xref: /openbmc/linux/drivers/pwm/Kconfig (revision b868a02e)
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig PWM
3	bool "Pulse-Width Modulation (PWM) Support"
4	help
5	  Generic Pulse-Width Modulation (PWM) support.
6
7	  In Pulse-Width Modulation, a variation of the width of pulses
8	  in a rectangular pulse signal is used as a means to alter the
9	  average power of the signal. Applications include efficient
10	  power delivery and voltage regulation. In computer systems,
11	  PWMs are commonly used to control fans or the brightness of
12	  display backlights.
13
14	  This framework provides a generic interface to PWM devices
15	  within the Linux kernel. On the driver side it provides an API
16	  to register and unregister a PWM chip, an abstraction of a PWM
17	  controller, that supports one or more PWM devices. Client
18	  drivers can request PWM devices and use the generic framework
19	  to configure as well as enable and disable them.
20
21	  This generic framework replaces the legacy PWM framework which
22	  allows only a single driver implementing the required API. Not
23	  all legacy implementations have been ported to the framework
24	  yet. The framework provides an API that is backward compatible
25	  with the legacy framework so that existing client drivers
26	  continue to work as expected.
27
28	  If unsure, say no.
29
30if PWM
31
32config PWM_SYSFS
33	bool
34	default y if SYSFS
35
36config PWM_DEBUG
37	bool "PWM lowlevel drivers additional checks and debug messages"
38	depends on DEBUG_KERNEL
39	help
40	  This option enables some additional checks to help lowlevel driver
41	  authors to get their callbacks implemented correctly.
42	  It is expected to introduce some runtime overhead and diagnostic
43	  output to the kernel log, so only enable while working on a driver.
44
45config PWM_AB8500
46	tristate "AB8500 PWM support"
47	depends on AB8500_CORE && ARCH_U8500
48	help
49	  Generic PWM framework driver for Analog Baseband AB8500.
50
51	  To compile this driver as a module, choose M here: the module
52	  will be called pwm-ab8500.
53
54config PWM_ATMEL
55	tristate "Atmel PWM support"
56	depends on ARCH_AT91 || COMPILE_TEST
57	depends on HAS_IOMEM && OF
58	help
59	  Generic PWM framework driver for Atmel SoC.
60
61	  To compile this driver as a module, choose M here: the module
62	  will be called pwm-atmel.
63
64config PWM_ATMEL_HLCDC_PWM
65	tristate "Atmel HLCDC PWM support"
66	depends on MFD_ATMEL_HLCDC
67	depends on HAVE_CLK
68	help
69	  Generic PWM framework driver for the PWM output of the HLCDC
70	  (Atmel High-end LCD Controller). This PWM output is mainly used
71	  to control the LCD backlight.
72
73	  To compile this driver as a module, choose M here: the module
74	  will be called pwm-atmel-hlcdc.
75
76config PWM_ATMEL_TCB
77	tristate "Atmel TC Block PWM support"
78	depends on OF
79	select REGMAP_MMIO
80	help
81	  Generic PWM framework driver for Atmel Timer Counter Block.
82
83	  A Timer Counter Block provides 6 PWM devices grouped by 2.
84	  Devices in a given group must have the same period.
85
86	  To compile this driver as a module, choose M here: the module
87	  will be called pwm-atmel-tcb.
88
89config PWM_BCM_IPROC
90	tristate "iProc PWM support"
91	depends on ARCH_BCM_IPROC || COMPILE_TEST
92	depends on COMMON_CLK && HAS_IOMEM
93	default ARCH_BCM_IPROC
94	help
95	  Generic PWM framework driver for Broadcom iProc PWM block. This
96	  block is used in Broadcom iProc SoC's.
97
98	  To compile this driver as a module, choose M here: the module
99	  will be called pwm-bcm-iproc.
100
101config PWM_BCM_KONA
102	tristate "Kona PWM support"
103	depends on ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS || COMPILE_TEST
104	depends on HAVE_CLK && HAS_IOMEM
105	default ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS
106	help
107	  Generic PWM framework driver for Broadcom Kona PWM block.
108
109	  To compile this driver as a module, choose M here: the module
110	  will be called pwm-bcm-kona.
111
112config PWM_BCM2835
113	tristate "BCM2835 PWM support"
114	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
115	depends on HAS_IOMEM
116	help
117	  PWM framework driver for BCM2835 controller (Raspberry Pi)
118
119	  To compile this driver as a module, choose M here: the module
120	  will be called pwm-bcm2835.
121
122config PWM_BERLIN
123	tristate "Marvell Berlin PWM support"
124	depends on ARCH_BERLIN || COMPILE_TEST
125	depends on HAS_IOMEM
126	help
127	  PWM framework driver for Marvell Berlin SoCs.
128
129	  To compile this driver as a module, choose M here: the module
130	  will be called pwm-berlin.
131
132config PWM_BRCMSTB
133	tristate "Broadcom STB PWM support"
134	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
135	depends on HAS_IOMEM
136	help
137	  Generic PWM framework driver for the Broadcom Set-top-Box
138	  SoCs (BCM7xxx).
139
140	  To compile this driver as a module, choose M Here: the module
141	  will be called pwm-brcmstb.c.
142
143config PWM_CLK
144	tristate "Clock based PWM support"
145	depends on HAVE_CLK || COMPILE_TEST
146	help
147	  Generic PWM framework driver for outputs that can be
148	  muxed to clocks.
149
150	  To compile this driver as a module, choose M here: the module
151	  will be called pwm-clk.
152
153config PWM_CLPS711X
154	tristate "CLPS711X PWM support"
155	depends on ARCH_CLPS711X || COMPILE_TEST
156	depends on HAS_IOMEM
157	help
158	  Generic PWM framework driver for Cirrus Logic CLPS711X.
159
160	  To compile this driver as a module, choose M here: the module
161	  will be called pwm-clps711x.
162
163config PWM_CRC
164	bool "Intel Crystalcove (CRC) PWM support"
165	depends on X86 && INTEL_SOC_PMIC
166	help
167	  Generic PWM framework driver for Crystalcove (CRC) PMIC based PWM
168	  control.
169
170config PWM_CROS_EC
171	tristate "ChromeOS EC PWM driver"
172	depends on CROS_EC
173	help
174	  PWM driver for exposing a PWM attached to the ChromeOS Embedded
175	  Controller.
176
177config PWM_DWC
178	tristate "DesignWare PWM Controller"
179	depends on PCI
180	help
181	  PWM driver for Synopsys DWC PWM Controller attached to a PCI bus.
182
183	  To compile this driver as a module, choose M here: the module
184	  will be called pwm-dwc.
185
186config PWM_EP93XX
187	tristate "Cirrus Logic EP93xx PWM support"
188	depends on ARCH_EP93XX || COMPILE_TEST
189	depends on HAS_IOMEM
190	help
191	  Generic PWM framework driver for Cirrus Logic EP93xx.
192
193	  To compile this driver as a module, choose M here: the module
194	  will be called pwm-ep93xx.
195
196config PWM_FSL_FTM
197	tristate "Freescale FlexTimer Module (FTM) PWM support"
198	depends on HAS_IOMEM
199	depends on OF
200	select REGMAP_MMIO
201	help
202	  Generic FTM PWM framework driver for Freescale VF610 and
203	  Layerscape LS-1 SoCs.
204
205	  To compile this driver as a module, choose M here: the module
206	  will be called pwm-fsl-ftm.
207
208config PWM_HIBVT
209	tristate "HiSilicon BVT PWM support"
210	depends on ARCH_HISI || COMPILE_TEST
211	depends on HAS_IOMEM
212	help
213	  Generic PWM framework driver for HiSilicon BVT SoCs.
214
215	  To compile this driver as a module, choose M here: the module
216	  will be called pwm-hibvt.
217
218config PWM_IMG
219	tristate "Imagination Technologies PWM driver"
220	depends on HAS_IOMEM
221	depends on MFD_SYSCON
222	depends on COMMON_CLK
223	depends on MIPS || COMPILE_TEST
224	help
225	  Generic PWM framework driver for Imagination Technologies
226	  PWM block which supports 4 channels.
227
228	  To compile this driver as a module, choose M here: the module
229	  will be called pwm-img
230
231config PWM_IMX1
232	tristate "i.MX1 PWM support"
233	depends on ARCH_MXC || COMPILE_TEST
234	depends on HAS_IOMEM
235	help
236	  Generic PWM framework driver for i.MX1 and i.MX21
237
238	  To compile this driver as a module, choose M here: the module
239	  will be called pwm-imx1.
240
241config PWM_IMX27
242	tristate "i.MX27 PWM support"
243	depends on ARCH_MXC || COMPILE_TEST
244	depends on HAS_IOMEM
245	help
246	  Generic PWM framework driver for i.MX27 and later i.MX SoCs.
247
248	  To compile this driver as a module, choose M here: the module
249	  will be called pwm-imx27.
250
251config PWM_IMX_TPM
252	tristate "i.MX TPM PWM support"
253	depends on ARCH_MXC || COMPILE_TEST
254	depends on HAVE_CLK && HAS_IOMEM
255	help
256	  Generic PWM framework driver for i.MX7ULP TPM module, TPM's full
257	  name is Low Power Timer/Pulse Width Modulation Module.
258
259	  To compile this driver as a module, choose M here: the module
260	  will be called pwm-imx-tpm.
261
262config PWM_INTEL_LGM
263	tristate "Intel LGM PWM support"
264	depends on HAS_IOMEM
265	depends on (OF && X86) || COMPILE_TEST
266	select REGMAP_MMIO
267	help
268	  Generic PWM fan controller driver for LGM SoC.
269
270	  To compile this driver as a module, choose M here: the module
271	  will be called pwm-intel-lgm.
272
273config PWM_IQS620A
274	tristate "Azoteq IQS620A PWM support"
275	depends on MFD_IQS62X || COMPILE_TEST
276	help
277	  Generic PWM framework driver for the Azoteq IQS620A multi-function
278	  sensor.
279
280	  To compile this driver as a module, choose M here: the module will
281	  be called pwm-iqs620a.
282
283config PWM_JZ4740
284	tristate "Ingenic JZ47xx PWM support"
285	depends on MIPS || COMPILE_TEST
286	depends on COMMON_CLK
287	select MFD_SYSCON
288	help
289	  Generic PWM framework driver for Ingenic JZ47xx based
290	  machines.
291
292	  To compile this driver as a module, choose M here: the module
293	  will be called pwm-jz4740.
294
295config PWM_KEEMBAY
296	tristate "Intel Keem Bay PWM driver"
297	depends on ARCH_KEEMBAY || COMPILE_TEST
298	depends on COMMON_CLK && HAS_IOMEM
299	help
300	  The platform driver for Intel Keem Bay PWM controller.
301
302	  To compile this driver as a module, choose M here: the module
303	  will be called pwm-keembay.
304
305config PWM_LP3943
306	tristate "TI/National Semiconductor LP3943 PWM support"
307	depends on MFD_LP3943
308	help
309	  Generic PWM framework driver for LP3943 which supports two PWM
310	  channels.
311
312	  To compile this driver as a module, choose M here: the module
313	  will be called pwm-lp3943.
314
315config PWM_LPC18XX_SCT
316	tristate "LPC18xx/43xx PWM/SCT support"
317	depends on ARCH_LPC18XX || COMPILE_TEST
318	depends on HAS_IOMEM
319	help
320	  Generic PWM framework driver for NXP LPC18xx PWM/SCT which
321	  supports 16 channels.
322	  A maximum of 15 channels can be requested simultaneously and
323	  must have the same period.
324
325	  To compile this driver as a module, choose M here: the module
326	  will be called pwm-lpc18xx-sct.
327
328config PWM_LPC32XX
329	tristate "LPC32XX PWM support"
330	depends on ARCH_LPC32XX || COMPILE_TEST
331	depends on HAS_IOMEM
332	help
333	  Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
334	  PWM controllers.
335
336	  To compile this driver as a module, choose M here: the module
337	  will be called pwm-lpc32xx.
338
339config PWM_LPSS
340	depends on HAS_IOMEM
341	tristate
342
343config PWM_LPSS_PCI
344	tristate "Intel LPSS PWM PCI driver"
345	depends on X86 || COMPILE_TEST
346	depends on HAS_IOMEM && PCI
347	select PWM_LPSS
348	help
349	  The PCI driver for Intel Low Power Subsystem PWM controller.
350
351	  To compile this driver as a module, choose M here: the module
352	  will be called pwm-lpss-pci.
353
354config PWM_LPSS_PLATFORM
355	tristate "Intel LPSS PWM platform driver"
356	depends on (X86 && ACPI) || COMPILE_TEST
357	depends on HAS_IOMEM
358	select PWM_LPSS
359	help
360	  The platform driver for Intel Low Power Subsystem PWM controller.
361
362	  To compile this driver as a module, choose M here: the module
363	  will be called pwm-lpss-platform.
364
365config PWM_MESON
366	tristate "Amlogic Meson PWM driver"
367	depends on ARCH_MESON || COMPILE_TEST
368	depends on COMMON_CLK && HAS_IOMEM
369	help
370	  The platform driver for Amlogic Meson PWM controller.
371
372	  To compile this driver as a module, choose M here: the module
373	  will be called pwm-meson.
374
375config PWM_MTK_DISP
376	tristate "MediaTek display PWM driver"
377	depends on ARCH_MEDIATEK || COMPILE_TEST
378	depends on HAS_IOMEM
379	help
380	  Generic PWM framework driver for MediaTek disp-pwm device.
381	  The PWM is used to control the backlight brightness for display.
382
383	  To compile this driver as a module, choose M here: the module
384	  will be called pwm-mtk-disp.
385
386config PWM_MEDIATEK
387	tristate "MediaTek PWM support"
388	depends on ARCH_MEDIATEK || RALINK || COMPILE_TEST
389	depends on HAS_IOMEM
390	help
391	  Generic PWM framework driver for Mediatek ARM SoC.
392
393	  To compile this driver as a module, choose M here: the module
394	  will be called pwm-mediatek.
395
396config PWM_MXS
397	tristate "Freescale MXS PWM support"
398	depends on ARCH_MXS || COMPILE_TEST
399	depends on HAS_IOMEM && OF
400	select STMP_DEVICE
401	help
402	  Generic PWM framework driver for Freescale MXS.
403
404	  To compile this driver as a module, choose M here: the module
405	  will be called pwm-mxs.
406
407config PWM_NTXEC
408	tristate "Netronix embedded controller PWM support"
409	depends on MFD_NTXEC
410	help
411	  Say yes here if you want to support the PWM output of the embedded
412	  controller found in certain e-book readers designed by the original
413	  design manufacturer Netronix.
414
415config PWM_OMAP_DMTIMER
416	tristate "OMAP Dual-Mode Timer PWM support"
417	depends on OF
418	depends on OMAP_DM_TIMER || COMPILE_TEST
419	help
420	  Generic PWM framework driver for OMAP Dual-Mode Timer PWM output
421
422	  To compile this driver as a module, choose M here: the module
423	  will be called pwm-omap-dmtimer
424
425config PWM_PCA9685
426	tristate "NXP PCA9685 PWM driver"
427	depends on I2C
428	select REGMAP_I2C
429	help
430	  Generic PWM framework driver for NXP PCA9685 LED controller.
431
432	  To compile this driver as a module, choose M here: the module
433	  will be called pwm-pca9685.
434
435config PWM_PXA
436	tristate "PXA PWM support"
437	depends on ARCH_PXA || COMPILE_TEST
438	depends on HAS_IOMEM
439	help
440	  Generic PWM framework driver for PXA.
441
442	  To compile this driver as a module, choose M here: the module
443	  will be called pwm-pxa.
444
445config PWM_RASPBERRYPI_POE
446	tristate "Raspberry Pi Firwmware PoE Hat PWM support"
447	# Make sure not 'y' when RASPBERRYPI_FIRMWARE is 'm'. This can only
448	# happen when COMPILE_TEST=y, hence the added !RASPBERRYPI_FIRMWARE.
449	depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
450	help
451	  Enable Raspberry Pi firmware controller PWM bus used to control the
452	  official RPI PoE hat
453
454config PWM_RCAR
455	tristate "Renesas R-Car PWM support"
456	depends on ARCH_RENESAS || COMPILE_TEST
457	depends on HAS_IOMEM
458	help
459	  This driver exposes the PWM Timer controller found in Renesas
460	  R-Car chips through the PWM API.
461
462	  To compile this driver as a module, choose M here: the module
463	  will be called pwm-rcar.
464
465config PWM_RENESAS_TPU
466	tristate "Renesas TPU PWM support"
467	depends on ARCH_RENESAS || COMPILE_TEST
468	depends on HAS_IOMEM
469	help
470	  This driver exposes the Timer Pulse Unit (TPU) PWM controller found
471	  in Renesas chips through the PWM API.
472
473	  To compile this driver as a module, choose M here: the module
474	  will be called pwm-renesas-tpu.
475
476config PWM_ROCKCHIP
477	tristate "Rockchip PWM support"
478	depends on ARCH_ROCKCHIP || COMPILE_TEST
479	depends on HAS_IOMEM
480	help
481	  Generic PWM framework driver for the PWM controller found on
482	  Rockchip SoCs.
483
484config PWM_SAMSUNG
485	tristate "Samsung PWM support"
486	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
487	depends on HAS_IOMEM
488	help
489	  Generic PWM framework driver for Samsung S3C24xx, S3C64xx, S5Pv210
490	  and Exynos SoCs.
491	  Choose Y here only if you build for such Samsung SoC.
492
493	  To compile this driver as a module, choose M here: the module
494	  will be called pwm-samsung.
495
496config PWM_SIFIVE
497	tristate "SiFive PWM support"
498	depends on OF
499	depends on COMMON_CLK && HAS_IOMEM
500	depends on RISCV || COMPILE_TEST
501	help
502	  Generic PWM framework driver for SiFive SoCs.
503
504	  To compile this driver as a module, choose M here: the module
505	  will be called pwm-sifive.
506
507config PWM_SL28CPLD
508	tristate "Kontron sl28cpld PWM support"
509	depends on MFD_SL28CPLD || COMPILE_TEST
510	help
511	  Generic PWM framework driver for board management controller
512	  found on the Kontron sl28 CPLD.
513
514	  To compile this driver as a module, choose M here: the module
515	  will be called pwm-sl28cpld.
516
517config PWM_SPEAR
518	tristate "STMicroelectronics SPEAr PWM support"
519	depends on PLAT_SPEAR || COMPILE_TEST
520	depends on HAS_IOMEM && OF
521	help
522	  Generic PWM framework driver for the PWM controller on ST
523	  SPEAr SoCs.
524
525	  To compile this driver as a module, choose M here: the module
526	  will be called pwm-spear.
527
528config PWM_SPRD
529	tristate "Spreadtrum PWM support"
530	depends on ARCH_SPRD || COMPILE_TEST
531	depends on HAS_IOMEM
532	help
533	  Generic PWM framework driver for the PWM controller on
534	  Spreadtrum SoCs.
535
536	  To compile this driver as a module, choose M here: the module
537	  will be called pwm-sprd.
538
539config PWM_STI
540	tristate "STiH4xx PWM support"
541	depends on ARCH_STI || COMPILE_TEST
542	depends on HAS_IOMEM && OF
543	help
544	  Generic PWM framework driver for STiH4xx SoCs.
545
546	  To compile this driver as a module, choose M here: the module
547	  will be called pwm-sti.
548
549config PWM_STM32
550	tristate "STMicroelectronics STM32 PWM"
551	depends on MFD_STM32_TIMERS || COMPILE_TEST
552	help
553	  Generic PWM framework driver for STM32 SoCs.
554
555	  To compile this driver as a module, choose M here: the module
556	  will be called pwm-stm32.
557
558config PWM_STM32_LP
559	tristate "STMicroelectronics STM32 PWM LP"
560	depends on MFD_STM32_LPTIMER || COMPILE_TEST
561	help
562	  Generic PWM framework driver for STMicroelectronics STM32 SoCs
563	  with Low-Power Timer (LPTIM).
564
565	  To compile this driver as a module, choose M here: the module
566	  will be called pwm-stm32-lp.
567
568config PWM_STMPE
569	bool "STMPE expander PWM export"
570	depends on MFD_STMPE
571	help
572	  This enables support for the PWMs found in the STMPE I/O
573	  expanders.
574
575config PWM_SUN4I
576	tristate "Allwinner PWM support"
577	depends on ARCH_SUNXI || COMPILE_TEST
578	depends on HAS_IOMEM && COMMON_CLK
579	help
580	  Generic PWM framework driver for Allwinner SoCs.
581
582	  To compile this driver as a module, choose M here: the module
583	  will be called pwm-sun4i.
584
585config PWM_SUNPLUS
586	tristate "Sunplus PWM support"
587	depends on ARCH_SUNPLUS || COMPILE_TEST
588	depends on HAS_IOMEM && OF
589	help
590	  Generic PWM framework driver for the PWM controller on
591	  Sunplus SoCs.
592
593	  To compile this driver as a module, choose M here: the module
594	  will be called pwm-sunplus.
595
596config PWM_TEGRA
597	tristate "NVIDIA Tegra PWM support"
598	depends on ARCH_TEGRA || COMPILE_TEST
599	depends on HAS_IOMEM
600	help
601	  Generic PWM framework driver for the PWFM controller found on NVIDIA
602	  Tegra SoCs.
603
604	  To compile this driver as a module, choose M here: the module
605	  will be called pwm-tegra.
606
607config PWM_TIECAP
608	tristate "ECAP PWM support"
609	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
610	depends on HAS_IOMEM
611	help
612	  PWM driver support for the ECAP APWM controller found on TI SOCs
613
614	  To compile this driver as a module, choose M here: the module
615	  will be called pwm-tiecap.
616
617config PWM_TIEHRPWM
618	tristate "EHRPWM PWM support"
619	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3 || COMPILE_TEST
620	depends on HAS_IOMEM
621	help
622	  PWM driver support for the EHRPWM controller found on TI SOCs
623
624	  To compile this driver as a module, choose M here: the module
625	  will be called pwm-tiehrpwm.
626
627config PWM_TWL
628	tristate "TWL4030/6030 PWM support"
629	depends on TWL4030_CORE
630	help
631	  Generic PWM framework driver for TWL4030/6030.
632
633	  To compile this driver as a module, choose M here: the module
634	  will be called pwm-twl.
635
636config PWM_TWL_LED
637	tristate "TWL4030/6030 PWM support for LED drivers"
638	depends on TWL4030_CORE
639	help
640	  Generic PWM framework driver for TWL4030/6030 LED terminals.
641
642	  To compile this driver as a module, choose M here: the module
643	  will be called pwm-twl-led.
644
645config PWM_VISCONTI
646	tristate "Toshiba Visconti PWM support"
647	depends on ARCH_VISCONTI || COMPILE_TEST
648	help
649	  PWM Subsystem driver support for Toshiba Visconti SoCs.
650
651	  To compile this driver as a module, choose M here: the module
652	  will be called pwm-visconti.
653
654config PWM_VT8500
655	tristate "vt8500 PWM support"
656	depends on ARCH_VT8500 || COMPILE_TEST
657	depends on HAS_IOMEM
658	help
659	  Generic PWM framework driver for vt8500.
660
661	  To compile this driver as a module, choose M here: the module
662	  will be called pwm-vt8500.
663
664config PWM_XILINX
665	tristate "Xilinx AXI Timer PWM support"
666	depends on OF_ADDRESS
667	depends on COMMON_CLK
668	select REGMAP_MMIO
669	help
670	  PWM driver for Xilinx LogiCORE IP AXI timers. This timer is
671	  typically a soft core which may be present in Xilinx FPGAs.
672	  This device may also be present in Microblaze soft processors.
673	  If you don't have this IP in your design, choose N.
674
675	  To compile this driver as a module, choose M here: the module
676	  will be called pwm-xilinx.
677
678endif
679