1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Driver for the TI bq24190 battery charger. 4 * 5 * Author: Mark A. Greer <mgreer@animalcreek.com> 6 */ 7 8 #include <linux/mod_devicetable.h> 9 #include <linux/module.h> 10 #include <linux/interrupt.h> 11 #include <linux/delay.h> 12 #include <linux/pm_runtime.h> 13 #include <linux/power_supply.h> 14 #include <linux/power/bq24190_charger.h> 15 #include <linux/regulator/driver.h> 16 #include <linux/regulator/machine.h> 17 #include <linux/workqueue.h> 18 #include <linux/i2c.h> 19 #include <linux/extcon-provider.h> 20 21 #define BQ24190_MANUFACTURER "Texas Instruments" 22 23 #define BQ24190_REG_ISC 0x00 /* Input Source Control */ 24 #define BQ24190_REG_ISC_EN_HIZ_MASK BIT(7) 25 #define BQ24190_REG_ISC_EN_HIZ_SHIFT 7 26 #define BQ24190_REG_ISC_VINDPM_MASK (BIT(6) | BIT(5) | BIT(4) | \ 27 BIT(3)) 28 #define BQ24190_REG_ISC_VINDPM_SHIFT 3 29 #define BQ24190_REG_ISC_IINLIM_MASK (BIT(2) | BIT(1) | BIT(0)) 30 #define BQ24190_REG_ISC_IINLIM_SHIFT 0 31 32 #define BQ24190_REG_POC 0x01 /* Power-On Configuration */ 33 #define BQ24190_REG_POC_RESET_MASK BIT(7) 34 #define BQ24190_REG_POC_RESET_SHIFT 7 35 #define BQ24190_REG_POC_WDT_RESET_MASK BIT(6) 36 #define BQ24190_REG_POC_WDT_RESET_SHIFT 6 37 #define BQ24190_REG_POC_CHG_CONFIG_MASK (BIT(5) | BIT(4)) 38 #define BQ24190_REG_POC_CHG_CONFIG_SHIFT 4 39 #define BQ24190_REG_POC_CHG_CONFIG_DISABLE 0x0 40 #define BQ24190_REG_POC_CHG_CONFIG_CHARGE 0x1 41 #define BQ24190_REG_POC_CHG_CONFIG_OTG 0x2 42 #define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT 0x3 43 #define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1)) 44 #define BQ24190_REG_POC_SYS_MIN_SHIFT 1 45 #define BQ24190_REG_POC_SYS_MIN_MIN 3000 46 #define BQ24190_REG_POC_SYS_MIN_MAX 3700 47 #define BQ24190_REG_POC_BOOST_LIM_MASK BIT(0) 48 #define BQ24190_REG_POC_BOOST_LIM_SHIFT 0 49 50 #define BQ24190_REG_CCC 0x02 /* Charge Current Control */ 51 #define BQ24190_REG_CCC_ICHG_MASK (BIT(7) | BIT(6) | BIT(5) | \ 52 BIT(4) | BIT(3) | BIT(2)) 53 #define BQ24190_REG_CCC_ICHG_SHIFT 2 54 #define BQ24190_REG_CCC_FORCE_20PCT_MASK BIT(0) 55 #define BQ24190_REG_CCC_FORCE_20PCT_SHIFT 0 56 57 #define BQ24190_REG_PCTCC 0x03 /* Pre-charge/Termination Current Cntl */ 58 #define BQ24190_REG_PCTCC_IPRECHG_MASK (BIT(7) | BIT(6) | BIT(5) | \ 59 BIT(4)) 60 #define BQ24190_REG_PCTCC_IPRECHG_SHIFT 4 61 #define BQ24190_REG_PCTCC_IPRECHG_MIN 128 62 #define BQ24190_REG_PCTCC_IPRECHG_MAX 2048 63 #define BQ24190_REG_PCTCC_ITERM_MASK (BIT(3) | BIT(2) | BIT(1) | \ 64 BIT(0)) 65 #define BQ24190_REG_PCTCC_ITERM_SHIFT 0 66 #define BQ24190_REG_PCTCC_ITERM_MIN 128 67 #define BQ24190_REG_PCTCC_ITERM_MAX 2048 68 69 #define BQ24190_REG_CVC 0x04 /* Charge Voltage Control */ 70 #define BQ24190_REG_CVC_VREG_MASK (BIT(7) | BIT(6) | BIT(5) | \ 71 BIT(4) | BIT(3) | BIT(2)) 72 #define BQ24190_REG_CVC_VREG_SHIFT 2 73 #define BQ24190_REG_CVC_BATLOWV_MASK BIT(1) 74 #define BQ24190_REG_CVC_BATLOWV_SHIFT 1 75 #define BQ24190_REG_CVC_VRECHG_MASK BIT(0) 76 #define BQ24190_REG_CVC_VRECHG_SHIFT 0 77 78 #define BQ24190_REG_CTTC 0x05 /* Charge Term/Timer Control */ 79 #define BQ24190_REG_CTTC_EN_TERM_MASK BIT(7) 80 #define BQ24190_REG_CTTC_EN_TERM_SHIFT 7 81 #define BQ24190_REG_CTTC_TERM_STAT_MASK BIT(6) 82 #define BQ24190_REG_CTTC_TERM_STAT_SHIFT 6 83 #define BQ24190_REG_CTTC_WATCHDOG_MASK (BIT(5) | BIT(4)) 84 #define BQ24190_REG_CTTC_WATCHDOG_SHIFT 4 85 #define BQ24190_REG_CTTC_EN_TIMER_MASK BIT(3) 86 #define BQ24190_REG_CTTC_EN_TIMER_SHIFT 3 87 #define BQ24190_REG_CTTC_CHG_TIMER_MASK (BIT(2) | BIT(1)) 88 #define BQ24190_REG_CTTC_CHG_TIMER_SHIFT 1 89 #define BQ24190_REG_CTTC_JEITA_ISET_MASK BIT(0) 90 #define BQ24190_REG_CTTC_JEITA_ISET_SHIFT 0 91 92 #define BQ24190_REG_ICTRC 0x06 /* IR Comp/Thermal Regulation Control */ 93 #define BQ24190_REG_ICTRC_BAT_COMP_MASK (BIT(7) | BIT(6) | BIT(5)) 94 #define BQ24190_REG_ICTRC_BAT_COMP_SHIFT 5 95 #define BQ24190_REG_ICTRC_VCLAMP_MASK (BIT(4) | BIT(3) | BIT(2)) 96 #define BQ24190_REG_ICTRC_VCLAMP_SHIFT 2 97 #define BQ24190_REG_ICTRC_TREG_MASK (BIT(1) | BIT(0)) 98 #define BQ24190_REG_ICTRC_TREG_SHIFT 0 99 100 #define BQ24190_REG_MOC 0x07 /* Misc. Operation Control */ 101 #define BQ24190_REG_MOC_DPDM_EN_MASK BIT(7) 102 #define BQ24190_REG_MOC_DPDM_EN_SHIFT 7 103 #define BQ24190_REG_MOC_TMR2X_EN_MASK BIT(6) 104 #define BQ24190_REG_MOC_TMR2X_EN_SHIFT 6 105 #define BQ24190_REG_MOC_BATFET_DISABLE_MASK BIT(5) 106 #define BQ24190_REG_MOC_BATFET_DISABLE_SHIFT 5 107 #define BQ24190_REG_MOC_JEITA_VSET_MASK BIT(4) 108 #define BQ24190_REG_MOC_JEITA_VSET_SHIFT 4 109 #define BQ24190_REG_MOC_INT_MASK_MASK (BIT(1) | BIT(0)) 110 #define BQ24190_REG_MOC_INT_MASK_SHIFT 0 111 112 #define BQ24190_REG_SS 0x08 /* System Status */ 113 #define BQ24190_REG_SS_VBUS_STAT_MASK (BIT(7) | BIT(6)) 114 #define BQ24190_REG_SS_VBUS_STAT_SHIFT 6 115 #define BQ24190_REG_SS_CHRG_STAT_MASK (BIT(5) | BIT(4)) 116 #define BQ24190_REG_SS_CHRG_STAT_SHIFT 4 117 #define BQ24190_REG_SS_DPM_STAT_MASK BIT(3) 118 #define BQ24190_REG_SS_DPM_STAT_SHIFT 3 119 #define BQ24190_REG_SS_PG_STAT_MASK BIT(2) 120 #define BQ24190_REG_SS_PG_STAT_SHIFT 2 121 #define BQ24190_REG_SS_THERM_STAT_MASK BIT(1) 122 #define BQ24190_REG_SS_THERM_STAT_SHIFT 1 123 #define BQ24190_REG_SS_VSYS_STAT_MASK BIT(0) 124 #define BQ24190_REG_SS_VSYS_STAT_SHIFT 0 125 126 #define BQ24190_REG_F 0x09 /* Fault */ 127 #define BQ24190_REG_F_WATCHDOG_FAULT_MASK BIT(7) 128 #define BQ24190_REG_F_WATCHDOG_FAULT_SHIFT 7 129 #define BQ24190_REG_F_BOOST_FAULT_MASK BIT(6) 130 #define BQ24190_REG_F_BOOST_FAULT_SHIFT 6 131 #define BQ24190_REG_F_CHRG_FAULT_MASK (BIT(5) | BIT(4)) 132 #define BQ24190_REG_F_CHRG_FAULT_SHIFT 4 133 #define BQ24190_REG_F_BAT_FAULT_MASK BIT(3) 134 #define BQ24190_REG_F_BAT_FAULT_SHIFT 3 135 #define BQ24190_REG_F_NTC_FAULT_MASK (BIT(2) | BIT(1) | BIT(0)) 136 #define BQ24190_REG_F_NTC_FAULT_SHIFT 0 137 138 #define BQ24190_REG_VPRS 0x0A /* Vendor/Part/Revision Status */ 139 #define BQ24190_REG_VPRS_PN_MASK (BIT(5) | BIT(4) | BIT(3)) 140 #define BQ24190_REG_VPRS_PN_SHIFT 3 141 #define BQ24190_REG_VPRS_PN_24190 0x4 142 #define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193, 24196 */ 143 #define BQ24190_REG_VPRS_PN_24192I 0x3 144 #define BQ24190_REG_VPRS_TS_PROFILE_MASK BIT(2) 145 #define BQ24190_REG_VPRS_TS_PROFILE_SHIFT 2 146 #define BQ24190_REG_VPRS_DEV_REG_MASK (BIT(1) | BIT(0)) 147 #define BQ24190_REG_VPRS_DEV_REG_SHIFT 0 148 149 /* 150 * The FAULT register is latched by the bq24190 (except for NTC_FAULT) 151 * so the first read after a fault returns the latched value and subsequent 152 * reads return the current value. In order to return the fault status 153 * to the user, have the interrupt handler save the reg's value and retrieve 154 * it in the appropriate health/status routine. 155 */ 156 struct bq24190_dev_info { 157 struct i2c_client *client; 158 struct device *dev; 159 struct extcon_dev *edev; 160 struct power_supply *charger; 161 struct power_supply *battery; 162 struct delayed_work input_current_limit_work; 163 char model_name[I2C_NAME_SIZE]; 164 bool initialized; 165 bool irq_event; 166 bool otg_vbus_enabled; 167 int charge_type; 168 u16 sys_min; 169 u16 iprechg; 170 u16 iterm; 171 u32 ichg; 172 u32 ichg_max; 173 u32 vreg; 174 u32 vreg_max; 175 struct mutex f_reg_lock; 176 u8 f_reg; 177 u8 ss_reg; 178 u8 watchdog; 179 }; 180 181 static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi, 182 const union power_supply_propval *val); 183 184 static const unsigned int bq24190_usb_extcon_cable[] = { 185 EXTCON_USB, 186 EXTCON_NONE, 187 }; 188 189 /* 190 * The tables below provide a 2-way mapping for the value that goes in 191 * the register field and the real-world value that it represents. 192 * The index of the array is the value that goes in the register; the 193 * number at that index in the array is the real-world value that it 194 * represents. 195 */ 196 197 /* REG00[2:0] (IINLIM) in uAh */ 198 static const int bq24190_isc_iinlim_values[] = { 199 100000, 150000, 500000, 900000, 1200000, 1500000, 2000000, 3000000 200 }; 201 202 /* REG02[7:2] (ICHG) in uAh */ 203 static const int bq24190_ccc_ichg_values[] = { 204 512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000, 205 1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000, 206 1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000, 207 2048000, 2112000, 2176000, 2240000, 2304000, 2368000, 2432000, 2496000, 208 2560000, 2624000, 2688000, 2752000, 2816000, 2880000, 2944000, 3008000, 209 3072000, 3136000, 3200000, 3264000, 3328000, 3392000, 3456000, 3520000, 210 3584000, 3648000, 3712000, 3776000, 3840000, 3904000, 3968000, 4032000, 211 4096000, 4160000, 4224000, 4288000, 4352000, 4416000, 4480000, 4544000 212 }; 213 214 /* REG04[7:2] (VREG) in uV */ 215 static const int bq24190_cvc_vreg_values[] = { 216 3504000, 3520000, 3536000, 3552000, 3568000, 3584000, 3600000, 3616000, 217 3632000, 3648000, 3664000, 3680000, 3696000, 3712000, 3728000, 3744000, 218 3760000, 3776000, 3792000, 3808000, 3824000, 3840000, 3856000, 3872000, 219 3888000, 3904000, 3920000, 3936000, 3952000, 3968000, 3984000, 4000000, 220 4016000, 4032000, 4048000, 4064000, 4080000, 4096000, 4112000, 4128000, 221 4144000, 4160000, 4176000, 4192000, 4208000, 4224000, 4240000, 4256000, 222 4272000, 4288000, 4304000, 4320000, 4336000, 4352000, 4368000, 4384000, 223 4400000 224 }; 225 226 /* REG06[1:0] (TREG) in tenths of degrees Celsius */ 227 static const int bq24190_ictrc_treg_values[] = { 228 600, 800, 1000, 1200 229 }; 230 231 /* 232 * Return the index in 'tbl' of greatest value that is less than or equal to 233 * 'val'. The index range returned is 0 to 'tbl_size' - 1. Assumes that 234 * the values in 'tbl' are sorted from smallest to largest and 'tbl_size' 235 * is less than 2^8. 236 */ 237 static u8 bq24190_find_idx(const int tbl[], int tbl_size, int v) 238 { 239 int i; 240 241 for (i = 1; i < tbl_size; i++) 242 if (v < tbl[i]) 243 break; 244 245 return i - 1; 246 } 247 248 /* Basic driver I/O routines */ 249 250 static int bq24190_read(struct bq24190_dev_info *bdi, u8 reg, u8 *data) 251 { 252 int ret; 253 254 ret = i2c_smbus_read_byte_data(bdi->client, reg); 255 if (ret < 0) 256 return ret; 257 258 *data = ret; 259 return 0; 260 } 261 262 static int bq24190_write(struct bq24190_dev_info *bdi, u8 reg, u8 data) 263 { 264 return i2c_smbus_write_byte_data(bdi->client, reg, data); 265 } 266 267 static int bq24190_read_mask(struct bq24190_dev_info *bdi, u8 reg, 268 u8 mask, u8 shift, u8 *data) 269 { 270 u8 v; 271 int ret; 272 273 ret = bq24190_read(bdi, reg, &v); 274 if (ret < 0) 275 return ret; 276 277 v &= mask; 278 v >>= shift; 279 *data = v; 280 281 return 0; 282 } 283 284 static int bq24190_write_mask(struct bq24190_dev_info *bdi, u8 reg, 285 u8 mask, u8 shift, u8 data) 286 { 287 u8 v; 288 int ret; 289 290 ret = bq24190_read(bdi, reg, &v); 291 if (ret < 0) 292 return ret; 293 294 v &= ~mask; 295 v |= ((data << shift) & mask); 296 297 return bq24190_write(bdi, reg, v); 298 } 299 300 static int bq24190_get_field_val(struct bq24190_dev_info *bdi, 301 u8 reg, u8 mask, u8 shift, 302 const int tbl[], int tbl_size, 303 int *val) 304 { 305 u8 v; 306 int ret; 307 308 ret = bq24190_read_mask(bdi, reg, mask, shift, &v); 309 if (ret < 0) 310 return ret; 311 312 v = (v >= tbl_size) ? (tbl_size - 1) : v; 313 *val = tbl[v]; 314 315 return 0; 316 } 317 318 static int bq24190_set_field_val(struct bq24190_dev_info *bdi, 319 u8 reg, u8 mask, u8 shift, 320 const int tbl[], int tbl_size, 321 int val) 322 { 323 u8 idx; 324 325 idx = bq24190_find_idx(tbl, tbl_size, val); 326 327 return bq24190_write_mask(bdi, reg, mask, shift, idx); 328 } 329 330 #ifdef CONFIG_SYSFS 331 /* 332 * There are a numerous options that are configurable on the bq24190 333 * that go well beyond what the power_supply properties provide access to. 334 * Provide sysfs access to them so they can be examined and possibly modified 335 * on the fly. They will be provided for the charger power_supply object only 336 * and will be prefixed by 'f_' to make them easier to recognize. 337 */ 338 339 #define BQ24190_SYSFS_FIELD(_name, r, f, m, store) \ 340 { \ 341 .attr = __ATTR(f_##_name, m, bq24190_sysfs_show, store), \ 342 .reg = BQ24190_REG_##r, \ 343 .mask = BQ24190_REG_##r##_##f##_MASK, \ 344 .shift = BQ24190_REG_##r##_##f##_SHIFT, \ 345 } 346 347 #define BQ24190_SYSFS_FIELD_RW(_name, r, f) \ 348 BQ24190_SYSFS_FIELD(_name, r, f, S_IWUSR | S_IRUGO, \ 349 bq24190_sysfs_store) 350 351 #define BQ24190_SYSFS_FIELD_RO(_name, r, f) \ 352 BQ24190_SYSFS_FIELD(_name, r, f, S_IRUGO, NULL) 353 354 static ssize_t bq24190_sysfs_show(struct device *dev, 355 struct device_attribute *attr, char *buf); 356 static ssize_t bq24190_sysfs_store(struct device *dev, 357 struct device_attribute *attr, const char *buf, size_t count); 358 359 struct bq24190_sysfs_field_info { 360 struct device_attribute attr; 361 u8 reg; 362 u8 mask; 363 u8 shift; 364 }; 365 366 /* On i386 ptrace-abi.h defines SS that breaks the macro calls below. */ 367 #undef SS 368 369 static struct bq24190_sysfs_field_info bq24190_sysfs_field_tbl[] = { 370 /* sysfs name reg field in reg */ 371 BQ24190_SYSFS_FIELD_RW(en_hiz, ISC, EN_HIZ), 372 BQ24190_SYSFS_FIELD_RW(vindpm, ISC, VINDPM), 373 BQ24190_SYSFS_FIELD_RW(iinlim, ISC, IINLIM), 374 BQ24190_SYSFS_FIELD_RW(chg_config, POC, CHG_CONFIG), 375 BQ24190_SYSFS_FIELD_RW(sys_min, POC, SYS_MIN), 376 BQ24190_SYSFS_FIELD_RW(boost_lim, POC, BOOST_LIM), 377 BQ24190_SYSFS_FIELD_RW(ichg, CCC, ICHG), 378 BQ24190_SYSFS_FIELD_RW(force_20_pct, CCC, FORCE_20PCT), 379 BQ24190_SYSFS_FIELD_RW(iprechg, PCTCC, IPRECHG), 380 BQ24190_SYSFS_FIELD_RW(iterm, PCTCC, ITERM), 381 BQ24190_SYSFS_FIELD_RW(vreg, CVC, VREG), 382 BQ24190_SYSFS_FIELD_RW(batlowv, CVC, BATLOWV), 383 BQ24190_SYSFS_FIELD_RW(vrechg, CVC, VRECHG), 384 BQ24190_SYSFS_FIELD_RW(en_term, CTTC, EN_TERM), 385 BQ24190_SYSFS_FIELD_RW(term_stat, CTTC, TERM_STAT), 386 BQ24190_SYSFS_FIELD_RO(watchdog, CTTC, WATCHDOG), 387 BQ24190_SYSFS_FIELD_RW(en_timer, CTTC, EN_TIMER), 388 BQ24190_SYSFS_FIELD_RW(chg_timer, CTTC, CHG_TIMER), 389 BQ24190_SYSFS_FIELD_RW(jeta_iset, CTTC, JEITA_ISET), 390 BQ24190_SYSFS_FIELD_RW(bat_comp, ICTRC, BAT_COMP), 391 BQ24190_SYSFS_FIELD_RW(vclamp, ICTRC, VCLAMP), 392 BQ24190_SYSFS_FIELD_RW(treg, ICTRC, TREG), 393 BQ24190_SYSFS_FIELD_RW(dpdm_en, MOC, DPDM_EN), 394 BQ24190_SYSFS_FIELD_RW(tmr2x_en, MOC, TMR2X_EN), 395 BQ24190_SYSFS_FIELD_RW(batfet_disable, MOC, BATFET_DISABLE), 396 BQ24190_SYSFS_FIELD_RW(jeita_vset, MOC, JEITA_VSET), 397 BQ24190_SYSFS_FIELD_RO(int_mask, MOC, INT_MASK), 398 BQ24190_SYSFS_FIELD_RO(vbus_stat, SS, VBUS_STAT), 399 BQ24190_SYSFS_FIELD_RO(chrg_stat, SS, CHRG_STAT), 400 BQ24190_SYSFS_FIELD_RO(dpm_stat, SS, DPM_STAT), 401 BQ24190_SYSFS_FIELD_RO(pg_stat, SS, PG_STAT), 402 BQ24190_SYSFS_FIELD_RO(therm_stat, SS, THERM_STAT), 403 BQ24190_SYSFS_FIELD_RO(vsys_stat, SS, VSYS_STAT), 404 BQ24190_SYSFS_FIELD_RO(watchdog_fault, F, WATCHDOG_FAULT), 405 BQ24190_SYSFS_FIELD_RO(boost_fault, F, BOOST_FAULT), 406 BQ24190_SYSFS_FIELD_RO(chrg_fault, F, CHRG_FAULT), 407 BQ24190_SYSFS_FIELD_RO(bat_fault, F, BAT_FAULT), 408 BQ24190_SYSFS_FIELD_RO(ntc_fault, F, NTC_FAULT), 409 BQ24190_SYSFS_FIELD_RO(pn, VPRS, PN), 410 BQ24190_SYSFS_FIELD_RO(ts_profile, VPRS, TS_PROFILE), 411 BQ24190_SYSFS_FIELD_RO(dev_reg, VPRS, DEV_REG), 412 }; 413 414 static struct attribute * 415 bq24190_sysfs_attrs[ARRAY_SIZE(bq24190_sysfs_field_tbl) + 1]; 416 417 ATTRIBUTE_GROUPS(bq24190_sysfs); 418 419 static void bq24190_sysfs_init_attrs(void) 420 { 421 int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl); 422 423 for (i = 0; i < limit; i++) 424 bq24190_sysfs_attrs[i] = &bq24190_sysfs_field_tbl[i].attr.attr; 425 426 bq24190_sysfs_attrs[limit] = NULL; /* Has additional entry for this */ 427 } 428 429 static struct bq24190_sysfs_field_info *bq24190_sysfs_field_lookup( 430 const char *name) 431 { 432 int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl); 433 434 for (i = 0; i < limit; i++) 435 if (!strcmp(name, bq24190_sysfs_field_tbl[i].attr.attr.name)) 436 break; 437 438 if (i >= limit) 439 return NULL; 440 441 return &bq24190_sysfs_field_tbl[i]; 442 } 443 444 static ssize_t bq24190_sysfs_show(struct device *dev, 445 struct device_attribute *attr, char *buf) 446 { 447 struct power_supply *psy = dev_get_drvdata(dev); 448 struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); 449 struct bq24190_sysfs_field_info *info; 450 ssize_t count; 451 int ret; 452 u8 v; 453 454 info = bq24190_sysfs_field_lookup(attr->attr.name); 455 if (!info) 456 return -EINVAL; 457 458 ret = pm_runtime_resume_and_get(bdi->dev); 459 if (ret < 0) 460 return ret; 461 462 ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v); 463 if (ret) 464 count = ret; 465 else 466 count = sysfs_emit(buf, "%hhx\n", v); 467 468 pm_runtime_mark_last_busy(bdi->dev); 469 pm_runtime_put_autosuspend(bdi->dev); 470 471 return count; 472 } 473 474 static ssize_t bq24190_sysfs_store(struct device *dev, 475 struct device_attribute *attr, const char *buf, size_t count) 476 { 477 struct power_supply *psy = dev_get_drvdata(dev); 478 struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); 479 struct bq24190_sysfs_field_info *info; 480 int ret; 481 u8 v; 482 483 info = bq24190_sysfs_field_lookup(attr->attr.name); 484 if (!info) 485 return -EINVAL; 486 487 ret = kstrtou8(buf, 0, &v); 488 if (ret < 0) 489 return ret; 490 491 ret = pm_runtime_resume_and_get(bdi->dev); 492 if (ret < 0) 493 return ret; 494 495 ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v); 496 if (ret) 497 count = ret; 498 499 pm_runtime_mark_last_busy(bdi->dev); 500 pm_runtime_put_autosuspend(bdi->dev); 501 502 return count; 503 } 504 #endif 505 506 static int bq24190_set_otg_vbus(struct bq24190_dev_info *bdi, bool enable) 507 { 508 union power_supply_propval val = { .intval = bdi->charge_type }; 509 int ret; 510 511 ret = pm_runtime_resume_and_get(bdi->dev); 512 if (ret < 0) { 513 dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret); 514 return ret; 515 } 516 517 bdi->otg_vbus_enabled = enable; 518 if (enable) 519 ret = bq24190_write_mask(bdi, BQ24190_REG_POC, 520 BQ24190_REG_POC_CHG_CONFIG_MASK, 521 BQ24190_REG_POC_CHG_CONFIG_SHIFT, 522 BQ24190_REG_POC_CHG_CONFIG_OTG); 523 else 524 ret = bq24190_charger_set_charge_type(bdi, &val); 525 526 pm_runtime_mark_last_busy(bdi->dev); 527 pm_runtime_put_autosuspend(bdi->dev); 528 529 return ret; 530 } 531 532 #ifdef CONFIG_REGULATOR 533 static int bq24190_vbus_enable(struct regulator_dev *dev) 534 { 535 return bq24190_set_otg_vbus(rdev_get_drvdata(dev), true); 536 } 537 538 static int bq24190_vbus_disable(struct regulator_dev *dev) 539 { 540 return bq24190_set_otg_vbus(rdev_get_drvdata(dev), false); 541 } 542 543 static int bq24190_vbus_is_enabled(struct regulator_dev *dev) 544 { 545 struct bq24190_dev_info *bdi = rdev_get_drvdata(dev); 546 int ret; 547 u8 val; 548 549 ret = pm_runtime_resume_and_get(bdi->dev); 550 if (ret < 0) { 551 dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret); 552 return ret; 553 } 554 555 ret = bq24190_read_mask(bdi, BQ24190_REG_POC, 556 BQ24190_REG_POC_CHG_CONFIG_MASK, 557 BQ24190_REG_POC_CHG_CONFIG_SHIFT, &val); 558 559 pm_runtime_mark_last_busy(bdi->dev); 560 pm_runtime_put_autosuspend(bdi->dev); 561 562 if (ret) 563 return ret; 564 565 bdi->otg_vbus_enabled = (val == BQ24190_REG_POC_CHG_CONFIG_OTG || 566 val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT); 567 return bdi->otg_vbus_enabled; 568 } 569 570 static const struct regulator_ops bq24190_vbus_ops = { 571 .enable = bq24190_vbus_enable, 572 .disable = bq24190_vbus_disable, 573 .is_enabled = bq24190_vbus_is_enabled, 574 }; 575 576 static const struct regulator_desc bq24190_vbus_desc = { 577 .name = "usb_otg_vbus", 578 .of_match = "usb-otg-vbus", 579 .type = REGULATOR_VOLTAGE, 580 .owner = THIS_MODULE, 581 .ops = &bq24190_vbus_ops, 582 .fixed_uV = 5000000, 583 .n_voltages = 1, 584 }; 585 586 static const struct regulator_init_data bq24190_vbus_init_data = { 587 .constraints = { 588 .valid_ops_mask = REGULATOR_CHANGE_STATUS, 589 }, 590 }; 591 592 static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi) 593 { 594 struct bq24190_platform_data *pdata = bdi->dev->platform_data; 595 struct regulator_config cfg = { }; 596 struct regulator_dev *reg; 597 int ret = 0; 598 599 cfg.dev = bdi->dev; 600 if (pdata && pdata->regulator_init_data) 601 cfg.init_data = pdata->regulator_init_data; 602 else 603 cfg.init_data = &bq24190_vbus_init_data; 604 cfg.driver_data = bdi; 605 reg = devm_regulator_register(bdi->dev, &bq24190_vbus_desc, &cfg); 606 if (IS_ERR(reg)) { 607 ret = PTR_ERR(reg); 608 dev_err(bdi->dev, "Can't register regulator: %d\n", ret); 609 } 610 611 return ret; 612 } 613 #else 614 static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi) 615 { 616 return 0; 617 } 618 #endif 619 620 static int bq24190_set_config(struct bq24190_dev_info *bdi) 621 { 622 int ret; 623 u8 v; 624 625 ret = bq24190_read(bdi, BQ24190_REG_CTTC, &v); 626 if (ret < 0) 627 return ret; 628 629 bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >> 630 BQ24190_REG_CTTC_WATCHDOG_SHIFT); 631 632 /* 633 * According to the "Host Mode and default Mode" section of the 634 * manual, a write to any register causes the bq24190 to switch 635 * from default mode to host mode. It will switch back to default 636 * mode after a WDT timeout unless the WDT is turned off as well. 637 * So, by simply turning off the WDT, we accomplish both with the 638 * same write. 639 */ 640 v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK; 641 642 ret = bq24190_write(bdi, BQ24190_REG_CTTC, v); 643 if (ret < 0) 644 return ret; 645 646 if (bdi->sys_min) { 647 v = bdi->sys_min / 100 - 30; // manual section 9.5.1.2, table 9 648 ret = bq24190_write_mask(bdi, BQ24190_REG_POC, 649 BQ24190_REG_POC_SYS_MIN_MASK, 650 BQ24190_REG_POC_SYS_MIN_SHIFT, 651 v); 652 if (ret < 0) 653 return ret; 654 } 655 656 if (bdi->iprechg) { 657 v = bdi->iprechg / 128 - 1; // manual section 9.5.1.4, table 11 658 ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC, 659 BQ24190_REG_PCTCC_IPRECHG_MASK, 660 BQ24190_REG_PCTCC_IPRECHG_SHIFT, 661 v); 662 if (ret < 0) 663 return ret; 664 } 665 666 if (bdi->iterm) { 667 v = bdi->iterm / 128 - 1; // manual section 9.5.1.4, table 11 668 ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC, 669 BQ24190_REG_PCTCC_ITERM_MASK, 670 BQ24190_REG_PCTCC_ITERM_SHIFT, 671 v); 672 if (ret < 0) 673 return ret; 674 } 675 676 if (bdi->ichg) { 677 ret = bq24190_set_field_val(bdi, BQ24190_REG_CCC, 678 BQ24190_REG_CCC_ICHG_MASK, 679 BQ24190_REG_CCC_ICHG_SHIFT, 680 bq24190_ccc_ichg_values, 681 ARRAY_SIZE(bq24190_ccc_ichg_values), 682 bdi->ichg); 683 if (ret < 0) 684 return ret; 685 } 686 687 if (bdi->vreg) { 688 ret = bq24190_set_field_val(bdi, BQ24190_REG_CVC, 689 BQ24190_REG_CVC_VREG_MASK, 690 BQ24190_REG_CVC_VREG_SHIFT, 691 bq24190_cvc_vreg_values, 692 ARRAY_SIZE(bq24190_cvc_vreg_values), 693 bdi->vreg); 694 if (ret < 0) 695 return ret; 696 } 697 698 return 0; 699 } 700 701 static int bq24190_register_reset(struct bq24190_dev_info *bdi) 702 { 703 int ret, limit = 100; 704 u8 v; 705 706 /* 707 * This prop. can be passed on device instantiation from platform code: 708 * struct property_entry pe[] = 709 * { PROPERTY_ENTRY_BOOL("disable-reset"), ... }; 710 * struct i2c_board_info bi = 711 * { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq }; 712 * struct i2c_adapter ad = { ... }; 713 * i2c_add_adapter(&ad); 714 * i2c_new_client_device(&ad, &bi); 715 */ 716 if (device_property_read_bool(bdi->dev, "disable-reset")) 717 return 0; 718 719 /* Reset the registers */ 720 ret = bq24190_write_mask(bdi, BQ24190_REG_POC, 721 BQ24190_REG_POC_RESET_MASK, 722 BQ24190_REG_POC_RESET_SHIFT, 723 0x1); 724 if (ret < 0) 725 return ret; 726 727 /* Reset bit will be cleared by hardware so poll until it is */ 728 do { 729 ret = bq24190_read_mask(bdi, BQ24190_REG_POC, 730 BQ24190_REG_POC_RESET_MASK, 731 BQ24190_REG_POC_RESET_SHIFT, 732 &v); 733 if (ret < 0) 734 return ret; 735 736 if (v == 0) 737 return 0; 738 739 usleep_range(100, 200); 740 } while (--limit); 741 742 return -EIO; 743 } 744 745 /* Charger power supply property routines */ 746 747 static int bq24190_charger_get_charge_type(struct bq24190_dev_info *bdi, 748 union power_supply_propval *val) 749 { 750 u8 v; 751 int type, ret; 752 753 ret = bq24190_read_mask(bdi, BQ24190_REG_POC, 754 BQ24190_REG_POC_CHG_CONFIG_MASK, 755 BQ24190_REG_POC_CHG_CONFIG_SHIFT, 756 &v); 757 if (ret < 0) 758 return ret; 759 760 /* If POC[CHG_CONFIG] (REG01[5:4]) == 0, charge is disabled */ 761 if (!v) { 762 type = POWER_SUPPLY_CHARGE_TYPE_NONE; 763 } else { 764 ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, 765 BQ24190_REG_CCC_FORCE_20PCT_MASK, 766 BQ24190_REG_CCC_FORCE_20PCT_SHIFT, 767 &v); 768 if (ret < 0) 769 return ret; 770 771 type = (v) ? POWER_SUPPLY_CHARGE_TYPE_TRICKLE : 772 POWER_SUPPLY_CHARGE_TYPE_FAST; 773 } 774 775 val->intval = type; 776 777 return 0; 778 } 779 780 static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi, 781 const union power_supply_propval *val) 782 { 783 u8 chg_config, force_20pct, en_term; 784 int ret; 785 786 /* 787 * According to the "Termination when REG02[0] = 1" section of 788 * the bq24190 manual, the trickle charge could be less than the 789 * termination current so it recommends turning off the termination 790 * function. 791 * 792 * Note: AFAICT from the datasheet, the user will have to manually 793 * turn off the charging when in 20% mode. If its not turned off, 794 * there could be battery damage. So, use this mode at your own risk. 795 */ 796 switch (val->intval) { 797 case POWER_SUPPLY_CHARGE_TYPE_NONE: 798 chg_config = 0x0; 799 break; 800 case POWER_SUPPLY_CHARGE_TYPE_TRICKLE: 801 chg_config = 0x1; 802 force_20pct = 0x1; 803 en_term = 0x0; 804 break; 805 case POWER_SUPPLY_CHARGE_TYPE_FAST: 806 chg_config = 0x1; 807 force_20pct = 0x0; 808 en_term = 0x1; 809 break; 810 default: 811 return -EINVAL; 812 } 813 814 bdi->charge_type = val->intval; 815 /* 816 * If the 5V Vbus boost regulator is enabled delay setting 817 * the charge-type until its gets disabled. 818 */ 819 if (bdi->otg_vbus_enabled) 820 return 0; 821 822 if (chg_config) { /* Enabling the charger */ 823 ret = bq24190_write_mask(bdi, BQ24190_REG_CCC, 824 BQ24190_REG_CCC_FORCE_20PCT_MASK, 825 BQ24190_REG_CCC_FORCE_20PCT_SHIFT, 826 force_20pct); 827 if (ret < 0) 828 return ret; 829 830 ret = bq24190_write_mask(bdi, BQ24190_REG_CTTC, 831 BQ24190_REG_CTTC_EN_TERM_MASK, 832 BQ24190_REG_CTTC_EN_TERM_SHIFT, 833 en_term); 834 if (ret < 0) 835 return ret; 836 } 837 838 return bq24190_write_mask(bdi, BQ24190_REG_POC, 839 BQ24190_REG_POC_CHG_CONFIG_MASK, 840 BQ24190_REG_POC_CHG_CONFIG_SHIFT, chg_config); 841 } 842 843 static int bq24190_charger_get_health(struct bq24190_dev_info *bdi, 844 union power_supply_propval *val) 845 { 846 u8 v; 847 int health; 848 849 mutex_lock(&bdi->f_reg_lock); 850 v = bdi->f_reg; 851 mutex_unlock(&bdi->f_reg_lock); 852 853 if (v & BQ24190_REG_F_NTC_FAULT_MASK) { 854 switch (v >> BQ24190_REG_F_NTC_FAULT_SHIFT & 0x7) { 855 case 0x1: /* TS1 Cold */ 856 case 0x3: /* TS2 Cold */ 857 case 0x5: /* Both Cold */ 858 health = POWER_SUPPLY_HEALTH_COLD; 859 break; 860 case 0x2: /* TS1 Hot */ 861 case 0x4: /* TS2 Hot */ 862 case 0x6: /* Both Hot */ 863 health = POWER_SUPPLY_HEALTH_OVERHEAT; 864 break; 865 default: 866 health = POWER_SUPPLY_HEALTH_UNKNOWN; 867 } 868 } else if (v & BQ24190_REG_F_BAT_FAULT_MASK) { 869 health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; 870 } else if (v & BQ24190_REG_F_CHRG_FAULT_MASK) { 871 switch (v >> BQ24190_REG_F_CHRG_FAULT_SHIFT & 0x3) { 872 case 0x1: /* Input Fault (VBUS OVP or VBAT<VBUS<3.8V) */ 873 /* 874 * This could be over-voltage or under-voltage 875 * and there's no way to tell which. Instead 876 * of looking foolish and returning 'OVERVOLTAGE' 877 * when its really under-voltage, just return 878 * 'UNSPEC_FAILURE'. 879 */ 880 health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; 881 break; 882 case 0x2: /* Thermal Shutdown */ 883 health = POWER_SUPPLY_HEALTH_OVERHEAT; 884 break; 885 case 0x3: /* Charge Safety Timer Expiration */ 886 health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; 887 break; 888 default: /* prevent compiler warning */ 889 health = -1; 890 } 891 } else if (v & BQ24190_REG_F_BOOST_FAULT_MASK) { 892 /* 893 * This could be over-current or over-voltage but there's 894 * no way to tell which. Return 'OVERVOLTAGE' since there 895 * isn't an 'OVERCURRENT' value defined that we can return 896 * even if it was over-current. 897 */ 898 health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; 899 } else { 900 health = POWER_SUPPLY_HEALTH_GOOD; 901 } 902 903 val->intval = health; 904 905 return 0; 906 } 907 908 static int bq24190_charger_get_online(struct bq24190_dev_info *bdi, 909 union power_supply_propval *val) 910 { 911 u8 pg_stat, batfet_disable; 912 int ret; 913 914 ret = bq24190_read_mask(bdi, BQ24190_REG_SS, 915 BQ24190_REG_SS_PG_STAT_MASK, 916 BQ24190_REG_SS_PG_STAT_SHIFT, &pg_stat); 917 if (ret < 0) 918 return ret; 919 920 ret = bq24190_read_mask(bdi, BQ24190_REG_MOC, 921 BQ24190_REG_MOC_BATFET_DISABLE_MASK, 922 BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable); 923 if (ret < 0) 924 return ret; 925 926 val->intval = pg_stat && !batfet_disable; 927 928 return 0; 929 } 930 931 static int bq24190_battery_set_online(struct bq24190_dev_info *bdi, 932 const union power_supply_propval *val); 933 static int bq24190_battery_get_status(struct bq24190_dev_info *bdi, 934 union power_supply_propval *val); 935 static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi, 936 union power_supply_propval *val); 937 static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi, 938 const union power_supply_propval *val); 939 940 static int bq24190_charger_set_online(struct bq24190_dev_info *bdi, 941 const union power_supply_propval *val) 942 { 943 return bq24190_battery_set_online(bdi, val); 944 } 945 946 static int bq24190_charger_get_status(struct bq24190_dev_info *bdi, 947 union power_supply_propval *val) 948 { 949 return bq24190_battery_get_status(bdi, val); 950 } 951 952 static int bq24190_charger_get_temp_alert_max(struct bq24190_dev_info *bdi, 953 union power_supply_propval *val) 954 { 955 return bq24190_battery_get_temp_alert_max(bdi, val); 956 } 957 958 static int bq24190_charger_set_temp_alert_max(struct bq24190_dev_info *bdi, 959 const union power_supply_propval *val) 960 { 961 return bq24190_battery_set_temp_alert_max(bdi, val); 962 } 963 964 static int bq24190_charger_get_precharge(struct bq24190_dev_info *bdi, 965 union power_supply_propval *val) 966 { 967 u8 v; 968 int curr, ret; 969 970 ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC, 971 BQ24190_REG_PCTCC_IPRECHG_MASK, 972 BQ24190_REG_PCTCC_IPRECHG_SHIFT, &v); 973 if (ret < 0) 974 return ret; 975 976 curr = ++v * 128 * 1000; 977 978 ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, 979 BQ24190_REG_CCC_FORCE_20PCT_MASK, 980 BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v); 981 if (ret < 0) 982 return ret; 983 984 /* If FORCE_20PCT is enabled, then current is 50% of IPRECHG value */ 985 if (v) 986 curr /= 2; 987 988 val->intval = curr; 989 990 return 0; 991 } 992 993 static int bq24190_charger_get_charge_term(struct bq24190_dev_info *bdi, 994 union power_supply_propval *val) 995 { 996 u8 v; 997 int ret; 998 999 ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC, 1000 BQ24190_REG_PCTCC_ITERM_MASK, 1001 BQ24190_REG_PCTCC_ITERM_SHIFT, &v); 1002 if (ret < 0) 1003 return ret; 1004 1005 val->intval = ++v * 128 * 1000; 1006 return 0; 1007 } 1008 1009 static int bq24190_charger_get_current(struct bq24190_dev_info *bdi, 1010 union power_supply_propval *val) 1011 { 1012 u8 v; 1013 int curr, ret; 1014 1015 ret = bq24190_get_field_val(bdi, BQ24190_REG_CCC, 1016 BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT, 1017 bq24190_ccc_ichg_values, 1018 ARRAY_SIZE(bq24190_ccc_ichg_values), &curr); 1019 if (ret < 0) 1020 return ret; 1021 1022 ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, 1023 BQ24190_REG_CCC_FORCE_20PCT_MASK, 1024 BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v); 1025 if (ret < 0) 1026 return ret; 1027 1028 /* If FORCE_20PCT is enabled, then current is 20% of ICHG value */ 1029 if (v) 1030 curr /= 5; 1031 1032 val->intval = curr; 1033 return 0; 1034 } 1035 1036 static int bq24190_charger_set_current(struct bq24190_dev_info *bdi, 1037 const union power_supply_propval *val) 1038 { 1039 u8 v; 1040 int ret, curr = val->intval; 1041 1042 ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, 1043 BQ24190_REG_CCC_FORCE_20PCT_MASK, 1044 BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v); 1045 if (ret < 0) 1046 return ret; 1047 1048 /* If FORCE_20PCT is enabled, have to multiply value passed in by 5 */ 1049 if (v) 1050 curr *= 5; 1051 1052 if (curr > bdi->ichg_max) 1053 return -EINVAL; 1054 1055 ret = bq24190_set_field_val(bdi, BQ24190_REG_CCC, 1056 BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT, 1057 bq24190_ccc_ichg_values, 1058 ARRAY_SIZE(bq24190_ccc_ichg_values), curr); 1059 if (ret < 0) 1060 return ret; 1061 1062 bdi->ichg = curr; 1063 1064 return 0; 1065 } 1066 1067 static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi, 1068 union power_supply_propval *val) 1069 { 1070 int voltage, ret; 1071 1072 ret = bq24190_get_field_val(bdi, BQ24190_REG_CVC, 1073 BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT, 1074 bq24190_cvc_vreg_values, 1075 ARRAY_SIZE(bq24190_cvc_vreg_values), &voltage); 1076 if (ret < 0) 1077 return ret; 1078 1079 val->intval = voltage; 1080 return 0; 1081 } 1082 1083 static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi, 1084 const union power_supply_propval *val) 1085 { 1086 int ret; 1087 1088 if (val->intval > bdi->vreg_max) 1089 return -EINVAL; 1090 1091 ret = bq24190_set_field_val(bdi, BQ24190_REG_CVC, 1092 BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT, 1093 bq24190_cvc_vreg_values, 1094 ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval); 1095 if (ret < 0) 1096 return ret; 1097 1098 bdi->vreg = val->intval; 1099 1100 return 0; 1101 } 1102 1103 static int bq24190_charger_get_iinlimit(struct bq24190_dev_info *bdi, 1104 union power_supply_propval *val) 1105 { 1106 int iinlimit, ret; 1107 1108 ret = bq24190_get_field_val(bdi, BQ24190_REG_ISC, 1109 BQ24190_REG_ISC_IINLIM_MASK, 1110 BQ24190_REG_ISC_IINLIM_SHIFT, 1111 bq24190_isc_iinlim_values, 1112 ARRAY_SIZE(bq24190_isc_iinlim_values), &iinlimit); 1113 if (ret < 0) 1114 return ret; 1115 1116 val->intval = iinlimit; 1117 return 0; 1118 } 1119 1120 static int bq24190_charger_set_iinlimit(struct bq24190_dev_info *bdi, 1121 const union power_supply_propval *val) 1122 { 1123 return bq24190_set_field_val(bdi, BQ24190_REG_ISC, 1124 BQ24190_REG_ISC_IINLIM_MASK, 1125 BQ24190_REG_ISC_IINLIM_SHIFT, 1126 bq24190_isc_iinlim_values, 1127 ARRAY_SIZE(bq24190_isc_iinlim_values), val->intval); 1128 } 1129 1130 static int bq24190_charger_get_property(struct power_supply *psy, 1131 enum power_supply_property psp, union power_supply_propval *val) 1132 { 1133 struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); 1134 int ret; 1135 1136 dev_dbg(bdi->dev, "prop: %d\n", psp); 1137 1138 ret = pm_runtime_resume_and_get(bdi->dev); 1139 if (ret < 0) 1140 return ret; 1141 1142 switch (psp) { 1143 case POWER_SUPPLY_PROP_CHARGE_TYPE: 1144 ret = bq24190_charger_get_charge_type(bdi, val); 1145 break; 1146 case POWER_SUPPLY_PROP_HEALTH: 1147 ret = bq24190_charger_get_health(bdi, val); 1148 break; 1149 case POWER_SUPPLY_PROP_ONLINE: 1150 ret = bq24190_charger_get_online(bdi, val); 1151 break; 1152 case POWER_SUPPLY_PROP_STATUS: 1153 ret = bq24190_charger_get_status(bdi, val); 1154 break; 1155 case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: 1156 ret = bq24190_charger_get_temp_alert_max(bdi, val); 1157 break; 1158 case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: 1159 ret = bq24190_charger_get_precharge(bdi, val); 1160 break; 1161 case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: 1162 ret = bq24190_charger_get_charge_term(bdi, val); 1163 break; 1164 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: 1165 ret = bq24190_charger_get_current(bdi, val); 1166 break; 1167 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: 1168 val->intval = bdi->ichg_max; 1169 ret = 0; 1170 break; 1171 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: 1172 ret = bq24190_charger_get_voltage(bdi, val); 1173 break; 1174 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: 1175 val->intval = bdi->vreg_max; 1176 ret = 0; 1177 break; 1178 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: 1179 ret = bq24190_charger_get_iinlimit(bdi, val); 1180 break; 1181 case POWER_SUPPLY_PROP_SCOPE: 1182 val->intval = POWER_SUPPLY_SCOPE_SYSTEM; 1183 ret = 0; 1184 break; 1185 case POWER_SUPPLY_PROP_MODEL_NAME: 1186 val->strval = bdi->model_name; 1187 ret = 0; 1188 break; 1189 case POWER_SUPPLY_PROP_MANUFACTURER: 1190 val->strval = BQ24190_MANUFACTURER; 1191 ret = 0; 1192 break; 1193 default: 1194 ret = -ENODATA; 1195 } 1196 1197 pm_runtime_mark_last_busy(bdi->dev); 1198 pm_runtime_put_autosuspend(bdi->dev); 1199 1200 return ret; 1201 } 1202 1203 static int bq24190_charger_set_property(struct power_supply *psy, 1204 enum power_supply_property psp, 1205 const union power_supply_propval *val) 1206 { 1207 struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); 1208 int ret; 1209 1210 dev_dbg(bdi->dev, "prop: %d\n", psp); 1211 1212 ret = pm_runtime_resume_and_get(bdi->dev); 1213 if (ret < 0) 1214 return ret; 1215 1216 switch (psp) { 1217 case POWER_SUPPLY_PROP_ONLINE: 1218 ret = bq24190_charger_set_online(bdi, val); 1219 break; 1220 case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: 1221 ret = bq24190_charger_set_temp_alert_max(bdi, val); 1222 break; 1223 case POWER_SUPPLY_PROP_CHARGE_TYPE: 1224 ret = bq24190_charger_set_charge_type(bdi, val); 1225 break; 1226 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: 1227 ret = bq24190_charger_set_current(bdi, val); 1228 break; 1229 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: 1230 ret = bq24190_charger_set_voltage(bdi, val); 1231 break; 1232 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: 1233 ret = bq24190_charger_set_iinlimit(bdi, val); 1234 break; 1235 default: 1236 ret = -EINVAL; 1237 } 1238 1239 pm_runtime_mark_last_busy(bdi->dev); 1240 pm_runtime_put_autosuspend(bdi->dev); 1241 1242 return ret; 1243 } 1244 1245 static int bq24190_charger_property_is_writeable(struct power_supply *psy, 1246 enum power_supply_property psp) 1247 { 1248 switch (psp) { 1249 case POWER_SUPPLY_PROP_ONLINE: 1250 case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: 1251 case POWER_SUPPLY_PROP_CHARGE_TYPE: 1252 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: 1253 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: 1254 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: 1255 return 1; 1256 default: 1257 return 0; 1258 } 1259 } 1260 1261 static void bq24190_input_current_limit_work(struct work_struct *work) 1262 { 1263 struct bq24190_dev_info *bdi = 1264 container_of(work, struct bq24190_dev_info, 1265 input_current_limit_work.work); 1266 union power_supply_propval val; 1267 int ret; 1268 1269 ret = power_supply_get_property_from_supplier(bdi->charger, 1270 POWER_SUPPLY_PROP_CURRENT_MAX, 1271 &val); 1272 if (ret) 1273 return; 1274 1275 bq24190_charger_set_property(bdi->charger, 1276 POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, 1277 &val); 1278 power_supply_changed(bdi->charger); 1279 } 1280 1281 /* Sync the input-current-limit with our parent supply (if we have one) */ 1282 static void bq24190_charger_external_power_changed(struct power_supply *psy) 1283 { 1284 struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); 1285 1286 /* 1287 * The Power-Good detection may take up to 220ms, sometimes 1288 * the external charger detection is quicker, and the bq24190 will 1289 * reset to iinlim based on its own charger detection (which is not 1290 * hooked up when using external charger detection) resulting in a 1291 * too low default 500mA iinlim. Delay setting the input-current-limit 1292 * for 300ms to avoid this. 1293 */ 1294 queue_delayed_work(system_wq, &bdi->input_current_limit_work, 1295 msecs_to_jiffies(300)); 1296 } 1297 1298 static enum power_supply_property bq24190_charger_properties[] = { 1299 POWER_SUPPLY_PROP_CHARGE_TYPE, 1300 POWER_SUPPLY_PROP_HEALTH, 1301 POWER_SUPPLY_PROP_ONLINE, 1302 POWER_SUPPLY_PROP_STATUS, 1303 POWER_SUPPLY_PROP_TEMP_ALERT_MAX, 1304 POWER_SUPPLY_PROP_PRECHARGE_CURRENT, 1305 POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, 1306 POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, 1307 POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, 1308 POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, 1309 POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, 1310 POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, 1311 POWER_SUPPLY_PROP_SCOPE, 1312 POWER_SUPPLY_PROP_MODEL_NAME, 1313 POWER_SUPPLY_PROP_MANUFACTURER, 1314 }; 1315 1316 static char *bq24190_charger_supplied_to[] = { 1317 "main-battery", 1318 }; 1319 1320 static const struct power_supply_desc bq24190_charger_desc = { 1321 .name = "bq24190-charger", 1322 .type = POWER_SUPPLY_TYPE_USB, 1323 .properties = bq24190_charger_properties, 1324 .num_properties = ARRAY_SIZE(bq24190_charger_properties), 1325 .get_property = bq24190_charger_get_property, 1326 .set_property = bq24190_charger_set_property, 1327 .property_is_writeable = bq24190_charger_property_is_writeable, 1328 .external_power_changed = bq24190_charger_external_power_changed, 1329 }; 1330 1331 /* Battery power supply property routines */ 1332 1333 static int bq24190_battery_get_status(struct bq24190_dev_info *bdi, 1334 union power_supply_propval *val) 1335 { 1336 u8 ss_reg, chrg_fault; 1337 int status, ret; 1338 1339 mutex_lock(&bdi->f_reg_lock); 1340 chrg_fault = bdi->f_reg; 1341 mutex_unlock(&bdi->f_reg_lock); 1342 1343 chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK; 1344 chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT; 1345 1346 ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg); 1347 if (ret < 0) 1348 return ret; 1349 1350 /* 1351 * The battery must be discharging when any of these are true: 1352 * - there is no good power source; 1353 * - there is a charge fault. 1354 * Could also be discharging when in "supplement mode" but 1355 * there is no way to tell when its in that mode. 1356 */ 1357 if (!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK) || chrg_fault) { 1358 status = POWER_SUPPLY_STATUS_DISCHARGING; 1359 } else { 1360 ss_reg &= BQ24190_REG_SS_CHRG_STAT_MASK; 1361 ss_reg >>= BQ24190_REG_SS_CHRG_STAT_SHIFT; 1362 1363 switch (ss_reg) { 1364 case 0x0: /* Not Charging */ 1365 status = POWER_SUPPLY_STATUS_NOT_CHARGING; 1366 break; 1367 case 0x1: /* Pre-charge */ 1368 case 0x2: /* Fast Charging */ 1369 status = POWER_SUPPLY_STATUS_CHARGING; 1370 break; 1371 case 0x3: /* Charge Termination Done */ 1372 status = POWER_SUPPLY_STATUS_FULL; 1373 break; 1374 default: 1375 ret = -EIO; 1376 } 1377 } 1378 1379 if (!ret) 1380 val->intval = status; 1381 1382 return ret; 1383 } 1384 1385 static int bq24190_battery_get_health(struct bq24190_dev_info *bdi, 1386 union power_supply_propval *val) 1387 { 1388 u8 v; 1389 int health; 1390 1391 mutex_lock(&bdi->f_reg_lock); 1392 v = bdi->f_reg; 1393 mutex_unlock(&bdi->f_reg_lock); 1394 1395 if (v & BQ24190_REG_F_BAT_FAULT_MASK) { 1396 health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; 1397 } else { 1398 v &= BQ24190_REG_F_NTC_FAULT_MASK; 1399 v >>= BQ24190_REG_F_NTC_FAULT_SHIFT; 1400 1401 switch (v) { 1402 case 0x0: /* Normal */ 1403 health = POWER_SUPPLY_HEALTH_GOOD; 1404 break; 1405 case 0x1: /* TS1 Cold */ 1406 case 0x3: /* TS2 Cold */ 1407 case 0x5: /* Both Cold */ 1408 health = POWER_SUPPLY_HEALTH_COLD; 1409 break; 1410 case 0x2: /* TS1 Hot */ 1411 case 0x4: /* TS2 Hot */ 1412 case 0x6: /* Both Hot */ 1413 health = POWER_SUPPLY_HEALTH_OVERHEAT; 1414 break; 1415 default: 1416 health = POWER_SUPPLY_HEALTH_UNKNOWN; 1417 } 1418 } 1419 1420 val->intval = health; 1421 return 0; 1422 } 1423 1424 static int bq24190_battery_get_online(struct bq24190_dev_info *bdi, 1425 union power_supply_propval *val) 1426 { 1427 u8 batfet_disable; 1428 int ret; 1429 1430 ret = bq24190_read_mask(bdi, BQ24190_REG_MOC, 1431 BQ24190_REG_MOC_BATFET_DISABLE_MASK, 1432 BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable); 1433 if (ret < 0) 1434 return ret; 1435 1436 val->intval = !batfet_disable; 1437 return 0; 1438 } 1439 1440 static int bq24190_battery_set_online(struct bq24190_dev_info *bdi, 1441 const union power_supply_propval *val) 1442 { 1443 return bq24190_write_mask(bdi, BQ24190_REG_MOC, 1444 BQ24190_REG_MOC_BATFET_DISABLE_MASK, 1445 BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, !val->intval); 1446 } 1447 1448 static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi, 1449 union power_supply_propval *val) 1450 { 1451 int temp, ret; 1452 1453 ret = bq24190_get_field_val(bdi, BQ24190_REG_ICTRC, 1454 BQ24190_REG_ICTRC_TREG_MASK, 1455 BQ24190_REG_ICTRC_TREG_SHIFT, 1456 bq24190_ictrc_treg_values, 1457 ARRAY_SIZE(bq24190_ictrc_treg_values), &temp); 1458 if (ret < 0) 1459 return ret; 1460 1461 val->intval = temp; 1462 return 0; 1463 } 1464 1465 static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi, 1466 const union power_supply_propval *val) 1467 { 1468 return bq24190_set_field_val(bdi, BQ24190_REG_ICTRC, 1469 BQ24190_REG_ICTRC_TREG_MASK, 1470 BQ24190_REG_ICTRC_TREG_SHIFT, 1471 bq24190_ictrc_treg_values, 1472 ARRAY_SIZE(bq24190_ictrc_treg_values), val->intval); 1473 } 1474 1475 static int bq24190_battery_get_property(struct power_supply *psy, 1476 enum power_supply_property psp, union power_supply_propval *val) 1477 { 1478 struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); 1479 int ret; 1480 1481 dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n"); 1482 dev_dbg(bdi->dev, "prop: %d\n", psp); 1483 1484 ret = pm_runtime_resume_and_get(bdi->dev); 1485 if (ret < 0) 1486 return ret; 1487 1488 switch (psp) { 1489 case POWER_SUPPLY_PROP_STATUS: 1490 ret = bq24190_battery_get_status(bdi, val); 1491 break; 1492 case POWER_SUPPLY_PROP_HEALTH: 1493 ret = bq24190_battery_get_health(bdi, val); 1494 break; 1495 case POWER_SUPPLY_PROP_ONLINE: 1496 ret = bq24190_battery_get_online(bdi, val); 1497 break; 1498 case POWER_SUPPLY_PROP_TECHNOLOGY: 1499 /* Could be Li-on or Li-polymer but no way to tell which */ 1500 val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; 1501 ret = 0; 1502 break; 1503 case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: 1504 ret = bq24190_battery_get_temp_alert_max(bdi, val); 1505 break; 1506 case POWER_SUPPLY_PROP_SCOPE: 1507 val->intval = POWER_SUPPLY_SCOPE_SYSTEM; 1508 ret = 0; 1509 break; 1510 default: 1511 ret = -ENODATA; 1512 } 1513 1514 pm_runtime_mark_last_busy(bdi->dev); 1515 pm_runtime_put_autosuspend(bdi->dev); 1516 1517 return ret; 1518 } 1519 1520 static int bq24190_battery_set_property(struct power_supply *psy, 1521 enum power_supply_property psp, 1522 const union power_supply_propval *val) 1523 { 1524 struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); 1525 int ret; 1526 1527 dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n"); 1528 dev_dbg(bdi->dev, "prop: %d\n", psp); 1529 1530 ret = pm_runtime_resume_and_get(bdi->dev); 1531 if (ret < 0) 1532 return ret; 1533 1534 switch (psp) { 1535 case POWER_SUPPLY_PROP_ONLINE: 1536 ret = bq24190_battery_set_online(bdi, val); 1537 break; 1538 case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: 1539 ret = bq24190_battery_set_temp_alert_max(bdi, val); 1540 break; 1541 default: 1542 ret = -EINVAL; 1543 } 1544 1545 pm_runtime_mark_last_busy(bdi->dev); 1546 pm_runtime_put_autosuspend(bdi->dev); 1547 1548 return ret; 1549 } 1550 1551 static int bq24190_battery_property_is_writeable(struct power_supply *psy, 1552 enum power_supply_property psp) 1553 { 1554 int ret; 1555 1556 switch (psp) { 1557 case POWER_SUPPLY_PROP_ONLINE: 1558 case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: 1559 ret = 1; 1560 break; 1561 default: 1562 ret = 0; 1563 } 1564 1565 return ret; 1566 } 1567 1568 static enum power_supply_property bq24190_battery_properties[] = { 1569 POWER_SUPPLY_PROP_STATUS, 1570 POWER_SUPPLY_PROP_HEALTH, 1571 POWER_SUPPLY_PROP_ONLINE, 1572 POWER_SUPPLY_PROP_TECHNOLOGY, 1573 POWER_SUPPLY_PROP_TEMP_ALERT_MAX, 1574 POWER_SUPPLY_PROP_SCOPE, 1575 }; 1576 1577 static const struct power_supply_desc bq24190_battery_desc = { 1578 .name = "bq24190-battery", 1579 .type = POWER_SUPPLY_TYPE_BATTERY, 1580 .properties = bq24190_battery_properties, 1581 .num_properties = ARRAY_SIZE(bq24190_battery_properties), 1582 .get_property = bq24190_battery_get_property, 1583 .set_property = bq24190_battery_set_property, 1584 .property_is_writeable = bq24190_battery_property_is_writeable, 1585 }; 1586 1587 static int bq24190_configure_usb_otg(struct bq24190_dev_info *bdi, u8 ss_reg) 1588 { 1589 bool otg_enabled; 1590 int ret; 1591 1592 otg_enabled = !!(ss_reg & BQ24190_REG_SS_VBUS_STAT_MASK); 1593 ret = extcon_set_state_sync(bdi->edev, EXTCON_USB, otg_enabled); 1594 if (ret < 0) 1595 dev_err(bdi->dev, "Can't set extcon state to %d: %d\n", 1596 otg_enabled, ret); 1597 1598 return ret; 1599 } 1600 1601 static void bq24190_check_status(struct bq24190_dev_info *bdi) 1602 { 1603 const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK; 1604 const u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK 1605 | BQ24190_REG_F_NTC_FAULT_MASK; 1606 bool alert_charger = false, alert_battery = false; 1607 u8 ss_reg = 0, f_reg = 0; 1608 int i, ret; 1609 1610 ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg); 1611 if (ret < 0) { 1612 dev_err(bdi->dev, "Can't read SS reg: %d\n", ret); 1613 return; 1614 } 1615 1616 i = 0; 1617 do { 1618 ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg); 1619 if (ret < 0) { 1620 dev_err(bdi->dev, "Can't read F reg: %d\n", ret); 1621 return; 1622 } 1623 } while (f_reg && ++i < 2); 1624 1625 /* ignore over/under voltage fault after disconnect */ 1626 if (f_reg == (1 << BQ24190_REG_F_CHRG_FAULT_SHIFT) && 1627 !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) 1628 f_reg = 0; 1629 1630 if (f_reg != bdi->f_reg) { 1631 dev_warn(bdi->dev, 1632 "Fault: boost %d, charge %d, battery %d, ntc %d\n", 1633 !!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK), 1634 !!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK), 1635 !!(f_reg & BQ24190_REG_F_BAT_FAULT_MASK), 1636 !!(f_reg & BQ24190_REG_F_NTC_FAULT_MASK)); 1637 1638 mutex_lock(&bdi->f_reg_lock); 1639 if ((bdi->f_reg & battery_mask_f) != (f_reg & battery_mask_f)) 1640 alert_battery = true; 1641 if ((bdi->f_reg & ~battery_mask_f) != (f_reg & ~battery_mask_f)) 1642 alert_charger = true; 1643 bdi->f_reg = f_reg; 1644 mutex_unlock(&bdi->f_reg_lock); 1645 } 1646 1647 if (ss_reg != bdi->ss_reg) { 1648 /* 1649 * The device is in host mode so when PG_STAT goes from 1->0 1650 * (i.e., power removed) HIZ needs to be disabled. 1651 */ 1652 if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) && 1653 !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) { 1654 ret = bq24190_write_mask(bdi, BQ24190_REG_ISC, 1655 BQ24190_REG_ISC_EN_HIZ_MASK, 1656 BQ24190_REG_ISC_EN_HIZ_SHIFT, 1657 0); 1658 if (ret < 0) 1659 dev_err(bdi->dev, "Can't access ISC reg: %d\n", 1660 ret); 1661 } 1662 1663 if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss)) 1664 alert_battery = true; 1665 if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss)) 1666 alert_charger = true; 1667 bdi->ss_reg = ss_reg; 1668 } 1669 1670 if (alert_charger || alert_battery) { 1671 power_supply_changed(bdi->charger); 1672 bq24190_configure_usb_otg(bdi, ss_reg); 1673 } 1674 if (alert_battery && bdi->battery) 1675 power_supply_changed(bdi->battery); 1676 1677 dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg); 1678 } 1679 1680 static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) 1681 { 1682 struct bq24190_dev_info *bdi = data; 1683 int error; 1684 1685 bdi->irq_event = true; 1686 error = pm_runtime_resume_and_get(bdi->dev); 1687 if (error < 0) { 1688 dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); 1689 return IRQ_NONE; 1690 } 1691 bq24190_check_status(bdi); 1692 pm_runtime_mark_last_busy(bdi->dev); 1693 pm_runtime_put_autosuspend(bdi->dev); 1694 bdi->irq_event = false; 1695 1696 return IRQ_HANDLED; 1697 } 1698 1699 static int bq24190_hw_init(struct bq24190_dev_info *bdi) 1700 { 1701 u8 v; 1702 int ret; 1703 1704 /* First check that the device really is what its supposed to be */ 1705 ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS, 1706 BQ24190_REG_VPRS_PN_MASK, 1707 BQ24190_REG_VPRS_PN_SHIFT, 1708 &v); 1709 if (ret < 0) 1710 return ret; 1711 1712 switch (v) { 1713 case BQ24190_REG_VPRS_PN_24190: 1714 case BQ24190_REG_VPRS_PN_24192: 1715 case BQ24190_REG_VPRS_PN_24192I: 1716 break; 1717 default: 1718 dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v); 1719 return -ENODEV; 1720 } 1721 1722 ret = bq24190_register_reset(bdi); 1723 if (ret < 0) 1724 return ret; 1725 1726 ret = bq24190_set_config(bdi); 1727 if (ret < 0) 1728 return ret; 1729 1730 return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg); 1731 } 1732 1733 static int bq24190_get_config(struct bq24190_dev_info *bdi) 1734 { 1735 const char * const s = "ti,system-minimum-microvolt"; 1736 struct power_supply_battery_info *info; 1737 int v, idx; 1738 1739 idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1; 1740 bdi->ichg_max = bq24190_ccc_ichg_values[idx]; 1741 1742 idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1; 1743 bdi->vreg_max = bq24190_cvc_vreg_values[idx]; 1744 1745 if (device_property_read_u32(bdi->dev, s, &v) == 0) { 1746 v /= 1000; 1747 if (v >= BQ24190_REG_POC_SYS_MIN_MIN 1748 && v <= BQ24190_REG_POC_SYS_MIN_MAX) 1749 bdi->sys_min = v; 1750 else 1751 dev_warn(bdi->dev, "invalid value for %s: %u\n", s, v); 1752 } 1753 1754 if (!power_supply_get_battery_info(bdi->charger, &info)) { 1755 v = info->precharge_current_ua / 1000; 1756 if (v >= BQ24190_REG_PCTCC_IPRECHG_MIN 1757 && v <= BQ24190_REG_PCTCC_IPRECHG_MAX) 1758 bdi->iprechg = v; 1759 else 1760 dev_warn(bdi->dev, "invalid value for battery:precharge-current-microamp: %d\n", 1761 v); 1762 1763 v = info->charge_term_current_ua / 1000; 1764 if (v >= BQ24190_REG_PCTCC_ITERM_MIN 1765 && v <= BQ24190_REG_PCTCC_ITERM_MAX) 1766 bdi->iterm = v; 1767 else 1768 dev_warn(bdi->dev, "invalid value for battery:charge-term-current-microamp: %d\n", 1769 v); 1770 1771 /* These are optional, so no warning when not set */ 1772 v = info->constant_charge_current_max_ua; 1773 if (v >= bq24190_ccc_ichg_values[0] && v <= bdi->ichg_max) 1774 bdi->ichg = bdi->ichg_max = v; 1775 1776 v = info->constant_charge_voltage_max_uv; 1777 if (v >= bq24190_cvc_vreg_values[0] && v <= bdi->vreg_max) 1778 bdi->vreg = bdi->vreg_max = v; 1779 } 1780 1781 return 0; 1782 } 1783 1784 static int bq24190_probe(struct i2c_client *client) 1785 { 1786 const struct i2c_device_id *id = i2c_client_get_device_id(client); 1787 struct i2c_adapter *adapter = client->adapter; 1788 struct device *dev = &client->dev; 1789 struct power_supply_config charger_cfg = {}, battery_cfg = {}; 1790 struct bq24190_dev_info *bdi; 1791 int ret; 1792 1793 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { 1794 dev_err(dev, "No support for SMBUS_BYTE_DATA\n"); 1795 return -ENODEV; 1796 } 1797 1798 bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL); 1799 if (!bdi) { 1800 dev_err(dev, "Can't alloc bdi struct\n"); 1801 return -ENOMEM; 1802 } 1803 1804 bdi->client = client; 1805 bdi->dev = dev; 1806 strncpy(bdi->model_name, id->name, I2C_NAME_SIZE); 1807 mutex_init(&bdi->f_reg_lock); 1808 bdi->charge_type = POWER_SUPPLY_CHARGE_TYPE_FAST; 1809 bdi->f_reg = 0; 1810 bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */ 1811 INIT_DELAYED_WORK(&bdi->input_current_limit_work, 1812 bq24190_input_current_limit_work); 1813 1814 i2c_set_clientdata(client, bdi); 1815 1816 if (client->irq <= 0) { 1817 dev_err(dev, "Can't get irq info\n"); 1818 return -EINVAL; 1819 } 1820 1821 bdi->edev = devm_extcon_dev_allocate(dev, bq24190_usb_extcon_cable); 1822 if (IS_ERR(bdi->edev)) 1823 return PTR_ERR(bdi->edev); 1824 1825 ret = devm_extcon_dev_register(dev, bdi->edev); 1826 if (ret < 0) 1827 return ret; 1828 1829 pm_runtime_enable(dev); 1830 pm_runtime_use_autosuspend(dev); 1831 pm_runtime_set_autosuspend_delay(dev, 600); 1832 ret = pm_runtime_get_sync(dev); 1833 if (ret < 0) { 1834 dev_err(dev, "pm_runtime_get failed: %i\n", ret); 1835 goto out_pmrt; 1836 } 1837 1838 #ifdef CONFIG_SYSFS 1839 bq24190_sysfs_init_attrs(); 1840 charger_cfg.attr_grp = bq24190_sysfs_groups; 1841 #endif 1842 1843 charger_cfg.drv_data = bdi; 1844 charger_cfg.of_node = dev->of_node; 1845 charger_cfg.supplied_to = bq24190_charger_supplied_to; 1846 charger_cfg.num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to); 1847 bdi->charger = power_supply_register(dev, &bq24190_charger_desc, 1848 &charger_cfg); 1849 if (IS_ERR(bdi->charger)) { 1850 dev_err(dev, "Can't register charger\n"); 1851 ret = PTR_ERR(bdi->charger); 1852 goto out_pmrt; 1853 } 1854 1855 /* the battery class is deprecated and will be removed. */ 1856 /* in the interim, this property hides it. */ 1857 if (!device_property_read_bool(dev, "omit-battery-class")) { 1858 battery_cfg.drv_data = bdi; 1859 bdi->battery = power_supply_register(dev, &bq24190_battery_desc, 1860 &battery_cfg); 1861 if (IS_ERR(bdi->battery)) { 1862 dev_err(dev, "Can't register battery\n"); 1863 ret = PTR_ERR(bdi->battery); 1864 goto out_charger; 1865 } 1866 } 1867 1868 ret = bq24190_get_config(bdi); 1869 if (ret < 0) { 1870 dev_err(dev, "Can't get devicetree config\n"); 1871 goto out_charger; 1872 } 1873 1874 ret = bq24190_hw_init(bdi); 1875 if (ret < 0) { 1876 dev_err(dev, "Hardware init failed\n"); 1877 goto out_charger; 1878 } 1879 1880 ret = bq24190_configure_usb_otg(bdi, bdi->ss_reg); 1881 if (ret < 0) 1882 goto out_charger; 1883 1884 bdi->initialized = true; 1885 1886 ret = devm_request_threaded_irq(dev, client->irq, NULL, 1887 bq24190_irq_handler_thread, 1888 IRQF_TRIGGER_FALLING | IRQF_ONESHOT, 1889 "bq24190-charger", bdi); 1890 if (ret < 0) { 1891 dev_err(dev, "Can't set up irq handler\n"); 1892 goto out_charger; 1893 } 1894 1895 ret = bq24190_register_vbus_regulator(bdi); 1896 if (ret < 0) 1897 goto out_charger; 1898 1899 enable_irq_wake(client->irq); 1900 1901 pm_runtime_mark_last_busy(dev); 1902 pm_runtime_put_autosuspend(dev); 1903 1904 return 0; 1905 1906 out_charger: 1907 if (!IS_ERR_OR_NULL(bdi->battery)) 1908 power_supply_unregister(bdi->battery); 1909 power_supply_unregister(bdi->charger); 1910 1911 out_pmrt: 1912 pm_runtime_put_sync(dev); 1913 pm_runtime_dont_use_autosuspend(dev); 1914 pm_runtime_disable(dev); 1915 return ret; 1916 } 1917 1918 static void bq24190_remove(struct i2c_client *client) 1919 { 1920 struct bq24190_dev_info *bdi = i2c_get_clientdata(client); 1921 int error; 1922 1923 cancel_delayed_work_sync(&bdi->input_current_limit_work); 1924 error = pm_runtime_resume_and_get(bdi->dev); 1925 if (error < 0) 1926 dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); 1927 1928 bq24190_register_reset(bdi); 1929 if (bdi->battery) 1930 power_supply_unregister(bdi->battery); 1931 power_supply_unregister(bdi->charger); 1932 if (error >= 0) 1933 pm_runtime_put_sync(bdi->dev); 1934 pm_runtime_dont_use_autosuspend(bdi->dev); 1935 pm_runtime_disable(bdi->dev); 1936 } 1937 1938 static void bq24190_shutdown(struct i2c_client *client) 1939 { 1940 struct bq24190_dev_info *bdi = i2c_get_clientdata(client); 1941 1942 /* Turn off 5V boost regulator on shutdown */ 1943 bq24190_set_otg_vbus(bdi, false); 1944 } 1945 1946 static __maybe_unused int bq24190_runtime_suspend(struct device *dev) 1947 { 1948 struct i2c_client *client = to_i2c_client(dev); 1949 struct bq24190_dev_info *bdi = i2c_get_clientdata(client); 1950 1951 if (!bdi->initialized) 1952 return 0; 1953 1954 dev_dbg(bdi->dev, "%s\n", __func__); 1955 1956 return 0; 1957 } 1958 1959 static __maybe_unused int bq24190_runtime_resume(struct device *dev) 1960 { 1961 struct i2c_client *client = to_i2c_client(dev); 1962 struct bq24190_dev_info *bdi = i2c_get_clientdata(client); 1963 1964 if (!bdi->initialized) 1965 return 0; 1966 1967 if (!bdi->irq_event) { 1968 dev_dbg(bdi->dev, "checking events on possible wakeirq\n"); 1969 bq24190_check_status(bdi); 1970 } 1971 1972 return 0; 1973 } 1974 1975 static __maybe_unused int bq24190_pm_suspend(struct device *dev) 1976 { 1977 struct i2c_client *client = to_i2c_client(dev); 1978 struct bq24190_dev_info *bdi = i2c_get_clientdata(client); 1979 int error; 1980 1981 error = pm_runtime_resume_and_get(bdi->dev); 1982 if (error < 0) 1983 dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); 1984 1985 bq24190_register_reset(bdi); 1986 1987 if (error >= 0) { 1988 pm_runtime_mark_last_busy(bdi->dev); 1989 pm_runtime_put_autosuspend(bdi->dev); 1990 } 1991 1992 return 0; 1993 } 1994 1995 static __maybe_unused int bq24190_pm_resume(struct device *dev) 1996 { 1997 struct i2c_client *client = to_i2c_client(dev); 1998 struct bq24190_dev_info *bdi = i2c_get_clientdata(client); 1999 int error; 2000 2001 bdi->f_reg = 0; 2002 bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */ 2003 2004 error = pm_runtime_resume_and_get(bdi->dev); 2005 if (error < 0) 2006 dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); 2007 2008 bq24190_register_reset(bdi); 2009 bq24190_set_config(bdi); 2010 bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg); 2011 2012 if (error >= 0) { 2013 pm_runtime_mark_last_busy(bdi->dev); 2014 pm_runtime_put_autosuspend(bdi->dev); 2015 } 2016 2017 /* Things may have changed while suspended so alert upper layer */ 2018 power_supply_changed(bdi->charger); 2019 if (bdi->battery) 2020 power_supply_changed(bdi->battery); 2021 2022 return 0; 2023 } 2024 2025 static const struct dev_pm_ops bq24190_pm_ops = { 2026 SET_RUNTIME_PM_OPS(bq24190_runtime_suspend, bq24190_runtime_resume, 2027 NULL) 2028 SET_SYSTEM_SLEEP_PM_OPS(bq24190_pm_suspend, bq24190_pm_resume) 2029 }; 2030 2031 static const struct i2c_device_id bq24190_i2c_ids[] = { 2032 { "bq24190" }, 2033 { "bq24192" }, 2034 { "bq24192i" }, 2035 { "bq24196" }, 2036 { }, 2037 }; 2038 MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids); 2039 2040 static const struct of_device_id bq24190_of_match[] = { 2041 { .compatible = "ti,bq24190", }, 2042 { .compatible = "ti,bq24192", }, 2043 { .compatible = "ti,bq24192i", }, 2044 { .compatible = "ti,bq24196", }, 2045 { }, 2046 }; 2047 MODULE_DEVICE_TABLE(of, bq24190_of_match); 2048 2049 static struct i2c_driver bq24190_driver = { 2050 .probe = bq24190_probe, 2051 .remove = bq24190_remove, 2052 .shutdown = bq24190_shutdown, 2053 .id_table = bq24190_i2c_ids, 2054 .driver = { 2055 .name = "bq24190-charger", 2056 .pm = &bq24190_pm_ops, 2057 .of_match_table = bq24190_of_match, 2058 }, 2059 }; 2060 module_i2c_driver(bq24190_driver); 2061 2062 MODULE_LICENSE("GPL"); 2063 MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>"); 2064 MODULE_DESCRIPTION("TI BQ24190 Charger Driver"); 2065