1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * R-Mobile TPU PWM driver 4 * 5 * Copyright (C) 2012 Renesas Solutions Corp. 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/err.h> 10 #include <linux/io.h> 11 #include <linux/init.h> 12 #include <linux/ioport.h> 13 #include <linux/module.h> 14 #include <linux/mutex.h> 15 #include <linux/of.h> 16 #include <linux/platform_device.h> 17 #include <linux/pm_runtime.h> 18 #include <linux/pwm.h> 19 #include <linux/slab.h> 20 #include <linux/spinlock.h> 21 22 #define TPU_CHANNEL_MAX 4 23 24 #define TPU_TSTR 0x00 /* Timer start register (shared) */ 25 26 #define TPU_TCRn 0x00 /* Timer control register */ 27 #define TPU_TCR_CCLR_NONE (0 << 5) 28 #define TPU_TCR_CCLR_TGRA (1 << 5) 29 #define TPU_TCR_CCLR_TGRB (2 << 5) 30 #define TPU_TCR_CCLR_TGRC (5 << 5) 31 #define TPU_TCR_CCLR_TGRD (6 << 5) 32 #define TPU_TCR_CKEG_RISING (0 << 3) 33 #define TPU_TCR_CKEG_FALLING (1 << 3) 34 #define TPU_TCR_CKEG_BOTH (2 << 3) 35 #define TPU_TMDRn 0x04 /* Timer mode register */ 36 #define TPU_TMDR_BFWT (1 << 6) 37 #define TPU_TMDR_BFB (1 << 5) 38 #define TPU_TMDR_BFA (1 << 4) 39 #define TPU_TMDR_MD_NORMAL (0 << 0) 40 #define TPU_TMDR_MD_PWM (2 << 0) 41 #define TPU_TIORn 0x08 /* Timer I/O control register */ 42 #define TPU_TIOR_IOA_0 (0 << 0) 43 #define TPU_TIOR_IOA_0_CLR (1 << 0) 44 #define TPU_TIOR_IOA_0_SET (2 << 0) 45 #define TPU_TIOR_IOA_0_TOGGLE (3 << 0) 46 #define TPU_TIOR_IOA_1 (4 << 0) 47 #define TPU_TIOR_IOA_1_CLR (5 << 0) 48 #define TPU_TIOR_IOA_1_SET (6 << 0) 49 #define TPU_TIOR_IOA_1_TOGGLE (7 << 0) 50 #define TPU_TIERn 0x0c /* Timer interrupt enable register */ 51 #define TPU_TSRn 0x10 /* Timer status register */ 52 #define TPU_TCNTn 0x14 /* Timer counter */ 53 #define TPU_TGRAn 0x18 /* Timer general register A */ 54 #define TPU_TGRBn 0x1c /* Timer general register B */ 55 #define TPU_TGRCn 0x20 /* Timer general register C */ 56 #define TPU_TGRDn 0x24 /* Timer general register D */ 57 58 #define TPU_CHANNEL_OFFSET 0x10 59 #define TPU_CHANNEL_SIZE 0x40 60 61 enum tpu_pin_state { 62 TPU_PIN_INACTIVE, /* Pin is driven inactive */ 63 TPU_PIN_PWM, /* Pin is driven by PWM */ 64 TPU_PIN_ACTIVE, /* Pin is driven active */ 65 }; 66 67 struct tpu_device; 68 69 struct tpu_pwm_device { 70 bool timer_on; /* Whether the timer is running */ 71 72 struct tpu_device *tpu; 73 unsigned int channel; /* Channel number in the TPU */ 74 75 enum pwm_polarity polarity; 76 unsigned int prescaler; 77 u16 period; 78 u16 duty; 79 }; 80 81 struct tpu_device { 82 struct platform_device *pdev; 83 struct pwm_chip chip; 84 spinlock_t lock; 85 86 void __iomem *base; 87 struct clk *clk; 88 }; 89 90 #define to_tpu_device(c) container_of(c, struct tpu_device, chip) 91 92 static void tpu_pwm_write(struct tpu_pwm_device *pwm, int reg_nr, u16 value) 93 { 94 void __iomem *base = pwm->tpu->base + TPU_CHANNEL_OFFSET 95 + pwm->channel * TPU_CHANNEL_SIZE; 96 97 iowrite16(value, base + reg_nr); 98 } 99 100 static void tpu_pwm_set_pin(struct tpu_pwm_device *pwm, 101 enum tpu_pin_state state) 102 { 103 static const char * const states[] = { "inactive", "PWM", "active" }; 104 105 dev_dbg(&pwm->tpu->pdev->dev, "%u: configuring pin as %s\n", 106 pwm->channel, states[state]); 107 108 switch (state) { 109 case TPU_PIN_INACTIVE: 110 tpu_pwm_write(pwm, TPU_TIORn, 111 pwm->polarity == PWM_POLARITY_INVERSED ? 112 TPU_TIOR_IOA_1 : TPU_TIOR_IOA_0); 113 break; 114 case TPU_PIN_PWM: 115 tpu_pwm_write(pwm, TPU_TIORn, 116 pwm->polarity == PWM_POLARITY_INVERSED ? 117 TPU_TIOR_IOA_0_SET : TPU_TIOR_IOA_1_CLR); 118 break; 119 case TPU_PIN_ACTIVE: 120 tpu_pwm_write(pwm, TPU_TIORn, 121 pwm->polarity == PWM_POLARITY_INVERSED ? 122 TPU_TIOR_IOA_0 : TPU_TIOR_IOA_1); 123 break; 124 } 125 } 126 127 static void tpu_pwm_start_stop(struct tpu_pwm_device *pwm, int start) 128 { 129 unsigned long flags; 130 u16 value; 131 132 spin_lock_irqsave(&pwm->tpu->lock, flags); 133 value = ioread16(pwm->tpu->base + TPU_TSTR); 134 135 if (start) 136 value |= 1 << pwm->channel; 137 else 138 value &= ~(1 << pwm->channel); 139 140 iowrite16(value, pwm->tpu->base + TPU_TSTR); 141 spin_unlock_irqrestore(&pwm->tpu->lock, flags); 142 } 143 144 static int tpu_pwm_timer_start(struct tpu_pwm_device *pwm) 145 { 146 int ret; 147 148 if (!pwm->timer_on) { 149 /* Wake up device and enable clock. */ 150 pm_runtime_get_sync(&pwm->tpu->pdev->dev); 151 ret = clk_prepare_enable(pwm->tpu->clk); 152 if (ret) { 153 dev_err(&pwm->tpu->pdev->dev, "cannot enable clock\n"); 154 return ret; 155 } 156 pwm->timer_on = true; 157 } 158 159 /* 160 * Make sure the channel is stopped, as we need to reconfigure it 161 * completely. First drive the pin to the inactive state to avoid 162 * glitches. 163 */ 164 tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE); 165 tpu_pwm_start_stop(pwm, false); 166 167 /* 168 * - Clear TCNT on TGRB match 169 * - Count on rising edge 170 * - Set prescaler 171 * - Output 0 until TGRA, output 1 until TGRB (active low polarity) 172 * - Output 1 until TGRA, output 0 until TGRB (active high polarity 173 * - PWM mode 174 */ 175 tpu_pwm_write(pwm, TPU_TCRn, TPU_TCR_CCLR_TGRB | TPU_TCR_CKEG_RISING | 176 pwm->prescaler); 177 tpu_pwm_write(pwm, TPU_TMDRn, TPU_TMDR_MD_PWM); 178 tpu_pwm_set_pin(pwm, TPU_PIN_PWM); 179 tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty); 180 tpu_pwm_write(pwm, TPU_TGRBn, pwm->period); 181 182 dev_dbg(&pwm->tpu->pdev->dev, "%u: TGRA 0x%04x TGRB 0x%04x\n", 183 pwm->channel, pwm->duty, pwm->period); 184 185 /* Start the channel. */ 186 tpu_pwm_start_stop(pwm, true); 187 188 return 0; 189 } 190 191 static void tpu_pwm_timer_stop(struct tpu_pwm_device *pwm) 192 { 193 if (!pwm->timer_on) 194 return; 195 196 /* Disable channel. */ 197 tpu_pwm_start_stop(pwm, false); 198 199 /* Stop clock and mark device as idle. */ 200 clk_disable_unprepare(pwm->tpu->clk); 201 pm_runtime_put(&pwm->tpu->pdev->dev); 202 203 pwm->timer_on = false; 204 } 205 206 /* ----------------------------------------------------------------------------- 207 * PWM API 208 */ 209 210 static int tpu_pwm_request(struct pwm_chip *chip, struct pwm_device *_pwm) 211 { 212 struct tpu_device *tpu = to_tpu_device(chip); 213 struct tpu_pwm_device *pwm; 214 215 if (_pwm->hwpwm >= TPU_CHANNEL_MAX) 216 return -EINVAL; 217 218 pwm = kzalloc(sizeof(*pwm), GFP_KERNEL); 219 if (pwm == NULL) 220 return -ENOMEM; 221 222 pwm->tpu = tpu; 223 pwm->channel = _pwm->hwpwm; 224 pwm->polarity = PWM_POLARITY_NORMAL; 225 pwm->prescaler = 0; 226 pwm->period = 0; 227 pwm->duty = 0; 228 229 pwm->timer_on = false; 230 231 pwm_set_chip_data(_pwm, pwm); 232 233 return 0; 234 } 235 236 static void tpu_pwm_free(struct pwm_chip *chip, struct pwm_device *_pwm) 237 { 238 struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); 239 240 tpu_pwm_timer_stop(pwm); 241 kfree(pwm); 242 } 243 244 static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *_pwm, 245 int duty_ns, int period_ns) 246 { 247 static const unsigned int prescalers[] = { 1, 4, 16, 64 }; 248 struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); 249 struct tpu_device *tpu = to_tpu_device(chip); 250 unsigned int prescaler; 251 bool duty_only = false; 252 u32 clk_rate; 253 u32 period; 254 u32 duty; 255 int ret; 256 257 /* 258 * Pick a prescaler to avoid overflowing the counter. 259 * TODO: Pick the highest acceptable prescaler. 260 */ 261 clk_rate = clk_get_rate(tpu->clk); 262 263 for (prescaler = 0; prescaler < ARRAY_SIZE(prescalers); ++prescaler) { 264 period = clk_rate / prescalers[prescaler] 265 / (NSEC_PER_SEC / period_ns); 266 if (period <= 0xffff) 267 break; 268 } 269 270 if (prescaler == ARRAY_SIZE(prescalers) || period == 0) { 271 dev_err(&tpu->pdev->dev, "clock rate mismatch\n"); 272 return -ENOTSUPP; 273 } 274 275 if (duty_ns) { 276 duty = clk_rate / prescalers[prescaler] 277 / (NSEC_PER_SEC / duty_ns); 278 if (duty > period) 279 return -EINVAL; 280 } else { 281 duty = 0; 282 } 283 284 dev_dbg(&tpu->pdev->dev, 285 "rate %u, prescaler %u, period %u, duty %u\n", 286 clk_rate, prescalers[prescaler], period, duty); 287 288 if (pwm->prescaler == prescaler && pwm->period == period) 289 duty_only = true; 290 291 pwm->prescaler = prescaler; 292 pwm->period = period; 293 pwm->duty = duty; 294 295 /* If the channel is disabled we're done. */ 296 if (!pwm_is_enabled(_pwm)) 297 return 0; 298 299 if (duty_only && pwm->timer_on) { 300 /* 301 * If only the duty cycle changed and the timer is already 302 * running, there's no need to reconfigure it completely, Just 303 * modify the duty cycle. 304 */ 305 tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty); 306 dev_dbg(&tpu->pdev->dev, "%u: TGRA 0x%04x\n", pwm->channel, 307 pwm->duty); 308 } else { 309 /* Otherwise perform a full reconfiguration. */ 310 ret = tpu_pwm_timer_start(pwm); 311 if (ret < 0) 312 return ret; 313 } 314 315 if (duty == 0 || duty == period) { 316 /* 317 * To avoid running the timer when not strictly required, handle 318 * 0% and 100% duty cycles as fixed levels and stop the timer. 319 */ 320 tpu_pwm_set_pin(pwm, duty ? TPU_PIN_ACTIVE : TPU_PIN_INACTIVE); 321 tpu_pwm_timer_stop(pwm); 322 } 323 324 return 0; 325 } 326 327 static int tpu_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *_pwm, 328 enum pwm_polarity polarity) 329 { 330 struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); 331 332 pwm->polarity = polarity; 333 334 return 0; 335 } 336 337 static int tpu_pwm_enable(struct pwm_chip *chip, struct pwm_device *_pwm) 338 { 339 struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); 340 int ret; 341 342 ret = tpu_pwm_timer_start(pwm); 343 if (ret < 0) 344 return ret; 345 346 /* 347 * To avoid running the timer when not strictly required, handle 0% and 348 * 100% duty cycles as fixed levels and stop the timer. 349 */ 350 if (pwm->duty == 0 || pwm->duty == pwm->period) { 351 tpu_pwm_set_pin(pwm, pwm->duty ? 352 TPU_PIN_ACTIVE : TPU_PIN_INACTIVE); 353 tpu_pwm_timer_stop(pwm); 354 } 355 356 return 0; 357 } 358 359 static void tpu_pwm_disable(struct pwm_chip *chip, struct pwm_device *_pwm) 360 { 361 struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); 362 363 /* The timer must be running to modify the pin output configuration. */ 364 tpu_pwm_timer_start(pwm); 365 tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE); 366 tpu_pwm_timer_stop(pwm); 367 } 368 369 static const struct pwm_ops tpu_pwm_ops = { 370 .request = tpu_pwm_request, 371 .free = tpu_pwm_free, 372 .config = tpu_pwm_config, 373 .set_polarity = tpu_pwm_set_polarity, 374 .enable = tpu_pwm_enable, 375 .disable = tpu_pwm_disable, 376 .owner = THIS_MODULE, 377 }; 378 379 /* ----------------------------------------------------------------------------- 380 * Probe and remove 381 */ 382 383 static int tpu_probe(struct platform_device *pdev) 384 { 385 struct tpu_device *tpu; 386 int ret; 387 388 tpu = devm_kzalloc(&pdev->dev, sizeof(*tpu), GFP_KERNEL); 389 if (tpu == NULL) 390 return -ENOMEM; 391 392 spin_lock_init(&tpu->lock); 393 tpu->pdev = pdev; 394 395 /* Map memory, get clock and pin control. */ 396 tpu->base = devm_platform_ioremap_resource(pdev, 0); 397 if (IS_ERR(tpu->base)) 398 return PTR_ERR(tpu->base); 399 400 tpu->clk = devm_clk_get(&pdev->dev, NULL); 401 if (IS_ERR(tpu->clk)) { 402 dev_err(&pdev->dev, "cannot get clock\n"); 403 return PTR_ERR(tpu->clk); 404 } 405 406 /* Initialize and register the device. */ 407 platform_set_drvdata(pdev, tpu); 408 409 tpu->chip.dev = &pdev->dev; 410 tpu->chip.ops = &tpu_pwm_ops; 411 tpu->chip.npwm = TPU_CHANNEL_MAX; 412 413 pm_runtime_enable(&pdev->dev); 414 415 ret = pwmchip_add(&tpu->chip); 416 if (ret < 0) { 417 dev_err(&pdev->dev, "failed to register PWM chip\n"); 418 pm_runtime_disable(&pdev->dev); 419 return ret; 420 } 421 422 return 0; 423 } 424 425 static int tpu_remove(struct platform_device *pdev) 426 { 427 struct tpu_device *tpu = platform_get_drvdata(pdev); 428 int ret; 429 430 ret = pwmchip_remove(&tpu->chip); 431 432 pm_runtime_disable(&pdev->dev); 433 434 return ret; 435 } 436 437 #ifdef CONFIG_OF 438 static const struct of_device_id tpu_of_table[] = { 439 { .compatible = "renesas,tpu-r8a73a4", }, 440 { .compatible = "renesas,tpu-r8a7740", }, 441 { .compatible = "renesas,tpu-r8a7790", }, 442 { .compatible = "renesas,tpu", }, 443 { }, 444 }; 445 446 MODULE_DEVICE_TABLE(of, tpu_of_table); 447 #endif 448 449 static struct platform_driver tpu_driver = { 450 .probe = tpu_probe, 451 .remove = tpu_remove, 452 .driver = { 453 .name = "renesas-tpu-pwm", 454 .of_match_table = of_match_ptr(tpu_of_table), 455 } 456 }; 457 458 module_platform_driver(tpu_driver); 459 460 MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); 461 MODULE_DESCRIPTION("Renesas TPU PWM Driver"); 462 MODULE_LICENSE("GPL v2"); 463 MODULE_ALIAS("platform:renesas-tpu-pwm"); 464