1 /* 2 * ST Microelectronics SPEAr Pulse Width Modulator driver 3 * 4 * Copyright (C) 2012 ST Microelectronics 5 * Shiraz Hashim <shiraz.hashim@st.com> 6 * 7 * This file is licensed under the terms of the GNU General Public 8 * License version 2. This program is licensed "as is" without any 9 * warranty of any kind, whether express or implied. 10 */ 11 12 #include <linux/clk.h> 13 #include <linux/err.h> 14 #include <linux/io.h> 15 #include <linux/ioport.h> 16 #include <linux/kernel.h> 17 #include <linux/math64.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/platform_device.h> 21 #include <linux/pwm.h> 22 #include <linux/slab.h> 23 #include <linux/types.h> 24 25 #define NUM_PWM 4 26 27 /* PWM registers and bits definitions */ 28 #define PWMCR 0x00 /* Control Register */ 29 #define PWMCR_PWM_ENABLE 0x1 30 #define PWMCR_PRESCALE_SHIFT 2 31 #define PWMCR_MIN_PRESCALE 0x00 32 #define PWMCR_MAX_PRESCALE 0x3FFF 33 34 #define PWMDCR 0x04 /* Duty Cycle Register */ 35 #define PWMDCR_MIN_DUTY 0x0001 36 #define PWMDCR_MAX_DUTY 0xFFFF 37 38 #define PWMPCR 0x08 /* Period Register */ 39 #define PWMPCR_MIN_PERIOD 0x0001 40 #define PWMPCR_MAX_PERIOD 0xFFFF 41 42 /* Following only available on 13xx SoCs */ 43 #define PWMMCR 0x3C /* Master Control Register */ 44 #define PWMMCR_PWM_ENABLE 0x1 45 46 /** 47 * struct spear_pwm_chip - struct representing pwm chip 48 * 49 * @mmio_base: base address of pwm chip 50 * @clk: pointer to clk structure of pwm chip 51 * @chip: linux pwm chip representation 52 */ 53 struct spear_pwm_chip { 54 void __iomem *mmio_base; 55 struct clk *clk; 56 struct pwm_chip chip; 57 }; 58 59 static inline struct spear_pwm_chip *to_spear_pwm_chip(struct pwm_chip *chip) 60 { 61 return container_of(chip, struct spear_pwm_chip, chip); 62 } 63 64 static inline u32 spear_pwm_readl(struct spear_pwm_chip *chip, unsigned int num, 65 unsigned long offset) 66 { 67 return readl_relaxed(chip->mmio_base + (num << 4) + offset); 68 } 69 70 static inline void spear_pwm_writel(struct spear_pwm_chip *chip, 71 unsigned int num, unsigned long offset, 72 unsigned long val) 73 { 74 writel_relaxed(val, chip->mmio_base + (num << 4) + offset); 75 } 76 77 static int spear_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, 78 int duty_ns, int period_ns) 79 { 80 struct spear_pwm_chip *pc = to_spear_pwm_chip(chip); 81 u64 val, div, clk_rate; 82 unsigned long prescale = PWMCR_MIN_PRESCALE, pv, dc; 83 int ret; 84 85 /* 86 * Find pv, dc and prescale to suit duty_ns and period_ns. This is done 87 * according to formulas described below: 88 * 89 * period_ns = 10^9 * (PRESCALE + 1) * PV / PWM_CLK_RATE 90 * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE 91 * 92 * PV = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1)) 93 * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1)) 94 */ 95 clk_rate = clk_get_rate(pc->clk); 96 while (1) { 97 div = 1000000000; 98 div *= 1 + prescale; 99 val = clk_rate * period_ns; 100 pv = div64_u64(val, div); 101 val = clk_rate * duty_ns; 102 dc = div64_u64(val, div); 103 104 /* if duty_ns and period_ns are not achievable then return */ 105 if (pv < PWMPCR_MIN_PERIOD || dc < PWMDCR_MIN_DUTY) 106 return -EINVAL; 107 108 /* 109 * if pv and dc have crossed their upper limit, then increase 110 * prescale and recalculate pv and dc. 111 */ 112 if (pv > PWMPCR_MAX_PERIOD || dc > PWMDCR_MAX_DUTY) { 113 if (++prescale > PWMCR_MAX_PRESCALE) 114 return -EINVAL; 115 continue; 116 } 117 break; 118 } 119 120 /* 121 * NOTE: the clock to PWM has to be enabled first before writing to the 122 * registers. 123 */ 124 ret = clk_enable(pc->clk); 125 if (ret) 126 return ret; 127 128 spear_pwm_writel(pc, pwm->hwpwm, PWMCR, 129 prescale << PWMCR_PRESCALE_SHIFT); 130 spear_pwm_writel(pc, pwm->hwpwm, PWMDCR, dc); 131 spear_pwm_writel(pc, pwm->hwpwm, PWMPCR, pv); 132 clk_disable(pc->clk); 133 134 return 0; 135 } 136 137 static int spear_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) 138 { 139 struct spear_pwm_chip *pc = to_spear_pwm_chip(chip); 140 int rc = 0; 141 u32 val; 142 143 rc = clk_enable(pc->clk); 144 if (rc) 145 return rc; 146 147 val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR); 148 val |= PWMCR_PWM_ENABLE; 149 spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val); 150 151 return 0; 152 } 153 154 static void spear_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) 155 { 156 struct spear_pwm_chip *pc = to_spear_pwm_chip(chip); 157 u32 val; 158 159 val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR); 160 val &= ~PWMCR_PWM_ENABLE; 161 spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val); 162 163 clk_disable(pc->clk); 164 } 165 166 static const struct pwm_ops spear_pwm_ops = { 167 .config = spear_pwm_config, 168 .enable = spear_pwm_enable, 169 .disable = spear_pwm_disable, 170 .owner = THIS_MODULE, 171 }; 172 173 static int spear_pwm_probe(struct platform_device *pdev) 174 { 175 struct device_node *np = pdev->dev.of_node; 176 struct spear_pwm_chip *pc; 177 struct resource *r; 178 int ret; 179 u32 val; 180 181 pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); 182 if (!pc) { 183 dev_err(&pdev->dev, "failed to allocate memory\n"); 184 return -ENOMEM; 185 } 186 187 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 188 pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); 189 if (IS_ERR(pc->mmio_base)) 190 return PTR_ERR(pc->mmio_base); 191 192 pc->clk = devm_clk_get(&pdev->dev, NULL); 193 if (IS_ERR(pc->clk)) 194 return PTR_ERR(pc->clk); 195 196 platform_set_drvdata(pdev, pc); 197 198 pc->chip.dev = &pdev->dev; 199 pc->chip.ops = &spear_pwm_ops; 200 pc->chip.base = -1; 201 pc->chip.npwm = NUM_PWM; 202 203 ret = clk_prepare(pc->clk); 204 if (ret) 205 return ret; 206 207 if (of_device_is_compatible(np, "st,spear1340-pwm")) { 208 ret = clk_enable(pc->clk); 209 if (ret) { 210 clk_unprepare(pc->clk); 211 return ret; 212 } 213 /* 214 * Following enables PWM chip, channels would still be 215 * enabled individually through their control register 216 */ 217 val = readl_relaxed(pc->mmio_base + PWMMCR); 218 val |= PWMMCR_PWM_ENABLE; 219 writel_relaxed(val, pc->mmio_base + PWMMCR); 220 221 clk_disable(pc->clk); 222 } 223 224 ret = pwmchip_add(&pc->chip); 225 if (!ret) { 226 clk_unprepare(pc->clk); 227 dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); 228 } 229 230 return ret; 231 } 232 233 static int spear_pwm_remove(struct platform_device *pdev) 234 { 235 struct spear_pwm_chip *pc = platform_get_drvdata(pdev); 236 int i; 237 238 for (i = 0; i < NUM_PWM; i++) 239 pwm_disable(&pc->chip.pwms[i]); 240 241 /* clk was prepared in probe, hence unprepare it here */ 242 clk_unprepare(pc->clk); 243 return pwmchip_remove(&pc->chip); 244 } 245 246 static const struct of_device_id spear_pwm_of_match[] = { 247 { .compatible = "st,spear320-pwm" }, 248 { .compatible = "st,spear1340-pwm" }, 249 { } 250 }; 251 252 MODULE_DEVICE_TABLE(of, spear_pwm_of_match); 253 254 static struct platform_driver spear_pwm_driver = { 255 .driver = { 256 .name = "spear-pwm", 257 .owner = THIS_MODULE, 258 .of_match_table = spear_pwm_of_match, 259 }, 260 .probe = spear_pwm_probe, 261 .remove = spear_pwm_remove, 262 }; 263 264 module_platform_driver(spear_pwm_driver); 265 266 MODULE_LICENSE("GPL"); 267 MODULE_AUTHOR("Shiraz Hashim <shiraz.hashim@st.com>"); 268 MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>"); 269 MODULE_ALIAS("platform:spear-pwm"); 270