1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> 4 * JZ4740 platform PWM support 5 * 6 * Limitations: 7 * - The .apply callback doesn't complete the currently running period before 8 * reconfiguring the hardware. 9 */ 10 11 #include <linux/clk.h> 12 #include <linux/err.h> 13 #include <linux/gpio.h> 14 #include <linux/kernel.h> 15 #include <linux/mfd/ingenic-tcu.h> 16 #include <linux/mfd/syscon.h> 17 #include <linux/module.h> 18 #include <linux/of_device.h> 19 #include <linux/platform_device.h> 20 #include <linux/pwm.h> 21 #include <linux/regmap.h> 22 23 struct soc_info { 24 unsigned int num_pwms; 25 }; 26 27 struct jz4740_pwm_chip { 28 struct pwm_chip chip; 29 struct regmap *map; 30 }; 31 32 static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip) 33 { 34 return container_of(chip, struct jz4740_pwm_chip, chip); 35 } 36 37 static bool jz4740_pwm_can_use_chn(struct jz4740_pwm_chip *jz, 38 unsigned int channel) 39 { 40 /* Enable all TCU channels for PWM use by default except channels 0/1 */ 41 u32 pwm_channels_mask = GENMASK(jz->chip.npwm - 1, 2); 42 43 device_property_read_u32(jz->chip.dev->parent, 44 "ingenic,pwm-channels-mask", 45 &pwm_channels_mask); 46 47 return !!(pwm_channels_mask & BIT(channel)); 48 } 49 50 static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) 51 { 52 struct jz4740_pwm_chip *jz = to_jz4740(chip); 53 struct clk *clk; 54 char name[16]; 55 int err; 56 57 if (!jz4740_pwm_can_use_chn(jz, pwm->hwpwm)) 58 return -EBUSY; 59 60 snprintf(name, sizeof(name), "timer%u", pwm->hwpwm); 61 62 clk = clk_get(chip->dev, name); 63 if (IS_ERR(clk)) 64 return dev_err_probe(chip->dev, PTR_ERR(clk), 65 "Failed to get clock\n"); 66 67 err = clk_prepare_enable(clk); 68 if (err < 0) { 69 clk_put(clk); 70 return err; 71 } 72 73 pwm_set_chip_data(pwm, clk); 74 75 return 0; 76 } 77 78 static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) 79 { 80 struct clk *clk = pwm_get_chip_data(pwm); 81 82 clk_disable_unprepare(clk); 83 clk_put(clk); 84 } 85 86 static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) 87 { 88 struct jz4740_pwm_chip *jz = to_jz4740(chip); 89 90 /* Enable PWM output */ 91 regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm), 92 TCU_TCSR_PWM_EN, TCU_TCSR_PWM_EN); 93 94 /* Start counter */ 95 regmap_write(jz->map, TCU_REG_TESR, BIT(pwm->hwpwm)); 96 97 return 0; 98 } 99 100 static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) 101 { 102 struct jz4740_pwm_chip *jz = to_jz4740(chip); 103 104 /* 105 * Set duty > period. This trick allows the TCU channels in TCU2 mode to 106 * properly return to their init level. 107 */ 108 regmap_write(jz->map, TCU_REG_TDHRc(pwm->hwpwm), 0xffff); 109 regmap_write(jz->map, TCU_REG_TDFRc(pwm->hwpwm), 0x0); 110 111 /* 112 * Disable PWM output. 113 * In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the 114 * counter is stopped, while in TCU1 mode the order does not matter. 115 */ 116 regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm), 117 TCU_TCSR_PWM_EN, 0); 118 119 /* Stop counter */ 120 regmap_write(jz->map, TCU_REG_TECR, BIT(pwm->hwpwm)); 121 } 122 123 static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, 124 const struct pwm_state *state) 125 { 126 struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip); 127 unsigned long long tmp = 0xffffull * NSEC_PER_SEC; 128 struct clk *clk = pwm_get_chip_data(pwm); 129 unsigned long period, duty; 130 long rate; 131 int err; 132 133 /* 134 * Limit the clock to a maximum rate that still gives us a period value 135 * which fits in 16 bits. 136 */ 137 do_div(tmp, state->period); 138 139 /* 140 * /!\ IMPORTANT NOTE: 141 * ------------------- 142 * This code relies on the fact that clk_round_rate() will always round 143 * down, which is not a valid assumption given by the clk API, but only 144 * happens to be true with the clk drivers used for Ingenic SoCs. 145 * 146 * Right now, there is no alternative as the clk API does not have a 147 * round-down function (and won't have one for a while), but if it ever 148 * comes to light, a round-down function should be used instead. 149 */ 150 rate = clk_round_rate(clk, tmp); 151 if (rate < 0) { 152 dev_err(chip->dev, "Unable to round rate: %ld", rate); 153 return rate; 154 } 155 156 /* Calculate period value */ 157 tmp = (unsigned long long)rate * state->period; 158 do_div(tmp, NSEC_PER_SEC); 159 period = tmp; 160 161 /* Calculate duty value */ 162 tmp = (unsigned long long)rate * state->duty_cycle; 163 do_div(tmp, NSEC_PER_SEC); 164 duty = tmp; 165 166 if (duty >= period) 167 duty = period - 1; 168 169 jz4740_pwm_disable(chip, pwm); 170 171 err = clk_set_rate(clk, rate); 172 if (err) { 173 dev_err(chip->dev, "Unable to set rate: %d", err); 174 return err; 175 } 176 177 /* Reset counter to 0 */ 178 regmap_write(jz4740->map, TCU_REG_TCNTc(pwm->hwpwm), 0); 179 180 /* Set duty */ 181 regmap_write(jz4740->map, TCU_REG_TDHRc(pwm->hwpwm), duty); 182 183 /* Set period */ 184 regmap_write(jz4740->map, TCU_REG_TDFRc(pwm->hwpwm), period); 185 186 /* Set abrupt shutdown */ 187 regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm), 188 TCU_TCSR_PWM_SD, TCU_TCSR_PWM_SD); 189 190 /* 191 * Set polarity. 192 * 193 * The PWM starts in inactive state until the internal timer reaches the 194 * duty value, then becomes active until the timer reaches the period 195 * value. In theory, we should then use (period - duty) as the real duty 196 * value, as a high duty value would otherwise result in the PWM pin 197 * being inactive most of the time. 198 * 199 * Here, we don't do that, and instead invert the polarity of the PWM 200 * when it is active. This trick makes the PWM start with its active 201 * state instead of its inactive state. 202 */ 203 if ((state->polarity == PWM_POLARITY_NORMAL) ^ state->enabled) 204 regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm), 205 TCU_TCSR_PWM_INITL_HIGH, 0); 206 else 207 regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm), 208 TCU_TCSR_PWM_INITL_HIGH, 209 TCU_TCSR_PWM_INITL_HIGH); 210 211 if (state->enabled) 212 jz4740_pwm_enable(chip, pwm); 213 214 return 0; 215 } 216 217 static const struct pwm_ops jz4740_pwm_ops = { 218 .request = jz4740_pwm_request, 219 .free = jz4740_pwm_free, 220 .apply = jz4740_pwm_apply, 221 .owner = THIS_MODULE, 222 }; 223 224 static int jz4740_pwm_probe(struct platform_device *pdev) 225 { 226 struct device *dev = &pdev->dev; 227 struct jz4740_pwm_chip *jz4740; 228 const struct soc_info *info; 229 230 info = device_get_match_data(dev); 231 if (!info) 232 return -EINVAL; 233 234 jz4740 = devm_kzalloc(dev, sizeof(*jz4740), GFP_KERNEL); 235 if (!jz4740) 236 return -ENOMEM; 237 238 jz4740->map = device_node_to_regmap(dev->parent->of_node); 239 if (IS_ERR(jz4740->map)) { 240 dev_err(dev, "regmap not found: %ld\n", PTR_ERR(jz4740->map)); 241 return PTR_ERR(jz4740->map); 242 } 243 244 jz4740->chip.dev = dev; 245 jz4740->chip.ops = &jz4740_pwm_ops; 246 jz4740->chip.npwm = info->num_pwms; 247 jz4740->chip.of_xlate = of_pwm_xlate_with_flags; 248 jz4740->chip.of_pwm_n_cells = 3; 249 250 platform_set_drvdata(pdev, jz4740); 251 252 return pwmchip_add(&jz4740->chip); 253 } 254 255 static int jz4740_pwm_remove(struct platform_device *pdev) 256 { 257 struct jz4740_pwm_chip *jz4740 = platform_get_drvdata(pdev); 258 259 return pwmchip_remove(&jz4740->chip); 260 } 261 262 static const struct soc_info __maybe_unused jz4740_soc_info = { 263 .num_pwms = 8, 264 }; 265 266 static const struct soc_info __maybe_unused jz4725b_soc_info = { 267 .num_pwms = 6, 268 }; 269 270 #ifdef CONFIG_OF 271 static const struct of_device_id jz4740_pwm_dt_ids[] = { 272 { .compatible = "ingenic,jz4740-pwm", .data = &jz4740_soc_info }, 273 { .compatible = "ingenic,jz4725b-pwm", .data = &jz4725b_soc_info }, 274 {}, 275 }; 276 MODULE_DEVICE_TABLE(of, jz4740_pwm_dt_ids); 277 #endif 278 279 static struct platform_driver jz4740_pwm_driver = { 280 .driver = { 281 .name = "jz4740-pwm", 282 .of_match_table = of_match_ptr(jz4740_pwm_dt_ids), 283 }, 284 .probe = jz4740_pwm_probe, 285 .remove = jz4740_pwm_remove, 286 }; 287 module_platform_driver(jz4740_pwm_driver); 288 289 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); 290 MODULE_DESCRIPTION("Ingenic JZ4740 PWM driver"); 291 MODULE_ALIAS("platform:jz4740-pwm"); 292 MODULE_LICENSE("GPL"); 293