xref: /openbmc/linux/drivers/pwm/pwm-atmel-tcb.c (revision 2a954832)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) Overkiz SAS 2012
4  *
5  * Author: Boris BREZILLON <b.brezillon@overkiz.com>
6  */
7 
8 #include <linux/module.h>
9 #include <linux/init.h>
10 #include <linux/clocksource.h>
11 #include <linux/clockchips.h>
12 #include <linux/interrupt.h>
13 #include <linux/irq.h>
14 
15 #include <linux/clk.h>
16 #include <linux/err.h>
17 #include <linux/ioport.h>
18 #include <linux/io.h>
19 #include <linux/mfd/syscon.h>
20 #include <linux/platform_device.h>
21 #include <linux/pwm.h>
22 #include <linux/of_device.h>
23 #include <linux/of_irq.h>
24 #include <linux/regmap.h>
25 #include <linux/slab.h>
26 #include <soc/at91/atmel_tcb.h>
27 
28 #define NPWM	2
29 
30 #define ATMEL_TC_ACMR_MASK	(ATMEL_TC_ACPA | ATMEL_TC_ACPC |	\
31 				 ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)
32 
33 #define ATMEL_TC_BCMR_MASK	(ATMEL_TC_BCPB | ATMEL_TC_BCPC |	\
34 				 ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)
35 
36 struct atmel_tcb_pwm_device {
37 	enum pwm_polarity polarity;	/* PWM polarity */
38 	unsigned div;			/* PWM clock divider */
39 	unsigned duty;			/* PWM duty expressed in clk cycles */
40 	unsigned period;		/* PWM period expressed in clk cycles */
41 };
42 
43 struct atmel_tcb_channel {
44 	u32 enabled;
45 	u32 cmr;
46 	u32 ra;
47 	u32 rb;
48 	u32 rc;
49 };
50 
51 struct atmel_tcb_pwm_chip {
52 	struct pwm_chip chip;
53 	spinlock_t lock;
54 	u8 channel;
55 	u8 width;
56 	struct regmap *regmap;
57 	struct clk *clk;
58 	struct clk *gclk;
59 	struct clk *slow_clk;
60 	struct atmel_tcb_pwm_device *pwms[NPWM];
61 	struct atmel_tcb_channel bkup;
62 };
63 
64 static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128, 0, };
65 
66 static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
67 {
68 	return container_of(chip, struct atmel_tcb_pwm_chip, chip);
69 }
70 
71 static int atmel_tcb_pwm_set_polarity(struct pwm_chip *chip,
72 				      struct pwm_device *pwm,
73 				      enum pwm_polarity polarity)
74 {
75 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
76 	struct atmel_tcb_pwm_device *tcbpwm = tcbpwmc->pwms[pwm->hwpwm];
77 
78 	tcbpwm->polarity = polarity;
79 
80 	return 0;
81 }
82 
83 static int atmel_tcb_pwm_request(struct pwm_chip *chip,
84 				 struct pwm_device *pwm)
85 {
86 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
87 	struct atmel_tcb_pwm_device *tcbpwm;
88 	unsigned cmr;
89 	int ret;
90 
91 	tcbpwm = devm_kzalloc(chip->dev, sizeof(*tcbpwm), GFP_KERNEL);
92 	if (!tcbpwm)
93 		return -ENOMEM;
94 
95 	ret = clk_prepare_enable(tcbpwmc->clk);
96 	if (ret) {
97 		devm_kfree(chip->dev, tcbpwm);
98 		return ret;
99 	}
100 
101 	tcbpwm->polarity = PWM_POLARITY_NORMAL;
102 	tcbpwm->duty = 0;
103 	tcbpwm->period = 0;
104 	tcbpwm->div = 0;
105 
106 	spin_lock(&tcbpwmc->lock);
107 	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
108 	/*
109 	 * Get init config from Timer Counter registers if
110 	 * Timer Counter is already configured as a PWM generator.
111 	 */
112 	if (cmr & ATMEL_TC_WAVE) {
113 		if (pwm->hwpwm == 0)
114 			regmap_read(tcbpwmc->regmap,
115 				    ATMEL_TC_REG(tcbpwmc->channel, RA),
116 				    &tcbpwm->duty);
117 		else
118 			regmap_read(tcbpwmc->regmap,
119 				    ATMEL_TC_REG(tcbpwmc->channel, RB),
120 				    &tcbpwm->duty);
121 
122 		tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
123 		regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
124 			    &tcbpwm->period);
125 		cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
126 			ATMEL_TC_BCMR_MASK);
127 	} else
128 		cmr = 0;
129 
130 	cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
131 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
132 	spin_unlock(&tcbpwmc->lock);
133 
134 	tcbpwmc->pwms[pwm->hwpwm] = tcbpwm;
135 
136 	return 0;
137 }
138 
139 static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
140 {
141 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
142 	struct atmel_tcb_pwm_device *tcbpwm = tcbpwmc->pwms[pwm->hwpwm];
143 
144 	clk_disable_unprepare(tcbpwmc->clk);
145 	tcbpwmc->pwms[pwm->hwpwm] = NULL;
146 	devm_kfree(chip->dev, tcbpwm);
147 }
148 
149 static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
150 {
151 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
152 	struct atmel_tcb_pwm_device *tcbpwm = tcbpwmc->pwms[pwm->hwpwm];
153 	unsigned cmr;
154 	enum pwm_polarity polarity = tcbpwm->polarity;
155 
156 	/*
157 	 * If duty is 0 the timer will be stopped and we have to
158 	 * configure the output correctly on software trigger:
159 	 *  - set output to high if PWM_POLARITY_INVERSED
160 	 *  - set output to low if PWM_POLARITY_NORMAL
161 	 *
162 	 * This is why we're reverting polarity in this case.
163 	 */
164 	if (tcbpwm->duty == 0)
165 		polarity = !polarity;
166 
167 	spin_lock(&tcbpwmc->lock);
168 	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
169 
170 	/* flush old setting and set the new one */
171 	if (pwm->hwpwm == 0) {
172 		cmr &= ~ATMEL_TC_ACMR_MASK;
173 		if (polarity == PWM_POLARITY_INVERSED)
174 			cmr |= ATMEL_TC_ASWTRG_CLEAR;
175 		else
176 			cmr |= ATMEL_TC_ASWTRG_SET;
177 	} else {
178 		cmr &= ~ATMEL_TC_BCMR_MASK;
179 		if (polarity == PWM_POLARITY_INVERSED)
180 			cmr |= ATMEL_TC_BSWTRG_CLEAR;
181 		else
182 			cmr |= ATMEL_TC_BSWTRG_SET;
183 	}
184 
185 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
186 
187 	/*
188 	 * Use software trigger to apply the new setting.
189 	 * If both PWM devices in this group are disabled we stop the clock.
190 	 */
191 	if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) {
192 		regmap_write(tcbpwmc->regmap,
193 			     ATMEL_TC_REG(tcbpwmc->channel, CCR),
194 			     ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS);
195 		tcbpwmc->bkup.enabled = 1;
196 	} else {
197 		regmap_write(tcbpwmc->regmap,
198 			     ATMEL_TC_REG(tcbpwmc->channel, CCR),
199 			     ATMEL_TC_SWTRG);
200 		tcbpwmc->bkup.enabled = 0;
201 	}
202 
203 	spin_unlock(&tcbpwmc->lock);
204 }
205 
206 static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
207 {
208 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
209 	struct atmel_tcb_pwm_device *tcbpwm = tcbpwmc->pwms[pwm->hwpwm];
210 	u32 cmr;
211 	enum pwm_polarity polarity = tcbpwm->polarity;
212 
213 	/*
214 	 * If duty is 0 the timer will be stopped and we have to
215 	 * configure the output correctly on software trigger:
216 	 *  - set output to high if PWM_POLARITY_INVERSED
217 	 *  - set output to low if PWM_POLARITY_NORMAL
218 	 *
219 	 * This is why we're reverting polarity in this case.
220 	 */
221 	if (tcbpwm->duty == 0)
222 		polarity = !polarity;
223 
224 	spin_lock(&tcbpwmc->lock);
225 	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
226 
227 	/* flush old setting and set the new one */
228 	cmr &= ~ATMEL_TC_TCCLKS;
229 
230 	if (pwm->hwpwm == 0) {
231 		cmr &= ~ATMEL_TC_ACMR_MASK;
232 
233 		/* Set CMR flags according to given polarity */
234 		if (polarity == PWM_POLARITY_INVERSED)
235 			cmr |= ATMEL_TC_ASWTRG_CLEAR;
236 		else
237 			cmr |= ATMEL_TC_ASWTRG_SET;
238 	} else {
239 		cmr &= ~ATMEL_TC_BCMR_MASK;
240 		if (polarity == PWM_POLARITY_INVERSED)
241 			cmr |= ATMEL_TC_BSWTRG_CLEAR;
242 		else
243 			cmr |= ATMEL_TC_BSWTRG_SET;
244 	}
245 
246 	/*
247 	 * If duty is 0 or equal to period there's no need to register
248 	 * a specific action on RA/RB and RC compare.
249 	 * The output will be configured on software trigger and keep
250 	 * this config till next config call.
251 	 */
252 	if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
253 		if (pwm->hwpwm == 0) {
254 			if (polarity == PWM_POLARITY_INVERSED)
255 				cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
256 			else
257 				cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
258 		} else {
259 			if (polarity == PWM_POLARITY_INVERSED)
260 				cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
261 			else
262 				cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
263 		}
264 	}
265 
266 	cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS);
267 
268 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
269 
270 	if (pwm->hwpwm == 0)
271 		regmap_write(tcbpwmc->regmap,
272 			     ATMEL_TC_REG(tcbpwmc->channel, RA),
273 			     tcbpwm->duty);
274 	else
275 		regmap_write(tcbpwmc->regmap,
276 			     ATMEL_TC_REG(tcbpwmc->channel, RB),
277 			     tcbpwm->duty);
278 
279 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
280 		     tcbpwm->period);
281 
282 	/* Use software trigger to apply the new setting */
283 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CCR),
284 		     ATMEL_TC_SWTRG | ATMEL_TC_CLKEN);
285 	tcbpwmc->bkup.enabled = 1;
286 	spin_unlock(&tcbpwmc->lock);
287 	return 0;
288 }
289 
290 static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
291 				int duty_ns, int period_ns)
292 {
293 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
294 	struct atmel_tcb_pwm_device *tcbpwm = tcbpwmc->pwms[pwm->hwpwm];
295 	struct atmel_tcb_pwm_device *atcbpwm = NULL;
296 	int i = 0;
297 	int slowclk = 0;
298 	unsigned period;
299 	unsigned duty;
300 	unsigned rate = clk_get_rate(tcbpwmc->clk);
301 	unsigned long long min;
302 	unsigned long long max;
303 
304 	/*
305 	 * Find best clk divisor:
306 	 * the smallest divisor which can fulfill the period_ns requirements.
307 	 * If there is a gclk, the first divisor is actually the gclk selector
308 	 */
309 	if (tcbpwmc->gclk)
310 		i = 1;
311 	for (; i < ARRAY_SIZE(atmel_tcb_divisors); ++i) {
312 		if (atmel_tcb_divisors[i] == 0) {
313 			slowclk = i;
314 			continue;
315 		}
316 		min = div_u64((u64)NSEC_PER_SEC * atmel_tcb_divisors[i], rate);
317 		max = min << tcbpwmc->width;
318 		if (max >= period_ns)
319 			break;
320 	}
321 
322 	/*
323 	 * If none of the divisor are small enough to represent period_ns
324 	 * take slow clock (32KHz).
325 	 */
326 	if (i == ARRAY_SIZE(atmel_tcb_divisors)) {
327 		i = slowclk;
328 		rate = clk_get_rate(tcbpwmc->slow_clk);
329 		min = div_u64(NSEC_PER_SEC, rate);
330 		max = min << tcbpwmc->width;
331 
332 		/* If period is too big return ERANGE error */
333 		if (max < period_ns)
334 			return -ERANGE;
335 	}
336 
337 	duty = div_u64(duty_ns, min);
338 	period = div_u64(period_ns, min);
339 
340 	if (pwm->hwpwm == 0)
341 		atcbpwm = tcbpwmc->pwms[1];
342 	else
343 		atcbpwm = tcbpwmc->pwms[0];
344 
345 	/*
346 	 * PWM devices provided by the TCB driver are grouped by 2.
347 	 * PWM devices in a given group must be configured with the
348 	 * same period_ns.
349 	 *
350 	 * We're checking the period value of the second PWM device
351 	 * in this group before applying the new config.
352 	 */
353 	if ((atcbpwm && atcbpwm->duty > 0 &&
354 			atcbpwm->duty != atcbpwm->period) &&
355 		(atcbpwm->div != i || atcbpwm->period != period)) {
356 		dev_err(chip->dev,
357 			"failed to configure period_ns: PWM group already configured with a different value\n");
358 		return -EINVAL;
359 	}
360 
361 	tcbpwm->period = period;
362 	tcbpwm->div = i;
363 	tcbpwm->duty = duty;
364 
365 	return 0;
366 }
367 
368 static int atmel_tcb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
369 			       const struct pwm_state *state)
370 {
371 	int duty_cycle, period;
372 	int ret;
373 
374 	/* This function only sets a flag in driver data */
375 	atmel_tcb_pwm_set_polarity(chip, pwm, state->polarity);
376 
377 	if (!state->enabled) {
378 		atmel_tcb_pwm_disable(chip, pwm);
379 		return 0;
380 	}
381 
382 	period = state->period < INT_MAX ? state->period : INT_MAX;
383 	duty_cycle = state->duty_cycle < INT_MAX ? state->duty_cycle : INT_MAX;
384 
385 	ret = atmel_tcb_pwm_config(chip, pwm, duty_cycle, period);
386 	if (ret)
387 		return ret;
388 
389 	return atmel_tcb_pwm_enable(chip, pwm);
390 }
391 
392 static const struct pwm_ops atmel_tcb_pwm_ops = {
393 	.request = atmel_tcb_pwm_request,
394 	.free = atmel_tcb_pwm_free,
395 	.apply = atmel_tcb_pwm_apply,
396 	.owner = THIS_MODULE,
397 };
398 
399 static struct atmel_tcb_config tcb_rm9200_config = {
400 	.counter_width = 16,
401 };
402 
403 static struct atmel_tcb_config tcb_sam9x5_config = {
404 	.counter_width = 32,
405 };
406 
407 static struct atmel_tcb_config tcb_sama5d2_config = {
408 	.counter_width = 32,
409 	.has_gclk = 1,
410 };
411 
412 static const struct of_device_id atmel_tcb_of_match[] = {
413 	{ .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
414 	{ .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
415 	{ .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
416 	{ /* sentinel */ }
417 };
418 
419 static int atmel_tcb_pwm_probe(struct platform_device *pdev)
420 {
421 	const struct of_device_id *match;
422 	struct atmel_tcb_pwm_chip *tcbpwm;
423 	const struct atmel_tcb_config *config;
424 	struct device_node *np = pdev->dev.of_node;
425 	struct regmap *regmap;
426 	struct clk *clk, *gclk = NULL;
427 	struct clk *slow_clk;
428 	char clk_name[] = "t0_clk";
429 	int err;
430 	int channel;
431 
432 	err = of_property_read_u32(np, "reg", &channel);
433 	if (err < 0) {
434 		dev_err(&pdev->dev,
435 			"failed to get Timer Counter Block channel from device tree (error: %d)\n",
436 			err);
437 		return err;
438 	}
439 
440 	regmap = syscon_node_to_regmap(np->parent);
441 	if (IS_ERR(regmap))
442 		return PTR_ERR(regmap);
443 
444 	slow_clk = of_clk_get_by_name(np->parent, "slow_clk");
445 	if (IS_ERR(slow_clk))
446 		return PTR_ERR(slow_clk);
447 
448 	clk_name[1] += channel;
449 	clk = of_clk_get_by_name(np->parent, clk_name);
450 	if (IS_ERR(clk))
451 		clk = of_clk_get_by_name(np->parent, "t0_clk");
452 	if (IS_ERR(clk))
453 		return PTR_ERR(clk);
454 
455 	match = of_match_node(atmel_tcb_of_match, np->parent);
456 	config = match->data;
457 
458 	if (config->has_gclk) {
459 		gclk = of_clk_get_by_name(np->parent, "gclk");
460 		if (IS_ERR(gclk))
461 			return PTR_ERR(gclk);
462 	}
463 
464 	tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
465 	if (tcbpwm == NULL) {
466 		err = -ENOMEM;
467 		goto err_slow_clk;
468 	}
469 
470 	tcbpwm->chip.dev = &pdev->dev;
471 	tcbpwm->chip.ops = &atmel_tcb_pwm_ops;
472 	tcbpwm->chip.npwm = NPWM;
473 	tcbpwm->channel = channel;
474 	tcbpwm->regmap = regmap;
475 	tcbpwm->clk = clk;
476 	tcbpwm->gclk = gclk;
477 	tcbpwm->slow_clk = slow_clk;
478 	tcbpwm->width = config->counter_width;
479 
480 	err = clk_prepare_enable(slow_clk);
481 	if (err)
482 		goto err_slow_clk;
483 
484 	spin_lock_init(&tcbpwm->lock);
485 
486 	err = pwmchip_add(&tcbpwm->chip);
487 	if (err < 0)
488 		goto err_disable_clk;
489 
490 	platform_set_drvdata(pdev, tcbpwm);
491 
492 	return 0;
493 
494 err_disable_clk:
495 	clk_disable_unprepare(tcbpwm->slow_clk);
496 
497 err_slow_clk:
498 	clk_put(slow_clk);
499 
500 	return err;
501 }
502 
503 static void atmel_tcb_pwm_remove(struct platform_device *pdev)
504 {
505 	struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
506 
507 	pwmchip_remove(&tcbpwm->chip);
508 
509 	clk_disable_unprepare(tcbpwm->slow_clk);
510 	clk_put(tcbpwm->slow_clk);
511 	clk_put(tcbpwm->clk);
512 }
513 
514 static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
515 	{ .compatible = "atmel,tcb-pwm", },
516 	{ /* sentinel */ }
517 };
518 MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
519 
520 #ifdef CONFIG_PM_SLEEP
521 static int atmel_tcb_pwm_suspend(struct device *dev)
522 {
523 	struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev);
524 	struct atmel_tcb_channel *chan = &tcbpwm->bkup;
525 	unsigned int channel = tcbpwm->channel;
526 
527 	regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), &chan->cmr);
528 	regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), &chan->ra);
529 	regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), &chan->rb);
530 	regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), &chan->rc);
531 
532 	return 0;
533 }
534 
535 static int atmel_tcb_pwm_resume(struct device *dev)
536 {
537 	struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev);
538 	struct atmel_tcb_channel *chan = &tcbpwm->bkup;
539 	unsigned int channel = tcbpwm->channel;
540 
541 	regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), chan->cmr);
542 	regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), chan->ra);
543 	regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), chan->rb);
544 	regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), chan->rc);
545 
546 	if (chan->enabled)
547 		regmap_write(tcbpwm->regmap,
548 			     ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
549 			     ATMEL_TC_REG(channel, CCR));
550 
551 	return 0;
552 }
553 #endif
554 
555 static SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend,
556 			 atmel_tcb_pwm_resume);
557 
558 static struct platform_driver atmel_tcb_pwm_driver = {
559 	.driver = {
560 		.name = "atmel-tcb-pwm",
561 		.of_match_table = atmel_tcb_pwm_dt_ids,
562 		.pm = &atmel_tcb_pwm_pm_ops,
563 	},
564 	.probe = atmel_tcb_pwm_probe,
565 	.remove_new = atmel_tcb_pwm_remove,
566 };
567 module_platform_driver(atmel_tcb_pwm_driver);
568 
569 MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
570 MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
571 MODULE_LICENSE("GPL v2");
572