun4ichip->chip); 463 if (ret < 0) { 464 dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); 465 goto err_pwm_add; 466 } 467 468 platform_set_drvdata(pdev, sun4ichip); 469 470 return 0; 471 472 err_pwm_add: 473 clk_disable_unprepare(sun4ichip->bus_clk); 474 err_bus: 475 reset_control_assert(sun4ichip->rst); 476 477 return ret; 478 } 479 480 static void sun4i_pwm_remove(struct platform_device *pdev) 481 { 482 struct sun4i_pwm_chip *sun4ichip = platform_get_drvdata(pdev); 483 484 pwmchip_remove(&sun4ichip->chip); 485 486 clk_disable_unprepare(sun4ichip->bus_clk); 487 reset_control_assert(sun4ichip->rst); 488 } 489 490 static struct platform_driver sun4i_pwm_driver = { 491 .driver = { 492 .name = "sun4i-pwm", 493 .of_match_table = sun4i_pwm_dt_ids, 494 }, 495 .probe = sun4i_pwm_probe, 496 .remove_new = sun4i_pwm_remove, 497 }; 498 module_platform_driver(sun4i_pwm_driver); 499 500 MODULE_ALIAS("platform:sun4i-pwm"); 501 MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>"); 502 MODULE_DESCRIPTION("Allwinner sun4i PWM driver"); 503 MODULE_LICENSE("GPL v2"); 504