xref: /openbmc/linux/drivers/pwm/pwm-pxa.c (revision 0cb4228f)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * drivers/pwm/pwm-pxa.c
4  *
5  * simple driver for PWM (Pulse Width Modulator) controller
6  *
7  * 2008-02-13	initial version
8  *		eric miao <eric.miao@marvell.com>
9  *
10  * Links to reference manuals for some of the supported PWM chips can be found
11  * in Documentation/arm/marvell.rst.
12  *
13  * Limitations:
14  * - When PWM is stopped, the current PWM period stops abruptly at the next
15  *   input clock (PWMCR_SD is set) and the output is driven to inactive.
16  */
17 
18 #include <linux/module.h>
19 #include <linux/kernel.h>
20 #include <linux/platform_device.h>
21 #include <linux/slab.h>
22 #include <linux/err.h>
23 #include <linux/clk.h>
24 #include <linux/io.h>
25 #include <linux/pwm.h>
26 #include <linux/of_device.h>
27 
28 #include <asm/div64.h>
29 
30 #define HAS_SECONDARY_PWM	0x10
31 
32 static const struct platform_device_id pwm_id_table[] = {
33 	/*   PWM    has_secondary_pwm? */
34 	{ "pxa25x-pwm", 0 },
35 	{ "pxa27x-pwm", HAS_SECONDARY_PWM },
36 	{ "pxa168-pwm", 0 },
37 	{ "pxa910-pwm", 0 },
38 	{ },
39 };
40 MODULE_DEVICE_TABLE(platform, pwm_id_table);
41 
42 /* PWM registers and bits definitions */
43 #define PWMCR		(0x00)
44 #define PWMDCR		(0x04)
45 #define PWMPCR		(0x08)
46 
47 #define PWMCR_SD	(1 << 6)
48 #define PWMDCR_FD	(1 << 10)
49 
50 struct pxa_pwm_chip {
51 	struct pwm_chip	chip;
52 	struct device	*dev;
53 
54 	struct clk	*clk;
55 	void __iomem	*mmio_base;
56 };
57 
58 static inline struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip)
59 {
60 	return container_of(chip, struct pxa_pwm_chip, chip);
61 }
62 
63 /*
64  * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
65  * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
66  */
67 static int pxa_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
68 			  u64 duty_ns, u64 period_ns)
69 {
70 	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
71 	unsigned long long c;
72 	unsigned long period_cycles, prescale, pv, dc;
73 	unsigned long offset;
74 
75 	offset = pwm->hwpwm ? 0x10 : 0;
76 
77 	c = clk_get_rate(pc->clk);
78 	c = c * period_ns;
79 	do_div(c, 1000000000);
80 	period_cycles = c;
81 
82 	if (period_cycles < 1)
83 		period_cycles = 1;
84 	prescale = (period_cycles - 1) / 1024;
85 	pv = period_cycles / (prescale + 1) - 1;
86 
87 	if (prescale > 63)
88 		return -EINVAL;
89 
90 	if (duty_ns == period_ns)
91 		dc = PWMDCR_FD;
92 	else
93 		dc = mul_u64_u64_div_u64(pv + 1, duty_ns, period_ns);
94 
95 	writel(prescale | PWMCR_SD, pc->mmio_base + offset + PWMCR);
96 	writel(dc, pc->mmio_base + offset + PWMDCR);
97 	writel(pv, pc->mmio_base + offset + PWMPCR);
98 
99 	return 0;
100 }
101 
102 static int pxa_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
103 			 const struct pwm_state *state)
104 {
105 	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
106 	u64 duty_cycle;
107 	int err;
108 
109 	if (state->polarity != PWM_POLARITY_NORMAL)
110 		return -EINVAL;
111 
112 	err = clk_prepare_enable(pc->clk);
113 	if (err)
114 		return err;
115 
116 	duty_cycle = state->enabled ? state->duty_cycle : 0;
117 
118 	err = pxa_pwm_config(chip, pwm, duty_cycle, state->period);
119 	if (err) {
120 		clk_disable_unprepare(pc->clk);
121 		return err;
122 	}
123 
124 	if (state->enabled && !pwm->state.enabled)
125 		return 0;
126 
127 	clk_disable_unprepare(pc->clk);
128 
129 	if (!state->enabled && pwm->state.enabled)
130 		clk_disable_unprepare(pc->clk);
131 
132 	return 0;
133 }
134 
135 static const struct pwm_ops pxa_pwm_ops = {
136 	.apply = pxa_pwm_apply,
137 	.owner = THIS_MODULE,
138 };
139 
140 #ifdef CONFIG_OF
141 /*
142  * Device tree users must create one device instance for each PWM channel.
143  * Hence we dispense with the HAS_SECONDARY_PWM and "tell" the original driver
144  * code that this is a single channel pxa25x-pwm.  Currently all devices are
145  * supported identically.
146  */
147 static const struct of_device_id pwm_of_match[] = {
148 	{ .compatible = "marvell,pxa250-pwm", .data = &pwm_id_table[0]},
149 	{ .compatible = "marvell,pxa270-pwm", .data = &pwm_id_table[0]},
150 	{ .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[0]},
151 	{ .compatible = "marvell,pxa910-pwm", .data = &pwm_id_table[0]},
152 	{ }
153 };
154 MODULE_DEVICE_TABLE(of, pwm_of_match);
155 #else
156 #define pwm_of_match NULL
157 #endif
158 
159 static const struct platform_device_id *pxa_pwm_get_id_dt(struct device *dev)
160 {
161 	const struct of_device_id *id = of_match_device(pwm_of_match, dev);
162 
163 	return id ? id->data : NULL;
164 }
165 
166 static int pwm_probe(struct platform_device *pdev)
167 {
168 	const struct platform_device_id *id = platform_get_device_id(pdev);
169 	struct pxa_pwm_chip *pc;
170 	int ret = 0;
171 
172 	if (IS_ENABLED(CONFIG_OF) && id == NULL)
173 		id = pxa_pwm_get_id_dt(&pdev->dev);
174 
175 	if (id == NULL)
176 		return -EINVAL;
177 
178 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
179 	if (pc == NULL)
180 		return -ENOMEM;
181 
182 	pc->clk = devm_clk_get(&pdev->dev, NULL);
183 	if (IS_ERR(pc->clk))
184 		return PTR_ERR(pc->clk);
185 
186 	pc->chip.dev = &pdev->dev;
187 	pc->chip.ops = &pxa_pwm_ops;
188 	pc->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
189 
190 	if (IS_ENABLED(CONFIG_OF)) {
191 		pc->chip.of_xlate = of_pwm_single_xlate;
192 		pc->chip.of_pwm_n_cells = 1;
193 	}
194 
195 	pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
196 	if (IS_ERR(pc->mmio_base))
197 		return PTR_ERR(pc->mmio_base);
198 
199 	ret = devm_pwmchip_add(&pdev->dev, &pc->chip);
200 	if (ret < 0) {
201 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
202 		return ret;
203 	}
204 
205 	return 0;
206 }
207 
208 static struct platform_driver pwm_driver = {
209 	.driver		= {
210 		.name	= "pxa25x-pwm",
211 		.of_match_table = pwm_of_match,
212 	},
213 	.probe		= pwm_probe,
214 	.id_table	= pwm_id_table,
215 };
216 
217 module_platform_driver(pwm_driver);
218 
219 MODULE_LICENSE("GPL v2");
220