xref: /openbmc/linux/drivers/pwm/pwm-stm32-lp.c (revision b737eecd)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * STM32 Low-Power Timer PWM driver
4  *
5  * Copyright (C) STMicroelectronics 2017
6  *
7  * Author: Gerald Baeza <gerald.baeza@st.com>
8  *
9  * Inspired by Gerald Baeza's pwm-stm32 driver
10  */
11 
12 #include <linux/bitfield.h>
13 #include <linux/mfd/stm32-lptimer.h>
14 #include <linux/module.h>
15 #include <linux/of.h>
16 #include <linux/pinctrl/consumer.h>
17 #include <linux/platform_device.h>
18 #include <linux/pwm.h>
19 
20 struct stm32_pwm_lp {
21 	struct pwm_chip chip;
22 	struct clk *clk;
23 	struct regmap *regmap;
24 };
25 
26 static inline struct stm32_pwm_lp *to_stm32_pwm_lp(struct pwm_chip *chip)
27 {
28 	return container_of(chip, struct stm32_pwm_lp, chip);
29 }
30 
31 /* STM32 Low-Power Timer is preceded by a configurable power-of-2 prescaler */
32 #define STM32_LPTIM_MAX_PRESCALER	128
33 
34 static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm,
35 			      const struct pwm_state *state)
36 {
37 	struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
38 	unsigned long long prd, div, dty;
39 	struct pwm_state cstate;
40 	u32 val, mask, cfgr, presc = 0;
41 	bool reenable;
42 	int ret;
43 
44 	pwm_get_state(pwm, &cstate);
45 	reenable = !cstate.enabled;
46 
47 	if (!state->enabled) {
48 		if (cstate.enabled) {
49 			/* Disable LP timer */
50 			ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
51 			if (ret)
52 				return ret;
53 			/* disable clock to PWM counter */
54 			clk_disable(priv->clk);
55 		}
56 		return 0;
57 	}
58 
59 	/* Calculate the period and prescaler value */
60 	div = (unsigned long long)clk_get_rate(priv->clk) * state->period;
61 	do_div(div, NSEC_PER_SEC);
62 	if (!div) {
63 		/* Clock is too slow to achieve requested period. */
64 		dev_dbg(priv->chip.dev, "Can't reach %llu ns\n", state->period);
65 		return -EINVAL;
66 	}
67 
68 	prd = div;
69 	while (div > STM32_LPTIM_MAX_ARR) {
70 		presc++;
71 		if ((1 << presc) > STM32_LPTIM_MAX_PRESCALER) {
72 			dev_err(priv->chip.dev, "max prescaler exceeded\n");
73 			return -EINVAL;
74 		}
75 		div = prd >> presc;
76 	}
77 	prd = div;
78 
79 	/* Calculate the duty cycle */
80 	dty = prd * state->duty_cycle;
81 	do_div(dty, state->period);
82 
83 	if (!cstate.enabled) {
84 		/* enable clock to drive PWM counter */
85 		ret = clk_enable(priv->clk);
86 		if (ret)
87 			return ret;
88 	}
89 
90 	ret = regmap_read(priv->regmap, STM32_LPTIM_CFGR, &cfgr);
91 	if (ret)
92 		goto err;
93 
94 	if ((FIELD_GET(STM32_LPTIM_PRESC, cfgr) != presc) ||
95 	    (FIELD_GET(STM32_LPTIM_WAVPOL, cfgr) != state->polarity)) {
96 		val = FIELD_PREP(STM32_LPTIM_PRESC, presc);
97 		val |= FIELD_PREP(STM32_LPTIM_WAVPOL, state->polarity);
98 		mask = STM32_LPTIM_PRESC | STM32_LPTIM_WAVPOL;
99 
100 		/* Must disable LP timer to modify CFGR */
101 		reenable = true;
102 		ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
103 		if (ret)
104 			goto err;
105 
106 		ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask,
107 					 val);
108 		if (ret)
109 			goto err;
110 	}
111 
112 	if (reenable) {
113 		/* Must (re)enable LP timer to modify CMP & ARR */
114 		ret = regmap_write(priv->regmap, STM32_LPTIM_CR,
115 				   STM32_LPTIM_ENABLE);
116 		if (ret)
117 			goto err;
118 	}
119 
120 	ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, prd - 1);
121 	if (ret)
122 		goto err;
123 
124 	ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, prd - (1 + dty));
125 	if (ret)
126 		goto err;
127 
128 	/* ensure CMP & ARR registers are properly written */
129 	ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
130 				       (val & STM32_LPTIM_CMPOK_ARROK),
131 				       100, 1000);
132 	if (ret) {
133 		dev_err(priv->chip.dev, "ARR/CMP registers write issue\n");
134 		goto err;
135 	}
136 	ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
137 			   STM32_LPTIM_CMPOKCF_ARROKCF);
138 	if (ret)
139 		goto err;
140 
141 	if (reenable) {
142 		/* Start LP timer in continuous mode */
143 		ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CR,
144 					 STM32_LPTIM_CNTSTRT,
145 					 STM32_LPTIM_CNTSTRT);
146 		if (ret) {
147 			regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
148 			goto err;
149 		}
150 	}
151 
152 	return 0;
153 err:
154 	if (!cstate.enabled)
155 		clk_disable(priv->clk);
156 
157 	return ret;
158 }
159 
160 static void stm32_pwm_lp_get_state(struct pwm_chip *chip,
161 				   struct pwm_device *pwm,
162 				   struct pwm_state *state)
163 {
164 	struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
165 	unsigned long rate = clk_get_rate(priv->clk);
166 	u32 val, presc, prd;
167 	u64 tmp;
168 
169 	regmap_read(priv->regmap, STM32_LPTIM_CR, &val);
170 	state->enabled = !!FIELD_GET(STM32_LPTIM_ENABLE, val);
171 	/* Keep PWM counter clock refcount in sync with PWM initial state */
172 	if (state->enabled)
173 		clk_enable(priv->clk);
174 
175 	regmap_read(priv->regmap, STM32_LPTIM_CFGR, &val);
176 	presc = FIELD_GET(STM32_LPTIM_PRESC, val);
177 	state->polarity = FIELD_GET(STM32_LPTIM_WAVPOL, val);
178 
179 	regmap_read(priv->regmap, STM32_LPTIM_ARR, &prd);
180 	tmp = prd + 1;
181 	tmp = (tmp << presc) * NSEC_PER_SEC;
182 	state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
183 
184 	regmap_read(priv->regmap, STM32_LPTIM_CMP, &val);
185 	tmp = prd - val;
186 	tmp = (tmp << presc) * NSEC_PER_SEC;
187 	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
188 }
189 
190 static const struct pwm_ops stm32_pwm_lp_ops = {
191 	.owner = THIS_MODULE,
192 	.apply = stm32_pwm_lp_apply,
193 	.get_state = stm32_pwm_lp_get_state,
194 };
195 
196 static int stm32_pwm_lp_probe(struct platform_device *pdev)
197 {
198 	struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
199 	struct stm32_pwm_lp *priv;
200 	int ret;
201 
202 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
203 	if (!priv)
204 		return -ENOMEM;
205 
206 	priv->regmap = ddata->regmap;
207 	priv->clk = ddata->clk;
208 	priv->chip.base = -1;
209 	priv->chip.dev = &pdev->dev;
210 	priv->chip.ops = &stm32_pwm_lp_ops;
211 	priv->chip.npwm = 1;
212 	priv->chip.of_xlate = of_pwm_xlate_with_flags;
213 	priv->chip.of_pwm_n_cells = 3;
214 
215 	ret = pwmchip_add(&priv->chip);
216 	if (ret < 0)
217 		return ret;
218 
219 	platform_set_drvdata(pdev, priv);
220 
221 	return 0;
222 }
223 
224 static int stm32_pwm_lp_remove(struct platform_device *pdev)
225 {
226 	struct stm32_pwm_lp *priv = platform_get_drvdata(pdev);
227 
228 	pwm_disable(&priv->chip.pwms[0]);
229 
230 	return pwmchip_remove(&priv->chip);
231 }
232 
233 static int __maybe_unused stm32_pwm_lp_suspend(struct device *dev)
234 {
235 	struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
236 	struct pwm_state state;
237 
238 	pwm_get_state(&priv->chip.pwms[0], &state);
239 	if (state.enabled) {
240 		dev_err(dev, "The consumer didn't stop us (%s)\n",
241 			priv->chip.pwms[0].label);
242 		return -EBUSY;
243 	}
244 
245 	return pinctrl_pm_select_sleep_state(dev);
246 }
247 
248 static int __maybe_unused stm32_pwm_lp_resume(struct device *dev)
249 {
250 	return pinctrl_pm_select_default_state(dev);
251 }
252 
253 static SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend,
254 			 stm32_pwm_lp_resume);
255 
256 static const struct of_device_id stm32_pwm_lp_of_match[] = {
257 	{ .compatible = "st,stm32-pwm-lp", },
258 	{},
259 };
260 MODULE_DEVICE_TABLE(of, stm32_pwm_lp_of_match);
261 
262 static struct platform_driver stm32_pwm_lp_driver = {
263 	.probe	= stm32_pwm_lp_probe,
264 	.remove	= stm32_pwm_lp_remove,
265 	.driver	= {
266 		.name = "stm32-pwm-lp",
267 		.of_match_table = of_match_ptr(stm32_pwm_lp_of_match),
268 		.pm = &stm32_pwm_lp_pm_ops,
269 	},
270 };
271 module_platform_driver(stm32_pwm_lp_driver);
272 
273 MODULE_ALIAS("platform:stm32-pwm-lp");
274 MODULE_DESCRIPTION("STMicroelectronics STM32 PWM LP driver");
275 MODULE_LICENSE("GPL v2");
276