xref: /openbmc/linux/drivers/pwm/pwm-atmel-tcb.c (revision e3b9f1e8)
1 /*
2  * Copyright (C) Overkiz SAS 2012
3  *
4  * Author: Boris BREZILLON <b.brezillon@overkiz.com>
5  * License terms: GNU General Public License (GPL) version 2
6  */
7 
8 #include <linux/module.h>
9 #include <linux/init.h>
10 #include <linux/clocksource.h>
11 #include <linux/clockchips.h>
12 #include <linux/interrupt.h>
13 #include <linux/irq.h>
14 
15 #include <linux/clk.h>
16 #include <linux/err.h>
17 #include <linux/ioport.h>
18 #include <linux/io.h>
19 #include <linux/platform_device.h>
20 #include <linux/atmel_tc.h>
21 #include <linux/pwm.h>
22 #include <linux/of_device.h>
23 #include <linux/slab.h>
24 
25 #define NPWM	6
26 
27 #define ATMEL_TC_ACMR_MASK	(ATMEL_TC_ACPA | ATMEL_TC_ACPC |	\
28 				 ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)
29 
30 #define ATMEL_TC_BCMR_MASK	(ATMEL_TC_BCPB | ATMEL_TC_BCPC |	\
31 				 ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)
32 
33 struct atmel_tcb_pwm_device {
34 	enum pwm_polarity polarity;	/* PWM polarity */
35 	unsigned div;			/* PWM clock divider */
36 	unsigned duty;			/* PWM duty expressed in clk cycles */
37 	unsigned period;		/* PWM period expressed in clk cycles */
38 };
39 
40 struct atmel_tcb_channel {
41 	u32 enabled;
42 	u32 cmr;
43 	u32 ra;
44 	u32 rb;
45 	u32 rc;
46 };
47 
48 struct atmel_tcb_pwm_chip {
49 	struct pwm_chip chip;
50 	spinlock_t lock;
51 	struct atmel_tc *tc;
52 	struct atmel_tcb_pwm_device *pwms[NPWM];
53 	struct atmel_tcb_channel bkup[NPWM / 2];
54 };
55 
56 static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
57 {
58 	return container_of(chip, struct atmel_tcb_pwm_chip, chip);
59 }
60 
61 static int atmel_tcb_pwm_set_polarity(struct pwm_chip *chip,
62 				      struct pwm_device *pwm,
63 				      enum pwm_polarity polarity)
64 {
65 	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
66 
67 	tcbpwm->polarity = polarity;
68 
69 	return 0;
70 }
71 
72 static int atmel_tcb_pwm_request(struct pwm_chip *chip,
73 				 struct pwm_device *pwm)
74 {
75 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
76 	struct atmel_tcb_pwm_device *tcbpwm;
77 	struct atmel_tc *tc = tcbpwmc->tc;
78 	void __iomem *regs = tc->regs;
79 	unsigned group = pwm->hwpwm / 2;
80 	unsigned index = pwm->hwpwm % 2;
81 	unsigned cmr;
82 	int ret;
83 
84 	tcbpwm = devm_kzalloc(chip->dev, sizeof(*tcbpwm), GFP_KERNEL);
85 	if (!tcbpwm)
86 		return -ENOMEM;
87 
88 	ret = clk_prepare_enable(tc->clk[group]);
89 	if (ret) {
90 		devm_kfree(chip->dev, tcbpwm);
91 		return ret;
92 	}
93 
94 	pwm_set_chip_data(pwm, tcbpwm);
95 	tcbpwm->polarity = PWM_POLARITY_NORMAL;
96 	tcbpwm->duty = 0;
97 	tcbpwm->period = 0;
98 	tcbpwm->div = 0;
99 
100 	spin_lock(&tcbpwmc->lock);
101 	cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
102 	/*
103 	 * Get init config from Timer Counter registers if
104 	 * Timer Counter is already configured as a PWM generator.
105 	 */
106 	if (cmr & ATMEL_TC_WAVE) {
107 		if (index == 0)
108 			tcbpwm->duty =
109 				__raw_readl(regs + ATMEL_TC_REG(group, RA));
110 		else
111 			tcbpwm->duty =
112 				__raw_readl(regs + ATMEL_TC_REG(group, RB));
113 
114 		tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
115 		tcbpwm->period = __raw_readl(regs + ATMEL_TC_REG(group, RC));
116 		cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
117 			ATMEL_TC_BCMR_MASK);
118 	} else
119 		cmr = 0;
120 
121 	cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
122 	__raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
123 	spin_unlock(&tcbpwmc->lock);
124 
125 	tcbpwmc->pwms[pwm->hwpwm] = tcbpwm;
126 
127 	return 0;
128 }
129 
130 static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
131 {
132 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
133 	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
134 	struct atmel_tc *tc = tcbpwmc->tc;
135 
136 	clk_disable_unprepare(tc->clk[pwm->hwpwm / 2]);
137 	tcbpwmc->pwms[pwm->hwpwm] = NULL;
138 	devm_kfree(chip->dev, tcbpwm);
139 }
140 
141 static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
142 {
143 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
144 	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
145 	struct atmel_tc *tc = tcbpwmc->tc;
146 	void __iomem *regs = tc->regs;
147 	unsigned group = pwm->hwpwm / 2;
148 	unsigned index = pwm->hwpwm % 2;
149 	unsigned cmr;
150 	enum pwm_polarity polarity = tcbpwm->polarity;
151 
152 	/*
153 	 * If duty is 0 the timer will be stopped and we have to
154 	 * configure the output correctly on software trigger:
155 	 *  - set output to high if PWM_POLARITY_INVERSED
156 	 *  - set output to low if PWM_POLARITY_NORMAL
157 	 *
158 	 * This is why we're reverting polarity in this case.
159 	 */
160 	if (tcbpwm->duty == 0)
161 		polarity = !polarity;
162 
163 	spin_lock(&tcbpwmc->lock);
164 	cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
165 
166 	/* flush old setting and set the new one */
167 	if (index == 0) {
168 		cmr &= ~ATMEL_TC_ACMR_MASK;
169 		if (polarity == PWM_POLARITY_INVERSED)
170 			cmr |= ATMEL_TC_ASWTRG_CLEAR;
171 		else
172 			cmr |= ATMEL_TC_ASWTRG_SET;
173 	} else {
174 		cmr &= ~ATMEL_TC_BCMR_MASK;
175 		if (polarity == PWM_POLARITY_INVERSED)
176 			cmr |= ATMEL_TC_BSWTRG_CLEAR;
177 		else
178 			cmr |= ATMEL_TC_BSWTRG_SET;
179 	}
180 
181 	__raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
182 
183 	/*
184 	 * Use software trigger to apply the new setting.
185 	 * If both PWM devices in this group are disabled we stop the clock.
186 	 */
187 	if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) {
188 		__raw_writel(ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS,
189 			     regs + ATMEL_TC_REG(group, CCR));
190 		tcbpwmc->bkup[group].enabled = 1;
191 	} else {
192 		__raw_writel(ATMEL_TC_SWTRG, regs +
193 			     ATMEL_TC_REG(group, CCR));
194 		tcbpwmc->bkup[group].enabled = 0;
195 	}
196 
197 	spin_unlock(&tcbpwmc->lock);
198 }
199 
200 static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
201 {
202 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
203 	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
204 	struct atmel_tc *tc = tcbpwmc->tc;
205 	void __iomem *regs = tc->regs;
206 	unsigned group = pwm->hwpwm / 2;
207 	unsigned index = pwm->hwpwm % 2;
208 	u32 cmr;
209 	enum pwm_polarity polarity = tcbpwm->polarity;
210 
211 	/*
212 	 * If duty is 0 the timer will be stopped and we have to
213 	 * configure the output correctly on software trigger:
214 	 *  - set output to high if PWM_POLARITY_INVERSED
215 	 *  - set output to low if PWM_POLARITY_NORMAL
216 	 *
217 	 * This is why we're reverting polarity in this case.
218 	 */
219 	if (tcbpwm->duty == 0)
220 		polarity = !polarity;
221 
222 	spin_lock(&tcbpwmc->lock);
223 	cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
224 
225 	/* flush old setting and set the new one */
226 	cmr &= ~ATMEL_TC_TCCLKS;
227 
228 	if (index == 0) {
229 		cmr &= ~ATMEL_TC_ACMR_MASK;
230 
231 		/* Set CMR flags according to given polarity */
232 		if (polarity == PWM_POLARITY_INVERSED)
233 			cmr |= ATMEL_TC_ASWTRG_CLEAR;
234 		else
235 			cmr |= ATMEL_TC_ASWTRG_SET;
236 	} else {
237 		cmr &= ~ATMEL_TC_BCMR_MASK;
238 		if (polarity == PWM_POLARITY_INVERSED)
239 			cmr |= ATMEL_TC_BSWTRG_CLEAR;
240 		else
241 			cmr |= ATMEL_TC_BSWTRG_SET;
242 	}
243 
244 	/*
245 	 * If duty is 0 or equal to period there's no need to register
246 	 * a specific action on RA/RB and RC compare.
247 	 * The output will be configured on software trigger and keep
248 	 * this config till next config call.
249 	 */
250 	if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
251 		if (index == 0) {
252 			if (polarity == PWM_POLARITY_INVERSED)
253 				cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
254 			else
255 				cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
256 		} else {
257 			if (polarity == PWM_POLARITY_INVERSED)
258 				cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
259 			else
260 				cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
261 		}
262 	}
263 
264 	cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS);
265 
266 	__raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
267 
268 	if (index == 0)
269 		__raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RA));
270 	else
271 		__raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RB));
272 
273 	__raw_writel(tcbpwm->period, regs + ATMEL_TC_REG(group, RC));
274 
275 	/* Use software trigger to apply the new setting */
276 	__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
277 		     regs + ATMEL_TC_REG(group, CCR));
278 	tcbpwmc->bkup[group].enabled = 1;
279 	spin_unlock(&tcbpwmc->lock);
280 	return 0;
281 }
282 
283 static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
284 				int duty_ns, int period_ns)
285 {
286 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
287 	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
288 	unsigned group = pwm->hwpwm / 2;
289 	unsigned index = pwm->hwpwm % 2;
290 	struct atmel_tcb_pwm_device *atcbpwm = NULL;
291 	struct atmel_tc *tc = tcbpwmc->tc;
292 	int i;
293 	int slowclk = 0;
294 	unsigned period;
295 	unsigned duty;
296 	unsigned rate = clk_get_rate(tc->clk[group]);
297 	unsigned long long min;
298 	unsigned long long max;
299 
300 	/*
301 	 * Find best clk divisor:
302 	 * the smallest divisor which can fulfill the period_ns requirements.
303 	 */
304 	for (i = 0; i < 5; ++i) {
305 		if (atmel_tc_divisors[i] == 0) {
306 			slowclk = i;
307 			continue;
308 		}
309 		min = div_u64((u64)NSEC_PER_SEC * atmel_tc_divisors[i], rate);
310 		max = min << tc->tcb_config->counter_width;
311 		if (max >= period_ns)
312 			break;
313 	}
314 
315 	/*
316 	 * If none of the divisor are small enough to represent period_ns
317 	 * take slow clock (32KHz).
318 	 */
319 	if (i == 5) {
320 		i = slowclk;
321 		rate = clk_get_rate(tc->slow_clk);
322 		min = div_u64(NSEC_PER_SEC, rate);
323 		max = min << tc->tcb_config->counter_width;
324 
325 		/* If period is too big return ERANGE error */
326 		if (max < period_ns)
327 			return -ERANGE;
328 	}
329 
330 	duty = div_u64(duty_ns, min);
331 	period = div_u64(period_ns, min);
332 
333 	if (index == 0)
334 		atcbpwm = tcbpwmc->pwms[pwm->hwpwm + 1];
335 	else
336 		atcbpwm = tcbpwmc->pwms[pwm->hwpwm - 1];
337 
338 	/*
339 	 * PWM devices provided by TCB driver are grouped by 2:
340 	 * - group 0: PWM 0 & 1
341 	 * - group 1: PWM 2 & 3
342 	 * - group 2: PWM 4 & 5
343 	 *
344 	 * PWM devices in a given group must be configured with the
345 	 * same period_ns.
346 	 *
347 	 * We're checking the period value of the second PWM device
348 	 * in this group before applying the new config.
349 	 */
350 	if ((atcbpwm && atcbpwm->duty > 0 &&
351 			atcbpwm->duty != atcbpwm->period) &&
352 		(atcbpwm->div != i || atcbpwm->period != period)) {
353 		dev_err(chip->dev,
354 			"failed to configure period_ns: PWM group already configured with a different value\n");
355 		return -EINVAL;
356 	}
357 
358 	tcbpwm->period = period;
359 	tcbpwm->div = i;
360 	tcbpwm->duty = duty;
361 
362 	/* If the PWM is enabled, call enable to apply the new conf */
363 	if (pwm_is_enabled(pwm))
364 		atmel_tcb_pwm_enable(chip, pwm);
365 
366 	return 0;
367 }
368 
369 static const struct pwm_ops atmel_tcb_pwm_ops = {
370 	.request = atmel_tcb_pwm_request,
371 	.free = atmel_tcb_pwm_free,
372 	.config = atmel_tcb_pwm_config,
373 	.set_polarity = atmel_tcb_pwm_set_polarity,
374 	.enable = atmel_tcb_pwm_enable,
375 	.disable = atmel_tcb_pwm_disable,
376 	.owner = THIS_MODULE,
377 };
378 
379 static int atmel_tcb_pwm_probe(struct platform_device *pdev)
380 {
381 	struct atmel_tcb_pwm_chip *tcbpwm;
382 	struct device_node *np = pdev->dev.of_node;
383 	struct atmel_tc *tc;
384 	int err;
385 	int tcblock;
386 
387 	err = of_property_read_u32(np, "tc-block", &tcblock);
388 	if (err < 0) {
389 		dev_err(&pdev->dev,
390 			"failed to get Timer Counter Block number from device tree (error: %d)\n",
391 			err);
392 		return err;
393 	}
394 
395 	tc = atmel_tc_alloc(tcblock);
396 	if (tc == NULL) {
397 		dev_err(&pdev->dev, "failed to allocate Timer Counter Block\n");
398 		return -ENOMEM;
399 	}
400 
401 	tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
402 	if (tcbpwm == NULL) {
403 		err = -ENOMEM;
404 		dev_err(&pdev->dev, "failed to allocate memory\n");
405 		goto err_free_tc;
406 	}
407 
408 	tcbpwm->chip.dev = &pdev->dev;
409 	tcbpwm->chip.ops = &atmel_tcb_pwm_ops;
410 	tcbpwm->chip.of_xlate = of_pwm_xlate_with_flags;
411 	tcbpwm->chip.of_pwm_n_cells = 3;
412 	tcbpwm->chip.base = -1;
413 	tcbpwm->chip.npwm = NPWM;
414 	tcbpwm->tc = tc;
415 
416 	err = clk_prepare_enable(tc->slow_clk);
417 	if (err)
418 		goto err_free_tc;
419 
420 	spin_lock_init(&tcbpwm->lock);
421 
422 	err = pwmchip_add(&tcbpwm->chip);
423 	if (err < 0)
424 		goto err_disable_clk;
425 
426 	platform_set_drvdata(pdev, tcbpwm);
427 
428 	return 0;
429 
430 err_disable_clk:
431 	clk_disable_unprepare(tcbpwm->tc->slow_clk);
432 
433 err_free_tc:
434 	atmel_tc_free(tc);
435 
436 	return err;
437 }
438 
439 static int atmel_tcb_pwm_remove(struct platform_device *pdev)
440 {
441 	struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
442 	int err;
443 
444 	clk_disable_unprepare(tcbpwm->tc->slow_clk);
445 
446 	err = pwmchip_remove(&tcbpwm->chip);
447 	if (err < 0)
448 		return err;
449 
450 	atmel_tc_free(tcbpwm->tc);
451 
452 	return 0;
453 }
454 
455 static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
456 	{ .compatible = "atmel,tcb-pwm", },
457 	{ /* sentinel */ }
458 };
459 MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
460 
461 #ifdef CONFIG_PM_SLEEP
462 static int atmel_tcb_pwm_suspend(struct device *dev)
463 {
464 	struct platform_device *pdev = to_platform_device(dev);
465 	struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
466 	void __iomem *base = tcbpwm->tc->regs;
467 	int i;
468 
469 	for (i = 0; i < (NPWM / 2); i++) {
470 		struct atmel_tcb_channel *chan = &tcbpwm->bkup[i];
471 
472 		chan->cmr = readl(base + ATMEL_TC_REG(i, CMR));
473 		chan->ra = readl(base + ATMEL_TC_REG(i, RA));
474 		chan->rb = readl(base + ATMEL_TC_REG(i, RB));
475 		chan->rc = readl(base + ATMEL_TC_REG(i, RC));
476 	}
477 	return 0;
478 }
479 
480 static int atmel_tcb_pwm_resume(struct device *dev)
481 {
482 	struct platform_device *pdev = to_platform_device(dev);
483 	struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
484 	void __iomem *base = tcbpwm->tc->regs;
485 	int i;
486 
487 	for (i = 0; i < (NPWM / 2); i++) {
488 		struct atmel_tcb_channel *chan = &tcbpwm->bkup[i];
489 
490 		writel(chan->cmr, base + ATMEL_TC_REG(i, CMR));
491 		writel(chan->ra, base + ATMEL_TC_REG(i, RA));
492 		writel(chan->rb, base + ATMEL_TC_REG(i, RB));
493 		writel(chan->rc, base + ATMEL_TC_REG(i, RC));
494 		if (chan->enabled) {
495 			writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
496 				base + ATMEL_TC_REG(i, CCR));
497 		}
498 	}
499 	return 0;
500 }
501 #endif
502 
503 static SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend,
504 			 atmel_tcb_pwm_resume);
505 
506 static struct platform_driver atmel_tcb_pwm_driver = {
507 	.driver = {
508 		.name = "atmel-tcb-pwm",
509 		.of_match_table = atmel_tcb_pwm_dt_ids,
510 		.pm = &atmel_tcb_pwm_pm_ops,
511 	},
512 	.probe = atmel_tcb_pwm_probe,
513 	.remove = atmel_tcb_pwm_remove,
514 };
515 module_platform_driver(atmel_tcb_pwm_driver);
516 
517 MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
518 MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
519 MODULE_LICENSE("GPL v2");
520