1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Broadcom BCM7038 PWM driver 4 * Author: Florian Fainelli 5 * 6 * Copyright (C) 2015 Broadcom Corporation 7 */ 8 9 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 10 11 #include <linux/clk.h> 12 #include <linux/export.h> 13 #include <linux/init.h> 14 #include <linux/io.h> 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/of.h> 18 #include <linux/platform_device.h> 19 #include <linux/pwm.h> 20 #include <linux/spinlock.h> 21 22 #define PWM_CTRL 0x00 23 #define CTRL_START BIT(0) 24 #define CTRL_OEB BIT(1) 25 #define CTRL_FORCE_HIGH BIT(2) 26 #define CTRL_OPENDRAIN BIT(3) 27 #define CTRL_CHAN_OFFS 4 28 29 #define PWM_CTRL2 0x04 30 #define CTRL2_OUT_SELECT BIT(0) 31 32 #define PWM_CH_SIZE 0x8 33 34 #define PWM_CWORD_MSB(ch) (0x08 + ((ch) * PWM_CH_SIZE)) 35 #define PWM_CWORD_LSB(ch) (0x0c + ((ch) * PWM_CH_SIZE)) 36 37 /* Number of bits for the CWORD value */ 38 #define CWORD_BIT_SIZE 16 39 40 /* 41 * Maximum control word value allowed when variable-frequency PWM is used as a 42 * clock for the constant-frequency PMW. 43 */ 44 #define CONST_VAR_F_MAX 32768 45 #define CONST_VAR_F_MIN 1 46 47 #define PWM_ON(ch) (0x18 + ((ch) * PWM_CH_SIZE)) 48 #define PWM_ON_MIN 1 49 #define PWM_PERIOD(ch) (0x1c + ((ch) * PWM_CH_SIZE)) 50 #define PWM_PERIOD_MIN 0 51 52 #define PWM_ON_PERIOD_MAX 0xff 53 54 struct brcmstb_pwm { 55 void __iomem *base; 56 spinlock_t lock; 57 struct clk *clk; 58 struct pwm_chip chip; 59 }; 60 61 static inline u32 brcmstb_pwm_readl(struct brcmstb_pwm *p, 62 unsigned int offset) 63 { 64 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) 65 return __raw_readl(p->base + offset); 66 else 67 return readl_relaxed(p->base + offset); 68 } 69 70 static inline void brcmstb_pwm_writel(struct brcmstb_pwm *p, u32 value, 71 unsigned int offset) 72 { 73 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) 74 __raw_writel(value, p->base + offset); 75 else 76 writel_relaxed(value, p->base + offset); 77 } 78 79 static inline struct brcmstb_pwm *to_brcmstb_pwm(struct pwm_chip *chip) 80 { 81 return container_of(chip, struct brcmstb_pwm, chip); 82 } 83 84 /* 85 * Fv is derived from the variable frequency output. The variable frequency 86 * output is configured using this formula: 87 * 88 * W = cword, if cword < 2 ^ 15 else 16-bit 2's complement of cword 89 * 90 * Fv = W x 2 ^ -16 x 27Mhz (reference clock) 91 * 92 * The period is: (period + 1) / Fv and "on" time is on / (period + 1) 93 * 94 * The PWM core framework specifies that the "duty_ns" parameter is in fact the 95 * "on" time, so this translates directly into our HW programming here. 96 */ 97 static int brcmstb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, 98 int duty_ns, int period_ns) 99 { 100 struct brcmstb_pwm *p = to_brcmstb_pwm(chip); 101 unsigned long pc, dc, cword = CONST_VAR_F_MAX; 102 unsigned int channel = pwm->hwpwm; 103 u32 value; 104 105 /* 106 * If asking for a duty_ns equal to period_ns, we need to substract 107 * the period value by 1 to make it shorter than the "on" time and 108 * produce a flat 100% duty cycle signal, and max out the "on" time 109 */ 110 if (duty_ns == period_ns) { 111 dc = PWM_ON_PERIOD_MAX; 112 pc = PWM_ON_PERIOD_MAX - 1; 113 goto done; 114 } 115 116 while (1) { 117 u64 rate, tmp; 118 119 /* 120 * Calculate the base rate from base frequency and current 121 * cword 122 */ 123 rate = (u64)clk_get_rate(p->clk) * (u64)cword; 124 do_div(rate, 1 << CWORD_BIT_SIZE); 125 126 tmp = period_ns * rate; 127 do_div(tmp, NSEC_PER_SEC); 128 pc = tmp; 129 130 tmp = (duty_ns + 1) * rate; 131 do_div(tmp, NSEC_PER_SEC); 132 dc = tmp; 133 134 /* 135 * We can be called with separate duty and period updates, 136 * so do not reject dc == 0 right away 137 */ 138 if (pc == PWM_PERIOD_MIN || (dc < PWM_ON_MIN && duty_ns)) 139 return -EINVAL; 140 141 /* We converged on a calculation */ 142 if (pc <= PWM_ON_PERIOD_MAX && dc <= PWM_ON_PERIOD_MAX) 143 break; 144 145 /* 146 * The cword needs to be a power of 2 for the variable 147 * frequency generator to output a 50% duty cycle variable 148 * frequency which is used as input clock to the fixed 149 * frequency generator. 150 */ 151 cword >>= 1; 152 153 /* 154 * Desired periods are too large, we do not have a divider 155 * for them 156 */ 157 if (cword < CONST_VAR_F_MIN) 158 return -EINVAL; 159 } 160 161 done: 162 /* 163 * Configure the defined "cword" value to have the variable frequency 164 * generator output a base frequency for the constant frequency 165 * generator to derive from. 166 */ 167 spin_lock(&p->lock); 168 brcmstb_pwm_writel(p, cword >> 8, PWM_CWORD_MSB(channel)); 169 brcmstb_pwm_writel(p, cword & 0xff, PWM_CWORD_LSB(channel)); 170 171 /* Select constant frequency signal output */ 172 value = brcmstb_pwm_readl(p, PWM_CTRL2); 173 value |= CTRL2_OUT_SELECT << (channel * CTRL_CHAN_OFFS); 174 brcmstb_pwm_writel(p, value, PWM_CTRL2); 175 176 /* Configure on and period value */ 177 brcmstb_pwm_writel(p, pc, PWM_PERIOD(channel)); 178 brcmstb_pwm_writel(p, dc, PWM_ON(channel)); 179 spin_unlock(&p->lock); 180 181 return 0; 182 } 183 184 static inline void brcmstb_pwm_enable_set(struct brcmstb_pwm *p, 185 unsigned int channel, bool enable) 186 { 187 unsigned int shift = channel * CTRL_CHAN_OFFS; 188 u32 value; 189 190 spin_lock(&p->lock); 191 value = brcmstb_pwm_readl(p, PWM_CTRL); 192 193 if (enable) { 194 value &= ~(CTRL_OEB << shift); 195 value |= (CTRL_START | CTRL_OPENDRAIN) << shift; 196 } else { 197 value &= ~((CTRL_START | CTRL_OPENDRAIN) << shift); 198 value |= CTRL_OEB << shift; 199 } 200 201 brcmstb_pwm_writel(p, value, PWM_CTRL); 202 spin_unlock(&p->lock); 203 } 204 205 static int brcmstb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) 206 { 207 struct brcmstb_pwm *p = to_brcmstb_pwm(chip); 208 209 brcmstb_pwm_enable_set(p, pwm->hwpwm, true); 210 211 return 0; 212 } 213 214 static void brcmstb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) 215 { 216 struct brcmstb_pwm *p = to_brcmstb_pwm(chip); 217 218 brcmstb_pwm_enable_set(p, pwm->hwpwm, false); 219 } 220 221 static const struct pwm_ops brcmstb_pwm_ops = { 222 .config = brcmstb_pwm_config, 223 .enable = brcmstb_pwm_enable, 224 .disable = brcmstb_pwm_disable, 225 .owner = THIS_MODULE, 226 }; 227 228 static const struct of_device_id brcmstb_pwm_of_match[] = { 229 { .compatible = "brcm,bcm7038-pwm", }, 230 { /* sentinel */ } 231 }; 232 MODULE_DEVICE_TABLE(of, brcmstb_pwm_of_match); 233 234 static int brcmstb_pwm_probe(struct platform_device *pdev) 235 { 236 struct brcmstb_pwm *p; 237 int ret; 238 239 p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); 240 if (!p) 241 return -ENOMEM; 242 243 spin_lock_init(&p->lock); 244 245 p->clk = devm_clk_get(&pdev->dev, NULL); 246 if (IS_ERR(p->clk)) { 247 dev_err(&pdev->dev, "failed to obtain clock\n"); 248 return PTR_ERR(p->clk); 249 } 250 251 ret = clk_prepare_enable(p->clk); 252 if (ret < 0) { 253 dev_err(&pdev->dev, "failed to enable clock: %d\n", ret); 254 return ret; 255 } 256 257 platform_set_drvdata(pdev, p); 258 259 p->chip.dev = &pdev->dev; 260 p->chip.ops = &brcmstb_pwm_ops; 261 p->chip.npwm = 2; 262 263 p->base = devm_platform_ioremap_resource(pdev, 0); 264 if (IS_ERR(p->base)) { 265 ret = PTR_ERR(p->base); 266 goto out_clk; 267 } 268 269 ret = pwmchip_add(&p->chip); 270 if (ret) { 271 dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); 272 goto out_clk; 273 } 274 275 return 0; 276 277 out_clk: 278 clk_disable_unprepare(p->clk); 279 return ret; 280 } 281 282 static int brcmstb_pwm_remove(struct platform_device *pdev) 283 { 284 struct brcmstb_pwm *p = platform_get_drvdata(pdev); 285 int ret; 286 287 ret = pwmchip_remove(&p->chip); 288 clk_disable_unprepare(p->clk); 289 290 return ret; 291 } 292 293 #ifdef CONFIG_PM_SLEEP 294 static int brcmstb_pwm_suspend(struct device *dev) 295 { 296 struct brcmstb_pwm *p = dev_get_drvdata(dev); 297 298 clk_disable(p->clk); 299 300 return 0; 301 } 302 303 static int brcmstb_pwm_resume(struct device *dev) 304 { 305 struct brcmstb_pwm *p = dev_get_drvdata(dev); 306 307 clk_enable(p->clk); 308 309 return 0; 310 } 311 #endif 312 313 static SIMPLE_DEV_PM_OPS(brcmstb_pwm_pm_ops, brcmstb_pwm_suspend, 314 brcmstb_pwm_resume); 315 316 static struct platform_driver brcmstb_pwm_driver = { 317 .probe = brcmstb_pwm_probe, 318 .remove = brcmstb_pwm_remove, 319 .driver = { 320 .name = "pwm-brcmstb", 321 .of_match_table = brcmstb_pwm_of_match, 322 .pm = &brcmstb_pwm_pm_ops, 323 }, 324 }; 325 module_platform_driver(brcmstb_pwm_driver); 326 327 MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>"); 328 MODULE_DESCRIPTION("Broadcom STB PWM driver"); 329 MODULE_ALIAS("platform:pwm-brcmstb"); 330 MODULE_LICENSE("GPL"); 331