1 /* 2 * Battery driver for CPCAP PMIC 3 * 4 * Copyright (C) 2017 Tony Lindgren <tony@atomide.com> 5 * 6 * Some parts of the code based on earlie Motorola mapphone Linux kernel 7 * drivers: 8 * 9 * Copyright (C) 2009-2010 Motorola, Inc. 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License version 2 as 13 * published by the Free Software Foundation. 14 15 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 16 * kind, whether express or implied; without even the implied warranty 17 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 */ 20 21 #include <linux/delay.h> 22 #include <linux/err.h> 23 #include <linux/interrupt.h> 24 #include <linux/kernel.h> 25 #include <linux/module.h> 26 #include <linux/of_device.h> 27 #include <linux/platform_device.h> 28 #include <linux/power_supply.h> 29 #include <linux/reboot.h> 30 #include <linux/regmap.h> 31 32 #include <linux/iio/consumer.h> 33 #include <linux/iio/types.h> 34 #include <linux/mfd/motorola-cpcap.h> 35 36 /* 37 * Register bit defines for CPCAP_REG_BPEOL. Some of these seem to 38 * map to MC13783UG.pdf "Table 5-19. Register 13, Power Control 0" 39 * to enable BATTDETEN, LOBAT and EOL features. We currently use 40 * LOBAT interrupts instead of EOL. 41 */ 42 #define CPCAP_REG_BPEOL_BIT_EOL9 BIT(9) /* Set for EOL irq */ 43 #define CPCAP_REG_BPEOL_BIT_EOL8 BIT(8) /* Set for EOL irq */ 44 #define CPCAP_REG_BPEOL_BIT_UNKNOWN7 BIT(7) 45 #define CPCAP_REG_BPEOL_BIT_UNKNOWN6 BIT(6) 46 #define CPCAP_REG_BPEOL_BIT_UNKNOWN5 BIT(5) 47 #define CPCAP_REG_BPEOL_BIT_EOL_MULTI BIT(4) /* Set for multiple EOL irqs */ 48 #define CPCAP_REG_BPEOL_BIT_UNKNOWN3 BIT(3) 49 #define CPCAP_REG_BPEOL_BIT_UNKNOWN2 BIT(2) 50 #define CPCAP_REG_BPEOL_BIT_BATTDETEN BIT(1) /* Enable battery detect */ 51 #define CPCAP_REG_BPEOL_BIT_EOLSEL BIT(0) /* BPDET = 0, EOL = 1 */ 52 53 /* 54 * Register bit defines for CPCAP_REG_CCC1. These seem similar to the twl6030 55 * coulomb counter registers rather than the mc13892 registers. Both twl6030 56 * and mc13892 set bits 2 and 1 to reset and clear registers. But mc13892 57 * sets bit 0 to start the coulomb counter while twl6030 sets bit 0 to stop 58 * the coulomb counter like cpcap does. So for now, we use the twl6030 style 59 * naming for the registers. 60 */ 61 #define CPCAP_REG_CCC1_ACTIVE_MODE1 BIT(4) /* Update rate */ 62 #define CPCAP_REG_CCC1_ACTIVE_MODE0 BIT(3) /* Update rate */ 63 #define CPCAP_REG_CCC1_AUTOCLEAR BIT(2) /* Resets sample registers */ 64 #define CPCAP_REG_CCC1_CAL_EN BIT(1) /* Clears after write in 1s */ 65 #define CPCAP_REG_CCC1_PAUSE BIT(0) /* Stop counters, allow write */ 66 #define CPCAP_REG_CCC1_RESET_MASK (CPCAP_REG_CCC1_AUTOCLEAR | \ 67 CPCAP_REG_CCC1_CAL_EN) 68 69 #define CPCAP_REG_CCCC2_RATE1 BIT(5) 70 #define CPCAP_REG_CCCC2_RATE0 BIT(4) 71 #define CPCAP_REG_CCCC2_ENABLE BIT(3) 72 73 #define CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS 250 74 75 enum { 76 CPCAP_BATTERY_IIO_BATTDET, 77 CPCAP_BATTERY_IIO_VOLTAGE, 78 CPCAP_BATTERY_IIO_CHRG_CURRENT, 79 CPCAP_BATTERY_IIO_BATT_CURRENT, 80 CPCAP_BATTERY_IIO_NR, 81 }; 82 83 enum cpcap_battery_irq_action { 84 CPCAP_BATTERY_IRQ_ACTION_NONE, 85 CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE, 86 CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW, 87 CPCAP_BATTERY_IRQ_ACTION_POWEROFF, 88 }; 89 90 struct cpcap_interrupt_desc { 91 const char *name; 92 struct list_head node; 93 int irq; 94 enum cpcap_battery_irq_action action; 95 }; 96 97 struct cpcap_battery_config { 98 int cd_factor; 99 struct power_supply_info info; 100 struct power_supply_battery_info bat; 101 }; 102 103 struct cpcap_coulomb_counter_data { 104 s32 sample; /* 24 or 32 bits */ 105 s32 accumulator; 106 s16 offset; /* 9 bits */ 107 s16 integrator; /* 13 or 16 bits */ 108 }; 109 110 enum cpcap_battery_state { 111 CPCAP_BATTERY_STATE_PREVIOUS, 112 CPCAP_BATTERY_STATE_LATEST, 113 CPCAP_BATTERY_STATE_NR, 114 }; 115 116 struct cpcap_battery_state_data { 117 int voltage; 118 int current_ua; 119 int counter_uah; 120 int temperature; 121 ktime_t time; 122 struct cpcap_coulomb_counter_data cc; 123 }; 124 125 struct cpcap_battery_ddata { 126 struct device *dev; 127 struct regmap *reg; 128 struct list_head irq_list; 129 struct iio_channel *channels[CPCAP_BATTERY_IIO_NR]; 130 struct power_supply *psy; 131 struct cpcap_battery_config config; 132 struct cpcap_battery_state_data state[CPCAP_BATTERY_STATE_NR]; 133 u32 cc_lsb; /* μAms per LSB */ 134 atomic_t active; 135 int status; 136 u16 vendor; 137 }; 138 139 #define CPCAP_NO_BATTERY -400 140 141 static struct cpcap_battery_state_data * 142 cpcap_battery_get_state(struct cpcap_battery_ddata *ddata, 143 enum cpcap_battery_state state) 144 { 145 if (state >= CPCAP_BATTERY_STATE_NR) 146 return NULL; 147 148 return &ddata->state[state]; 149 } 150 151 static struct cpcap_battery_state_data * 152 cpcap_battery_latest(struct cpcap_battery_ddata *ddata) 153 { 154 return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_LATEST); 155 } 156 157 static struct cpcap_battery_state_data * 158 cpcap_battery_previous(struct cpcap_battery_ddata *ddata) 159 { 160 return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_PREVIOUS); 161 } 162 163 static int cpcap_charger_battery_temperature(struct cpcap_battery_ddata *ddata, 164 int *value) 165 { 166 struct iio_channel *channel; 167 int error; 168 169 channel = ddata->channels[CPCAP_BATTERY_IIO_BATTDET]; 170 error = iio_read_channel_processed(channel, value); 171 if (error < 0) { 172 dev_warn(ddata->dev, "%s failed: %i\n", __func__, error); 173 *value = CPCAP_NO_BATTERY; 174 175 return error; 176 } 177 178 *value /= 100; 179 180 return 0; 181 } 182 183 static int cpcap_battery_get_voltage(struct cpcap_battery_ddata *ddata) 184 { 185 struct iio_channel *channel; 186 int error, value = 0; 187 188 channel = ddata->channels[CPCAP_BATTERY_IIO_VOLTAGE]; 189 error = iio_read_channel_processed(channel, &value); 190 if (error < 0) { 191 dev_warn(ddata->dev, "%s failed: %i\n", __func__, error); 192 193 return 0; 194 } 195 196 return value * 1000; 197 } 198 199 static int cpcap_battery_get_current(struct cpcap_battery_ddata *ddata) 200 { 201 struct iio_channel *channel; 202 int error, value = 0; 203 204 channel = ddata->channels[CPCAP_BATTERY_IIO_BATT_CURRENT]; 205 error = iio_read_channel_processed(channel, &value); 206 if (error < 0) { 207 dev_warn(ddata->dev, "%s failed: %i\n", __func__, error); 208 209 return 0; 210 } 211 212 return value * 1000; 213 } 214 215 /** 216 * cpcap_battery_cc_raw_div - calculate and divide coulomb counter μAms values 217 * @ddata: device driver data 218 * @sample: coulomb counter sample value 219 * @accumulator: coulomb counter integrator value 220 * @offset: coulomb counter offset value 221 * @divider: conversion divider 222 * 223 * Note that cc_lsb and cc_dur values are from Motorola Linux kernel 224 * function data_get_avg_curr_ua() and seem to be based on measured test 225 * results. It also has the following comment: 226 * 227 * Adjustment factors are applied here as a temp solution per the test 228 * results. Need to work out a formal solution for this adjustment. 229 * 230 * A coulomb counter for similar hardware seems to be documented in 231 * "TWL6030 Gas Gauging Basics (Rev. A)" swca095a.pdf in chapter 232 * "10 Calculating Accumulated Current". We however follow what the 233 * Motorola mapphone Linux kernel is doing as there may be either a 234 * TI or ST coulomb counter in the PMIC. 235 */ 236 static int cpcap_battery_cc_raw_div(struct cpcap_battery_ddata *ddata, 237 s32 sample, s32 accumulator, 238 s16 offset, u32 divider) 239 { 240 s64 acc; 241 242 if (!divider) 243 return 0; 244 245 acc = accumulator; 246 acc -= (s64)sample * offset; 247 acc *= ddata->cc_lsb; 248 acc *= -1; 249 acc = div_s64(acc, divider); 250 251 return acc; 252 } 253 254 /* 3600000μAms = 1μAh */ 255 static int cpcap_battery_cc_to_uah(struct cpcap_battery_ddata *ddata, 256 s32 sample, s32 accumulator, 257 s16 offset) 258 { 259 return cpcap_battery_cc_raw_div(ddata, sample, 260 accumulator, offset, 261 3600000); 262 } 263 264 static int cpcap_battery_cc_to_ua(struct cpcap_battery_ddata *ddata, 265 s32 sample, s32 accumulator, 266 s16 offset) 267 { 268 return cpcap_battery_cc_raw_div(ddata, sample, 269 accumulator, offset, 270 sample * 271 CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS); 272 } 273 274 /** 275 * cpcap_battery_read_accumulated - reads cpcap coulomb counter 276 * @ddata: device driver data 277 * @ccd: coulomb counter values 278 * 279 * Based on Motorola mapphone kernel function data_read_regs(). 280 * Looking at the registers, the coulomb counter seems similar to 281 * the coulomb counter in TWL6030. See "TWL6030 Gas Gauging Basics 282 * (Rev. A) swca095a.pdf for "10 Calculating Accumulated Current". 283 * 284 * Note that swca095a.pdf instructs to stop the coulomb counter 285 * before reading to avoid values changing. Motorola mapphone 286 * Linux kernel does not do it, so let's assume they've verified 287 * the data produced is correct. 288 */ 289 static int 290 cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata, 291 struct cpcap_coulomb_counter_data *ccd) 292 { 293 u16 buf[7]; /* CPCAP_REG_CCS1 to CCI */ 294 int error; 295 296 ccd->sample = 0; 297 ccd->accumulator = 0; 298 ccd->offset = 0; 299 ccd->integrator = 0; 300 301 /* Read coulomb counter register range */ 302 error = regmap_bulk_read(ddata->reg, CPCAP_REG_CCS1, 303 buf, ARRAY_SIZE(buf)); 304 if (error) 305 return 0; 306 307 /* Sample value CPCAP_REG_CCS1 & 2 */ 308 ccd->sample = (buf[1] & 0x0fff) << 16; 309 ccd->sample |= buf[0]; 310 if (ddata->vendor == CPCAP_VENDOR_TI) 311 ccd->sample = sign_extend32(24, ccd->sample); 312 313 /* Accumulator value CPCAP_REG_CCA1 & 2 */ 314 ccd->accumulator = ((s16)buf[3]) << 16; 315 ccd->accumulator |= buf[2]; 316 317 /* 318 * Coulomb counter calibration offset is CPCAP_REG_CCM, 319 * REG_CCO seems unused 320 */ 321 ccd->offset = buf[4]; 322 ccd->offset = sign_extend32(ccd->offset, 9); 323 324 /* Integrator register CPCAP_REG_CCI */ 325 if (ddata->vendor == CPCAP_VENDOR_TI) 326 ccd->integrator = sign_extend32(buf[6], 13); 327 else 328 ccd->integrator = (s16)buf[6]; 329 330 return cpcap_battery_cc_to_uah(ddata, 331 ccd->sample, 332 ccd->accumulator, 333 ccd->offset); 334 } 335 336 /** 337 * cpcap_battery_cc_get_avg_current - read cpcap coulumb counter 338 * @ddata: cpcap battery driver device data 339 */ 340 static int cpcap_battery_cc_get_avg_current(struct cpcap_battery_ddata *ddata) 341 { 342 int value, acc, error; 343 s32 sample; 344 s16 offset; 345 346 /* Coulomb counter integrator */ 347 error = regmap_read(ddata->reg, CPCAP_REG_CCI, &value); 348 if (error) 349 return error; 350 351 if (ddata->vendor == CPCAP_VENDOR_TI) { 352 acc = sign_extend32(value, 13); 353 sample = 1; 354 } else { 355 acc = (s16)value; 356 sample = 4; 357 } 358 359 /* Coulomb counter calibration offset */ 360 error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value); 361 if (error) 362 return error; 363 364 offset = sign_extend32(value, 9); 365 366 return cpcap_battery_cc_to_ua(ddata, sample, acc, offset); 367 } 368 369 static bool cpcap_battery_full(struct cpcap_battery_ddata *ddata) 370 { 371 struct cpcap_battery_state_data *state = cpcap_battery_latest(ddata); 372 373 if (state->voltage >= 374 (ddata->config.bat.constant_charge_voltage_max_uv - 18000)) 375 return true; 376 377 return false; 378 } 379 380 static int cpcap_battery_update_status(struct cpcap_battery_ddata *ddata) 381 { 382 struct cpcap_battery_state_data state, *latest, *previous; 383 ktime_t now; 384 int error; 385 386 memset(&state, 0, sizeof(state)); 387 now = ktime_get(); 388 389 latest = cpcap_battery_latest(ddata); 390 if (latest) { 391 s64 delta_ms = ktime_to_ms(ktime_sub(now, latest->time)); 392 393 if (delta_ms < CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS) 394 return delta_ms; 395 } 396 397 state.time = now; 398 state.voltage = cpcap_battery_get_voltage(ddata); 399 state.current_ua = cpcap_battery_get_current(ddata); 400 state.counter_uah = cpcap_battery_read_accumulated(ddata, &state.cc); 401 402 error = cpcap_charger_battery_temperature(ddata, 403 &state.temperature); 404 if (error) 405 return error; 406 407 previous = cpcap_battery_previous(ddata); 408 memcpy(previous, latest, sizeof(*previous)); 409 memcpy(latest, &state, sizeof(*latest)); 410 411 return 0; 412 } 413 414 static enum power_supply_property cpcap_battery_props[] = { 415 POWER_SUPPLY_PROP_STATUS, 416 POWER_SUPPLY_PROP_PRESENT, 417 POWER_SUPPLY_PROP_TECHNOLOGY, 418 POWER_SUPPLY_PROP_VOLTAGE_NOW, 419 POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 420 POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, 421 POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, 422 POWER_SUPPLY_PROP_CURRENT_AVG, 423 POWER_SUPPLY_PROP_CURRENT_NOW, 424 POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 425 POWER_SUPPLY_PROP_CHARGE_COUNTER, 426 POWER_SUPPLY_PROP_POWER_NOW, 427 POWER_SUPPLY_PROP_POWER_AVG, 428 POWER_SUPPLY_PROP_CAPACITY_LEVEL, 429 POWER_SUPPLY_PROP_SCOPE, 430 POWER_SUPPLY_PROP_TEMP, 431 }; 432 433 static int cpcap_battery_get_property(struct power_supply *psy, 434 enum power_supply_property psp, 435 union power_supply_propval *val) 436 { 437 struct cpcap_battery_ddata *ddata = power_supply_get_drvdata(psy); 438 struct cpcap_battery_state_data *latest, *previous; 439 u32 sample; 440 s32 accumulator; 441 int cached; 442 s64 tmp; 443 444 cached = cpcap_battery_update_status(ddata); 445 if (cached < 0) 446 return cached; 447 448 latest = cpcap_battery_latest(ddata); 449 previous = cpcap_battery_previous(ddata); 450 451 switch (psp) { 452 case POWER_SUPPLY_PROP_PRESENT: 453 if (latest->temperature > CPCAP_NO_BATTERY) 454 val->intval = 1; 455 else 456 val->intval = 0; 457 break; 458 case POWER_SUPPLY_PROP_STATUS: 459 if (cpcap_battery_full(ddata)) { 460 val->intval = POWER_SUPPLY_STATUS_FULL; 461 break; 462 } 463 if (cpcap_battery_cc_get_avg_current(ddata) < 0) 464 val->intval = POWER_SUPPLY_STATUS_CHARGING; 465 else 466 val->intval = POWER_SUPPLY_STATUS_DISCHARGING; 467 break; 468 case POWER_SUPPLY_PROP_TECHNOLOGY: 469 val->intval = ddata->config.info.technology; 470 break; 471 case POWER_SUPPLY_PROP_VOLTAGE_NOW: 472 val->intval = cpcap_battery_get_voltage(ddata); 473 break; 474 case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: 475 val->intval = ddata->config.info.voltage_max_design; 476 break; 477 case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: 478 val->intval = ddata->config.info.voltage_min_design; 479 break; 480 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: 481 val->intval = ddata->config.bat.constant_charge_voltage_max_uv; 482 break; 483 case POWER_SUPPLY_PROP_CURRENT_AVG: 484 sample = latest->cc.sample - previous->cc.sample; 485 if (!sample) { 486 val->intval = cpcap_battery_cc_get_avg_current(ddata); 487 break; 488 } 489 accumulator = latest->cc.accumulator - previous->cc.accumulator; 490 val->intval = cpcap_battery_cc_to_ua(ddata, sample, 491 accumulator, 492 latest->cc.offset); 493 break; 494 case POWER_SUPPLY_PROP_CURRENT_NOW: 495 val->intval = latest->current_ua; 496 break; 497 case POWER_SUPPLY_PROP_CHARGE_COUNTER: 498 val->intval = latest->counter_uah; 499 break; 500 case POWER_SUPPLY_PROP_POWER_NOW: 501 tmp = (latest->voltage / 10000) * latest->current_ua; 502 val->intval = div64_s64(tmp, 100); 503 break; 504 case POWER_SUPPLY_PROP_POWER_AVG: 505 sample = latest->cc.sample - previous->cc.sample; 506 if (!sample) { 507 tmp = cpcap_battery_cc_get_avg_current(ddata); 508 tmp *= (latest->voltage / 10000); 509 val->intval = div64_s64(tmp, 100); 510 break; 511 } 512 accumulator = latest->cc.accumulator - previous->cc.accumulator; 513 tmp = cpcap_battery_cc_to_ua(ddata, sample, accumulator, 514 latest->cc.offset); 515 tmp *= ((latest->voltage + previous->voltage) / 20000); 516 val->intval = div64_s64(tmp, 100); 517 break; 518 case POWER_SUPPLY_PROP_CAPACITY_LEVEL: 519 if (cpcap_battery_full(ddata)) 520 val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL; 521 else if (latest->voltage >= 3750000) 522 val->intval = POWER_SUPPLY_CAPACITY_LEVEL_HIGH; 523 else if (latest->voltage >= 3300000) 524 val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; 525 else if (latest->voltage > 3100000) 526 val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW; 527 else if (latest->voltage <= 3100000) 528 val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; 529 else 530 val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN; 531 break; 532 case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: 533 val->intval = ddata->config.info.charge_full_design; 534 break; 535 case POWER_SUPPLY_PROP_SCOPE: 536 val->intval = POWER_SUPPLY_SCOPE_SYSTEM; 537 break; 538 case POWER_SUPPLY_PROP_TEMP: 539 val->intval = latest->temperature; 540 break; 541 default: 542 return -EINVAL; 543 } 544 545 return 0; 546 } 547 548 static int cpcap_battery_update_charger(struct cpcap_battery_ddata *ddata, 549 int const_charge_voltage) 550 { 551 union power_supply_propval prop; 552 union power_supply_propval val; 553 struct power_supply *charger; 554 int error; 555 556 charger = power_supply_get_by_name("usb"); 557 if (!charger) 558 return -ENODEV; 559 560 error = power_supply_get_property(charger, 561 POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, 562 &prop); 563 if (error) 564 return error; 565 566 /* Allow charger const voltage lower than battery const voltage */ 567 if (const_charge_voltage > prop.intval) 568 return 0; 569 570 val.intval = const_charge_voltage; 571 572 return power_supply_set_property(charger, 573 POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, 574 &val); 575 } 576 577 static int cpcap_battery_set_property(struct power_supply *psy, 578 enum power_supply_property psp, 579 const union power_supply_propval *val) 580 { 581 struct cpcap_battery_ddata *ddata = power_supply_get_drvdata(psy); 582 583 switch (psp) { 584 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: 585 if (val->intval < ddata->config.info.voltage_min_design) 586 return -EINVAL; 587 if (val->intval > ddata->config.info.voltage_max_design) 588 return -EINVAL; 589 590 ddata->config.bat.constant_charge_voltage_max_uv = val->intval; 591 592 return cpcap_battery_update_charger(ddata, val->intval); 593 default: 594 return -EINVAL; 595 } 596 597 return 0; 598 } 599 600 static int cpcap_battery_property_is_writeable(struct power_supply *psy, 601 enum power_supply_property psp) 602 { 603 switch (psp) { 604 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: 605 return 1; 606 default: 607 return 0; 608 } 609 } 610 611 static irqreturn_t cpcap_battery_irq_thread(int irq, void *data) 612 { 613 struct cpcap_battery_ddata *ddata = data; 614 struct cpcap_battery_state_data *latest; 615 struct cpcap_interrupt_desc *d; 616 617 if (!atomic_read(&ddata->active)) 618 return IRQ_NONE; 619 620 list_for_each_entry(d, &ddata->irq_list, node) { 621 if (irq == d->irq) 622 break; 623 } 624 625 if (!d) 626 return IRQ_NONE; 627 628 latest = cpcap_battery_latest(ddata); 629 630 switch (d->action) { 631 case CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE: 632 dev_info(ddata->dev, "Coulomb counter calibration done\n"); 633 break; 634 case CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW: 635 if (latest->current_ua >= 0) 636 dev_warn(ddata->dev, "Battery low at %imV!\n", 637 latest->voltage / 1000); 638 break; 639 case CPCAP_BATTERY_IRQ_ACTION_POWEROFF: 640 if (latest->current_ua >= 0 && latest->voltage <= 3200000) { 641 dev_emerg(ddata->dev, 642 "Battery empty at %imV, powering off\n", 643 latest->voltage / 1000); 644 orderly_poweroff(true); 645 } 646 break; 647 default: 648 break; 649 } 650 651 power_supply_changed(ddata->psy); 652 653 return IRQ_HANDLED; 654 } 655 656 static int cpcap_battery_init_irq(struct platform_device *pdev, 657 struct cpcap_battery_ddata *ddata, 658 const char *name) 659 { 660 struct cpcap_interrupt_desc *d; 661 int irq, error; 662 663 irq = platform_get_irq_byname(pdev, name); 664 if (irq < 0) 665 return irq; 666 667 error = devm_request_threaded_irq(ddata->dev, irq, NULL, 668 cpcap_battery_irq_thread, 669 IRQF_SHARED, 670 name, ddata); 671 if (error) { 672 dev_err(ddata->dev, "could not get irq %s: %i\n", 673 name, error); 674 675 return error; 676 } 677 678 d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL); 679 if (!d) 680 return -ENOMEM; 681 682 d->name = name; 683 d->irq = irq; 684 685 if (!strncmp(name, "cccal", 5)) 686 d->action = CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE; 687 else if (!strncmp(name, "lowbph", 6)) 688 d->action = CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW; 689 else if (!strncmp(name, "lowbpl", 6)) 690 d->action = CPCAP_BATTERY_IRQ_ACTION_POWEROFF; 691 692 list_add(&d->node, &ddata->irq_list); 693 694 return 0; 695 } 696 697 static int cpcap_battery_init_interrupts(struct platform_device *pdev, 698 struct cpcap_battery_ddata *ddata) 699 { 700 static const char * const cpcap_battery_irqs[] = { 701 "eol", "lowbph", "lowbpl", 702 "chrgcurr1", "battdetb" 703 }; 704 int i, error; 705 706 for (i = 0; i < ARRAY_SIZE(cpcap_battery_irqs); i++) { 707 error = cpcap_battery_init_irq(pdev, ddata, 708 cpcap_battery_irqs[i]); 709 if (error) 710 return error; 711 } 712 713 /* Enable calibration interrupt if already available in dts */ 714 cpcap_battery_init_irq(pdev, ddata, "cccal"); 715 716 /* Enable low battery interrupts for 3.3V high and 3.1V low */ 717 error = regmap_update_bits(ddata->reg, CPCAP_REG_BPEOL, 718 0xffff, 719 CPCAP_REG_BPEOL_BIT_BATTDETEN); 720 if (error) 721 return error; 722 723 return 0; 724 } 725 726 static int cpcap_battery_init_iio(struct cpcap_battery_ddata *ddata) 727 { 728 const char * const names[CPCAP_BATTERY_IIO_NR] = { 729 "battdetb", "battp", "chg_isense", "batti", 730 }; 731 int error, i; 732 733 for (i = 0; i < CPCAP_BATTERY_IIO_NR; i++) { 734 ddata->channels[i] = devm_iio_channel_get(ddata->dev, 735 names[i]); 736 if (IS_ERR(ddata->channels[i])) { 737 error = PTR_ERR(ddata->channels[i]); 738 goto out_err; 739 } 740 741 if (!ddata->channels[i]->indio_dev) { 742 error = -ENXIO; 743 goto out_err; 744 } 745 } 746 747 return 0; 748 749 out_err: 750 if (error != -EPROBE_DEFER) 751 dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n", 752 error); 753 754 return error; 755 } 756 757 /* Calibrate coulomb counter */ 758 static int cpcap_battery_calibrate(struct cpcap_battery_ddata *ddata) 759 { 760 int error, ccc1, value; 761 unsigned long timeout; 762 763 error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &ccc1); 764 if (error) 765 return error; 766 767 timeout = jiffies + msecs_to_jiffies(6000); 768 769 /* Start calibration */ 770 error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1, 771 0xffff, 772 CPCAP_REG_CCC1_CAL_EN); 773 if (error) 774 goto restore; 775 776 while (time_before(jiffies, timeout)) { 777 error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &value); 778 if (error) 779 goto restore; 780 781 if (!(value & CPCAP_REG_CCC1_CAL_EN)) 782 break; 783 784 error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value); 785 if (error) 786 goto restore; 787 788 msleep(300); 789 } 790 791 /* Read calibration offset from CCM */ 792 error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value); 793 if (error) 794 goto restore; 795 796 dev_info(ddata->dev, "calibration done: 0x%04x\n", value); 797 798 restore: 799 if (error) 800 dev_err(ddata->dev, "%s: error %i\n", __func__, error); 801 802 error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1, 803 0xffff, ccc1); 804 if (error) 805 dev_err(ddata->dev, "%s: restore error %i\n", 806 __func__, error); 807 808 return error; 809 } 810 811 /* 812 * Based on the values from Motorola mapphone Linux kernel. In the 813 * the Motorola mapphone Linux kernel tree the value for pm_cd_factor 814 * is passed to the kernel via device tree. If it turns out to be 815 * something device specific we can consider that too later. 816 * 817 * And looking at the battery full and shutdown values for the stock 818 * kernel on droid 4, full is 4351000 and software initiates shutdown 819 * at 3078000. The device will die around 2743000. 820 */ 821 static const struct cpcap_battery_config cpcap_battery_default_data = { 822 .cd_factor = 0x3cc, 823 .info.technology = POWER_SUPPLY_TECHNOLOGY_LION, 824 .info.voltage_max_design = 4351000, 825 .info.voltage_min_design = 3100000, 826 .info.charge_full_design = 1740000, 827 .bat.constant_charge_voltage_max_uv = 4200000, 828 }; 829 830 #ifdef CONFIG_OF 831 static const struct of_device_id cpcap_battery_id_table[] = { 832 { 833 .compatible = "motorola,cpcap-battery", 834 .data = &cpcap_battery_default_data, 835 }, 836 {}, 837 }; 838 MODULE_DEVICE_TABLE(of, cpcap_battery_id_table); 839 #endif 840 841 static int cpcap_battery_probe(struct platform_device *pdev) 842 { 843 struct power_supply_desc *psy_desc; 844 struct cpcap_battery_ddata *ddata; 845 const struct of_device_id *match; 846 struct power_supply_config psy_cfg = {}; 847 int error; 848 849 match = of_match_device(of_match_ptr(cpcap_battery_id_table), 850 &pdev->dev); 851 if (!match) 852 return -EINVAL; 853 854 if (!match->data) { 855 dev_err(&pdev->dev, "no configuration data found\n"); 856 857 return -ENODEV; 858 } 859 860 ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); 861 if (!ddata) 862 return -ENOMEM; 863 864 INIT_LIST_HEAD(&ddata->irq_list); 865 ddata->dev = &pdev->dev; 866 memcpy(&ddata->config, match->data, sizeof(ddata->config)); 867 868 ddata->reg = dev_get_regmap(ddata->dev->parent, NULL); 869 if (!ddata->reg) 870 return -ENODEV; 871 872 error = cpcap_get_vendor(ddata->dev, ddata->reg, &ddata->vendor); 873 if (error) 874 return error; 875 876 switch (ddata->vendor) { 877 case CPCAP_VENDOR_ST: 878 ddata->cc_lsb = 95374; /* μAms per LSB */ 879 break; 880 case CPCAP_VENDOR_TI: 881 ddata->cc_lsb = 91501; /* μAms per LSB */ 882 break; 883 default: 884 return -EINVAL; 885 } 886 ddata->cc_lsb = (ddata->cc_lsb * ddata->config.cd_factor) / 1000; 887 888 platform_set_drvdata(pdev, ddata); 889 890 error = cpcap_battery_init_interrupts(pdev, ddata); 891 if (error) 892 return error; 893 894 error = cpcap_battery_init_iio(ddata); 895 if (error) 896 return error; 897 898 psy_desc = devm_kzalloc(ddata->dev, sizeof(*psy_desc), GFP_KERNEL); 899 if (!psy_desc) 900 return -ENOMEM; 901 902 psy_desc->name = "battery"; 903 psy_desc->type = POWER_SUPPLY_TYPE_BATTERY; 904 psy_desc->properties = cpcap_battery_props; 905 psy_desc->num_properties = ARRAY_SIZE(cpcap_battery_props); 906 psy_desc->get_property = cpcap_battery_get_property; 907 psy_desc->set_property = cpcap_battery_set_property; 908 psy_desc->property_is_writeable = cpcap_battery_property_is_writeable; 909 910 psy_cfg.of_node = pdev->dev.of_node; 911 psy_cfg.drv_data = ddata; 912 913 ddata->psy = devm_power_supply_register(ddata->dev, psy_desc, 914 &psy_cfg); 915 error = PTR_ERR_OR_ZERO(ddata->psy); 916 if (error) { 917 dev_err(ddata->dev, "failed to register power supply\n"); 918 return error; 919 } 920 921 atomic_set(&ddata->active, 1); 922 923 error = cpcap_battery_calibrate(ddata); 924 if (error) 925 return error; 926 927 return 0; 928 } 929 930 static int cpcap_battery_remove(struct platform_device *pdev) 931 { 932 struct cpcap_battery_ddata *ddata = platform_get_drvdata(pdev); 933 int error; 934 935 atomic_set(&ddata->active, 0); 936 error = regmap_update_bits(ddata->reg, CPCAP_REG_BPEOL, 937 0xffff, 0); 938 if (error) 939 dev_err(&pdev->dev, "could not disable: %i\n", error); 940 941 return 0; 942 } 943 944 static struct platform_driver cpcap_battery_driver = { 945 .driver = { 946 .name = "cpcap_battery", 947 .of_match_table = of_match_ptr(cpcap_battery_id_table), 948 }, 949 .probe = cpcap_battery_probe, 950 .remove = cpcap_battery_remove, 951 }; 952 module_platform_driver(cpcap_battery_driver); 953 954 MODULE_LICENSE("GPL v2"); 955 MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); 956 MODULE_DESCRIPTION("CPCAP PMIC Battery Driver"); 957