1 /*
2  * Battery power supply driver for X-Powers AXP20X and AXP22X PMICs
3  *
4  * Copyright 2016 Free Electrons NextThing Co.
5  *	Quentin Schulz <quentin.schulz@free-electrons.com>
6  *
7  * This driver is based on a previous upstreaming attempt by:
8  *	Bruno Prémont <bonbons@linux-vserver.org>
9  *
10  * This file is subject to the terms and conditions of the GNU General
11  * Public License. See the file "COPYING" in the main directory of this
12  * archive for more details.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17  * GNU General Public License for more details.
18  */
19 
20 #include <linux/err.h>
21 #include <linux/interrupt.h>
22 #include <linux/irq.h>
23 #include <linux/module.h>
24 #include <linux/of.h>
25 #include <linux/platform_device.h>
26 #include <linux/power_supply.h>
27 #include <linux/regmap.h>
28 #include <linux/slab.h>
29 #include <linux/time.h>
30 #include <linux/iio/iio.h>
31 #include <linux/iio/consumer.h>
32 #include <linux/mfd/axp20x.h>
33 
34 #define AXP20X_PWR_STATUS_BAT_CHARGING	BIT(2)
35 
36 #define AXP20X_PWR_OP_BATT_PRESENT	BIT(5)
37 #define AXP20X_PWR_OP_BATT_ACTIVATED	BIT(3)
38 
39 #define AXP209_FG_PERCENT		GENMASK(6, 0)
40 #define AXP22X_FG_VALID			BIT(7)
41 
42 #define AXP20X_CHRG_CTRL1_ENABLE	BIT(7)
43 #define AXP20X_CHRG_CTRL1_TGT_VOLT	GENMASK(6, 5)
44 #define AXP20X_CHRG_CTRL1_TGT_4_1V	(0 << 5)
45 #define AXP20X_CHRG_CTRL1_TGT_4_15V	(1 << 5)
46 #define AXP20X_CHRG_CTRL1_TGT_4_2V	(2 << 5)
47 #define AXP20X_CHRG_CTRL1_TGT_4_36V	(3 << 5)
48 
49 #define AXP22X_CHRG_CTRL1_TGT_4_22V	(1 << 5)
50 #define AXP22X_CHRG_CTRL1_TGT_4_24V	(3 << 5)
51 
52 #define AXP813_CHRG_CTRL1_TGT_4_35V	(3 << 5)
53 
54 #define AXP20X_CHRG_CTRL1_TGT_CURR	GENMASK(3, 0)
55 
56 #define AXP20X_V_OFF_MASK		GENMASK(2, 0)
57 
58 struct axp20x_batt_ps;
59 
60 struct axp_data {
61 	int	ccc_scale;
62 	int	ccc_offset;
63 	bool	has_fg_valid;
64 	int	(*get_max_voltage)(struct axp20x_batt_ps *batt, int *val);
65 	int	(*set_max_voltage)(struct axp20x_batt_ps *batt, int val);
66 };
67 
68 struct axp20x_batt_ps {
69 	struct regmap *regmap;
70 	struct power_supply *batt;
71 	struct device *dev;
72 	struct iio_channel *batt_chrg_i;
73 	struct iio_channel *batt_dischrg_i;
74 	struct iio_channel *batt_v;
75 	/* Maximum constant charge current */
76 	unsigned int max_ccc;
77 	const struct axp_data	*data;
78 };
79 
80 static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
81 					  int *val)
82 {
83 	int ret, reg;
84 
85 	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
86 	if (ret)
87 		return ret;
88 
89 	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
90 	case AXP20X_CHRG_CTRL1_TGT_4_1V:
91 		*val = 4100000;
92 		break;
93 	case AXP20X_CHRG_CTRL1_TGT_4_15V:
94 		*val = 4150000;
95 		break;
96 	case AXP20X_CHRG_CTRL1_TGT_4_2V:
97 		*val = 4200000;
98 		break;
99 	case AXP20X_CHRG_CTRL1_TGT_4_36V:
100 		*val = 4360000;
101 		break;
102 	default:
103 		return -EINVAL;
104 	}
105 
106 	return 0;
107 }
108 
109 static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
110 					  int *val)
111 {
112 	int ret, reg;
113 
114 	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
115 	if (ret)
116 		return ret;
117 
118 	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
119 	case AXP20X_CHRG_CTRL1_TGT_4_1V:
120 		*val = 4100000;
121 		break;
122 	case AXP20X_CHRG_CTRL1_TGT_4_2V:
123 		*val = 4200000;
124 		break;
125 	case AXP22X_CHRG_CTRL1_TGT_4_22V:
126 		*val = 4220000;
127 		break;
128 	case AXP22X_CHRG_CTRL1_TGT_4_24V:
129 		*val = 4240000;
130 		break;
131 	default:
132 		return -EINVAL;
133 	}
134 
135 	return 0;
136 }
137 
138 static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
139 					  int *val)
140 {
141 	int ret, reg;
142 
143 	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
144 	if (ret)
145 		return ret;
146 
147 	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
148 	case AXP20X_CHRG_CTRL1_TGT_4_1V:
149 		*val = 4100000;
150 		break;
151 	case AXP20X_CHRG_CTRL1_TGT_4_15V:
152 		*val = 4150000;
153 		break;
154 	case AXP20X_CHRG_CTRL1_TGT_4_2V:
155 		*val = 4200000;
156 		break;
157 	case AXP813_CHRG_CTRL1_TGT_4_35V:
158 		*val = 4350000;
159 		break;
160 	default:
161 		return -EINVAL;
162 	}
163 
164 	return 0;
165 }
166 
167 static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
168 					      int *val)
169 {
170 	int ret;
171 
172 	ret = regmap_read(axp->regmap, AXP20X_CHRG_CTRL1, val);
173 	if (ret)
174 		return ret;
175 
176 	*val &= AXP20X_CHRG_CTRL1_TGT_CURR;
177 
178 	*val = *val * axp->data->ccc_scale + axp->data->ccc_offset;
179 
180 	return 0;
181 }
182 
183 static int axp20x_battery_get_prop(struct power_supply *psy,
184 				   enum power_supply_property psp,
185 				   union power_supply_propval *val)
186 {
187 	struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
188 	int ret = 0, reg, val1;
189 
190 	switch (psp) {
191 	case POWER_SUPPLY_PROP_PRESENT:
192 	case POWER_SUPPLY_PROP_ONLINE:
193 		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
194 				  &reg);
195 		if (ret)
196 			return ret;
197 
198 		val->intval = !!(reg & AXP20X_PWR_OP_BATT_PRESENT);
199 		break;
200 
201 	case POWER_SUPPLY_PROP_STATUS:
202 		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
203 				  &reg);
204 		if (ret)
205 			return ret;
206 
207 		if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) {
208 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
209 			return 0;
210 		}
211 
212 		ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i,
213 						 &val1);
214 		if (ret)
215 			return ret;
216 
217 		if (val1) {
218 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
219 			return 0;
220 		}
221 
222 		ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &val1);
223 		if (ret)
224 			return ret;
225 
226 		/*
227 		 * Fuel Gauge data takes 7 bits but the stored value seems to be
228 		 * directly the raw percentage without any scaling to 7 bits.
229 		 */
230 		if ((val1 & AXP209_FG_PERCENT) == 100)
231 			val->intval = POWER_SUPPLY_STATUS_FULL;
232 		else
233 			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
234 		break;
235 
236 	case POWER_SUPPLY_PROP_HEALTH:
237 		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
238 				  &val1);
239 		if (ret)
240 			return ret;
241 
242 		if (val1 & AXP20X_PWR_OP_BATT_ACTIVATED) {
243 			val->intval = POWER_SUPPLY_HEALTH_DEAD;
244 			return 0;
245 		}
246 
247 		val->intval = POWER_SUPPLY_HEALTH_GOOD;
248 		break;
249 
250 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
251 		ret = axp20x_get_constant_charge_current(axp20x_batt,
252 							 &val->intval);
253 		if (ret)
254 			return ret;
255 		break;
256 
257 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
258 		val->intval = axp20x_batt->max_ccc;
259 		break;
260 
261 	case POWER_SUPPLY_PROP_CURRENT_NOW:
262 		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
263 				  &reg);
264 		if (ret)
265 			return ret;
266 
267 		if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) {
268 			ret = iio_read_channel_processed(axp20x_batt->batt_chrg_i, &val->intval);
269 		} else {
270 			ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i, &val1);
271 			val->intval = -val1;
272 		}
273 		if (ret)
274 			return ret;
275 
276 		/* IIO framework gives mA but Power Supply framework gives uA */
277 		val->intval *= 1000;
278 		break;
279 
280 	case POWER_SUPPLY_PROP_CAPACITY:
281 		/* When no battery is present, return capacity is 100% */
282 		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
283 				  &reg);
284 		if (ret)
285 			return ret;
286 
287 		if (!(reg & AXP20X_PWR_OP_BATT_PRESENT)) {
288 			val->intval = 100;
289 			return 0;
290 		}
291 
292 		ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &reg);
293 		if (ret)
294 			return ret;
295 
296 		if (axp20x_batt->data->has_fg_valid && !(reg & AXP22X_FG_VALID))
297 			return -EINVAL;
298 
299 		/*
300 		 * Fuel Gauge data takes 7 bits but the stored value seems to be
301 		 * directly the raw percentage without any scaling to 7 bits.
302 		 */
303 		val->intval = reg & AXP209_FG_PERCENT;
304 		break;
305 
306 	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
307 		return axp20x_batt->data->get_max_voltage(axp20x_batt,
308 							  &val->intval);
309 
310 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
311 		ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, &reg);
312 		if (ret)
313 			return ret;
314 
315 		val->intval = 2600000 + 100000 * (reg & AXP20X_V_OFF_MASK);
316 		break;
317 
318 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
319 		ret = iio_read_channel_processed(axp20x_batt->batt_v,
320 						 &val->intval);
321 		if (ret)
322 			return ret;
323 
324 		/* IIO framework gives mV but Power Supply framework gives uV */
325 		val->intval *= 1000;
326 		break;
327 
328 	default:
329 		return -EINVAL;
330 	}
331 
332 	return 0;
333 }
334 
335 static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
336 					  int val)
337 {
338 	switch (val) {
339 	case 4100000:
340 		val = AXP20X_CHRG_CTRL1_TGT_4_1V;
341 		break;
342 
343 	case 4200000:
344 		val = AXP20X_CHRG_CTRL1_TGT_4_2V;
345 		break;
346 
347 	default:
348 		/*
349 		 * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
350 		 * can be set to 4.22V and 4.24V, but these voltages are too
351 		 * high for Lithium based batteries (AXP PMICs are supposed to
352 		 * be used with these kinds of battery).
353 		 */
354 		return -EINVAL;
355 	}
356 
357 	return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
358 				  AXP20X_CHRG_CTRL1_TGT_VOLT, val);
359 }
360 
361 static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
362 					  int val)
363 {
364 	switch (val) {
365 	case 4100000:
366 		val = AXP20X_CHRG_CTRL1_TGT_4_1V;
367 		break;
368 
369 	case 4150000:
370 		val = AXP20X_CHRG_CTRL1_TGT_4_15V;
371 		break;
372 
373 	case 4200000:
374 		val = AXP20X_CHRG_CTRL1_TGT_4_2V;
375 		break;
376 
377 	default:
378 		/*
379 		 * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
380 		 * can be set to 4.22V and 4.24V, but these voltages are too
381 		 * high for Lithium based batteries (AXP PMICs are supposed to
382 		 * be used with these kinds of battery).
383 		 */
384 		return -EINVAL;
385 	}
386 
387 	return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
388 				  AXP20X_CHRG_CTRL1_TGT_VOLT, val);
389 }
390 
391 static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt,
392 					      int charge_current)
393 {
394 	if (charge_current > axp_batt->max_ccc)
395 		return -EINVAL;
396 
397 	charge_current = (charge_current - axp_batt->data->ccc_offset) /
398 		axp_batt->data->ccc_scale;
399 
400 	if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
401 		return -EINVAL;
402 
403 	return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1,
404 				  AXP20X_CHRG_CTRL1_TGT_CURR, charge_current);
405 }
406 
407 static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp,
408 						  int charge_current)
409 {
410 	bool lower_max = false;
411 
412 	charge_current = (charge_current - axp->data->ccc_offset) /
413 		axp->data->ccc_scale;
414 
415 	if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
416 		return -EINVAL;
417 
418 	charge_current = charge_current * axp->data->ccc_scale +
419 		axp->data->ccc_offset;
420 
421 	if (charge_current > axp->max_ccc)
422 		dev_warn(axp->dev,
423 			 "Setting max constant charge current higher than previously defined. Note that increasing the constant charge current may damage your battery.\n");
424 	else
425 		lower_max = true;
426 
427 	axp->max_ccc = charge_current;
428 
429 	if (lower_max) {
430 		int current_cc;
431 
432 		axp20x_get_constant_charge_current(axp, &current_cc);
433 		if (current_cc > charge_current)
434 			axp20x_set_constant_charge_current(axp, charge_current);
435 	}
436 
437 	return 0;
438 }
439 static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt,
440 					 int min_voltage)
441 {
442 	int val1 = (min_voltage - 2600000) / 100000;
443 
444 	if (val1 < 0 || val1 > AXP20X_V_OFF_MASK)
445 		return -EINVAL;
446 
447 	return regmap_update_bits(axp_batt->regmap, AXP20X_V_OFF,
448 				  AXP20X_V_OFF_MASK, val1);
449 }
450 
451 static int axp20x_battery_set_prop(struct power_supply *psy,
452 				   enum power_supply_property psp,
453 				   const union power_supply_propval *val)
454 {
455 	struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
456 
457 	switch (psp) {
458 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
459 		return axp20x_set_voltage_min_design(axp20x_batt, val->intval);
460 
461 	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
462 		return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval);
463 
464 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
465 		return axp20x_set_constant_charge_current(axp20x_batt,
466 							  val->intval);
467 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
468 		return axp20x_set_max_constant_charge_current(axp20x_batt,
469 							      val->intval);
470 	case POWER_SUPPLY_PROP_STATUS:
471 		switch (val->intval) {
472 		case POWER_SUPPLY_STATUS_CHARGING:
473 			return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
474 				AXP20X_CHRG_CTRL1_ENABLE, AXP20X_CHRG_CTRL1_ENABLE);
475 
476 		case POWER_SUPPLY_STATUS_DISCHARGING:
477 		case POWER_SUPPLY_STATUS_NOT_CHARGING:
478 			return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
479 				AXP20X_CHRG_CTRL1_ENABLE, 0);
480 		}
481 		fallthrough;
482 	default:
483 		return -EINVAL;
484 	}
485 }
486 
487 static enum power_supply_property axp20x_battery_props[] = {
488 	POWER_SUPPLY_PROP_PRESENT,
489 	POWER_SUPPLY_PROP_ONLINE,
490 	POWER_SUPPLY_PROP_STATUS,
491 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
492 	POWER_SUPPLY_PROP_CURRENT_NOW,
493 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
494 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
495 	POWER_SUPPLY_PROP_HEALTH,
496 	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
497 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
498 	POWER_SUPPLY_PROP_CAPACITY,
499 };
500 
501 static int axp20x_battery_prop_writeable(struct power_supply *psy,
502 					 enum power_supply_property psp)
503 {
504 	return psp == POWER_SUPPLY_PROP_STATUS ||
505 	       psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN ||
506 	       psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN ||
507 	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT ||
508 	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
509 }
510 
511 static const struct power_supply_desc axp20x_batt_ps_desc = {
512 	.name = "axp20x-battery",
513 	.type = POWER_SUPPLY_TYPE_BATTERY,
514 	.properties = axp20x_battery_props,
515 	.num_properties = ARRAY_SIZE(axp20x_battery_props),
516 	.property_is_writeable = axp20x_battery_prop_writeable,
517 	.get_property = axp20x_battery_get_prop,
518 	.set_property = axp20x_battery_set_prop,
519 };
520 
521 static const struct axp_data axp209_data = {
522 	.ccc_scale = 100000,
523 	.ccc_offset = 300000,
524 	.get_max_voltage = axp20x_battery_get_max_voltage,
525 	.set_max_voltage = axp20x_battery_set_max_voltage,
526 };
527 
528 static const struct axp_data axp221_data = {
529 	.ccc_scale = 150000,
530 	.ccc_offset = 300000,
531 	.has_fg_valid = true,
532 	.get_max_voltage = axp22x_battery_get_max_voltage,
533 	.set_max_voltage = axp22x_battery_set_max_voltage,
534 };
535 
536 static const struct axp_data axp813_data = {
537 	.ccc_scale = 200000,
538 	.ccc_offset = 200000,
539 	.has_fg_valid = true,
540 	.get_max_voltage = axp813_battery_get_max_voltage,
541 	.set_max_voltage = axp20x_battery_set_max_voltage,
542 };
543 
544 static const struct of_device_id axp20x_battery_ps_id[] = {
545 	{
546 		.compatible = "x-powers,axp209-battery-power-supply",
547 		.data = (void *)&axp209_data,
548 	}, {
549 		.compatible = "x-powers,axp221-battery-power-supply",
550 		.data = (void *)&axp221_data,
551 	}, {
552 		.compatible = "x-powers,axp813-battery-power-supply",
553 		.data = (void *)&axp813_data,
554 	}, { /* sentinel */ },
555 };
556 MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
557 
558 static int axp20x_power_probe(struct platform_device *pdev)
559 {
560 	struct axp20x_batt_ps *axp20x_batt;
561 	struct power_supply_config psy_cfg = {};
562 	struct power_supply_battery_info *info;
563 	struct device *dev = &pdev->dev;
564 
565 	if (!of_device_is_available(pdev->dev.of_node))
566 		return -ENODEV;
567 
568 	axp20x_batt = devm_kzalloc(&pdev->dev, sizeof(*axp20x_batt),
569 				   GFP_KERNEL);
570 	if (!axp20x_batt)
571 		return -ENOMEM;
572 
573 	axp20x_batt->dev = &pdev->dev;
574 
575 	axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v");
576 	if (IS_ERR(axp20x_batt->batt_v)) {
577 		if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV)
578 			return -EPROBE_DEFER;
579 		return PTR_ERR(axp20x_batt->batt_v);
580 	}
581 
582 	axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev,
583 							"batt_chrg_i");
584 	if (IS_ERR(axp20x_batt->batt_chrg_i)) {
585 		if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV)
586 			return -EPROBE_DEFER;
587 		return PTR_ERR(axp20x_batt->batt_chrg_i);
588 	}
589 
590 	axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev,
591 							   "batt_dischrg_i");
592 	if (IS_ERR(axp20x_batt->batt_dischrg_i)) {
593 		if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV)
594 			return -EPROBE_DEFER;
595 		return PTR_ERR(axp20x_batt->batt_dischrg_i);
596 	}
597 
598 	axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
599 	platform_set_drvdata(pdev, axp20x_batt);
600 
601 	psy_cfg.drv_data = axp20x_batt;
602 	psy_cfg.of_node = pdev->dev.of_node;
603 
604 	axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev);
605 
606 	axp20x_batt->batt = devm_power_supply_register(&pdev->dev,
607 						       &axp20x_batt_ps_desc,
608 						       &psy_cfg);
609 	if (IS_ERR(axp20x_batt->batt)) {
610 		dev_err(&pdev->dev, "failed to register power supply: %ld\n",
611 			PTR_ERR(axp20x_batt->batt));
612 		return PTR_ERR(axp20x_batt->batt);
613 	}
614 
615 	if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) {
616 		int vmin = info->voltage_min_design_uv;
617 		int ccc = info->constant_charge_current_max_ua;
618 
619 		if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt,
620 							      vmin))
621 			dev_err(&pdev->dev,
622 				"couldn't set voltage_min_design\n");
623 
624 		/* Set max to unverified value to be able to set CCC */
625 		axp20x_batt->max_ccc = ccc;
626 
627 		if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt,
628 								   ccc)) {
629 			dev_err(&pdev->dev,
630 				"couldn't set constant charge current from DT: fallback to minimum value\n");
631 			ccc = 300000;
632 			axp20x_batt->max_ccc = ccc;
633 			axp20x_set_constant_charge_current(axp20x_batt, ccc);
634 		}
635 	}
636 
637 	/*
638 	 * Update max CCC to a valid value if battery info is present or set it
639 	 * to current register value by default.
640 	 */
641 	axp20x_get_constant_charge_current(axp20x_batt,
642 					   &axp20x_batt->max_ccc);
643 
644 	return 0;
645 }
646 
647 static struct platform_driver axp20x_batt_driver = {
648 	.probe    = axp20x_power_probe,
649 	.driver   = {
650 		.name  = "axp20x-battery-power-supply",
651 		.of_match_table = axp20x_battery_ps_id,
652 	},
653 };
654 
655 module_platform_driver(axp20x_batt_driver);
656 
657 MODULE_DESCRIPTION("Battery power supply driver for AXP20X and AXP22X PMICs");
658 MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
659 MODULE_LICENSE("GPL");
660