xref: /openbmc/linux/drivers/pwm/pwm-spear.c (revision b8d312aa)
1 /*
2  * ST Microelectronics SPEAr Pulse Width Modulator driver
3  *
4  * Copyright (C) 2012 ST Microelectronics
5  * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
6  *
7  * This file is licensed under the terms of the GNU General Public
8  * License version 2. This program is licensed "as is" without any
9  * warranty of any kind, whether express or implied.
10  */
11 
12 #include <linux/clk.h>
13 #include <linux/err.h>
14 #include <linux/io.h>
15 #include <linux/ioport.h>
16 #include <linux/kernel.h>
17 #include <linux/math64.h>
18 #include <linux/module.h>
19 #include <linux/of.h>
20 #include <linux/platform_device.h>
21 #include <linux/pwm.h>
22 #include <linux/slab.h>
23 #include <linux/types.h>
24 
25 #define NUM_PWM		4
26 
27 /* PWM registers and bits definitions */
28 #define PWMCR			0x00	/* Control Register */
29 #define PWMCR_PWM_ENABLE	0x1
30 #define PWMCR_PRESCALE_SHIFT	2
31 #define PWMCR_MIN_PRESCALE	0x00
32 #define PWMCR_MAX_PRESCALE	0x3FFF
33 
34 #define PWMDCR			0x04	/* Duty Cycle Register */
35 #define PWMDCR_MIN_DUTY		0x0001
36 #define PWMDCR_MAX_DUTY		0xFFFF
37 
38 #define PWMPCR			0x08	/* Period Register */
39 #define PWMPCR_MIN_PERIOD	0x0001
40 #define PWMPCR_MAX_PERIOD	0xFFFF
41 
42 /* Following only available on 13xx SoCs */
43 #define PWMMCR			0x3C	/* Master Control Register */
44 #define PWMMCR_PWM_ENABLE	0x1
45 
46 /**
47  * struct spear_pwm_chip - struct representing pwm chip
48  *
49  * @mmio_base: base address of pwm chip
50  * @clk: pointer to clk structure of pwm chip
51  * @chip: linux pwm chip representation
52  */
53 struct spear_pwm_chip {
54 	void __iomem *mmio_base;
55 	struct clk *clk;
56 	struct pwm_chip chip;
57 };
58 
59 static inline struct spear_pwm_chip *to_spear_pwm_chip(struct pwm_chip *chip)
60 {
61 	return container_of(chip, struct spear_pwm_chip, chip);
62 }
63 
64 static inline u32 spear_pwm_readl(struct spear_pwm_chip *chip, unsigned int num,
65 				  unsigned long offset)
66 {
67 	return readl_relaxed(chip->mmio_base + (num << 4) + offset);
68 }
69 
70 static inline void spear_pwm_writel(struct spear_pwm_chip *chip,
71 				    unsigned int num, unsigned long offset,
72 				    unsigned long val)
73 {
74 	writel_relaxed(val, chip->mmio_base + (num << 4) + offset);
75 }
76 
77 static int spear_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
78 			    int duty_ns, int period_ns)
79 {
80 	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
81 	u64 val, div, clk_rate;
82 	unsigned long prescale = PWMCR_MIN_PRESCALE, pv, dc;
83 	int ret;
84 
85 	/*
86 	 * Find pv, dc and prescale to suit duty_ns and period_ns. This is done
87 	 * according to formulas described below:
88 	 *
89 	 * period_ns = 10^9 * (PRESCALE + 1) * PV / PWM_CLK_RATE
90 	 * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
91 	 *
92 	 * PV = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
93 	 * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
94 	 */
95 	clk_rate = clk_get_rate(pc->clk);
96 	while (1) {
97 		div = 1000000000;
98 		div *= 1 + prescale;
99 		val = clk_rate * period_ns;
100 		pv = div64_u64(val, div);
101 		val = clk_rate * duty_ns;
102 		dc = div64_u64(val, div);
103 
104 		/* if duty_ns and period_ns are not achievable then return */
105 		if (pv < PWMPCR_MIN_PERIOD || dc < PWMDCR_MIN_DUTY)
106 			return -EINVAL;
107 
108 		/*
109 		 * if pv and dc have crossed their upper limit, then increase
110 		 * prescale and recalculate pv and dc.
111 		 */
112 		if (pv > PWMPCR_MAX_PERIOD || dc > PWMDCR_MAX_DUTY) {
113 			if (++prescale > PWMCR_MAX_PRESCALE)
114 				return -EINVAL;
115 			continue;
116 		}
117 		break;
118 	}
119 
120 	/*
121 	 * NOTE: the clock to PWM has to be enabled first before writing to the
122 	 * registers.
123 	 */
124 	ret = clk_enable(pc->clk);
125 	if (ret)
126 		return ret;
127 
128 	spear_pwm_writel(pc, pwm->hwpwm, PWMCR,
129 			prescale << PWMCR_PRESCALE_SHIFT);
130 	spear_pwm_writel(pc, pwm->hwpwm, PWMDCR, dc);
131 	spear_pwm_writel(pc, pwm->hwpwm, PWMPCR, pv);
132 	clk_disable(pc->clk);
133 
134 	return 0;
135 }
136 
137 static int spear_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
138 {
139 	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
140 	int rc = 0;
141 	u32 val;
142 
143 	rc = clk_enable(pc->clk);
144 	if (rc)
145 		return rc;
146 
147 	val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
148 	val |= PWMCR_PWM_ENABLE;
149 	spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
150 
151 	return 0;
152 }
153 
154 static void spear_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
155 {
156 	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
157 	u32 val;
158 
159 	val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
160 	val &= ~PWMCR_PWM_ENABLE;
161 	spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
162 
163 	clk_disable(pc->clk);
164 }
165 
166 static const struct pwm_ops spear_pwm_ops = {
167 	.config = spear_pwm_config,
168 	.enable = spear_pwm_enable,
169 	.disable = spear_pwm_disable,
170 	.owner = THIS_MODULE,
171 };
172 
173 static int spear_pwm_probe(struct platform_device *pdev)
174 {
175 	struct device_node *np = pdev->dev.of_node;
176 	struct spear_pwm_chip *pc;
177 	struct resource *r;
178 	int ret;
179 	u32 val;
180 
181 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
182 	if (!pc)
183 		return -ENOMEM;
184 
185 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
186 	pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
187 	if (IS_ERR(pc->mmio_base))
188 		return PTR_ERR(pc->mmio_base);
189 
190 	pc->clk = devm_clk_get(&pdev->dev, NULL);
191 	if (IS_ERR(pc->clk))
192 		return PTR_ERR(pc->clk);
193 
194 	platform_set_drvdata(pdev, pc);
195 
196 	pc->chip.dev = &pdev->dev;
197 	pc->chip.ops = &spear_pwm_ops;
198 	pc->chip.base = -1;
199 	pc->chip.npwm = NUM_PWM;
200 
201 	ret = clk_prepare(pc->clk);
202 	if (ret)
203 		return ret;
204 
205 	if (of_device_is_compatible(np, "st,spear1340-pwm")) {
206 		ret = clk_enable(pc->clk);
207 		if (ret) {
208 			clk_unprepare(pc->clk);
209 			return ret;
210 		}
211 		/*
212 		 * Following enables PWM chip, channels would still be
213 		 * enabled individually through their control register
214 		 */
215 		val = readl_relaxed(pc->mmio_base + PWMMCR);
216 		val |= PWMMCR_PWM_ENABLE;
217 		writel_relaxed(val, pc->mmio_base + PWMMCR);
218 
219 		clk_disable(pc->clk);
220 	}
221 
222 	ret = pwmchip_add(&pc->chip);
223 	if (ret < 0) {
224 		clk_unprepare(pc->clk);
225 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
226 	}
227 
228 	return ret;
229 }
230 
231 static int spear_pwm_remove(struct platform_device *pdev)
232 {
233 	struct spear_pwm_chip *pc = platform_get_drvdata(pdev);
234 	int i;
235 
236 	for (i = 0; i < NUM_PWM; i++)
237 		pwm_disable(&pc->chip.pwms[i]);
238 
239 	/* clk was prepared in probe, hence unprepare it here */
240 	clk_unprepare(pc->clk);
241 	return pwmchip_remove(&pc->chip);
242 }
243 
244 static const struct of_device_id spear_pwm_of_match[] = {
245 	{ .compatible = "st,spear320-pwm" },
246 	{ .compatible = "st,spear1340-pwm" },
247 	{ }
248 };
249 
250 MODULE_DEVICE_TABLE(of, spear_pwm_of_match);
251 
252 static struct platform_driver spear_pwm_driver = {
253 	.driver = {
254 		.name = "spear-pwm",
255 		.of_match_table = spear_pwm_of_match,
256 	},
257 	.probe = spear_pwm_probe,
258 	.remove = spear_pwm_remove,
259 };
260 
261 module_platform_driver(spear_pwm_driver);
262 
263 MODULE_LICENSE("GPL");
264 MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
265 MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>");
266 MODULE_ALIAS("platform:spear-pwm");
267