1 /*
2  * Battery power supply driver for X-Powers AXP20X and AXP22X PMICs
3  *
4  * Copyright 2016 Free Electrons NextThing Co.
5  *	Quentin Schulz <quentin.schulz@free-electrons.com>
6  *
7  * This driver is based on a previous upstreaming attempt by:
8  *	Bruno Prémont <bonbons@linux-vserver.org>
9  *
10  * This file is subject to the terms and conditions of the GNU General
11  * Public License. See the file "COPYING" in the main directory of this
12  * archive for more details.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17  * GNU General Public License for more details.
18  */
19 
20 #include <linux/err.h>
21 #include <linux/interrupt.h>
22 #include <linux/irq.h>
23 #include <linux/module.h>
24 #include <linux/of.h>
25 #include <linux/of_device.h>
26 #include <linux/platform_device.h>
27 #include <linux/power_supply.h>
28 #include <linux/regmap.h>
29 #include <linux/slab.h>
30 #include <linux/time.h>
31 #include <linux/iio/iio.h>
32 #include <linux/iio/consumer.h>
33 #include <linux/mfd/axp20x.h>
34 
35 #define AXP20X_PWR_STATUS_BAT_CHARGING	BIT(2)
36 
37 #define AXP20X_PWR_OP_BATT_PRESENT	BIT(5)
38 #define AXP20X_PWR_OP_BATT_ACTIVATED	BIT(3)
39 
40 #define AXP209_FG_PERCENT		GENMASK(6, 0)
41 #define AXP22X_FG_VALID			BIT(7)
42 
43 #define AXP20X_CHRG_CTRL1_TGT_VOLT	GENMASK(6, 5)
44 #define AXP20X_CHRG_CTRL1_TGT_4_1V	(0 << 5)
45 #define AXP20X_CHRG_CTRL1_TGT_4_15V	(1 << 5)
46 #define AXP20X_CHRG_CTRL1_TGT_4_2V	(2 << 5)
47 #define AXP20X_CHRG_CTRL1_TGT_4_36V	(3 << 5)
48 
49 #define AXP22X_CHRG_CTRL1_TGT_4_22V	(1 << 5)
50 #define AXP22X_CHRG_CTRL1_TGT_4_24V	(3 << 5)
51 
52 #define AXP813_CHRG_CTRL1_TGT_4_35V	(3 << 5)
53 
54 #define AXP20X_CHRG_CTRL1_TGT_CURR	GENMASK(3, 0)
55 
56 #define AXP20X_V_OFF_MASK		GENMASK(2, 0)
57 
58 struct axp20x_batt_ps;
59 
60 struct axp_data {
61 	int	ccc_scale;
62 	int	ccc_offset;
63 	bool	has_fg_valid;
64 	int	(*get_max_voltage)(struct axp20x_batt_ps *batt, int *val);
65 	int	(*set_max_voltage)(struct axp20x_batt_ps *batt, int val);
66 };
67 
68 struct axp20x_batt_ps {
69 	struct regmap *regmap;
70 	struct power_supply *batt;
71 	struct device *dev;
72 	struct iio_channel *batt_chrg_i;
73 	struct iio_channel *batt_dischrg_i;
74 	struct iio_channel *batt_v;
75 	/* Maximum constant charge current */
76 	unsigned int max_ccc;
77 	const struct axp_data	*data;
78 };
79 
80 static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
81 					  int *val)
82 {
83 	int ret, reg;
84 
85 	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
86 	if (ret)
87 		return ret;
88 
89 	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
90 	case AXP20X_CHRG_CTRL1_TGT_4_1V:
91 		*val = 4100000;
92 		break;
93 	case AXP20X_CHRG_CTRL1_TGT_4_15V:
94 		*val = 4150000;
95 		break;
96 	case AXP20X_CHRG_CTRL1_TGT_4_2V:
97 		*val = 4200000;
98 		break;
99 	case AXP20X_CHRG_CTRL1_TGT_4_36V:
100 		*val = 4360000;
101 		break;
102 	default:
103 		return -EINVAL;
104 	}
105 
106 	return 0;
107 }
108 
109 static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
110 					  int *val)
111 {
112 	int ret, reg;
113 
114 	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
115 	if (ret)
116 		return ret;
117 
118 	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
119 	case AXP20X_CHRG_CTRL1_TGT_4_1V:
120 		*val = 4100000;
121 		break;
122 	case AXP20X_CHRG_CTRL1_TGT_4_2V:
123 		*val = 4200000;
124 		break;
125 	case AXP22X_CHRG_CTRL1_TGT_4_22V:
126 		*val = 4220000;
127 		break;
128 	case AXP22X_CHRG_CTRL1_TGT_4_24V:
129 		*val = 4240000;
130 		break;
131 	default:
132 		return -EINVAL;
133 	}
134 
135 	return 0;
136 }
137 
138 static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
139 					  int *val)
140 {
141 	int ret, reg;
142 
143 	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
144 	if (ret)
145 		return ret;
146 
147 	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
148 	case AXP20X_CHRG_CTRL1_TGT_4_1V:
149 		*val = 4100000;
150 		break;
151 	case AXP20X_CHRG_CTRL1_TGT_4_15V:
152 		*val = 4150000;
153 		break;
154 	case AXP20X_CHRG_CTRL1_TGT_4_2V:
155 		*val = 4200000;
156 		break;
157 	case AXP813_CHRG_CTRL1_TGT_4_35V:
158 		*val = 4350000;
159 		break;
160 	default:
161 		return -EINVAL;
162 	}
163 
164 	return 0;
165 }
166 
167 static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
168 					      int *val)
169 {
170 	int ret;
171 
172 	ret = regmap_read(axp->regmap, AXP20X_CHRG_CTRL1, val);
173 	if (ret)
174 		return ret;
175 
176 	*val &= AXP20X_CHRG_CTRL1_TGT_CURR;
177 
178 	*val = *val * axp->data->ccc_scale + axp->data->ccc_offset;
179 
180 	return 0;
181 }
182 
183 static int axp20x_battery_get_prop(struct power_supply *psy,
184 				   enum power_supply_property psp,
185 				   union power_supply_propval *val)
186 {
187 	struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
188 	struct iio_channel *chan;
189 	int ret = 0, reg, val1;
190 
191 	switch (psp) {
192 	case POWER_SUPPLY_PROP_PRESENT:
193 	case POWER_SUPPLY_PROP_ONLINE:
194 		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
195 				  &reg);
196 		if (ret)
197 			return ret;
198 
199 		val->intval = !!(reg & AXP20X_PWR_OP_BATT_PRESENT);
200 		break;
201 
202 	case POWER_SUPPLY_PROP_STATUS:
203 		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
204 				  &reg);
205 		if (ret)
206 			return ret;
207 
208 		if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) {
209 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
210 			return 0;
211 		}
212 
213 		ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i,
214 						 &val1);
215 		if (ret)
216 			return ret;
217 
218 		if (val1) {
219 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
220 			return 0;
221 		}
222 
223 		ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &val1);
224 		if (ret)
225 			return ret;
226 
227 		/*
228 		 * Fuel Gauge data takes 7 bits but the stored value seems to be
229 		 * directly the raw percentage without any scaling to 7 bits.
230 		 */
231 		if ((val1 & AXP209_FG_PERCENT) == 100)
232 			val->intval = POWER_SUPPLY_STATUS_FULL;
233 		else
234 			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
235 		break;
236 
237 	case POWER_SUPPLY_PROP_HEALTH:
238 		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
239 				  &val1);
240 		if (ret)
241 			return ret;
242 
243 		if (val1 & AXP20X_PWR_OP_BATT_ACTIVATED) {
244 			val->intval = POWER_SUPPLY_HEALTH_DEAD;
245 			return 0;
246 		}
247 
248 		val->intval = POWER_SUPPLY_HEALTH_GOOD;
249 		break;
250 
251 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
252 		ret = axp20x_get_constant_charge_current(axp20x_batt,
253 							 &val->intval);
254 		if (ret)
255 			return ret;
256 		break;
257 
258 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
259 		val->intval = axp20x_batt->max_ccc;
260 		break;
261 
262 	case POWER_SUPPLY_PROP_CURRENT_NOW:
263 		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
264 				  &reg);
265 		if (ret)
266 			return ret;
267 
268 		if (reg & AXP20X_PWR_STATUS_BAT_CHARGING)
269 			chan = axp20x_batt->batt_chrg_i;
270 		else
271 			chan = axp20x_batt->batt_dischrg_i;
272 
273 		ret = iio_read_channel_processed(chan, &val->intval);
274 		if (ret)
275 			return ret;
276 
277 		/* IIO framework gives mA but Power Supply framework gives uA */
278 		val->intval *= 1000;
279 		break;
280 
281 	case POWER_SUPPLY_PROP_CAPACITY:
282 		/* When no battery is present, return capacity is 100% */
283 		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
284 				  &reg);
285 		if (ret)
286 			return ret;
287 
288 		if (!(reg & AXP20X_PWR_OP_BATT_PRESENT)) {
289 			val->intval = 100;
290 			return 0;
291 		}
292 
293 		ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &reg);
294 		if (ret)
295 			return ret;
296 
297 		if (axp20x_batt->data->has_fg_valid && !(reg & AXP22X_FG_VALID))
298 			return -EINVAL;
299 
300 		/*
301 		 * Fuel Gauge data takes 7 bits but the stored value seems to be
302 		 * directly the raw percentage without any scaling to 7 bits.
303 		 */
304 		val->intval = reg & AXP209_FG_PERCENT;
305 		break;
306 
307 	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
308 		return axp20x_batt->data->get_max_voltage(axp20x_batt,
309 							  &val->intval);
310 
311 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
312 		ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, &reg);
313 		if (ret)
314 			return ret;
315 
316 		val->intval = 2600000 + 100000 * (reg & AXP20X_V_OFF_MASK);
317 		break;
318 
319 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
320 		ret = iio_read_channel_processed(axp20x_batt->batt_v,
321 						 &val->intval);
322 		if (ret)
323 			return ret;
324 
325 		/* IIO framework gives mV but Power Supply framework gives uV */
326 		val->intval *= 1000;
327 		break;
328 
329 	default:
330 		return -EINVAL;
331 	}
332 
333 	return 0;
334 }
335 
336 static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
337 					  int val)
338 {
339 	switch (val) {
340 	case 4100000:
341 		val = AXP20X_CHRG_CTRL1_TGT_4_1V;
342 		break;
343 
344 	case 4200000:
345 		val = AXP20X_CHRG_CTRL1_TGT_4_2V;
346 		break;
347 
348 	default:
349 		/*
350 		 * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
351 		 * can be set to 4.22V and 4.24V, but these voltages are too
352 		 * high for Lithium based batteries (AXP PMICs are supposed to
353 		 * be used with these kinds of battery).
354 		 */
355 		return -EINVAL;
356 	}
357 
358 	return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
359 				  AXP20X_CHRG_CTRL1_TGT_VOLT, val);
360 }
361 
362 static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
363 					  int val)
364 {
365 	switch (val) {
366 	case 4100000:
367 		val = AXP20X_CHRG_CTRL1_TGT_4_1V;
368 		break;
369 
370 	case 4150000:
371 		val = AXP20X_CHRG_CTRL1_TGT_4_15V;
372 		break;
373 
374 	case 4200000:
375 		val = AXP20X_CHRG_CTRL1_TGT_4_2V;
376 		break;
377 
378 	default:
379 		/*
380 		 * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
381 		 * can be set to 4.22V and 4.24V, but these voltages are too
382 		 * high for Lithium based batteries (AXP PMICs are supposed to
383 		 * be used with these kinds of battery).
384 		 */
385 		return -EINVAL;
386 	}
387 
388 	return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
389 				  AXP20X_CHRG_CTRL1_TGT_VOLT, val);
390 }
391 
392 static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt,
393 					      int charge_current)
394 {
395 	if (charge_current > axp_batt->max_ccc)
396 		return -EINVAL;
397 
398 	charge_current = (charge_current - axp_batt->data->ccc_offset) /
399 		axp_batt->data->ccc_scale;
400 
401 	if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
402 		return -EINVAL;
403 
404 	return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1,
405 				  AXP20X_CHRG_CTRL1_TGT_CURR, charge_current);
406 }
407 
408 static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp,
409 						  int charge_current)
410 {
411 	bool lower_max = false;
412 
413 	charge_current = (charge_current - axp->data->ccc_offset) /
414 		axp->data->ccc_scale;
415 
416 	if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
417 		return -EINVAL;
418 
419 	charge_current = charge_current * axp->data->ccc_scale +
420 		axp->data->ccc_offset;
421 
422 	if (charge_current > axp->max_ccc)
423 		dev_warn(axp->dev,
424 			 "Setting max constant charge current higher than previously defined. Note that increasing the constant charge current may damage your battery.\n");
425 	else
426 		lower_max = true;
427 
428 	axp->max_ccc = charge_current;
429 
430 	if (lower_max) {
431 		int current_cc;
432 
433 		axp20x_get_constant_charge_current(axp, &current_cc);
434 		if (current_cc > charge_current)
435 			axp20x_set_constant_charge_current(axp, charge_current);
436 	}
437 
438 	return 0;
439 }
440 static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt,
441 					 int min_voltage)
442 {
443 	int val1 = (min_voltage - 2600000) / 100000;
444 
445 	if (val1 < 0 || val1 > AXP20X_V_OFF_MASK)
446 		return -EINVAL;
447 
448 	return regmap_update_bits(axp_batt->regmap, AXP20X_V_OFF,
449 				  AXP20X_V_OFF_MASK, val1);
450 }
451 
452 static int axp20x_battery_set_prop(struct power_supply *psy,
453 				   enum power_supply_property psp,
454 				   const union power_supply_propval *val)
455 {
456 	struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
457 
458 	switch (psp) {
459 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
460 		return axp20x_set_voltage_min_design(axp20x_batt, val->intval);
461 
462 	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
463 		return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval);
464 
465 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
466 		return axp20x_set_constant_charge_current(axp20x_batt,
467 							  val->intval);
468 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
469 		return axp20x_set_max_constant_charge_current(axp20x_batt,
470 							      val->intval);
471 
472 	default:
473 		return -EINVAL;
474 	}
475 }
476 
477 static enum power_supply_property axp20x_battery_props[] = {
478 	POWER_SUPPLY_PROP_PRESENT,
479 	POWER_SUPPLY_PROP_ONLINE,
480 	POWER_SUPPLY_PROP_STATUS,
481 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
482 	POWER_SUPPLY_PROP_CURRENT_NOW,
483 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
484 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
485 	POWER_SUPPLY_PROP_HEALTH,
486 	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
487 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
488 	POWER_SUPPLY_PROP_CAPACITY,
489 };
490 
491 static int axp20x_battery_prop_writeable(struct power_supply *psy,
492 					 enum power_supply_property psp)
493 {
494 	return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN ||
495 	       psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN ||
496 	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT ||
497 	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
498 }
499 
500 static const struct power_supply_desc axp20x_batt_ps_desc = {
501 	.name = "axp20x-battery",
502 	.type = POWER_SUPPLY_TYPE_BATTERY,
503 	.properties = axp20x_battery_props,
504 	.num_properties = ARRAY_SIZE(axp20x_battery_props),
505 	.property_is_writeable = axp20x_battery_prop_writeable,
506 	.get_property = axp20x_battery_get_prop,
507 	.set_property = axp20x_battery_set_prop,
508 };
509 
510 static const struct axp_data axp209_data = {
511 	.ccc_scale = 100000,
512 	.ccc_offset = 300000,
513 	.get_max_voltage = axp20x_battery_get_max_voltage,
514 	.set_max_voltage = axp20x_battery_set_max_voltage,
515 };
516 
517 static const struct axp_data axp221_data = {
518 	.ccc_scale = 150000,
519 	.ccc_offset = 300000,
520 	.has_fg_valid = true,
521 	.get_max_voltage = axp22x_battery_get_max_voltage,
522 	.set_max_voltage = axp22x_battery_set_max_voltage,
523 };
524 
525 static const struct axp_data axp813_data = {
526 	.ccc_scale = 200000,
527 	.ccc_offset = 200000,
528 	.has_fg_valid = true,
529 	.get_max_voltage = axp813_battery_get_max_voltage,
530 	.set_max_voltage = axp20x_battery_set_max_voltage,
531 };
532 
533 static const struct of_device_id axp20x_battery_ps_id[] = {
534 	{
535 		.compatible = "x-powers,axp209-battery-power-supply",
536 		.data = (void *)&axp209_data,
537 	}, {
538 		.compatible = "x-powers,axp221-battery-power-supply",
539 		.data = (void *)&axp221_data,
540 	}, {
541 		.compatible = "x-powers,axp813-battery-power-supply",
542 		.data = (void *)&axp813_data,
543 	}, { /* sentinel */ },
544 };
545 MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
546 
547 static int axp20x_power_probe(struct platform_device *pdev)
548 {
549 	struct axp20x_batt_ps *axp20x_batt;
550 	struct power_supply_config psy_cfg = {};
551 	struct power_supply_battery_info info;
552 	struct device *dev = &pdev->dev;
553 
554 	if (!of_device_is_available(pdev->dev.of_node))
555 		return -ENODEV;
556 
557 	axp20x_batt = devm_kzalloc(&pdev->dev, sizeof(*axp20x_batt),
558 				   GFP_KERNEL);
559 	if (!axp20x_batt)
560 		return -ENOMEM;
561 
562 	axp20x_batt->dev = &pdev->dev;
563 
564 	axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v");
565 	if (IS_ERR(axp20x_batt->batt_v)) {
566 		if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV)
567 			return -EPROBE_DEFER;
568 		return PTR_ERR(axp20x_batt->batt_v);
569 	}
570 
571 	axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev,
572 							"batt_chrg_i");
573 	if (IS_ERR(axp20x_batt->batt_chrg_i)) {
574 		if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV)
575 			return -EPROBE_DEFER;
576 		return PTR_ERR(axp20x_batt->batt_chrg_i);
577 	}
578 
579 	axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev,
580 							   "batt_dischrg_i");
581 	if (IS_ERR(axp20x_batt->batt_dischrg_i)) {
582 		if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV)
583 			return -EPROBE_DEFER;
584 		return PTR_ERR(axp20x_batt->batt_dischrg_i);
585 	}
586 
587 	axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
588 	platform_set_drvdata(pdev, axp20x_batt);
589 
590 	psy_cfg.drv_data = axp20x_batt;
591 	psy_cfg.of_node = pdev->dev.of_node;
592 
593 	axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev);
594 
595 	axp20x_batt->batt = devm_power_supply_register(&pdev->dev,
596 						       &axp20x_batt_ps_desc,
597 						       &psy_cfg);
598 	if (IS_ERR(axp20x_batt->batt)) {
599 		dev_err(&pdev->dev, "failed to register power supply: %ld\n",
600 			PTR_ERR(axp20x_batt->batt));
601 		return PTR_ERR(axp20x_batt->batt);
602 	}
603 
604 	if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) {
605 		int vmin = info.voltage_min_design_uv;
606 		int ccc = info.constant_charge_current_max_ua;
607 
608 		if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt,
609 							      vmin))
610 			dev_err(&pdev->dev,
611 				"couldn't set voltage_min_design\n");
612 
613 		/* Set max to unverified value to be able to set CCC */
614 		axp20x_batt->max_ccc = ccc;
615 
616 		if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt,
617 								   ccc)) {
618 			dev_err(&pdev->dev,
619 				"couldn't set constant charge current from DT: fallback to minimum value\n");
620 			ccc = 300000;
621 			axp20x_batt->max_ccc = ccc;
622 			axp20x_set_constant_charge_current(axp20x_batt, ccc);
623 		}
624 	}
625 
626 	/*
627 	 * Update max CCC to a valid value if battery info is present or set it
628 	 * to current register value by default.
629 	 */
630 	axp20x_get_constant_charge_current(axp20x_batt,
631 					   &axp20x_batt->max_ccc);
632 
633 	return 0;
634 }
635 
636 static struct platform_driver axp20x_batt_driver = {
637 	.probe    = axp20x_power_probe,
638 	.driver   = {
639 		.name  = "axp20x-battery-power-supply",
640 		.of_match_table = axp20x_battery_ps_id,
641 	},
642 };
643 
644 module_platform_driver(axp20x_batt_driver);
645 
646 MODULE_DESCRIPTION("Battery power supply driver for AXP20X and AXP22X PMICs");
647 MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
648 MODULE_LICENSE("GPL");
649