xref: /openbmc/linux/drivers/pwm/pwm-atmel.c (revision c24c57a4)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Driver for Atmel Pulse Width Modulation Controller
4  *
5  * Copyright (C) 2013 Atmel Corporation
6  *		 Bo Shen <voice.shen@atmel.com>
7  */
8 
9 #include <linux/clk.h>
10 #include <linux/delay.h>
11 #include <linux/err.h>
12 #include <linux/io.h>
13 #include <linux/module.h>
14 #include <linux/mutex.h>
15 #include <linux/of.h>
16 #include <linux/of_device.h>
17 #include <linux/platform_device.h>
18 #include <linux/pwm.h>
19 #include <linux/slab.h>
20 
21 /* The following is global registers for PWM controller */
22 #define PWM_ENA			0x04
23 #define PWM_DIS			0x08
24 #define PWM_SR			0x0C
25 #define PWM_ISR			0x1C
26 /* Bit field in SR */
27 #define PWM_SR_ALL_CH_ON	0x0F
28 
29 /* The following register is PWM channel related registers */
30 #define PWM_CH_REG_OFFSET	0x200
31 #define PWM_CH_REG_SIZE		0x20
32 
33 #define PWM_CMR			0x0
34 /* Bit field in CMR */
35 #define PWM_CMR_CPOL		(1 << 9)
36 #define PWM_CMR_UPD_CDTY	(1 << 10)
37 #define PWM_CMR_CPRE_MSK	0xF
38 
39 /* The following registers for PWM v1 */
40 #define PWMV1_CDTY		0x04
41 #define PWMV1_CPRD		0x08
42 #define PWMV1_CUPD		0x10
43 
44 /* The following registers for PWM v2 */
45 #define PWMV2_CDTY		0x04
46 #define PWMV2_CDTYUPD		0x08
47 #define PWMV2_CPRD		0x0C
48 #define PWMV2_CPRDUPD		0x10
49 
50 struct atmel_pwm_registers {
51 	u8 period;
52 	u8 period_upd;
53 	u8 duty;
54 	u8 duty_upd;
55 };
56 
57 struct atmel_pwm_config {
58 	u32 max_period;
59 	u32 max_pres;
60 };
61 
62 struct atmel_pwm_data {
63 	struct atmel_pwm_registers regs;
64 	struct atmel_pwm_config cfg;
65 };
66 
67 struct atmel_pwm_chip {
68 	struct pwm_chip chip;
69 	struct clk *clk;
70 	void __iomem *base;
71 	const struct atmel_pwm_data *data;
72 
73 	unsigned int updated_pwms;
74 	/* ISR is cleared when read, ensure only one thread does that */
75 	struct mutex isr_lock;
76 };
77 
78 static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
79 {
80 	return container_of(chip, struct atmel_pwm_chip, chip);
81 }
82 
83 static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip,
84 				  unsigned long offset)
85 {
86 	return readl_relaxed(chip->base + offset);
87 }
88 
89 static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip,
90 				    unsigned long offset, unsigned long val)
91 {
92 	writel_relaxed(val, chip->base + offset);
93 }
94 
95 static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip,
96 				     unsigned int ch, unsigned long offset)
97 {
98 	unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
99 
100 	return readl_relaxed(chip->base + base + offset);
101 }
102 
103 static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip,
104 				       unsigned int ch, unsigned long offset,
105 				       unsigned long val)
106 {
107 	unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
108 
109 	writel_relaxed(val, chip->base + base + offset);
110 }
111 
112 static int atmel_pwm_calculate_cprd_and_pres(struct pwm_chip *chip,
113 					     const struct pwm_state *state,
114 					     unsigned long *cprd, u32 *pres)
115 {
116 	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
117 	unsigned long long cycles = state->period;
118 
119 	/* Calculate the period cycles and prescale value */
120 	cycles *= clk_get_rate(atmel_pwm->clk);
121 	do_div(cycles, NSEC_PER_SEC);
122 
123 	for (*pres = 0; cycles > atmel_pwm->data->cfg.max_period; cycles >>= 1)
124 		(*pres)++;
125 
126 	if (*pres > atmel_pwm->data->cfg.max_pres) {
127 		dev_err(chip->dev, "pres exceeds the maximum value\n");
128 		return -EINVAL;
129 	}
130 
131 	*cprd = cycles;
132 
133 	return 0;
134 }
135 
136 static void atmel_pwm_calculate_cdty(const struct pwm_state *state,
137 				     unsigned long cprd, unsigned long *cdty)
138 {
139 	unsigned long long cycles = state->duty_cycle;
140 
141 	cycles *= cprd;
142 	do_div(cycles, state->period);
143 	*cdty = cprd - cycles;
144 }
145 
146 static void atmel_pwm_update_cdty(struct pwm_chip *chip, struct pwm_device *pwm,
147 				  unsigned long cdty)
148 {
149 	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
150 	u32 val;
151 
152 	if (atmel_pwm->data->regs.duty_upd ==
153 	    atmel_pwm->data->regs.period_upd) {
154 		val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
155 		val &= ~PWM_CMR_UPD_CDTY;
156 		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
157 	}
158 
159 	atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
160 			    atmel_pwm->data->regs.duty_upd, cdty);
161 }
162 
163 static void atmel_pwm_set_cprd_cdty(struct pwm_chip *chip,
164 				    struct pwm_device *pwm,
165 				    unsigned long cprd, unsigned long cdty)
166 {
167 	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
168 
169 	atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
170 			    atmel_pwm->data->regs.duty, cdty);
171 	atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
172 			    atmel_pwm->data->regs.period, cprd);
173 }
174 
175 static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm,
176 			      bool disable_clk)
177 {
178 	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
179 	unsigned long timeout = jiffies + 2 * HZ;
180 
181 	/*
182 	 * Wait for at least a complete period to have passed before disabling a
183 	 * channel to be sure that CDTY has been updated
184 	 */
185 	mutex_lock(&atmel_pwm->isr_lock);
186 	atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
187 
188 	while (!(atmel_pwm->updated_pwms & (1 << pwm->hwpwm)) &&
189 	       time_before(jiffies, timeout)) {
190 		usleep_range(10, 100);
191 		atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
192 	}
193 
194 	mutex_unlock(&atmel_pwm->isr_lock);
195 	atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm);
196 
197 	/*
198 	 * Wait for the PWM channel disable operation to be effective before
199 	 * stopping the clock.
200 	 */
201 	timeout = jiffies + 2 * HZ;
202 
203 	while ((atmel_pwm_readl(atmel_pwm, PWM_SR) & (1 << pwm->hwpwm)) &&
204 	       time_before(jiffies, timeout))
205 		usleep_range(10, 100);
206 
207 	if (disable_clk)
208 		clk_disable(atmel_pwm->clk);
209 }
210 
211 static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
212 			   const struct pwm_state *state)
213 {
214 	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
215 	struct pwm_state cstate;
216 	unsigned long cprd, cdty;
217 	u32 pres, val;
218 	int ret;
219 
220 	pwm_get_state(pwm, &cstate);
221 
222 	if (state->enabled) {
223 		if (cstate.enabled &&
224 		    cstate.polarity == state->polarity &&
225 		    cstate.period == state->period) {
226 			cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
227 						  atmel_pwm->data->regs.period);
228 			atmel_pwm_calculate_cdty(state, cprd, &cdty);
229 			atmel_pwm_update_cdty(chip, pwm, cdty);
230 			return 0;
231 		}
232 
233 		ret = atmel_pwm_calculate_cprd_and_pres(chip, state, &cprd,
234 							&pres);
235 		if (ret) {
236 			dev_err(chip->dev,
237 				"failed to calculate cprd and prescaler\n");
238 			return ret;
239 		}
240 
241 		atmel_pwm_calculate_cdty(state, cprd, &cdty);
242 
243 		if (cstate.enabled) {
244 			atmel_pwm_disable(chip, pwm, false);
245 		} else {
246 			ret = clk_enable(atmel_pwm->clk);
247 			if (ret) {
248 				dev_err(chip->dev, "failed to enable clock\n");
249 				return ret;
250 			}
251 		}
252 
253 		/* It is necessary to preserve CPOL, inside CMR */
254 		val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
255 		val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK);
256 		if (state->polarity == PWM_POLARITY_NORMAL)
257 			val &= ~PWM_CMR_CPOL;
258 		else
259 			val |= PWM_CMR_CPOL;
260 		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
261 		atmel_pwm_set_cprd_cdty(chip, pwm, cprd, cdty);
262 		mutex_lock(&atmel_pwm->isr_lock);
263 		atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
264 		atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm);
265 		mutex_unlock(&atmel_pwm->isr_lock);
266 		atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
267 	} else if (cstate.enabled) {
268 		atmel_pwm_disable(chip, pwm, true);
269 	}
270 
271 	return 0;
272 }
273 
274 static const struct pwm_ops atmel_pwm_ops = {
275 	.apply = atmel_pwm_apply,
276 	.owner = THIS_MODULE,
277 };
278 
279 static const struct atmel_pwm_data atmel_sam9rl_pwm_data = {
280 	.regs = {
281 		.period		= PWMV1_CPRD,
282 		.period_upd	= PWMV1_CUPD,
283 		.duty		= PWMV1_CDTY,
284 		.duty_upd	= PWMV1_CUPD,
285 	},
286 	.cfg = {
287 		/* 16 bits to keep period and duty. */
288 		.max_period	= 0xffff,
289 		.max_pres	= 10,
290 	},
291 };
292 
293 static const struct atmel_pwm_data atmel_sama5_pwm_data = {
294 	.regs = {
295 		.period		= PWMV2_CPRD,
296 		.period_upd	= PWMV2_CPRDUPD,
297 		.duty		= PWMV2_CDTY,
298 		.duty_upd	= PWMV2_CDTYUPD,
299 	},
300 	.cfg = {
301 		/* 16 bits to keep period and duty. */
302 		.max_period	= 0xffff,
303 		.max_pres	= 10,
304 	},
305 };
306 
307 static const struct atmel_pwm_data mchp_sam9x60_pwm_data = {
308 	.regs = {
309 		.period		= PWMV1_CPRD,
310 		.period_upd	= PWMV1_CUPD,
311 		.duty		= PWMV1_CDTY,
312 		.duty_upd	= PWMV1_CUPD,
313 	},
314 	.cfg = {
315 		/* 32 bits to keep period and duty. */
316 		.max_period	= 0xffffffff,
317 		.max_pres	= 10,
318 	},
319 };
320 
321 static const struct of_device_id atmel_pwm_dt_ids[] = {
322 	{
323 		.compatible = "atmel,at91sam9rl-pwm",
324 		.data = &atmel_sam9rl_pwm_data,
325 	}, {
326 		.compatible = "atmel,sama5d3-pwm",
327 		.data = &atmel_sama5_pwm_data,
328 	}, {
329 		.compatible = "atmel,sama5d2-pwm",
330 		.data = &atmel_sama5_pwm_data,
331 	}, {
332 		.compatible = "microchip,sam9x60-pwm",
333 		.data = &mchp_sam9x60_pwm_data,
334 	}, {
335 		/* sentinel */
336 	},
337 };
338 MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids);
339 
340 static int atmel_pwm_probe(struct platform_device *pdev)
341 {
342 	struct atmel_pwm_chip *atmel_pwm;
343 	struct resource *res;
344 	int ret;
345 
346 	atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL);
347 	if (!atmel_pwm)
348 		return -ENOMEM;
349 
350 	mutex_init(&atmel_pwm->isr_lock);
351 	atmel_pwm->data = of_device_get_match_data(&pdev->dev);
352 	atmel_pwm->updated_pwms = 0;
353 
354 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
355 	atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res);
356 	if (IS_ERR(atmel_pwm->base))
357 		return PTR_ERR(atmel_pwm->base);
358 
359 	atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL);
360 	if (IS_ERR(atmel_pwm->clk))
361 		return PTR_ERR(atmel_pwm->clk);
362 
363 	ret = clk_prepare(atmel_pwm->clk);
364 	if (ret) {
365 		dev_err(&pdev->dev, "failed to prepare PWM clock\n");
366 		return ret;
367 	}
368 
369 	atmel_pwm->chip.dev = &pdev->dev;
370 	atmel_pwm->chip.ops = &atmel_pwm_ops;
371 	atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags;
372 	atmel_pwm->chip.of_pwm_n_cells = 3;
373 	atmel_pwm->chip.base = -1;
374 	atmel_pwm->chip.npwm = 4;
375 
376 	ret = pwmchip_add(&atmel_pwm->chip);
377 	if (ret < 0) {
378 		dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret);
379 		goto unprepare_clk;
380 	}
381 
382 	platform_set_drvdata(pdev, atmel_pwm);
383 
384 	return ret;
385 
386 unprepare_clk:
387 	clk_unprepare(atmel_pwm->clk);
388 	return ret;
389 }
390 
391 static int atmel_pwm_remove(struct platform_device *pdev)
392 {
393 	struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev);
394 
395 	clk_unprepare(atmel_pwm->clk);
396 	mutex_destroy(&atmel_pwm->isr_lock);
397 
398 	return pwmchip_remove(&atmel_pwm->chip);
399 }
400 
401 static struct platform_driver atmel_pwm_driver = {
402 	.driver = {
403 		.name = "atmel-pwm",
404 		.of_match_table = of_match_ptr(atmel_pwm_dt_ids),
405 	},
406 	.probe = atmel_pwm_probe,
407 	.remove = atmel_pwm_remove,
408 };
409 module_platform_driver(atmel_pwm_driver);
410 
411 MODULE_ALIAS("platform:atmel-pwm");
412 MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
413 MODULE_DESCRIPTION("Atmel PWM driver");
414 MODULE_LICENSE("GPL v2");
415