1 // SPDX-License-Identifier: GPL-2.0-only 2 // Copyright (C) 2016 Broadcom 3 4 #include <linux/clk.h> 5 #include <linux/delay.h> 6 #include <linux/err.h> 7 #include <linux/io.h> 8 #include <linux/math64.h> 9 #include <linux/module.h> 10 #include <linux/of.h> 11 #include <linux/platform_device.h> 12 #include <linux/pwm.h> 13 14 #define IPROC_PWM_CTRL_OFFSET 0x00 15 #define IPROC_PWM_CTRL_TYPE_SHIFT(ch) (15 + (ch)) 16 #define IPROC_PWM_CTRL_POLARITY_SHIFT(ch) (8 + (ch)) 17 #define IPROC_PWM_CTRL_EN_SHIFT(ch) (ch) 18 19 #define IPROC_PWM_PERIOD_OFFSET(ch) (0x04 + ((ch) << 3)) 20 #define IPROC_PWM_PERIOD_MIN 0x02 21 #define IPROC_PWM_PERIOD_MAX 0xffff 22 23 #define IPROC_PWM_DUTY_CYCLE_OFFSET(ch) (0x08 + ((ch) << 3)) 24 #define IPROC_PWM_DUTY_CYCLE_MIN 0x00 25 #define IPROC_PWM_DUTY_CYCLE_MAX 0xffff 26 27 #define IPROC_PWM_PRESCALE_OFFSET 0x24 28 #define IPROC_PWM_PRESCALE_BITS 0x06 29 #define IPROC_PWM_PRESCALE_SHIFT(ch) ((3 - (ch)) * \ 30 IPROC_PWM_PRESCALE_BITS) 31 #define IPROC_PWM_PRESCALE_MASK(ch) (IPROC_PWM_PRESCALE_MAX << \ 32 IPROC_PWM_PRESCALE_SHIFT(ch)) 33 #define IPROC_PWM_PRESCALE_MIN 0x00 34 #define IPROC_PWM_PRESCALE_MAX 0x3f 35 36 struct iproc_pwmc { 37 struct pwm_chip chip; 38 void __iomem *base; 39 struct clk *clk; 40 }; 41 42 static inline struct iproc_pwmc *to_iproc_pwmc(struct pwm_chip *chip) 43 { 44 return container_of(chip, struct iproc_pwmc, chip); 45 } 46 47 static void iproc_pwmc_enable(struct iproc_pwmc *ip, unsigned int channel) 48 { 49 u32 value; 50 51 value = readl(ip->base + IPROC_PWM_CTRL_OFFSET); 52 value |= 1 << IPROC_PWM_CTRL_EN_SHIFT(channel); 53 writel(value, ip->base + IPROC_PWM_CTRL_OFFSET); 54 55 /* must be a 400 ns delay between clearing and setting enable bit */ 56 ndelay(400); 57 } 58 59 static void iproc_pwmc_disable(struct iproc_pwmc *ip, unsigned int channel) 60 { 61 u32 value; 62 63 value = readl(ip->base + IPROC_PWM_CTRL_OFFSET); 64 value &= ~(1 << IPROC_PWM_CTRL_EN_SHIFT(channel)); 65 writel(value, ip->base + IPROC_PWM_CTRL_OFFSET); 66 67 /* must be a 400 ns delay between clearing and setting enable bit */ 68 ndelay(400); 69 } 70 71 static int iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm, 72 struct pwm_state *state) 73 { 74 struct iproc_pwmc *ip = to_iproc_pwmc(chip); 75 u64 tmp, multi, rate; 76 u32 value, prescale; 77 78 value = readl(ip->base + IPROC_PWM_CTRL_OFFSET); 79 80 if (value & BIT(IPROC_PWM_CTRL_EN_SHIFT(pwm->hwpwm))) 81 state->enabled = true; 82 else 83 state->enabled = false; 84 85 if (value & BIT(IPROC_PWM_CTRL_POLARITY_SHIFT(pwm->hwpwm))) 86 state->polarity = PWM_POLARITY_NORMAL; 87 else 88 state->polarity = PWM_POLARITY_INVERSED; 89 90 rate = clk_get_rate(ip->clk); 91 if (rate == 0) { 92 state->period = 0; 93 state->duty_cycle = 0; 94 return 0; 95 } 96 97 value = readl(ip->base + IPROC_PWM_PRESCALE_OFFSET); 98 prescale = value >> IPROC_PWM_PRESCALE_SHIFT(pwm->hwpwm); 99 prescale &= IPROC_PWM_PRESCALE_MAX; 100 101 multi = NSEC_PER_SEC * (prescale + 1); 102 103 value = readl(ip->base + IPROC_PWM_PERIOD_OFFSET(pwm->hwpwm)); 104 tmp = (value & IPROC_PWM_PERIOD_MAX) * multi; 105 state->period = div64_u64(tmp, rate); 106 107 value = readl(ip->base + IPROC_PWM_DUTY_CYCLE_OFFSET(pwm->hwpwm)); 108 tmp = (value & IPROC_PWM_PERIOD_MAX) * multi; 109 state->duty_cycle = div64_u64(tmp, rate); 110 111 return 0; 112 } 113 114 static int iproc_pwmc_apply(struct pwm_chip *chip, struct pwm_device *pwm, 115 const struct pwm_state *state) 116 { 117 unsigned long prescale = IPROC_PWM_PRESCALE_MIN; 118 struct iproc_pwmc *ip = to_iproc_pwmc(chip); 119 u32 value, period, duty; 120 u64 rate; 121 122 rate = clk_get_rate(ip->clk); 123 124 /* 125 * Find period count, duty count and prescale to suit duty_cycle and 126 * period. This is done according to formulas described below: 127 * 128 * period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE 129 * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE 130 * 131 * PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1)) 132 * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1)) 133 */ 134 while (1) { 135 u64 value, div; 136 137 div = NSEC_PER_SEC * (prescale + 1); 138 value = rate * state->period; 139 period = div64_u64(value, div); 140 value = rate * state->duty_cycle; 141 duty = div64_u64(value, div); 142 143 if (period < IPROC_PWM_PERIOD_MIN) 144 return -EINVAL; 145 146 if (period <= IPROC_PWM_PERIOD_MAX && 147 duty <= IPROC_PWM_DUTY_CYCLE_MAX) 148 break; 149 150 /* Otherwise, increase prescale and recalculate counts */ 151 if (++prescale > IPROC_PWM_PRESCALE_MAX) 152 return -EINVAL; 153 } 154 155 iproc_pwmc_disable(ip, pwm->hwpwm); 156 157 /* Set prescale */ 158 value = readl(ip->base + IPROC_PWM_PRESCALE_OFFSET); 159 value &= ~IPROC_PWM_PRESCALE_MASK(pwm->hwpwm); 160 value |= prescale << IPROC_PWM_PRESCALE_SHIFT(pwm->hwpwm); 161 writel(value, ip->base + IPROC_PWM_PRESCALE_OFFSET); 162 163 /* set period and duty cycle */ 164 writel(period, ip->base + IPROC_PWM_PERIOD_OFFSET(pwm->hwpwm)); 165 writel(duty, ip->base + IPROC_PWM_DUTY_CYCLE_OFFSET(pwm->hwpwm)); 166 167 /* set polarity */ 168 value = readl(ip->base + IPROC_PWM_CTRL_OFFSET); 169 170 if (state->polarity == PWM_POLARITY_NORMAL) 171 value |= 1 << IPROC_PWM_CTRL_POLARITY_SHIFT(pwm->hwpwm); 172 else 173 value &= ~(1 << IPROC_PWM_CTRL_POLARITY_SHIFT(pwm->hwpwm)); 174 175 writel(value, ip->base + IPROC_PWM_CTRL_OFFSET); 176 177 if (state->enabled) 178 iproc_pwmc_enable(ip, pwm->hwpwm); 179 180 return 0; 181 } 182 183 static const struct pwm_ops iproc_pwm_ops = { 184 .apply = iproc_pwmc_apply, 185 .get_state = iproc_pwmc_get_state, 186 .owner = THIS_MODULE, 187 }; 188 189 static int iproc_pwmc_probe(struct platform_device *pdev) 190 { 191 struct iproc_pwmc *ip; 192 unsigned int i; 193 u32 value; 194 int ret; 195 196 ip = devm_kzalloc(&pdev->dev, sizeof(*ip), GFP_KERNEL); 197 if (!ip) 198 return -ENOMEM; 199 200 platform_set_drvdata(pdev, ip); 201 202 ip->chip.dev = &pdev->dev; 203 ip->chip.ops = &iproc_pwm_ops; 204 ip->chip.npwm = 4; 205 206 ip->base = devm_platform_ioremap_resource(pdev, 0); 207 if (IS_ERR(ip->base)) 208 return PTR_ERR(ip->base); 209 210 ip->clk = devm_clk_get(&pdev->dev, NULL); 211 if (IS_ERR(ip->clk)) { 212 dev_err(&pdev->dev, "failed to get clock: %ld\n", 213 PTR_ERR(ip->clk)); 214 return PTR_ERR(ip->clk); 215 } 216 217 ret = clk_prepare_enable(ip->clk); 218 if (ret < 0) { 219 dev_err(&pdev->dev, "failed to enable clock: %d\n", ret); 220 return ret; 221 } 222 223 /* Set full drive and normal polarity for all channels */ 224 value = readl(ip->base + IPROC_PWM_CTRL_OFFSET); 225 226 for (i = 0; i < ip->chip.npwm; i++) { 227 value &= ~(1 << IPROC_PWM_CTRL_TYPE_SHIFT(i)); 228 value |= 1 << IPROC_PWM_CTRL_POLARITY_SHIFT(i); 229 } 230 231 writel(value, ip->base + IPROC_PWM_CTRL_OFFSET); 232 233 ret = pwmchip_add(&ip->chip); 234 if (ret < 0) { 235 dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); 236 clk_disable_unprepare(ip->clk); 237 } 238 239 return ret; 240 } 241 242 static int iproc_pwmc_remove(struct platform_device *pdev) 243 { 244 struct iproc_pwmc *ip = platform_get_drvdata(pdev); 245 246 pwmchip_remove(&ip->chip); 247 248 clk_disable_unprepare(ip->clk); 249 250 return 0; 251 } 252 253 static const struct of_device_id bcm_iproc_pwmc_dt[] = { 254 { .compatible = "brcm,iproc-pwm" }, 255 { }, 256 }; 257 MODULE_DEVICE_TABLE(of, bcm_iproc_pwmc_dt); 258 259 static struct platform_driver iproc_pwmc_driver = { 260 .driver = { 261 .name = "bcm-iproc-pwm", 262 .of_match_table = bcm_iproc_pwmc_dt, 263 }, 264 .probe = iproc_pwmc_probe, 265 .remove = iproc_pwmc_remove, 266 }; 267 module_platform_driver(iproc_pwmc_driver); 268 269 MODULE_AUTHOR("Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>"); 270 MODULE_DESCRIPTION("Broadcom iProc PWM driver"); 271 MODULE_LICENSE("GPL v2"); 272