xref: /openbmc/linux/drivers/ptp/ptp_idt82p33.h (revision 35267cea)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * PTP hardware clock driver for the IDT 82P33XXX family of clocks.
4  *
5  * Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
6  */
7 #ifndef PTP_IDT82P33_H
8 #define PTP_IDT82P33_H
9 
10 #include <linux/ktime.h>
11 #include <linux/workqueue.h>
12 
13 
14 /* Register Map - AN888_SMUforIEEE_SynchEther_82P33xxx_RevH.pdf */
15 #define PAGE_NUM (8)
16 #define _ADDR(page, offset) (((page) << 0x7) | ((offset) & 0x7f))
17 #define _PAGE(addr) (((addr) >> 0x7) & 0x7)
18 #define _OFFSET(addr)  ((addr) & 0x7f)
19 
20 #define DPLL1_TOD_CNFG 0x134
21 #define DPLL2_TOD_CNFG 0x1B4
22 
23 #define DPLL1_TOD_STS 0x10B
24 #define DPLL2_TOD_STS 0x18B
25 
26 #define DPLL1_TOD_TRIGGER 0x115
27 #define DPLL2_TOD_TRIGGER 0x195
28 
29 #define DPLL1_OPERATING_MODE_CNFG 0x120
30 #define DPLL2_OPERATING_MODE_CNFG 0x1A0
31 
32 #define DPLL1_HOLDOVER_FREQ_CNFG 0x12C
33 #define DPLL2_HOLDOVER_FREQ_CNFG 0x1AC
34 
35 #define DPLL1_PHASE_OFFSET_CNFG 0x143
36 #define DPLL2_PHASE_OFFSET_CNFG 0x1C3
37 
38 #define DPLL1_SYNC_EDGE_CNFG 0X140
39 #define DPLL2_SYNC_EDGE_CNFG 0X1C0
40 
41 #define DPLL1_INPUT_MODE_CNFG 0X116
42 #define DPLL2_INPUT_MODE_CNFG 0X196
43 
44 #define OUT_MUX_CNFG(outn) _ADDR(0x6, (0xC * (outn)))
45 
46 #define PAGE_ADDR 0x7F
47 /* Register Map end */
48 
49 /* Register definitions - AN888_SMUforIEEE_SynchEther_82P33xxx_RevH.pdf*/
50 #define TOD_TRIGGER(wr_trig, rd_trig) ((wr_trig & 0xf) << 4 | (rd_trig & 0xf))
51 #define SYNC_TOD BIT(1)
52 #define PH_OFFSET_EN BIT(7)
53 #define SQUELCH_ENABLE BIT(5)
54 
55 /* Bit definitions for the DPLL_MODE register */
56 #define PLL_MODE_SHIFT                    (0)
57 #define PLL_MODE_MASK                     (0x1F)
58 
59 #define PEROUT_ENABLE_OUTPUT_MASK         (0xdeadbeef)
60 
61 enum pll_mode {
62 	PLL_MODE_MIN = 0,
63 	PLL_MODE_AUTOMATIC = PLL_MODE_MIN,
64 	PLL_MODE_FORCE_FREERUN = 1,
65 	PLL_MODE_FORCE_HOLDOVER = 2,
66 	PLL_MODE_FORCE_LOCKED = 4,
67 	PLL_MODE_FORCE_PRE_LOCKED2 = 5,
68 	PLL_MODE_FORCE_PRE_LOCKED = 6,
69 	PLL_MODE_FORCE_LOST_PHASE = 7,
70 	PLL_MODE_DCO = 10,
71 	PLL_MODE_WPH = 18,
72 	PLL_MODE_MAX = PLL_MODE_WPH,
73 };
74 
75 enum hw_tod_trig_sel {
76 	HW_TOD_TRIG_SEL_MIN = 0,
77 	HW_TOD_TRIG_SEL_NO_WRITE = HW_TOD_TRIG_SEL_MIN,
78 	HW_TOD_TRIG_SEL_SYNC_SEL = 1,
79 	HW_TOD_TRIG_SEL_IN12 = 2,
80 	HW_TOD_TRIG_SEL_IN13 = 3,
81 	HW_TOD_TRIG_SEL_IN14 = 4,
82 	HW_TOD_TRIG_SEL_TOD_PPS = 5,
83 	HW_TOD_TRIG_SEL_TIMER_INTERVAL = 6,
84 	HW_TOD_TRIG_SEL_MSB_PHASE_OFFSET_CNFG = 7,
85 	HW_TOD_TRIG_SEL_MSB_HOLDOVER_FREQ_CNFG = 8,
86 	HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG = 9,
87 	HW_TOD_RD_TRIG_SEL_LSB_TOD_STS = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
88 	WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
89 };
90 
91 /* Register bit definitions end */
92 #define FW_FILENAME	"idt82p33xxx.bin"
93 #define MAX_PHC_PLL (2)
94 #define TOD_BYTE_COUNT (10)
95 #define MAX_MEASURMENT_COUNT (5)
96 #define SNAP_THRESHOLD_NS (150000)
97 #define SYNC_TOD_TIMEOUT_SEC (5)
98 #define IDT82P33_MAX_WRITE_COUNT (512)
99 
100 #define PLLMASK_ADDR_HI	0xFF
101 #define PLLMASK_ADDR_LO	0xA5
102 
103 #define PLL0_OUTMASK_ADDR_HI	0xFF
104 #define PLL0_OUTMASK_ADDR_LO	0xB0
105 
106 #define PLL1_OUTMASK_ADDR_HI	0xFF
107 #define PLL1_OUTMASK_ADDR_LO	0xB2
108 
109 #define PLL2_OUTMASK_ADDR_HI	0xFF
110 #define PLL2_OUTMASK_ADDR_LO	0xB4
111 
112 #define PLL3_OUTMASK_ADDR_HI	0xFF
113 #define PLL3_OUTMASK_ADDR_LO	0xB6
114 
115 #define DEFAULT_PLL_MASK	(0x01)
116 #define DEFAULT_OUTPUT_MASK_PLL0	(0xc0)
117 #define DEFAULT_OUTPUT_MASK_PLL1	DEFAULT_OUTPUT_MASK_PLL0
118 
119 /* PTP Hardware Clock interface */
120 struct idt82p33_channel {
121 	struct ptp_clock_info	caps;
122 	struct ptp_clock	*ptp_clock;
123 	struct idt82p33	*idt82p33;
124 	enum pll_mode	pll_mode;
125 	/* task to turn off SYNC_TOD bit after pps sync */
126 	struct delayed_work	sync_tod_work;
127 	bool			sync_tod_on;
128 	s32			current_freq_ppb;
129 	u8			output_mask;
130 	u16			dpll_tod_cnfg;
131 	u16			dpll_tod_trigger;
132 	u16			dpll_tod_sts;
133 	u16			dpll_mode_cnfg;
134 	u16			dpll_freq_cnfg;
135 	u16			dpll_phase_cnfg;
136 	u16			dpll_sync_cnfg;
137 	u16			dpll_input_mode_cnfg;
138 };
139 
140 struct idt82p33 {
141 	struct idt82p33_channel channel[MAX_PHC_PLL];
142 	struct i2c_client	*client;
143 	u8	page_offset;
144 	u8	pll_mask;
145 	ktime_t start_time;
146 	int calculate_overhead_flag;
147 	s64 tod_write_overhead_ns;
148 	/* Protects I2C read/modify/write registers from concurrent access */
149 	struct mutex	reg_lock;
150 };
151 
152 /* firmware interface */
153 struct idt82p33_fwrc {
154 	u8 hiaddr;
155 	u8 loaddr;
156 	u8 value;
157 	u8 reserved;
158 } __packed;
159 
160 /**
161  * @brief Maximum absolute value for write phase offset in femtoseconds
162  */
163 #define WRITE_PHASE_OFFSET_LIMIT (20000052084ll)
164 
165 /** @brief Phase offset resolution
166  *
167  *  DPLL phase offset = 10^15 fs / ( System Clock  * 2^13)
168  *                    = 10^15 fs / ( 1638400000 * 2^23)
169  *                    = 74.5058059692382 fs
170  */
171 #define IDT_T0DPLL_PHASE_RESOL 74506
172 
173 
174 #endif /* PTP_IDT82P33_H */
175