1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) ST-Ericsson SA 2012 4 * 5 * Charger driver for AB8500 6 * 7 * Author: 8 * Johan Palsson <johan.palsson@stericsson.com> 9 * Karl Komierowski <karl.komierowski@stericsson.com> 10 * Arun R Murthy <arun.murthy@stericsson.com> 11 */ 12 13 #include <linux/init.h> 14 #include <linux/module.h> 15 #include <linux/device.h> 16 #include <linux/interrupt.h> 17 #include <linux/delay.h> 18 #include <linux/notifier.h> 19 #include <linux/slab.h> 20 #include <linux/platform_device.h> 21 #include <linux/power_supply.h> 22 #include <linux/completion.h> 23 #include <linux/regulator/consumer.h> 24 #include <linux/err.h> 25 #include <linux/workqueue.h> 26 #include <linux/kobject.h> 27 #include <linux/of.h> 28 #include <linux/mfd/core.h> 29 #include <linux/mfd/abx500/ab8500.h> 30 #include <linux/mfd/abx500.h> 31 #include <linux/mfd/abx500/ab8500-bm.h> 32 #include <linux/mfd/abx500/ux500_chargalg.h> 33 #include <linux/usb/otg.h> 34 #include <linux/mutex.h> 35 #include <linux/iio/consumer.h> 36 37 /* Charger constants */ 38 #define NO_PW_CONN 0 39 #define AC_PW_CONN 1 40 #define USB_PW_CONN 2 41 42 #define MAIN_WDOG_ENA 0x01 43 #define MAIN_WDOG_KICK 0x02 44 #define MAIN_WDOG_DIS 0x00 45 #define CHARG_WD_KICK 0x01 46 #define MAIN_CH_ENA 0x01 47 #define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02 48 #define USB_CH_ENA 0x01 49 #define USB_CHG_NO_OVERSHOOT_ENA_N 0x02 50 #define MAIN_CH_DET 0x01 51 #define MAIN_CH_CV_ON 0x04 52 #define USB_CH_CV_ON 0x08 53 #define VBUS_DET_DBNC100 0x02 54 #define VBUS_DET_DBNC1 0x01 55 #define OTP_ENABLE_WD 0x01 56 #define DROP_COUNT_RESET 0x01 57 #define USB_CH_DET 0x01 58 59 #define MAIN_CH_INPUT_CURR_SHIFT 4 60 #define VBUS_IN_CURR_LIM_SHIFT 4 61 #define AUTO_VBUS_IN_CURR_LIM_SHIFT 4 62 #define VBUS_IN_CURR_LIM_RETRY_SET_TIME 30 /* seconds */ 63 64 #define LED_INDICATOR_PWM_ENA 0x01 65 #define LED_INDICATOR_PWM_DIS 0x00 66 #define LED_IND_CUR_5MA 0x04 67 #define LED_INDICATOR_PWM_DUTY_252_256 0xBF 68 69 /* HW failure constants */ 70 #define MAIN_CH_TH_PROT 0x02 71 #define VBUS_CH_NOK 0x08 72 #define USB_CH_TH_PROT 0x02 73 #define VBUS_OVV_TH 0x01 74 #define MAIN_CH_NOK 0x01 75 #define VBUS_DET 0x80 76 77 #define MAIN_CH_STATUS2_MAINCHGDROP 0x80 78 #define MAIN_CH_STATUS2_MAINCHARGERDETDBNC 0x40 79 #define USB_CH_VBUSDROP 0x40 80 #define USB_CH_VBUSDETDBNC 0x01 81 82 /* UsbLineStatus register bit masks */ 83 #define AB8500_USB_LINK_STATUS 0x78 84 #define AB8505_USB_LINK_STATUS 0xF8 85 #define AB8500_STD_HOST_SUSP 0x18 86 #define USB_LINK_STATUS_SHIFT 3 87 88 /* Watchdog timeout constant */ 89 #define WD_TIMER 0x30 /* 4min */ 90 #define WD_KICK_INTERVAL (60 * HZ) 91 92 /* Lowest charger voltage is 3.39V -> 0x4E */ 93 #define LOW_VOLT_REG 0x4E 94 95 /* Step up/down delay in us */ 96 #define STEP_UDELAY 1000 97 98 #define CHARGER_STATUS_POLL 10 /* in ms */ 99 100 #define CHG_WD_INTERVAL (60 * HZ) 101 102 #define AB8500_SW_CONTROL_FALLBACK 0x03 103 /* Wait for enumeration before charing in us */ 104 #define WAIT_ACA_RID_ENUMERATION (5 * 1000) 105 /*External charger control*/ 106 #define AB8500_SYS_CHARGER_CONTROL_REG 0x52 107 #define EXTERNAL_CHARGER_DISABLE_REG_VAL 0x03 108 #define EXTERNAL_CHARGER_ENABLE_REG_VAL 0x07 109 110 /* UsbLineStatus register - usb types */ 111 enum ab8500_charger_link_status { 112 USB_STAT_NOT_CONFIGURED, 113 USB_STAT_STD_HOST_NC, 114 USB_STAT_STD_HOST_C_NS, 115 USB_STAT_STD_HOST_C_S, 116 USB_STAT_HOST_CHG_NM, 117 USB_STAT_HOST_CHG_HS, 118 USB_STAT_HOST_CHG_HS_CHIRP, 119 USB_STAT_DEDICATED_CHG, 120 USB_STAT_ACA_RID_A, 121 USB_STAT_ACA_RID_B, 122 USB_STAT_ACA_RID_C_NM, 123 USB_STAT_ACA_RID_C_HS, 124 USB_STAT_ACA_RID_C_HS_CHIRP, 125 USB_STAT_HM_IDGND, 126 USB_STAT_RESERVED, 127 USB_STAT_NOT_VALID_LINK, 128 USB_STAT_PHY_EN, 129 USB_STAT_SUP_NO_IDGND_VBUS, 130 USB_STAT_SUP_IDGND_VBUS, 131 USB_STAT_CHARGER_LINE_1, 132 USB_STAT_CARKIT_1, 133 USB_STAT_CARKIT_2, 134 USB_STAT_ACA_DOCK_CHARGER, 135 }; 136 137 enum ab8500_usb_state { 138 AB8500_BM_USB_STATE_RESET_HS, /* HighSpeed Reset */ 139 AB8500_BM_USB_STATE_RESET_FS, /* FullSpeed/LowSpeed Reset */ 140 AB8500_BM_USB_STATE_CONFIGURED, 141 AB8500_BM_USB_STATE_SUSPEND, 142 AB8500_BM_USB_STATE_RESUME, 143 AB8500_BM_USB_STATE_MAX, 144 }; 145 146 /* VBUS input current limits supported in AB8500 in mA */ 147 #define USB_CH_IP_CUR_LVL_0P05 50 148 #define USB_CH_IP_CUR_LVL_0P09 98 149 #define USB_CH_IP_CUR_LVL_0P19 193 150 #define USB_CH_IP_CUR_LVL_0P29 290 151 #define USB_CH_IP_CUR_LVL_0P38 380 152 #define USB_CH_IP_CUR_LVL_0P45 450 153 #define USB_CH_IP_CUR_LVL_0P5 500 154 #define USB_CH_IP_CUR_LVL_0P6 600 155 #define USB_CH_IP_CUR_LVL_0P7 700 156 #define USB_CH_IP_CUR_LVL_0P8 800 157 #define USB_CH_IP_CUR_LVL_0P9 900 158 #define USB_CH_IP_CUR_LVL_1P0 1000 159 #define USB_CH_IP_CUR_LVL_1P1 1100 160 #define USB_CH_IP_CUR_LVL_1P3 1300 161 #define USB_CH_IP_CUR_LVL_1P4 1400 162 #define USB_CH_IP_CUR_LVL_1P5 1500 163 164 #define VBAT_TRESH_IP_CUR_RED 3800 165 166 #define to_ab8500_charger_usb_device_info(x) container_of((x), \ 167 struct ab8500_charger, usb_chg) 168 #define to_ab8500_charger_ac_device_info(x) container_of((x), \ 169 struct ab8500_charger, ac_chg) 170 171 /** 172 * struct ab8500_charger_interrupts - ab8500 interupts 173 * @name: name of the interrupt 174 * @isr function pointer to the isr 175 */ 176 struct ab8500_charger_interrupts { 177 char *name; 178 irqreturn_t (*isr)(int irq, void *data); 179 }; 180 181 struct ab8500_charger_info { 182 int charger_connected; 183 int charger_online; 184 int charger_voltage; 185 int cv_active; 186 bool wd_expired; 187 int charger_current; 188 }; 189 190 struct ab8500_charger_event_flags { 191 bool mainextchnotok; 192 bool main_thermal_prot; 193 bool usb_thermal_prot; 194 bool vbus_ovv; 195 bool usbchargernotok; 196 bool chgwdexp; 197 bool vbus_collapse; 198 bool vbus_drop_end; 199 }; 200 201 struct ab8500_charger_usb_state { 202 int usb_current; 203 int usb_current_tmp; 204 enum ab8500_usb_state state; 205 enum ab8500_usb_state state_tmp; 206 spinlock_t usb_lock; 207 }; 208 209 struct ab8500_charger_max_usb_in_curr { 210 int usb_type_max; 211 int set_max; 212 int calculated_max; 213 }; 214 215 /** 216 * struct ab8500_charger - ab8500 Charger device information 217 * @dev: Pointer to the structure device 218 * @vbus_detected: VBUS detected 219 * @vbus_detected_start: 220 * VBUS detected during startup 221 * @ac_conn: This will be true when the AC charger has been plugged 222 * @vddadc_en_ac: Indicate if VDD ADC supply is enabled because AC 223 * charger is enabled 224 * @vddadc_en_usb: Indicate if VDD ADC supply is enabled because USB 225 * charger is enabled 226 * @vbat Battery voltage 227 * @old_vbat Previously measured battery voltage 228 * @usb_device_is_unrecognised USB device is unrecognised by the hardware 229 * @autopower Indicate if we should have automatic pwron after pwrloss 230 * @autopower_cfg platform specific power config support for "pwron after pwrloss" 231 * @invalid_charger_detect_state State when forcing AB to use invalid charger 232 * @is_aca_rid: Incicate if accessory is ACA type 233 * @current_stepping_sessions: 234 * Counter for current stepping sessions 235 * @parent: Pointer to the struct ab8500 236 * @adc_main_charger_v ADC channel for main charger voltage 237 * @adc_main_charger_c ADC channel for main charger current 238 * @adc_vbus_v ADC channel for USB charger voltage 239 * @adc_usb_charger_c ADC channel for USB charger current 240 * @bm: Platform specific battery management information 241 * @flags: Structure for information about events triggered 242 * @usb_state: Structure for usb stack information 243 * @max_usb_in_curr: Max USB charger input current 244 * @ac_chg: AC charger power supply 245 * @usb_chg: USB charger power supply 246 * @ac: Structure that holds the AC charger properties 247 * @usb: Structure that holds the USB charger properties 248 * @regu: Pointer to the struct regulator 249 * @charger_wq: Work queue for the IRQs and checking HW state 250 * @usb_ipt_crnt_lock: Lock to protect VBUS input current setting from mutuals 251 * @pm_lock: Lock to prevent system to suspend 252 * @check_vbat_work Work for checking vbat threshold to adjust vbus current 253 * @check_hw_failure_work: Work for checking HW state 254 * @check_usbchgnotok_work: Work for checking USB charger not ok status 255 * @kick_wd_work: Work for kicking the charger watchdog in case 256 * of ABB rev 1.* due to the watchog logic bug 257 * @ac_charger_attached_work: Work for checking if AC charger is still 258 * connected 259 * @usb_charger_attached_work: Work for checking if USB charger is still 260 * connected 261 * @ac_work: Work for checking AC charger connection 262 * @detect_usb_type_work: Work for detecting the USB type connected 263 * @usb_link_status_work: Work for checking the new USB link status 264 * @usb_state_changed_work: Work for checking USB state 265 * @attach_work: Work for detecting USB type 266 * @vbus_drop_end_work: Work for detecting VBUS drop end 267 * @check_main_thermal_prot_work: 268 * Work for checking Main thermal status 269 * @check_usb_thermal_prot_work: 270 * Work for checking USB thermal status 271 * @charger_attached_mutex: For controlling the wakelock 272 */ 273 struct ab8500_charger { 274 struct device *dev; 275 bool vbus_detected; 276 bool vbus_detected_start; 277 bool ac_conn; 278 bool vddadc_en_ac; 279 bool vddadc_en_usb; 280 int vbat; 281 int old_vbat; 282 bool usb_device_is_unrecognised; 283 bool autopower; 284 bool autopower_cfg; 285 int invalid_charger_detect_state; 286 int is_aca_rid; 287 atomic_t current_stepping_sessions; 288 struct ab8500 *parent; 289 struct iio_channel *adc_main_charger_v; 290 struct iio_channel *adc_main_charger_c; 291 struct iio_channel *adc_vbus_v; 292 struct iio_channel *adc_usb_charger_c; 293 struct abx500_bm_data *bm; 294 struct ab8500_charger_event_flags flags; 295 struct ab8500_charger_usb_state usb_state; 296 struct ab8500_charger_max_usb_in_curr max_usb_in_curr; 297 struct ux500_charger ac_chg; 298 struct ux500_charger usb_chg; 299 struct ab8500_charger_info ac; 300 struct ab8500_charger_info usb; 301 struct regulator *regu; 302 struct workqueue_struct *charger_wq; 303 struct mutex usb_ipt_crnt_lock; 304 struct delayed_work check_vbat_work; 305 struct delayed_work check_hw_failure_work; 306 struct delayed_work check_usbchgnotok_work; 307 struct delayed_work kick_wd_work; 308 struct delayed_work usb_state_changed_work; 309 struct delayed_work attach_work; 310 struct delayed_work ac_charger_attached_work; 311 struct delayed_work usb_charger_attached_work; 312 struct delayed_work vbus_drop_end_work; 313 struct work_struct ac_work; 314 struct work_struct detect_usb_type_work; 315 struct work_struct usb_link_status_work; 316 struct work_struct check_main_thermal_prot_work; 317 struct work_struct check_usb_thermal_prot_work; 318 struct usb_phy *usb_phy; 319 struct notifier_block nb; 320 struct mutex charger_attached_mutex; 321 }; 322 323 /* AC properties */ 324 static enum power_supply_property ab8500_charger_ac_props[] = { 325 POWER_SUPPLY_PROP_HEALTH, 326 POWER_SUPPLY_PROP_PRESENT, 327 POWER_SUPPLY_PROP_ONLINE, 328 POWER_SUPPLY_PROP_VOLTAGE_NOW, 329 POWER_SUPPLY_PROP_VOLTAGE_AVG, 330 POWER_SUPPLY_PROP_CURRENT_NOW, 331 }; 332 333 /* USB properties */ 334 static enum power_supply_property ab8500_charger_usb_props[] = { 335 POWER_SUPPLY_PROP_HEALTH, 336 POWER_SUPPLY_PROP_CURRENT_AVG, 337 POWER_SUPPLY_PROP_PRESENT, 338 POWER_SUPPLY_PROP_ONLINE, 339 POWER_SUPPLY_PROP_VOLTAGE_NOW, 340 POWER_SUPPLY_PROP_VOLTAGE_AVG, 341 POWER_SUPPLY_PROP_CURRENT_NOW, 342 }; 343 344 /* 345 * Function for enabling and disabling sw fallback mode 346 * should always be disabled when no charger is connected. 347 */ 348 static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di, 349 bool fallback) 350 { 351 u8 val; 352 u8 reg; 353 u8 bank; 354 u8 bit; 355 int ret; 356 357 dev_dbg(di->dev, "SW Fallback: %d\n", fallback); 358 359 if (is_ab8500(di->parent)) { 360 bank = 0x15; 361 reg = 0x0; 362 bit = 3; 363 } else { 364 bank = AB8500_SYS_CTRL1_BLOCK; 365 reg = AB8500_SW_CONTROL_FALLBACK; 366 bit = 0; 367 } 368 369 /* read the register containing fallback bit */ 370 ret = abx500_get_register_interruptible(di->dev, bank, reg, &val); 371 if (ret < 0) { 372 dev_err(di->dev, "%d read failed\n", __LINE__); 373 return; 374 } 375 376 if (is_ab8500(di->parent)) { 377 /* enable the OPT emulation registers */ 378 ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2); 379 if (ret) { 380 dev_err(di->dev, "%d write failed\n", __LINE__); 381 goto disable_otp; 382 } 383 } 384 385 if (fallback) 386 val |= (1 << bit); 387 else 388 val &= ~(1 << bit); 389 390 /* write back the changed fallback bit value to register */ 391 ret = abx500_set_register_interruptible(di->dev, bank, reg, val); 392 if (ret) { 393 dev_err(di->dev, "%d write failed\n", __LINE__); 394 } 395 396 disable_otp: 397 if (is_ab8500(di->parent)) { 398 /* disable the set OTP registers again */ 399 ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0); 400 if (ret) { 401 dev_err(di->dev, "%d write failed\n", __LINE__); 402 } 403 } 404 } 405 406 /** 407 * ab8500_power_supply_changed - a wrapper with local extensions for 408 * power_supply_changed 409 * @di: pointer to the ab8500_charger structure 410 * @psy: pointer to power_supply_that have changed. 411 * 412 */ 413 static void ab8500_power_supply_changed(struct ab8500_charger *di, 414 struct power_supply *psy) 415 { 416 if (di->autopower_cfg) { 417 if (!di->usb.charger_connected && 418 !di->ac.charger_connected && 419 di->autopower) { 420 di->autopower = false; 421 ab8500_enable_disable_sw_fallback(di, false); 422 } else if (!di->autopower && 423 (di->ac.charger_connected || 424 di->usb.charger_connected)) { 425 di->autopower = true; 426 ab8500_enable_disable_sw_fallback(di, true); 427 } 428 } 429 power_supply_changed(psy); 430 } 431 432 static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, 433 bool connected) 434 { 435 if (connected != di->usb.charger_connected) { 436 dev_dbg(di->dev, "USB connected:%i\n", connected); 437 di->usb.charger_connected = connected; 438 439 if (!connected) 440 di->flags.vbus_drop_end = false; 441 442 sysfs_notify(&di->usb_chg.psy->dev.kobj, NULL, "present"); 443 444 if (connected) { 445 mutex_lock(&di->charger_attached_mutex); 446 mutex_unlock(&di->charger_attached_mutex); 447 448 if (is_ab8500(di->parent)) 449 queue_delayed_work(di->charger_wq, 450 &di->usb_charger_attached_work, 451 HZ); 452 } else { 453 cancel_delayed_work_sync(&di->usb_charger_attached_work); 454 mutex_lock(&di->charger_attached_mutex); 455 mutex_unlock(&di->charger_attached_mutex); 456 } 457 } 458 } 459 460 /** 461 * ab8500_charger_get_ac_voltage() - get ac charger voltage 462 * @di: pointer to the ab8500_charger structure 463 * 464 * Returns ac charger voltage (on success) 465 */ 466 static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di) 467 { 468 int vch, ret; 469 470 /* Only measure voltage if the charger is connected */ 471 if (di->ac.charger_connected) { 472 ret = iio_read_channel_processed(di->adc_main_charger_v, &vch); 473 if (ret < 0) 474 dev_err(di->dev, "%s ADC conv failed,\n", __func__); 475 } else { 476 vch = 0; 477 } 478 return vch; 479 } 480 481 /** 482 * ab8500_charger_ac_cv() - check if the main charger is in CV mode 483 * @di: pointer to the ab8500_charger structure 484 * 485 * Returns ac charger CV mode (on success) else error code 486 */ 487 static int ab8500_charger_ac_cv(struct ab8500_charger *di) 488 { 489 u8 val; 490 int ret = 0; 491 492 /* Only check CV mode if the charger is online */ 493 if (di->ac.charger_online) { 494 ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, 495 AB8500_CH_STATUS1_REG, &val); 496 if (ret < 0) { 497 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 498 return 0; 499 } 500 501 if (val & MAIN_CH_CV_ON) 502 ret = 1; 503 else 504 ret = 0; 505 } 506 507 return ret; 508 } 509 510 /** 511 * ab8500_charger_get_vbus_voltage() - get vbus voltage 512 * @di: pointer to the ab8500_charger structure 513 * 514 * This function returns the vbus voltage. 515 * Returns vbus voltage (on success) 516 */ 517 static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) 518 { 519 int vch, ret; 520 521 /* Only measure voltage if the charger is connected */ 522 if (di->usb.charger_connected) { 523 ret = iio_read_channel_processed(di->adc_vbus_v, &vch); 524 if (ret < 0) 525 dev_err(di->dev, "%s ADC conv failed,\n", __func__); 526 } else { 527 vch = 0; 528 } 529 return vch; 530 } 531 532 /** 533 * ab8500_charger_get_usb_current() - get usb charger current 534 * @di: pointer to the ab8500_charger structure 535 * 536 * This function returns the usb charger current. 537 * Returns usb current (on success) and error code on failure 538 */ 539 static int ab8500_charger_get_usb_current(struct ab8500_charger *di) 540 { 541 int ich, ret; 542 543 /* Only measure current if the charger is online */ 544 if (di->usb.charger_online) { 545 ret = iio_read_channel_processed(di->adc_usb_charger_c, &ich); 546 if (ret < 0) 547 dev_err(di->dev, "%s ADC conv failed,\n", __func__); 548 } else { 549 ich = 0; 550 } 551 return ich; 552 } 553 554 /** 555 * ab8500_charger_get_ac_current() - get ac charger current 556 * @di: pointer to the ab8500_charger structure 557 * 558 * This function returns the ac charger current. 559 * Returns ac current (on success) and error code on failure. 560 */ 561 static int ab8500_charger_get_ac_current(struct ab8500_charger *di) 562 { 563 int ich, ret; 564 565 /* Only measure current if the charger is online */ 566 if (di->ac.charger_online) { 567 ret = iio_read_channel_processed(di->adc_main_charger_c, &ich); 568 if (ret < 0) 569 dev_err(di->dev, "%s ADC conv failed,\n", __func__); 570 } else { 571 ich = 0; 572 } 573 return ich; 574 } 575 576 /** 577 * ab8500_charger_usb_cv() - check if the usb charger is in CV mode 578 * @di: pointer to the ab8500_charger structure 579 * 580 * Returns ac charger CV mode (on success) else error code 581 */ 582 static int ab8500_charger_usb_cv(struct ab8500_charger *di) 583 { 584 int ret; 585 u8 val; 586 587 /* Only check CV mode if the charger is online */ 588 if (di->usb.charger_online) { 589 ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, 590 AB8500_CH_USBCH_STAT1_REG, &val); 591 if (ret < 0) { 592 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 593 return 0; 594 } 595 596 if (val & USB_CH_CV_ON) 597 ret = 1; 598 else 599 ret = 0; 600 } else { 601 ret = 0; 602 } 603 604 return ret; 605 } 606 607 /** 608 * ab8500_charger_detect_chargers() - Detect the connected chargers 609 * @di: pointer to the ab8500_charger structure 610 * @probe: if probe, don't delay and wait for HW 611 * 612 * Returns the type of charger connected. 613 * For USB it will not mean we can actually charge from it 614 * but that there is a USB cable connected that we have to 615 * identify. This is used during startup when we don't get 616 * interrupts of the charger detection 617 * 618 * Returns an integer value, that means, 619 * NO_PW_CONN no power supply is connected 620 * AC_PW_CONN if the AC power supply is connected 621 * USB_PW_CONN if the USB power supply is connected 622 * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected 623 */ 624 static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe) 625 { 626 int result = NO_PW_CONN; 627 int ret; 628 u8 val; 629 630 /* Check for AC charger */ 631 ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, 632 AB8500_CH_STATUS1_REG, &val); 633 if (ret < 0) { 634 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 635 return ret; 636 } 637 638 if (val & MAIN_CH_DET) 639 result = AC_PW_CONN; 640 641 /* Check for USB charger */ 642 643 if (!probe) { 644 /* 645 * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100 646 * when disconnecting ACA even though no 647 * charger was connected. Try waiting a little 648 * longer than the 100 ms of VBUS_DET_DBNC100... 649 */ 650 msleep(110); 651 } 652 ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, 653 AB8500_CH_USBCH_STAT1_REG, &val); 654 if (ret < 0) { 655 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 656 return ret; 657 } 658 dev_dbg(di->dev, 659 "%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__, 660 val); 661 if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100)) 662 result |= USB_PW_CONN; 663 664 return result; 665 } 666 667 /** 668 * ab8500_charger_max_usb_curr() - get the max curr for the USB type 669 * @di: pointer to the ab8500_charger structure 670 * @link_status: the identified USB type 671 * 672 * Get the maximum current that is allowed to be drawn from the host 673 * based on the USB type. 674 * Returns error code in case of failure else 0 on success 675 */ 676 static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, 677 enum ab8500_charger_link_status link_status) 678 { 679 int ret = 0; 680 681 di->usb_device_is_unrecognised = false; 682 683 /* 684 * Platform only supports USB 2.0. 685 * This means that charging current from USB source 686 * is maximum 500 mA. Every occurrence of USB_STAT_*_HOST_* 687 * should set USB_CH_IP_CUR_LVL_0P5. 688 */ 689 690 switch (link_status) { 691 case USB_STAT_STD_HOST_NC: 692 case USB_STAT_STD_HOST_C_NS: 693 case USB_STAT_STD_HOST_C_S: 694 dev_dbg(di->dev, "USB Type - Standard host is " 695 "detected through USB driver\n"); 696 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; 697 di->is_aca_rid = 0; 698 break; 699 case USB_STAT_HOST_CHG_HS_CHIRP: 700 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; 701 di->is_aca_rid = 0; 702 break; 703 case USB_STAT_HOST_CHG_HS: 704 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; 705 di->is_aca_rid = 0; 706 break; 707 case USB_STAT_ACA_RID_C_HS: 708 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P9; 709 di->is_aca_rid = 0; 710 break; 711 case USB_STAT_ACA_RID_A: 712 /* 713 * Dedicated charger level minus maximum current accessory 714 * can consume (900mA). Closest level is 500mA 715 */ 716 dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n"); 717 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; 718 di->is_aca_rid = 1; 719 break; 720 case USB_STAT_ACA_RID_B: 721 /* 722 * Dedicated charger level minus 120mA (20mA for ACA and 723 * 100mA for potential accessory). Closest level is 1300mA 724 */ 725 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P3; 726 dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, 727 di->max_usb_in_curr.usb_type_max); 728 di->is_aca_rid = 1; 729 break; 730 case USB_STAT_HOST_CHG_NM: 731 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; 732 di->is_aca_rid = 0; 733 break; 734 case USB_STAT_DEDICATED_CHG: 735 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5; 736 di->is_aca_rid = 0; 737 break; 738 case USB_STAT_ACA_RID_C_HS_CHIRP: 739 case USB_STAT_ACA_RID_C_NM: 740 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5; 741 di->is_aca_rid = 1; 742 break; 743 case USB_STAT_NOT_CONFIGURED: 744 if (di->vbus_detected) { 745 di->usb_device_is_unrecognised = true; 746 dev_dbg(di->dev, "USB Type - Legacy charger.\n"); 747 di->max_usb_in_curr.usb_type_max = 748 USB_CH_IP_CUR_LVL_1P5; 749 break; 750 } 751 fallthrough; 752 case USB_STAT_HM_IDGND: 753 dev_err(di->dev, "USB Type - Charging not allowed\n"); 754 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; 755 ret = -ENXIO; 756 break; 757 case USB_STAT_RESERVED: 758 if (is_ab8500(di->parent)) { 759 di->flags.vbus_collapse = true; 760 dev_err(di->dev, "USB Type - USB_STAT_RESERVED " 761 "VBUS has collapsed\n"); 762 ret = -ENXIO; 763 break; 764 } else { 765 dev_dbg(di->dev, "USB Type - Charging not allowed\n"); 766 di->max_usb_in_curr.usb_type_max = 767 USB_CH_IP_CUR_LVL_0P05; 768 dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", 769 link_status, 770 di->max_usb_in_curr.usb_type_max); 771 ret = -ENXIO; 772 break; 773 } 774 case USB_STAT_CARKIT_1: 775 case USB_STAT_CARKIT_2: 776 case USB_STAT_ACA_DOCK_CHARGER: 777 case USB_STAT_CHARGER_LINE_1: 778 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; 779 dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, 780 di->max_usb_in_curr.usb_type_max); 781 break; 782 case USB_STAT_NOT_VALID_LINK: 783 dev_err(di->dev, "USB Type invalid - try charging anyway\n"); 784 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; 785 break; 786 787 default: 788 dev_err(di->dev, "USB Type - Unknown\n"); 789 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; 790 ret = -ENXIO; 791 break; 792 } 793 794 di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max; 795 dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", 796 link_status, di->max_usb_in_curr.set_max); 797 798 return ret; 799 } 800 801 /** 802 * ab8500_charger_read_usb_type() - read the type of usb connected 803 * @di: pointer to the ab8500_charger structure 804 * 805 * Detect the type of the plugged USB 806 * Returns error code in case of failure else 0 on success 807 */ 808 static int ab8500_charger_read_usb_type(struct ab8500_charger *di) 809 { 810 int ret; 811 u8 val; 812 813 ret = abx500_get_register_interruptible(di->dev, 814 AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val); 815 if (ret < 0) { 816 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 817 return ret; 818 } 819 if (is_ab8500(di->parent)) 820 ret = abx500_get_register_interruptible(di->dev, AB8500_USB, 821 AB8500_USB_LINE_STAT_REG, &val); 822 else 823 ret = abx500_get_register_interruptible(di->dev, 824 AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); 825 if (ret < 0) { 826 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 827 return ret; 828 } 829 830 /* get the USB type */ 831 if (is_ab8500(di->parent)) 832 val = (val & AB8500_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT; 833 else 834 val = (val & AB8505_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT; 835 ret = ab8500_charger_max_usb_curr(di, 836 (enum ab8500_charger_link_status) val); 837 838 return ret; 839 } 840 841 /** 842 * ab8500_charger_detect_usb_type() - get the type of usb connected 843 * @di: pointer to the ab8500_charger structure 844 * 845 * Detect the type of the plugged USB 846 * Returns error code in case of failure else 0 on success 847 */ 848 static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) 849 { 850 int i, ret; 851 u8 val; 852 853 /* 854 * On getting the VBUS rising edge detect interrupt there 855 * is a 250ms delay after which the register UsbLineStatus 856 * is filled with valid data. 857 */ 858 for (i = 0; i < 10; i++) { 859 msleep(250); 860 ret = abx500_get_register_interruptible(di->dev, 861 AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, 862 &val); 863 dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n", 864 __func__, val); 865 if (ret < 0) { 866 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 867 return ret; 868 } 869 870 if (is_ab8500(di->parent)) 871 ret = abx500_get_register_interruptible(di->dev, 872 AB8500_USB, AB8500_USB_LINE_STAT_REG, &val); 873 else 874 ret = abx500_get_register_interruptible(di->dev, 875 AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); 876 if (ret < 0) { 877 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 878 return ret; 879 } 880 dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__, 881 val); 882 /* 883 * Until the IT source register is read the UsbLineStatus 884 * register is not updated, hence doing the same 885 * Revisit this: 886 */ 887 888 /* get the USB type */ 889 if (is_ab8500(di->parent)) 890 val = (val & AB8500_USB_LINK_STATUS) >> 891 USB_LINK_STATUS_SHIFT; 892 else 893 val = (val & AB8505_USB_LINK_STATUS) >> 894 USB_LINK_STATUS_SHIFT; 895 if (val) 896 break; 897 } 898 ret = ab8500_charger_max_usb_curr(di, 899 (enum ab8500_charger_link_status) val); 900 901 return ret; 902 } 903 904 /* 905 * This array maps the raw hex value to charger voltage used by the AB8500 906 * Values taken from the UM0836 907 */ 908 static int ab8500_charger_voltage_map[] = { 909 3500 , 910 3525 , 911 3550 , 912 3575 , 913 3600 , 914 3625 , 915 3650 , 916 3675 , 917 3700 , 918 3725 , 919 3750 , 920 3775 , 921 3800 , 922 3825 , 923 3850 , 924 3875 , 925 3900 , 926 3925 , 927 3950 , 928 3975 , 929 4000 , 930 4025 , 931 4050 , 932 4060 , 933 4070 , 934 4080 , 935 4090 , 936 4100 , 937 4110 , 938 4120 , 939 4130 , 940 4140 , 941 4150 , 942 4160 , 943 4170 , 944 4180 , 945 4190 , 946 4200 , 947 4210 , 948 4220 , 949 4230 , 950 4240 , 951 4250 , 952 4260 , 953 4270 , 954 4280 , 955 4290 , 956 4300 , 957 4310 , 958 4320 , 959 4330 , 960 4340 , 961 4350 , 962 4360 , 963 4370 , 964 4380 , 965 4390 , 966 4400 , 967 4410 , 968 4420 , 969 4430 , 970 4440 , 971 4450 , 972 4460 , 973 4470 , 974 4480 , 975 4490 , 976 4500 , 977 4510 , 978 4520 , 979 4530 , 980 4540 , 981 4550 , 982 4560 , 983 4570 , 984 4580 , 985 4590 , 986 4600 , 987 }; 988 989 static int ab8500_voltage_to_regval(int voltage) 990 { 991 int i; 992 993 /* Special case for voltage below 3.5V */ 994 if (voltage < ab8500_charger_voltage_map[0]) 995 return LOW_VOLT_REG; 996 997 for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) { 998 if (voltage < ab8500_charger_voltage_map[i]) 999 return i - 1; 1000 } 1001 1002 /* If not last element, return error */ 1003 i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1; 1004 if (voltage == ab8500_charger_voltage_map[i]) 1005 return i; 1006 else 1007 return -1; 1008 } 1009 1010 static int ab8500_current_to_regval(struct ab8500_charger *di, int curr) 1011 { 1012 int i; 1013 1014 if (curr < di->bm->chg_output_curr[0]) 1015 return 0; 1016 1017 for (i = 0; i < di->bm->n_chg_out_curr; i++) { 1018 if (curr < di->bm->chg_output_curr[i]) 1019 return i - 1; 1020 } 1021 1022 /* If not last element, return error */ 1023 i = di->bm->n_chg_out_curr - 1; 1024 if (curr == di->bm->chg_output_curr[i]) 1025 return i; 1026 else 1027 return -1; 1028 } 1029 1030 static int ab8500_vbus_in_curr_to_regval(struct ab8500_charger *di, int curr) 1031 { 1032 int i; 1033 1034 if (curr < di->bm->chg_input_curr[0]) 1035 return 0; 1036 1037 for (i = 0; i < di->bm->n_chg_in_curr; i++) { 1038 if (curr < di->bm->chg_input_curr[i]) 1039 return i - 1; 1040 } 1041 1042 /* If not last element, return error */ 1043 i = di->bm->n_chg_in_curr - 1; 1044 if (curr == di->bm->chg_input_curr[i]) 1045 return i; 1046 else 1047 return -1; 1048 } 1049 1050 /** 1051 * ab8500_charger_get_usb_cur() - get usb current 1052 * @di: pointer to the ab8500_charger structre 1053 * 1054 * The usb stack provides the maximum current that can be drawn from 1055 * the standard usb host. This will be in mA. 1056 * This function converts current in mA to a value that can be written 1057 * to the register. Returns -1 if charging is not allowed 1058 */ 1059 static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) 1060 { 1061 int ret = 0; 1062 switch (di->usb_state.usb_current) { 1063 case 100: 1064 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P09; 1065 break; 1066 case 200: 1067 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P19; 1068 break; 1069 case 300: 1070 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P29; 1071 break; 1072 case 400: 1073 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P38; 1074 break; 1075 case 500: 1076 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; 1077 break; 1078 default: 1079 di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; 1080 ret = -EPERM; 1081 break; 1082 } 1083 di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max; 1084 return ret; 1085 } 1086 1087 /** 1088 * ab8500_charger_check_continue_stepping() - Check to allow stepping 1089 * @di: pointer to the ab8500_charger structure 1090 * @reg: select what charger register to check 1091 * 1092 * Check if current stepping should be allowed to continue. 1093 * Checks if charger source has not collapsed. If it has, further stepping 1094 * is not allowed. 1095 */ 1096 static bool ab8500_charger_check_continue_stepping(struct ab8500_charger *di, 1097 int reg) 1098 { 1099 if (reg == AB8500_USBCH_IPT_CRNTLVL_REG) 1100 return !di->flags.vbus_drop_end; 1101 else 1102 return true; 1103 } 1104 1105 /** 1106 * ab8500_charger_set_current() - set charger current 1107 * @di: pointer to the ab8500_charger structure 1108 * @ich: charger current, in mA 1109 * @reg: select what charger register to set 1110 * 1111 * Set charger current. 1112 * There is no state machine in the AB to step up/down the charger 1113 * current to avoid dips and spikes on MAIN, VBUS and VBAT when 1114 * charging is started. Instead we need to implement 1115 * this charger current step-up/down here. 1116 * Returns error code in case of failure else 0(on success) 1117 */ 1118 static int ab8500_charger_set_current(struct ab8500_charger *di, 1119 int ich, int reg) 1120 { 1121 int ret = 0; 1122 int curr_index, prev_curr_index, shift_value, i; 1123 u8 reg_value; 1124 u32 step_udelay; 1125 bool no_stepping = false; 1126 1127 atomic_inc(&di->current_stepping_sessions); 1128 1129 ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, 1130 reg, ®_value); 1131 if (ret < 0) { 1132 dev_err(di->dev, "%s read failed\n", __func__); 1133 goto exit_set_current; 1134 } 1135 1136 switch (reg) { 1137 case AB8500_MCH_IPT_CURLVL_REG: 1138 shift_value = MAIN_CH_INPUT_CURR_SHIFT; 1139 prev_curr_index = (reg_value >> shift_value); 1140 curr_index = ab8500_current_to_regval(di, ich); 1141 step_udelay = STEP_UDELAY; 1142 if (!di->ac.charger_connected) 1143 no_stepping = true; 1144 break; 1145 case AB8500_USBCH_IPT_CRNTLVL_REG: 1146 shift_value = VBUS_IN_CURR_LIM_SHIFT; 1147 prev_curr_index = (reg_value >> shift_value); 1148 curr_index = ab8500_vbus_in_curr_to_regval(di, ich); 1149 step_udelay = STEP_UDELAY * 100; 1150 1151 if (!di->usb.charger_connected) 1152 no_stepping = true; 1153 break; 1154 case AB8500_CH_OPT_CRNTLVL_REG: 1155 shift_value = 0; 1156 prev_curr_index = (reg_value >> shift_value); 1157 curr_index = ab8500_current_to_regval(di, ich); 1158 step_udelay = STEP_UDELAY; 1159 if (curr_index && (curr_index - prev_curr_index) > 1) 1160 step_udelay *= 100; 1161 1162 if (!di->usb.charger_connected && !di->ac.charger_connected) 1163 no_stepping = true; 1164 1165 break; 1166 default: 1167 dev_err(di->dev, "%s current register not valid\n", __func__); 1168 ret = -ENXIO; 1169 goto exit_set_current; 1170 } 1171 1172 if (curr_index < 0) { 1173 dev_err(di->dev, "requested current limit out-of-range\n"); 1174 ret = -ENXIO; 1175 goto exit_set_current; 1176 } 1177 1178 /* only update current if it's been changed */ 1179 if (prev_curr_index == curr_index) { 1180 dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n", 1181 __func__, reg); 1182 ret = 0; 1183 goto exit_set_current; 1184 } 1185 1186 dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n", 1187 __func__, ich, reg); 1188 1189 if (no_stepping) { 1190 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 1191 reg, (u8)curr_index << shift_value); 1192 if (ret) 1193 dev_err(di->dev, "%s write failed\n", __func__); 1194 } else if (prev_curr_index > curr_index) { 1195 for (i = prev_curr_index - 1; i >= curr_index; i--) { 1196 dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n", 1197 (u8) i << shift_value, reg); 1198 ret = abx500_set_register_interruptible(di->dev, 1199 AB8500_CHARGER, reg, (u8)i << shift_value); 1200 if (ret) { 1201 dev_err(di->dev, "%s write failed\n", __func__); 1202 goto exit_set_current; 1203 } 1204 if (i != curr_index) 1205 usleep_range(step_udelay, step_udelay * 2); 1206 } 1207 } else { 1208 bool allow = true; 1209 for (i = prev_curr_index + 1; i <= curr_index && allow; i++) { 1210 dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n", 1211 (u8)i << shift_value, reg); 1212 ret = abx500_set_register_interruptible(di->dev, 1213 AB8500_CHARGER, reg, (u8)i << shift_value); 1214 if (ret) { 1215 dev_err(di->dev, "%s write failed\n", __func__); 1216 goto exit_set_current; 1217 } 1218 if (i != curr_index) 1219 usleep_range(step_udelay, step_udelay * 2); 1220 1221 allow = ab8500_charger_check_continue_stepping(di, reg); 1222 } 1223 } 1224 1225 exit_set_current: 1226 atomic_dec(&di->current_stepping_sessions); 1227 1228 return ret; 1229 } 1230 1231 /** 1232 * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit 1233 * @di: pointer to the ab8500_charger structure 1234 * @ich_in: charger input current limit 1235 * 1236 * Sets the current that can be drawn from the USB host 1237 * Returns error code in case of failure else 0(on success) 1238 */ 1239 static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, 1240 int ich_in) 1241 { 1242 int min_value; 1243 int ret; 1244 1245 /* We should always use to lowest current limit */ 1246 min_value = min(di->bm->chg_params->usb_curr_max, ich_in); 1247 if (di->max_usb_in_curr.set_max > 0) 1248 min_value = min(di->max_usb_in_curr.set_max, min_value); 1249 1250 if (di->usb_state.usb_current >= 0) 1251 min_value = min(di->usb_state.usb_current, min_value); 1252 1253 switch (min_value) { 1254 case 100: 1255 if (di->vbat < VBAT_TRESH_IP_CUR_RED) 1256 min_value = USB_CH_IP_CUR_LVL_0P05; 1257 break; 1258 case 500: 1259 if (di->vbat < VBAT_TRESH_IP_CUR_RED) 1260 min_value = USB_CH_IP_CUR_LVL_0P45; 1261 break; 1262 default: 1263 break; 1264 } 1265 1266 dev_info(di->dev, "VBUS input current limit set to %d mA\n", min_value); 1267 1268 mutex_lock(&di->usb_ipt_crnt_lock); 1269 ret = ab8500_charger_set_current(di, min_value, 1270 AB8500_USBCH_IPT_CRNTLVL_REG); 1271 mutex_unlock(&di->usb_ipt_crnt_lock); 1272 1273 return ret; 1274 } 1275 1276 /** 1277 * ab8500_charger_set_main_in_curr() - set main charger input current 1278 * @di: pointer to the ab8500_charger structure 1279 * @ich_in: input charger current, in mA 1280 * 1281 * Set main charger input current. 1282 * Returns error code in case of failure else 0(on success) 1283 */ 1284 static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di, 1285 int ich_in) 1286 { 1287 return ab8500_charger_set_current(di, ich_in, 1288 AB8500_MCH_IPT_CURLVL_REG); 1289 } 1290 1291 /** 1292 * ab8500_charger_set_output_curr() - set charger output current 1293 * @di: pointer to the ab8500_charger structure 1294 * @ich_out: output charger current, in mA 1295 * 1296 * Set charger output current. 1297 * Returns error code in case of failure else 0(on success) 1298 */ 1299 static int ab8500_charger_set_output_curr(struct ab8500_charger *di, 1300 int ich_out) 1301 { 1302 return ab8500_charger_set_current(di, ich_out, 1303 AB8500_CH_OPT_CRNTLVL_REG); 1304 } 1305 1306 /** 1307 * ab8500_charger_led_en() - turn on/off chargign led 1308 * @di: pointer to the ab8500_charger structure 1309 * @on: flag to turn on/off the chargign led 1310 * 1311 * Power ON/OFF charging LED indication 1312 * Returns error code in case of failure else 0(on success) 1313 */ 1314 static int ab8500_charger_led_en(struct ab8500_charger *di, int on) 1315 { 1316 int ret; 1317 1318 if (on) { 1319 /* Power ON charging LED indicator, set LED current to 5mA */ 1320 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 1321 AB8500_LED_INDICATOR_PWM_CTRL, 1322 (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA)); 1323 if (ret) { 1324 dev_err(di->dev, "Power ON LED failed\n"); 1325 return ret; 1326 } 1327 /* LED indicator PWM duty cycle 252/256 */ 1328 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 1329 AB8500_LED_INDICATOR_PWM_DUTY, 1330 LED_INDICATOR_PWM_DUTY_252_256); 1331 if (ret) { 1332 dev_err(di->dev, "Set LED PWM duty cycle failed\n"); 1333 return ret; 1334 } 1335 } else { 1336 /* Power off charging LED indicator */ 1337 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 1338 AB8500_LED_INDICATOR_PWM_CTRL, 1339 LED_INDICATOR_PWM_DIS); 1340 if (ret) { 1341 dev_err(di->dev, "Power-off LED failed\n"); 1342 return ret; 1343 } 1344 } 1345 1346 return ret; 1347 } 1348 1349 /** 1350 * ab8500_charger_ac_en() - enable or disable ac charging 1351 * @di: pointer to the ab8500_charger structure 1352 * @enable: enable/disable flag 1353 * @vset: charging voltage 1354 * @iset: charging current 1355 * 1356 * Enable/Disable AC/Mains charging and turns on/off the charging led 1357 * respectively. 1358 **/ 1359 static int ab8500_charger_ac_en(struct ux500_charger *charger, 1360 int enable, int vset, int iset) 1361 { 1362 int ret; 1363 int volt_index; 1364 int curr_index; 1365 int input_curr_index; 1366 u8 overshoot = 0; 1367 1368 struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); 1369 1370 if (enable) { 1371 /* Check if AC is connected */ 1372 if (!di->ac.charger_connected) { 1373 dev_err(di->dev, "AC charger not connected\n"); 1374 return -ENXIO; 1375 } 1376 1377 /* Enable AC charging */ 1378 dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset); 1379 1380 /* 1381 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts 1382 * will be triggered every time we enable the VDD ADC supply. 1383 * This will turn off charging for a short while. 1384 * It can be avoided by having the supply on when 1385 * there is a charger enabled. Normally the VDD ADC supply 1386 * is enabled every time a GPADC conversion is triggered. 1387 * We will force it to be enabled from this driver to have 1388 * the GPADC module independent of the AB8500 chargers 1389 */ 1390 if (!di->vddadc_en_ac) { 1391 ret = regulator_enable(di->regu); 1392 if (ret) 1393 dev_warn(di->dev, 1394 "Failed to enable regulator\n"); 1395 else 1396 di->vddadc_en_ac = true; 1397 } 1398 1399 /* Check if the requested voltage or current is valid */ 1400 volt_index = ab8500_voltage_to_regval(vset); 1401 curr_index = ab8500_current_to_regval(di, iset); 1402 input_curr_index = ab8500_current_to_regval(di, 1403 di->bm->chg_params->ac_curr_max); 1404 if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) { 1405 dev_err(di->dev, 1406 "Charger voltage or current too high, " 1407 "charging not started\n"); 1408 return -ENXIO; 1409 } 1410 1411 /* ChVoltLevel: maximum battery charging voltage */ 1412 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 1413 AB8500_CH_VOLT_LVL_REG, (u8) volt_index); 1414 if (ret) { 1415 dev_err(di->dev, "%s write failed\n", __func__); 1416 return ret; 1417 } 1418 /* MainChInputCurr: current that can be drawn from the charger*/ 1419 ret = ab8500_charger_set_main_in_curr(di, 1420 di->bm->chg_params->ac_curr_max); 1421 if (ret) { 1422 dev_err(di->dev, "%s Failed to set MainChInputCurr\n", 1423 __func__); 1424 return ret; 1425 } 1426 /* ChOutputCurentLevel: protected output current */ 1427 ret = ab8500_charger_set_output_curr(di, iset); 1428 if (ret) { 1429 dev_err(di->dev, "%s " 1430 "Failed to set ChOutputCurentLevel\n", 1431 __func__); 1432 return ret; 1433 } 1434 1435 /* Check if VBAT overshoot control should be enabled */ 1436 if (!di->bm->enable_overshoot) 1437 overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N; 1438 1439 /* Enable Main Charger */ 1440 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 1441 AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot); 1442 if (ret) { 1443 dev_err(di->dev, "%s write failed\n", __func__); 1444 return ret; 1445 } 1446 1447 /* Power on charging LED indication */ 1448 ret = ab8500_charger_led_en(di, true); 1449 if (ret < 0) 1450 dev_err(di->dev, "failed to enable LED\n"); 1451 1452 di->ac.charger_online = 1; 1453 } else { 1454 /* Disable AC charging */ 1455 if (is_ab8500_1p1_or_earlier(di->parent)) { 1456 /* 1457 * For ABB revision 1.0 and 1.1 there is a bug in the 1458 * watchdog logic. That means we have to continuously 1459 * kick the charger watchdog even when no charger is 1460 * connected. This is only valid once the AC charger 1461 * has been enabled. This is a bug that is not handled 1462 * by the algorithm and the watchdog have to be kicked 1463 * by the charger driver when the AC charger 1464 * is disabled 1465 */ 1466 if (di->ac_conn) { 1467 queue_delayed_work(di->charger_wq, 1468 &di->kick_wd_work, 1469 round_jiffies(WD_KICK_INTERVAL)); 1470 } 1471 1472 /* 1473 * We can't turn off charging completely 1474 * due to a bug in AB8500 cut1. 1475 * If we do, charging will not start again. 1476 * That is why we set the lowest voltage 1477 * and current possible 1478 */ 1479 ret = abx500_set_register_interruptible(di->dev, 1480 AB8500_CHARGER, 1481 AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5); 1482 if (ret) { 1483 dev_err(di->dev, 1484 "%s write failed\n", __func__); 1485 return ret; 1486 } 1487 1488 ret = ab8500_charger_set_output_curr(di, 0); 1489 if (ret) { 1490 dev_err(di->dev, "%s " 1491 "Failed to set ChOutputCurentLevel\n", 1492 __func__); 1493 return ret; 1494 } 1495 } else { 1496 ret = abx500_set_register_interruptible(di->dev, 1497 AB8500_CHARGER, 1498 AB8500_MCH_CTRL1, 0); 1499 if (ret) { 1500 dev_err(di->dev, 1501 "%s write failed\n", __func__); 1502 return ret; 1503 } 1504 } 1505 1506 ret = ab8500_charger_led_en(di, false); 1507 if (ret < 0) 1508 dev_err(di->dev, "failed to disable LED\n"); 1509 1510 di->ac.charger_online = 0; 1511 di->ac.wd_expired = false; 1512 1513 /* Disable regulator if enabled */ 1514 if (di->vddadc_en_ac) { 1515 regulator_disable(di->regu); 1516 di->vddadc_en_ac = false; 1517 } 1518 1519 dev_dbg(di->dev, "%s Disabled AC charging\n", __func__); 1520 } 1521 ab8500_power_supply_changed(di, di->ac_chg.psy); 1522 1523 return ret; 1524 } 1525 1526 /** 1527 * ab8500_charger_usb_en() - enable usb charging 1528 * @di: pointer to the ab8500_charger structure 1529 * @enable: enable/disable flag 1530 * @vset: charging voltage 1531 * @ich_out: charger output current 1532 * 1533 * Enable/Disable USB charging and turns on/off the charging led respectively. 1534 * Returns error code in case of failure else 0(on success) 1535 */ 1536 static int ab8500_charger_usb_en(struct ux500_charger *charger, 1537 int enable, int vset, int ich_out) 1538 { 1539 int ret; 1540 int volt_index; 1541 int curr_index; 1542 u8 overshoot = 0; 1543 1544 struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); 1545 1546 if (enable) { 1547 /* Check if USB is connected */ 1548 if (!di->usb.charger_connected) { 1549 dev_err(di->dev, "USB charger not connected\n"); 1550 return -ENXIO; 1551 } 1552 1553 /* 1554 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts 1555 * will be triggered every time we enable the VDD ADC supply. 1556 * This will turn off charging for a short while. 1557 * It can be avoided by having the supply on when 1558 * there is a charger enabled. Normally the VDD ADC supply 1559 * is enabled every time a GPADC conversion is triggered. 1560 * We will force it to be enabled from this driver to have 1561 * the GPADC module independent of the AB8500 chargers 1562 */ 1563 if (!di->vddadc_en_usb) { 1564 ret = regulator_enable(di->regu); 1565 if (ret) 1566 dev_warn(di->dev, 1567 "Failed to enable regulator\n"); 1568 else 1569 di->vddadc_en_usb = true; 1570 } 1571 1572 /* Enable USB charging */ 1573 dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out); 1574 1575 /* Check if the requested voltage or current is valid */ 1576 volt_index = ab8500_voltage_to_regval(vset); 1577 curr_index = ab8500_current_to_regval(di, ich_out); 1578 if (volt_index < 0 || curr_index < 0) { 1579 dev_err(di->dev, 1580 "Charger voltage or current too high, " 1581 "charging not started\n"); 1582 return -ENXIO; 1583 } 1584 1585 /* 1586 * ChVoltLevel: max voltage up to which battery can be 1587 * charged 1588 */ 1589 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 1590 AB8500_CH_VOLT_LVL_REG, (u8) volt_index); 1591 if (ret) { 1592 dev_err(di->dev, "%s write failed\n", __func__); 1593 return ret; 1594 } 1595 /* Check if VBAT overshoot control should be enabled */ 1596 if (!di->bm->enable_overshoot) 1597 overshoot = USB_CHG_NO_OVERSHOOT_ENA_N; 1598 1599 /* Enable USB Charger */ 1600 dev_dbg(di->dev, 1601 "Enabling USB with write to AB8500_USBCH_CTRL1_REG\n"); 1602 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 1603 AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot); 1604 if (ret) { 1605 dev_err(di->dev, "%s write failed\n", __func__); 1606 return ret; 1607 } 1608 1609 /* If success power on charging LED indication */ 1610 ret = ab8500_charger_led_en(di, true); 1611 if (ret < 0) 1612 dev_err(di->dev, "failed to enable LED\n"); 1613 1614 di->usb.charger_online = 1; 1615 1616 /* USBChInputCurr: current that can be drawn from the usb */ 1617 ret = ab8500_charger_set_vbus_in_curr(di, 1618 di->max_usb_in_curr.usb_type_max); 1619 if (ret) { 1620 dev_err(di->dev, "setting USBChInputCurr failed\n"); 1621 return ret; 1622 } 1623 1624 /* ChOutputCurentLevel: protected output current */ 1625 ret = ab8500_charger_set_output_curr(di, ich_out); 1626 if (ret) { 1627 dev_err(di->dev, "%s " 1628 "Failed to set ChOutputCurentLevel\n", 1629 __func__); 1630 return ret; 1631 } 1632 1633 queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ); 1634 1635 } else { 1636 /* Disable USB charging */ 1637 dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); 1638 ret = abx500_set_register_interruptible(di->dev, 1639 AB8500_CHARGER, 1640 AB8500_USBCH_CTRL1_REG, 0); 1641 if (ret) { 1642 dev_err(di->dev, 1643 "%s write failed\n", __func__); 1644 return ret; 1645 } 1646 1647 ret = ab8500_charger_led_en(di, false); 1648 if (ret < 0) 1649 dev_err(di->dev, "failed to disable LED\n"); 1650 /* USBChInputCurr: current that can be drawn from the usb */ 1651 ret = ab8500_charger_set_vbus_in_curr(di, 0); 1652 if (ret) { 1653 dev_err(di->dev, "setting USBChInputCurr failed\n"); 1654 return ret; 1655 } 1656 1657 /* ChOutputCurentLevel: protected output current */ 1658 ret = ab8500_charger_set_output_curr(di, 0); 1659 if (ret) { 1660 dev_err(di->dev, "%s " 1661 "Failed to reset ChOutputCurentLevel\n", 1662 __func__); 1663 return ret; 1664 } 1665 di->usb.charger_online = 0; 1666 di->usb.wd_expired = false; 1667 1668 /* Disable regulator if enabled */ 1669 if (di->vddadc_en_usb) { 1670 regulator_disable(di->regu); 1671 di->vddadc_en_usb = false; 1672 } 1673 1674 dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); 1675 1676 /* Cancel any pending Vbat check work */ 1677 cancel_delayed_work(&di->check_vbat_work); 1678 1679 } 1680 ab8500_power_supply_changed(di, di->usb_chg.psy); 1681 1682 return ret; 1683 } 1684 1685 static int ab8500_external_charger_prepare(struct notifier_block *charger_nb, 1686 unsigned long event, void *data) 1687 { 1688 int ret; 1689 struct device *dev = data; 1690 /*Toggle External charger control pin*/ 1691 ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK, 1692 AB8500_SYS_CHARGER_CONTROL_REG, 1693 EXTERNAL_CHARGER_DISABLE_REG_VAL); 1694 if (ret < 0) { 1695 dev_err(dev, "write reg failed %d\n", ret); 1696 goto out; 1697 } 1698 ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK, 1699 AB8500_SYS_CHARGER_CONTROL_REG, 1700 EXTERNAL_CHARGER_ENABLE_REG_VAL); 1701 if (ret < 0) 1702 dev_err(dev, "Write reg failed %d\n", ret); 1703 1704 out: 1705 return ret; 1706 } 1707 1708 /** 1709 * ab8500_charger_usb_check_enable() - enable usb charging 1710 * @charger: pointer to the ux500_charger structure 1711 * @vset: charging voltage 1712 * @iset: charger output current 1713 * 1714 * Check if the VBUS charger has been disconnected and reconnected without 1715 * AB8500 rising an interrupt. Returns 0 on success. 1716 */ 1717 static int ab8500_charger_usb_check_enable(struct ux500_charger *charger, 1718 int vset, int iset) 1719 { 1720 u8 usbch_ctrl1 = 0; 1721 int ret = 0; 1722 1723 struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); 1724 1725 if (!di->usb.charger_connected) 1726 return ret; 1727 1728 ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, 1729 AB8500_USBCH_CTRL1_REG, &usbch_ctrl1); 1730 if (ret < 0) { 1731 dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); 1732 return ret; 1733 } 1734 dev_dbg(di->dev, "USB charger ctrl: 0x%02x\n", usbch_ctrl1); 1735 1736 if (!(usbch_ctrl1 & USB_CH_ENA)) { 1737 dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n"); 1738 1739 ret = abx500_mask_and_set_register_interruptible(di->dev, 1740 AB8500_CHARGER, AB8500_CHARGER_CTRL, 1741 DROP_COUNT_RESET, DROP_COUNT_RESET); 1742 if (ret < 0) { 1743 dev_err(di->dev, "ab8500 write failed %d\n", __LINE__); 1744 return ret; 1745 } 1746 1747 ret = ab8500_charger_usb_en(&di->usb_chg, true, vset, iset); 1748 if (ret < 0) { 1749 dev_err(di->dev, "Failed to enable VBUS charger %d\n", 1750 __LINE__); 1751 return ret; 1752 } 1753 } 1754 return ret; 1755 } 1756 1757 /** 1758 * ab8500_charger_ac_check_enable() - enable usb charging 1759 * @charger: pointer to the ux500_charger structure 1760 * @vset: charging voltage 1761 * @iset: charger output current 1762 * 1763 * Check if the AC charger has been disconnected and reconnected without 1764 * AB8500 rising an interrupt. Returns 0 on success. 1765 */ 1766 static int ab8500_charger_ac_check_enable(struct ux500_charger *charger, 1767 int vset, int iset) 1768 { 1769 u8 mainch_ctrl1 = 0; 1770 int ret = 0; 1771 1772 struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); 1773 1774 if (!di->ac.charger_connected) 1775 return ret; 1776 1777 ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, 1778 AB8500_MCH_CTRL1, &mainch_ctrl1); 1779 if (ret < 0) { 1780 dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); 1781 return ret; 1782 } 1783 dev_dbg(di->dev, "AC charger ctrl: 0x%02x\n", mainch_ctrl1); 1784 1785 if (!(mainch_ctrl1 & MAIN_CH_ENA)) { 1786 dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n"); 1787 1788 ret = abx500_mask_and_set_register_interruptible(di->dev, 1789 AB8500_CHARGER, AB8500_CHARGER_CTRL, 1790 DROP_COUNT_RESET, DROP_COUNT_RESET); 1791 1792 if (ret < 0) { 1793 dev_err(di->dev, "ab8500 write failed %d\n", __LINE__); 1794 return ret; 1795 } 1796 1797 ret = ab8500_charger_ac_en(&di->usb_chg, true, vset, iset); 1798 if (ret < 0) { 1799 dev_err(di->dev, "failed to enable AC charger %d\n", 1800 __LINE__); 1801 return ret; 1802 } 1803 } 1804 return ret; 1805 } 1806 1807 /** 1808 * ab8500_charger_watchdog_kick() - kick charger watchdog 1809 * @di: pointer to the ab8500_charger structure 1810 * 1811 * Kick charger watchdog 1812 * Returns error code in case of failure else 0(on success) 1813 */ 1814 static int ab8500_charger_watchdog_kick(struct ux500_charger *charger) 1815 { 1816 int ret; 1817 struct ab8500_charger *di; 1818 1819 if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS) 1820 di = to_ab8500_charger_ac_device_info(charger); 1821 else if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB) 1822 di = to_ab8500_charger_usb_device_info(charger); 1823 else 1824 return -ENXIO; 1825 1826 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 1827 AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); 1828 if (ret) 1829 dev_err(di->dev, "Failed to kick WD!\n"); 1830 1831 return ret; 1832 } 1833 1834 /** 1835 * ab8500_charger_update_charger_current() - update charger current 1836 * @di: pointer to the ab8500_charger structure 1837 * 1838 * Update the charger output current for the specified charger 1839 * Returns error code in case of failure else 0(on success) 1840 */ 1841 static int ab8500_charger_update_charger_current(struct ux500_charger *charger, 1842 int ich_out) 1843 { 1844 int ret; 1845 struct ab8500_charger *di; 1846 1847 if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS) 1848 di = to_ab8500_charger_ac_device_info(charger); 1849 else if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB) 1850 di = to_ab8500_charger_usb_device_info(charger); 1851 else 1852 return -ENXIO; 1853 1854 ret = ab8500_charger_set_output_curr(di, ich_out); 1855 if (ret) { 1856 dev_err(di->dev, "%s " 1857 "Failed to set ChOutputCurentLevel\n", 1858 __func__); 1859 return ret; 1860 } 1861 1862 /* Reset the main and usb drop input current measurement counter */ 1863 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 1864 AB8500_CHARGER_CTRL, DROP_COUNT_RESET); 1865 if (ret) { 1866 dev_err(di->dev, "%s write failed\n", __func__); 1867 return ret; 1868 } 1869 1870 return ret; 1871 } 1872 1873 static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data) 1874 { 1875 struct power_supply *psy; 1876 struct power_supply *ext = dev_get_drvdata(dev); 1877 const char **supplicants = (const char **)ext->supplied_to; 1878 struct ab8500_charger *di; 1879 union power_supply_propval ret; 1880 int j; 1881 struct ux500_charger *usb_chg; 1882 1883 usb_chg = (struct ux500_charger *)data; 1884 psy = usb_chg->psy; 1885 1886 di = to_ab8500_charger_usb_device_info(usb_chg); 1887 1888 /* For all psy where the driver name appears in any supplied_to */ 1889 j = match_string(supplicants, ext->num_supplicants, psy->desc->name); 1890 if (j < 0) 1891 return 0; 1892 1893 /* Go through all properties for the psy */ 1894 for (j = 0; j < ext->desc->num_properties; j++) { 1895 enum power_supply_property prop; 1896 prop = ext->desc->properties[j]; 1897 1898 if (power_supply_get_property(ext, prop, &ret)) 1899 continue; 1900 1901 switch (prop) { 1902 case POWER_SUPPLY_PROP_VOLTAGE_NOW: 1903 switch (ext->desc->type) { 1904 case POWER_SUPPLY_TYPE_BATTERY: 1905 di->vbat = ret.intval / 1000; 1906 break; 1907 default: 1908 break; 1909 } 1910 break; 1911 default: 1912 break; 1913 } 1914 } 1915 return 0; 1916 } 1917 1918 /** 1919 * ab8500_charger_check_vbat_work() - keep vbus current within spec 1920 * @work pointer to the work_struct structure 1921 * 1922 * Due to a asic bug it is necessary to lower the input current to the vbus 1923 * charger when charging with at some specific levels. This issue is only valid 1924 * for below a certain battery voltage. This function makes sure that the 1925 * the allowed current limit isn't exceeded. 1926 */ 1927 static void ab8500_charger_check_vbat_work(struct work_struct *work) 1928 { 1929 int t = 10; 1930 struct ab8500_charger *di = container_of(work, 1931 struct ab8500_charger, check_vbat_work.work); 1932 1933 class_for_each_device(power_supply_class, NULL, 1934 di->usb_chg.psy, ab8500_charger_get_ext_psy_data); 1935 1936 /* First run old_vbat is 0. */ 1937 if (di->old_vbat == 0) 1938 di->old_vbat = di->vbat; 1939 1940 if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED && 1941 di->vbat <= VBAT_TRESH_IP_CUR_RED) || 1942 (di->old_vbat > VBAT_TRESH_IP_CUR_RED && 1943 di->vbat > VBAT_TRESH_IP_CUR_RED))) { 1944 1945 dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d," 1946 " old: %d\n", di->max_usb_in_curr.usb_type_max, 1947 di->vbat, di->old_vbat); 1948 ab8500_charger_set_vbus_in_curr(di, 1949 di->max_usb_in_curr.usb_type_max); 1950 power_supply_changed(di->usb_chg.psy); 1951 } 1952 1953 di->old_vbat = di->vbat; 1954 1955 /* 1956 * No need to check the battery voltage every second when not close to 1957 * the threshold. 1958 */ 1959 if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) && 1960 (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100))) 1961 t = 1; 1962 1963 queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ); 1964 } 1965 1966 /** 1967 * ab8500_charger_check_hw_failure_work() - check main charger failure 1968 * @work: pointer to the work_struct structure 1969 * 1970 * Work queue function for checking the main charger status 1971 */ 1972 static void ab8500_charger_check_hw_failure_work(struct work_struct *work) 1973 { 1974 int ret; 1975 u8 reg_value; 1976 1977 struct ab8500_charger *di = container_of(work, 1978 struct ab8500_charger, check_hw_failure_work.work); 1979 1980 /* Check if the status bits for HW failure is still active */ 1981 if (di->flags.mainextchnotok) { 1982 ret = abx500_get_register_interruptible(di->dev, 1983 AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); 1984 if (ret < 0) { 1985 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 1986 return; 1987 } 1988 if (!(reg_value & MAIN_CH_NOK)) { 1989 di->flags.mainextchnotok = false; 1990 ab8500_power_supply_changed(di, di->ac_chg.psy); 1991 } 1992 } 1993 if (di->flags.vbus_ovv) { 1994 ret = abx500_get_register_interruptible(di->dev, 1995 AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, 1996 ®_value); 1997 if (ret < 0) { 1998 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 1999 return; 2000 } 2001 if (!(reg_value & VBUS_OVV_TH)) { 2002 di->flags.vbus_ovv = false; 2003 ab8500_power_supply_changed(di, di->usb_chg.psy); 2004 } 2005 } 2006 /* If we still have a failure, schedule a new check */ 2007 if (di->flags.mainextchnotok || di->flags.vbus_ovv) { 2008 queue_delayed_work(di->charger_wq, 2009 &di->check_hw_failure_work, round_jiffies(HZ)); 2010 } 2011 } 2012 2013 /** 2014 * ab8500_charger_kick_watchdog_work() - kick the watchdog 2015 * @work: pointer to the work_struct structure 2016 * 2017 * Work queue function for kicking the charger watchdog. 2018 * 2019 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog 2020 * logic. That means we have to continuously kick the charger 2021 * watchdog even when no charger is connected. This is only 2022 * valid once the AC charger has been enabled. This is 2023 * a bug that is not handled by the algorithm and the 2024 * watchdog have to be kicked by the charger driver 2025 * when the AC charger is disabled 2026 */ 2027 static void ab8500_charger_kick_watchdog_work(struct work_struct *work) 2028 { 2029 int ret; 2030 2031 struct ab8500_charger *di = container_of(work, 2032 struct ab8500_charger, kick_wd_work.work); 2033 2034 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 2035 AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); 2036 if (ret) 2037 dev_err(di->dev, "Failed to kick WD!\n"); 2038 2039 /* Schedule a new watchdog kick */ 2040 queue_delayed_work(di->charger_wq, 2041 &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL)); 2042 } 2043 2044 /** 2045 * ab8500_charger_ac_work() - work to get and set main charger status 2046 * @work: pointer to the work_struct structure 2047 * 2048 * Work queue function for checking the main charger status 2049 */ 2050 static void ab8500_charger_ac_work(struct work_struct *work) 2051 { 2052 int ret; 2053 2054 struct ab8500_charger *di = container_of(work, 2055 struct ab8500_charger, ac_work); 2056 2057 /* 2058 * Since we can't be sure that the events are received 2059 * synchronously, we have the check if the main charger is 2060 * connected by reading the status register 2061 */ 2062 ret = ab8500_charger_detect_chargers(di, false); 2063 if (ret < 0) 2064 return; 2065 2066 if (ret & AC_PW_CONN) { 2067 di->ac.charger_connected = 1; 2068 di->ac_conn = true; 2069 } else { 2070 di->ac.charger_connected = 0; 2071 } 2072 2073 ab8500_power_supply_changed(di, di->ac_chg.psy); 2074 sysfs_notify(&di->ac_chg.psy->dev.kobj, NULL, "present"); 2075 } 2076 2077 static void ab8500_charger_usb_attached_work(struct work_struct *work) 2078 { 2079 struct ab8500_charger *di = container_of(work, 2080 struct ab8500_charger, 2081 usb_charger_attached_work.work); 2082 int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC); 2083 int ret, i; 2084 u8 statval; 2085 2086 for (i = 0; i < 10; i++) { 2087 ret = abx500_get_register_interruptible(di->dev, 2088 AB8500_CHARGER, 2089 AB8500_CH_USBCH_STAT1_REG, 2090 &statval); 2091 if (ret < 0) { 2092 dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); 2093 goto reschedule; 2094 } 2095 if ((statval & usbch) != usbch) 2096 goto reschedule; 2097 2098 msleep(CHARGER_STATUS_POLL); 2099 } 2100 2101 ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0); 2102 2103 mutex_lock(&di->charger_attached_mutex); 2104 mutex_unlock(&di->charger_attached_mutex); 2105 2106 return; 2107 2108 reschedule: 2109 queue_delayed_work(di->charger_wq, 2110 &di->usb_charger_attached_work, 2111 HZ); 2112 } 2113 2114 static void ab8500_charger_ac_attached_work(struct work_struct *work) 2115 { 2116 2117 struct ab8500_charger *di = container_of(work, 2118 struct ab8500_charger, 2119 ac_charger_attached_work.work); 2120 int mainch = (MAIN_CH_STATUS2_MAINCHGDROP | 2121 MAIN_CH_STATUS2_MAINCHARGERDETDBNC); 2122 int ret, i; 2123 u8 statval; 2124 2125 for (i = 0; i < 10; i++) { 2126 ret = abx500_get_register_interruptible(di->dev, 2127 AB8500_CHARGER, 2128 AB8500_CH_STATUS2_REG, 2129 &statval); 2130 if (ret < 0) { 2131 dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); 2132 goto reschedule; 2133 } 2134 2135 if ((statval & mainch) != mainch) 2136 goto reschedule; 2137 2138 msleep(CHARGER_STATUS_POLL); 2139 } 2140 2141 ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0); 2142 queue_work(di->charger_wq, &di->ac_work); 2143 2144 mutex_lock(&di->charger_attached_mutex); 2145 mutex_unlock(&di->charger_attached_mutex); 2146 2147 return; 2148 2149 reschedule: 2150 queue_delayed_work(di->charger_wq, 2151 &di->ac_charger_attached_work, 2152 HZ); 2153 } 2154 2155 /** 2156 * ab8500_charger_detect_usb_type_work() - work to detect USB type 2157 * @work: Pointer to the work_struct structure 2158 * 2159 * Detect the type of USB plugged 2160 */ 2161 static void ab8500_charger_detect_usb_type_work(struct work_struct *work) 2162 { 2163 int ret; 2164 2165 struct ab8500_charger *di = container_of(work, 2166 struct ab8500_charger, detect_usb_type_work); 2167 2168 /* 2169 * Since we can't be sure that the events are received 2170 * synchronously, we have the check if is 2171 * connected by reading the status register 2172 */ 2173 ret = ab8500_charger_detect_chargers(di, false); 2174 if (ret < 0) 2175 return; 2176 2177 if (!(ret & USB_PW_CONN)) { 2178 dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__); 2179 di->vbus_detected = false; 2180 ab8500_charger_set_usb_connected(di, false); 2181 ab8500_power_supply_changed(di, di->usb_chg.psy); 2182 } else { 2183 dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__); 2184 di->vbus_detected = true; 2185 2186 if (is_ab8500_1p1_or_earlier(di->parent)) { 2187 ret = ab8500_charger_detect_usb_type(di); 2188 if (!ret) { 2189 ab8500_charger_set_usb_connected(di, true); 2190 ab8500_power_supply_changed(di, 2191 di->usb_chg.psy); 2192 } 2193 } else { 2194 /* 2195 * For ABB cut2.0 and onwards we have an IRQ, 2196 * USB_LINK_STATUS that will be triggered when the USB 2197 * link status changes. The exception is USB connected 2198 * during startup. Then we don't get a 2199 * USB_LINK_STATUS IRQ 2200 */ 2201 if (di->vbus_detected_start) { 2202 di->vbus_detected_start = false; 2203 ret = ab8500_charger_detect_usb_type(di); 2204 if (!ret) { 2205 ab8500_charger_set_usb_connected(di, 2206 true); 2207 ab8500_power_supply_changed(di, 2208 di->usb_chg.psy); 2209 } 2210 } 2211 } 2212 } 2213 } 2214 2215 /** 2216 * ab8500_charger_usb_link_attach_work() - work to detect USB type 2217 * @work: pointer to the work_struct structure 2218 * 2219 * Detect the type of USB plugged 2220 */ 2221 static void ab8500_charger_usb_link_attach_work(struct work_struct *work) 2222 { 2223 struct ab8500_charger *di = 2224 container_of(work, struct ab8500_charger, attach_work.work); 2225 int ret; 2226 2227 /* Update maximum input current if USB enumeration is not detected */ 2228 if (!di->usb.charger_online) { 2229 ret = ab8500_charger_set_vbus_in_curr(di, 2230 di->max_usb_in_curr.usb_type_max); 2231 if (ret) 2232 return; 2233 } 2234 2235 ab8500_charger_set_usb_connected(di, true); 2236 ab8500_power_supply_changed(di, di->usb_chg.psy); 2237 } 2238 2239 /** 2240 * ab8500_charger_usb_link_status_work() - work to detect USB type 2241 * @work: pointer to the work_struct structure 2242 * 2243 * Detect the type of USB plugged 2244 */ 2245 static void ab8500_charger_usb_link_status_work(struct work_struct *work) 2246 { 2247 int detected_chargers; 2248 int ret; 2249 u8 val; 2250 u8 link_status; 2251 2252 struct ab8500_charger *di = container_of(work, 2253 struct ab8500_charger, usb_link_status_work); 2254 2255 /* 2256 * Since we can't be sure that the events are received 2257 * synchronously, we have the check if is 2258 * connected by reading the status register 2259 */ 2260 detected_chargers = ab8500_charger_detect_chargers(di, false); 2261 if (detected_chargers < 0) 2262 return; 2263 2264 /* 2265 * Some chargers that breaks the USB spec is 2266 * identified as invalid by AB8500 and it refuse 2267 * to start the charging process. but by jumping 2268 * through a few hoops it can be forced to start. 2269 */ 2270 if (is_ab8500(di->parent)) 2271 ret = abx500_get_register_interruptible(di->dev, AB8500_USB, 2272 AB8500_USB_LINE_STAT_REG, &val); 2273 else 2274 ret = abx500_get_register_interruptible(di->dev, AB8500_USB, 2275 AB8500_USB_LINK1_STAT_REG, &val); 2276 2277 if (ret >= 0) 2278 dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val); 2279 else 2280 dev_dbg(di->dev, "Error reading USB link status\n"); 2281 2282 if (is_ab8500(di->parent)) 2283 link_status = AB8500_USB_LINK_STATUS; 2284 else 2285 link_status = AB8505_USB_LINK_STATUS; 2286 2287 if (detected_chargers & USB_PW_CONN) { 2288 if (((val & link_status) >> USB_LINK_STATUS_SHIFT) == 2289 USB_STAT_NOT_VALID_LINK && 2290 di->invalid_charger_detect_state == 0) { 2291 dev_dbg(di->dev, 2292 "Invalid charger detected, state= 0\n"); 2293 /*Enable charger*/ 2294 abx500_mask_and_set_register_interruptible(di->dev, 2295 AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, 2296 USB_CH_ENA, USB_CH_ENA); 2297 /*Enable charger detection*/ 2298 abx500_mask_and_set_register_interruptible(di->dev, 2299 AB8500_USB, AB8500_USB_LINE_CTRL2_REG, 2300 USB_CH_DET, USB_CH_DET); 2301 di->invalid_charger_detect_state = 1; 2302 /*exit and wait for new link status interrupt.*/ 2303 return; 2304 2305 } 2306 if (di->invalid_charger_detect_state == 1) { 2307 dev_dbg(di->dev, 2308 "Invalid charger detected, state= 1\n"); 2309 /*Stop charger detection*/ 2310 abx500_mask_and_set_register_interruptible(di->dev, 2311 AB8500_USB, AB8500_USB_LINE_CTRL2_REG, 2312 USB_CH_DET, 0x00); 2313 /*Check link status*/ 2314 if (is_ab8500(di->parent)) 2315 ret = abx500_get_register_interruptible(di->dev, 2316 AB8500_USB, AB8500_USB_LINE_STAT_REG, 2317 &val); 2318 else 2319 ret = abx500_get_register_interruptible(di->dev, 2320 AB8500_USB, AB8500_USB_LINK1_STAT_REG, 2321 &val); 2322 2323 dev_dbg(di->dev, "USB link status= 0x%02x\n", 2324 (val & link_status) >> USB_LINK_STATUS_SHIFT); 2325 di->invalid_charger_detect_state = 2; 2326 } 2327 } else { 2328 di->invalid_charger_detect_state = 0; 2329 } 2330 2331 if (!(detected_chargers & USB_PW_CONN)) { 2332 di->vbus_detected = false; 2333 ab8500_charger_set_usb_connected(di, false); 2334 ab8500_power_supply_changed(di, di->usb_chg.psy); 2335 return; 2336 } 2337 2338 dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__); 2339 di->vbus_detected = true; 2340 ret = ab8500_charger_read_usb_type(di); 2341 if (ret) { 2342 if (ret == -ENXIO) { 2343 /* No valid charger type detected */ 2344 ab8500_charger_set_usb_connected(di, false); 2345 ab8500_power_supply_changed(di, di->usb_chg.psy); 2346 } 2347 return; 2348 } 2349 2350 if (di->usb_device_is_unrecognised) { 2351 dev_dbg(di->dev, 2352 "Potential Legacy Charger device. " 2353 "Delay work for %d msec for USB enum " 2354 "to finish", 2355 WAIT_ACA_RID_ENUMERATION); 2356 queue_delayed_work(di->charger_wq, 2357 &di->attach_work, 2358 msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); 2359 } else if (di->is_aca_rid == 1) { 2360 /* Only wait once */ 2361 di->is_aca_rid++; 2362 dev_dbg(di->dev, 2363 "%s Wait %d msec for USB enum to finish", 2364 __func__, WAIT_ACA_RID_ENUMERATION); 2365 queue_delayed_work(di->charger_wq, 2366 &di->attach_work, 2367 msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); 2368 } else { 2369 queue_delayed_work(di->charger_wq, 2370 &di->attach_work, 2371 0); 2372 } 2373 } 2374 2375 static void ab8500_charger_usb_state_changed_work(struct work_struct *work) 2376 { 2377 int ret; 2378 unsigned long flags; 2379 2380 struct ab8500_charger *di = container_of(work, 2381 struct ab8500_charger, usb_state_changed_work.work); 2382 2383 if (!di->vbus_detected) { 2384 dev_dbg(di->dev, 2385 "%s !di->vbus_detected\n", 2386 __func__); 2387 return; 2388 } 2389 2390 spin_lock_irqsave(&di->usb_state.usb_lock, flags); 2391 di->usb_state.state = di->usb_state.state_tmp; 2392 di->usb_state.usb_current = di->usb_state.usb_current_tmp; 2393 spin_unlock_irqrestore(&di->usb_state.usb_lock, flags); 2394 2395 dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n", 2396 __func__, di->usb_state.state, di->usb_state.usb_current); 2397 2398 switch (di->usb_state.state) { 2399 case AB8500_BM_USB_STATE_RESET_HS: 2400 case AB8500_BM_USB_STATE_RESET_FS: 2401 case AB8500_BM_USB_STATE_SUSPEND: 2402 case AB8500_BM_USB_STATE_MAX: 2403 ab8500_charger_set_usb_connected(di, false); 2404 ab8500_power_supply_changed(di, di->usb_chg.psy); 2405 break; 2406 2407 case AB8500_BM_USB_STATE_RESUME: 2408 /* 2409 * when suspend->resume there should be delay 2410 * of 1sec for enabling charging 2411 */ 2412 msleep(1000); 2413 fallthrough; 2414 case AB8500_BM_USB_STATE_CONFIGURED: 2415 /* 2416 * USB is configured, enable charging with the charging 2417 * input current obtained from USB driver 2418 */ 2419 if (!ab8500_charger_get_usb_cur(di)) { 2420 /* Update maximum input current */ 2421 ret = ab8500_charger_set_vbus_in_curr(di, 2422 di->max_usb_in_curr.usb_type_max); 2423 if (ret) 2424 return; 2425 2426 ab8500_charger_set_usb_connected(di, true); 2427 ab8500_power_supply_changed(di, di->usb_chg.psy); 2428 } 2429 break; 2430 2431 default: 2432 break; 2433 } 2434 } 2435 2436 /** 2437 * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status 2438 * @work: pointer to the work_struct structure 2439 * 2440 * Work queue function for checking the USB charger Not OK status 2441 */ 2442 static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work) 2443 { 2444 int ret; 2445 u8 reg_value; 2446 bool prev_status; 2447 2448 struct ab8500_charger *di = container_of(work, 2449 struct ab8500_charger, check_usbchgnotok_work.work); 2450 2451 /* Check if the status bit for usbchargernotok is still active */ 2452 ret = abx500_get_register_interruptible(di->dev, 2453 AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); 2454 if (ret < 0) { 2455 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 2456 return; 2457 } 2458 prev_status = di->flags.usbchargernotok; 2459 2460 if (reg_value & VBUS_CH_NOK) { 2461 di->flags.usbchargernotok = true; 2462 /* Check again in 1sec */ 2463 queue_delayed_work(di->charger_wq, 2464 &di->check_usbchgnotok_work, HZ); 2465 } else { 2466 di->flags.usbchargernotok = false; 2467 di->flags.vbus_collapse = false; 2468 } 2469 2470 if (prev_status != di->flags.usbchargernotok) 2471 ab8500_power_supply_changed(di, di->usb_chg.psy); 2472 } 2473 2474 /** 2475 * ab8500_charger_check_main_thermal_prot_work() - check main thermal status 2476 * @work: pointer to the work_struct structure 2477 * 2478 * Work queue function for checking the Main thermal prot status 2479 */ 2480 static void ab8500_charger_check_main_thermal_prot_work( 2481 struct work_struct *work) 2482 { 2483 int ret; 2484 u8 reg_value; 2485 2486 struct ab8500_charger *di = container_of(work, 2487 struct ab8500_charger, check_main_thermal_prot_work); 2488 2489 /* Check if the status bit for main_thermal_prot is still active */ 2490 ret = abx500_get_register_interruptible(di->dev, 2491 AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); 2492 if (ret < 0) { 2493 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 2494 return; 2495 } 2496 if (reg_value & MAIN_CH_TH_PROT) 2497 di->flags.main_thermal_prot = true; 2498 else 2499 di->flags.main_thermal_prot = false; 2500 2501 ab8500_power_supply_changed(di, di->ac_chg.psy); 2502 } 2503 2504 /** 2505 * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status 2506 * @work: pointer to the work_struct structure 2507 * 2508 * Work queue function for checking the USB thermal prot status 2509 */ 2510 static void ab8500_charger_check_usb_thermal_prot_work( 2511 struct work_struct *work) 2512 { 2513 int ret; 2514 u8 reg_value; 2515 2516 struct ab8500_charger *di = container_of(work, 2517 struct ab8500_charger, check_usb_thermal_prot_work); 2518 2519 /* Check if the status bit for usb_thermal_prot is still active */ 2520 ret = abx500_get_register_interruptible(di->dev, 2521 AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); 2522 if (ret < 0) { 2523 dev_err(di->dev, "%s ab8500 read failed\n", __func__); 2524 return; 2525 } 2526 if (reg_value & USB_CH_TH_PROT) 2527 di->flags.usb_thermal_prot = true; 2528 else 2529 di->flags.usb_thermal_prot = false; 2530 2531 ab8500_power_supply_changed(di, di->usb_chg.psy); 2532 } 2533 2534 /** 2535 * ab8500_charger_mainchunplugdet_handler() - main charger unplugged 2536 * @irq: interrupt number 2537 * @_di: pointer to the ab8500_charger structure 2538 * 2539 * Returns IRQ status(IRQ_HANDLED) 2540 */ 2541 static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di) 2542 { 2543 struct ab8500_charger *di = _di; 2544 2545 dev_dbg(di->dev, "Main charger unplugged\n"); 2546 queue_work(di->charger_wq, &di->ac_work); 2547 2548 cancel_delayed_work_sync(&di->ac_charger_attached_work); 2549 mutex_lock(&di->charger_attached_mutex); 2550 mutex_unlock(&di->charger_attached_mutex); 2551 2552 return IRQ_HANDLED; 2553 } 2554 2555 /** 2556 * ab8500_charger_mainchplugdet_handler() - main charger plugged 2557 * @irq: interrupt number 2558 * @_di: pointer to the ab8500_charger structure 2559 * 2560 * Returns IRQ status(IRQ_HANDLED) 2561 */ 2562 static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di) 2563 { 2564 struct ab8500_charger *di = _di; 2565 2566 dev_dbg(di->dev, "Main charger plugged\n"); 2567 queue_work(di->charger_wq, &di->ac_work); 2568 2569 mutex_lock(&di->charger_attached_mutex); 2570 mutex_unlock(&di->charger_attached_mutex); 2571 2572 if (is_ab8500(di->parent)) 2573 queue_delayed_work(di->charger_wq, 2574 &di->ac_charger_attached_work, 2575 HZ); 2576 return IRQ_HANDLED; 2577 } 2578 2579 /** 2580 * ab8500_charger_mainextchnotok_handler() - main charger not ok 2581 * @irq: interrupt number 2582 * @_di: pointer to the ab8500_charger structure 2583 * 2584 * Returns IRQ status(IRQ_HANDLED) 2585 */ 2586 static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di) 2587 { 2588 struct ab8500_charger *di = _di; 2589 2590 dev_dbg(di->dev, "Main charger not ok\n"); 2591 di->flags.mainextchnotok = true; 2592 ab8500_power_supply_changed(di, di->ac_chg.psy); 2593 2594 /* Schedule a new HW failure check */ 2595 queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); 2596 2597 return IRQ_HANDLED; 2598 } 2599 2600 /** 2601 * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger 2602 * thermal protection threshold 2603 * @irq: interrupt number 2604 * @_di: pointer to the ab8500_charger structure 2605 * 2606 * Returns IRQ status(IRQ_HANDLED) 2607 */ 2608 static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di) 2609 { 2610 struct ab8500_charger *di = _di; 2611 2612 dev_dbg(di->dev, 2613 "Die temp above Main charger thermal protection threshold\n"); 2614 queue_work(di->charger_wq, &di->check_main_thermal_prot_work); 2615 2616 return IRQ_HANDLED; 2617 } 2618 2619 /** 2620 * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger 2621 * thermal protection threshold 2622 * @irq: interrupt number 2623 * @_di: pointer to the ab8500_charger structure 2624 * 2625 * Returns IRQ status(IRQ_HANDLED) 2626 */ 2627 static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di) 2628 { 2629 struct ab8500_charger *di = _di; 2630 2631 dev_dbg(di->dev, 2632 "Die temp ok for Main charger thermal protection threshold\n"); 2633 queue_work(di->charger_wq, &di->check_main_thermal_prot_work); 2634 2635 return IRQ_HANDLED; 2636 } 2637 2638 static void ab8500_charger_vbus_drop_end_work(struct work_struct *work) 2639 { 2640 struct ab8500_charger *di = container_of(work, 2641 struct ab8500_charger, vbus_drop_end_work.work); 2642 int ret, curr; 2643 u8 reg_value; 2644 2645 di->flags.vbus_drop_end = false; 2646 2647 /* Reset the drop counter */ 2648 abx500_set_register_interruptible(di->dev, 2649 AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01); 2650 2651 ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, 2652 AB8500_CH_USBCH_STAT2_REG, ®_value); 2653 if (ret < 0) { 2654 dev_err(di->dev, "%s read failed\n", __func__); 2655 return; 2656 } 2657 2658 curr = di->bm->chg_input_curr[ 2659 reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT]; 2660 2661 if (di->max_usb_in_curr.calculated_max != curr) { 2662 /* USB source is collapsing */ 2663 di->max_usb_in_curr.calculated_max = curr; 2664 dev_dbg(di->dev, 2665 "VBUS input current limiting to %d mA\n", 2666 di->max_usb_in_curr.calculated_max); 2667 } else { 2668 /* 2669 * USB source can not give more than this amount. 2670 * Taking more will collapse the source. 2671 */ 2672 di->max_usb_in_curr.set_max = 2673 di->max_usb_in_curr.calculated_max; 2674 dev_dbg(di->dev, 2675 "VBUS input current limited to %d mA\n", 2676 di->max_usb_in_curr.set_max); 2677 } 2678 2679 if (di->usb.charger_connected) 2680 ab8500_charger_set_vbus_in_curr(di, 2681 di->max_usb_in_curr.usb_type_max); 2682 } 2683 2684 /** 2685 * ab8500_charger_vbusdetf_handler() - VBUS falling detected 2686 * @irq: interrupt number 2687 * @_di: pointer to the ab8500_charger structure 2688 * 2689 * Returns IRQ status(IRQ_HANDLED) 2690 */ 2691 static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di) 2692 { 2693 struct ab8500_charger *di = _di; 2694 2695 di->vbus_detected = false; 2696 dev_dbg(di->dev, "VBUS falling detected\n"); 2697 queue_work(di->charger_wq, &di->detect_usb_type_work); 2698 2699 return IRQ_HANDLED; 2700 } 2701 2702 /** 2703 * ab8500_charger_vbusdetr_handler() - VBUS rising detected 2704 * @irq: interrupt number 2705 * @_di: pointer to the ab8500_charger structure 2706 * 2707 * Returns IRQ status(IRQ_HANDLED) 2708 */ 2709 static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di) 2710 { 2711 struct ab8500_charger *di = _di; 2712 2713 di->vbus_detected = true; 2714 dev_dbg(di->dev, "VBUS rising detected\n"); 2715 2716 queue_work(di->charger_wq, &di->detect_usb_type_work); 2717 2718 return IRQ_HANDLED; 2719 } 2720 2721 /** 2722 * ab8500_charger_usblinkstatus_handler() - USB link status has changed 2723 * @irq: interrupt number 2724 * @_di: pointer to the ab8500_charger structure 2725 * 2726 * Returns IRQ status(IRQ_HANDLED) 2727 */ 2728 static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di) 2729 { 2730 struct ab8500_charger *di = _di; 2731 2732 dev_dbg(di->dev, "USB link status changed\n"); 2733 2734 queue_work(di->charger_wq, &di->usb_link_status_work); 2735 2736 return IRQ_HANDLED; 2737 } 2738 2739 /** 2740 * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger 2741 * thermal protection threshold 2742 * @irq: interrupt number 2743 * @_di: pointer to the ab8500_charger structure 2744 * 2745 * Returns IRQ status(IRQ_HANDLED) 2746 */ 2747 static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di) 2748 { 2749 struct ab8500_charger *di = _di; 2750 2751 dev_dbg(di->dev, 2752 "Die temp above USB charger thermal protection threshold\n"); 2753 queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); 2754 2755 return IRQ_HANDLED; 2756 } 2757 2758 /** 2759 * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger 2760 * thermal protection threshold 2761 * @irq: interrupt number 2762 * @_di: pointer to the ab8500_charger structure 2763 * 2764 * Returns IRQ status(IRQ_HANDLED) 2765 */ 2766 static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di) 2767 { 2768 struct ab8500_charger *di = _di; 2769 2770 dev_dbg(di->dev, 2771 "Die temp ok for USB charger thermal protection threshold\n"); 2772 queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); 2773 2774 return IRQ_HANDLED; 2775 } 2776 2777 /** 2778 * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected 2779 * @irq: interrupt number 2780 * @_di: pointer to the ab8500_charger structure 2781 * 2782 * Returns IRQ status(IRQ_HANDLED) 2783 */ 2784 static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di) 2785 { 2786 struct ab8500_charger *di = _di; 2787 2788 dev_dbg(di->dev, "Not allowed USB charger detected\n"); 2789 queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0); 2790 2791 return IRQ_HANDLED; 2792 } 2793 2794 /** 2795 * ab8500_charger_chwdexp_handler() - Charger watchdog expired 2796 * @irq: interrupt number 2797 * @_di: pointer to the ab8500_charger structure 2798 * 2799 * Returns IRQ status(IRQ_HANDLED) 2800 */ 2801 static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di) 2802 { 2803 struct ab8500_charger *di = _di; 2804 2805 dev_dbg(di->dev, "Charger watchdog expired\n"); 2806 2807 /* 2808 * The charger that was online when the watchdog expired 2809 * needs to be restarted for charging to start again 2810 */ 2811 if (di->ac.charger_online) { 2812 di->ac.wd_expired = true; 2813 ab8500_power_supply_changed(di, di->ac_chg.psy); 2814 } 2815 if (di->usb.charger_online) { 2816 di->usb.wd_expired = true; 2817 ab8500_power_supply_changed(di, di->usb_chg.psy); 2818 } 2819 2820 return IRQ_HANDLED; 2821 } 2822 2823 /** 2824 * ab8500_charger_vbuschdropend_handler() - VBUS drop removed 2825 * @irq: interrupt number 2826 * @_di: pointer to the ab8500_charger structure 2827 * 2828 * Returns IRQ status(IRQ_HANDLED) 2829 */ 2830 static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di) 2831 { 2832 struct ab8500_charger *di = _di; 2833 2834 dev_dbg(di->dev, "VBUS charger drop ended\n"); 2835 di->flags.vbus_drop_end = true; 2836 2837 /* 2838 * VBUS might have dropped due to bad connection. 2839 * Schedule a new input limit set to the value SW requests. 2840 */ 2841 queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 2842 round_jiffies(VBUS_IN_CURR_LIM_RETRY_SET_TIME * HZ)); 2843 2844 return IRQ_HANDLED; 2845 } 2846 2847 /** 2848 * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected 2849 * @irq: interrupt number 2850 * @_di: pointer to the ab8500_charger structure 2851 * 2852 * Returns IRQ status(IRQ_HANDLED) 2853 */ 2854 static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di) 2855 { 2856 struct ab8500_charger *di = _di; 2857 2858 dev_dbg(di->dev, "VBUS overvoltage detected\n"); 2859 di->flags.vbus_ovv = true; 2860 ab8500_power_supply_changed(di, di->usb_chg.psy); 2861 2862 /* Schedule a new HW failure check */ 2863 queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); 2864 2865 return IRQ_HANDLED; 2866 } 2867 2868 /** 2869 * ab8500_charger_ac_get_property() - get the ac/mains properties 2870 * @psy: pointer to the power_supply structure 2871 * @psp: pointer to the power_supply_property structure 2872 * @val: pointer to the power_supply_propval union 2873 * 2874 * This function gets called when an application tries to get the ac/mains 2875 * properties by reading the sysfs files. 2876 * AC/Mains properties are online, present and voltage. 2877 * online: ac/mains charging is in progress or not 2878 * present: presence of the ac/mains 2879 * voltage: AC/Mains voltage 2880 * Returns error code in case of failure else 0(on success) 2881 */ 2882 static int ab8500_charger_ac_get_property(struct power_supply *psy, 2883 enum power_supply_property psp, 2884 union power_supply_propval *val) 2885 { 2886 struct ab8500_charger *di; 2887 int ret; 2888 2889 di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy)); 2890 2891 switch (psp) { 2892 case POWER_SUPPLY_PROP_HEALTH: 2893 if (di->flags.mainextchnotok) 2894 val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; 2895 else if (di->ac.wd_expired || di->usb.wd_expired) 2896 val->intval = POWER_SUPPLY_HEALTH_DEAD; 2897 else if (di->flags.main_thermal_prot) 2898 val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; 2899 else 2900 val->intval = POWER_SUPPLY_HEALTH_GOOD; 2901 break; 2902 case POWER_SUPPLY_PROP_ONLINE: 2903 val->intval = di->ac.charger_online; 2904 break; 2905 case POWER_SUPPLY_PROP_PRESENT: 2906 val->intval = di->ac.charger_connected; 2907 break; 2908 case POWER_SUPPLY_PROP_VOLTAGE_NOW: 2909 ret = ab8500_charger_get_ac_voltage(di); 2910 if (ret >= 0) 2911 di->ac.charger_voltage = ret; 2912 /* On error, use previous value */ 2913 val->intval = di->ac.charger_voltage * 1000; 2914 break; 2915 case POWER_SUPPLY_PROP_VOLTAGE_AVG: 2916 /* 2917 * This property is used to indicate when CV mode is entered 2918 * for the AC charger 2919 */ 2920 di->ac.cv_active = ab8500_charger_ac_cv(di); 2921 val->intval = di->ac.cv_active; 2922 break; 2923 case POWER_SUPPLY_PROP_CURRENT_NOW: 2924 ret = ab8500_charger_get_ac_current(di); 2925 if (ret >= 0) 2926 di->ac.charger_current = ret; 2927 val->intval = di->ac.charger_current * 1000; 2928 break; 2929 default: 2930 return -EINVAL; 2931 } 2932 return 0; 2933 } 2934 2935 /** 2936 * ab8500_charger_usb_get_property() - get the usb properties 2937 * @psy: pointer to the power_supply structure 2938 * @psp: pointer to the power_supply_property structure 2939 * @val: pointer to the power_supply_propval union 2940 * 2941 * This function gets called when an application tries to get the usb 2942 * properties by reading the sysfs files. 2943 * USB properties are online, present and voltage. 2944 * online: usb charging is in progress or not 2945 * present: presence of the usb 2946 * voltage: vbus voltage 2947 * Returns error code in case of failure else 0(on success) 2948 */ 2949 static int ab8500_charger_usb_get_property(struct power_supply *psy, 2950 enum power_supply_property psp, 2951 union power_supply_propval *val) 2952 { 2953 struct ab8500_charger *di; 2954 int ret; 2955 2956 di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy)); 2957 2958 switch (psp) { 2959 case POWER_SUPPLY_PROP_HEALTH: 2960 if (di->flags.usbchargernotok) 2961 val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; 2962 else if (di->ac.wd_expired || di->usb.wd_expired) 2963 val->intval = POWER_SUPPLY_HEALTH_DEAD; 2964 else if (di->flags.usb_thermal_prot) 2965 val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; 2966 else if (di->flags.vbus_ovv) 2967 val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; 2968 else 2969 val->intval = POWER_SUPPLY_HEALTH_GOOD; 2970 break; 2971 case POWER_SUPPLY_PROP_ONLINE: 2972 val->intval = di->usb.charger_online; 2973 break; 2974 case POWER_SUPPLY_PROP_PRESENT: 2975 val->intval = di->usb.charger_connected; 2976 break; 2977 case POWER_SUPPLY_PROP_VOLTAGE_NOW: 2978 ret = ab8500_charger_get_vbus_voltage(di); 2979 if (ret >= 0) 2980 di->usb.charger_voltage = ret; 2981 val->intval = di->usb.charger_voltage * 1000; 2982 break; 2983 case POWER_SUPPLY_PROP_VOLTAGE_AVG: 2984 /* 2985 * This property is used to indicate when CV mode is entered 2986 * for the USB charger 2987 */ 2988 di->usb.cv_active = ab8500_charger_usb_cv(di); 2989 val->intval = di->usb.cv_active; 2990 break; 2991 case POWER_SUPPLY_PROP_CURRENT_NOW: 2992 ret = ab8500_charger_get_usb_current(di); 2993 if (ret >= 0) 2994 di->usb.charger_current = ret; 2995 val->intval = di->usb.charger_current * 1000; 2996 break; 2997 case POWER_SUPPLY_PROP_CURRENT_AVG: 2998 /* 2999 * This property is used to indicate when VBUS has collapsed 3000 * due to too high output current from the USB charger 3001 */ 3002 if (di->flags.vbus_collapse) 3003 val->intval = 1; 3004 else 3005 val->intval = 0; 3006 break; 3007 default: 3008 return -EINVAL; 3009 } 3010 return 0; 3011 } 3012 3013 /** 3014 * ab8500_charger_init_hw_registers() - Set up charger related registers 3015 * @di: pointer to the ab8500_charger structure 3016 * 3017 * Set up charger OVV, watchdog and maximum voltage registers as well as 3018 * charging of the backup battery 3019 */ 3020 static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) 3021 { 3022 int ret = 0; 3023 3024 /* Setup maximum charger current and voltage for ABB cut2.0 */ 3025 if (!is_ab8500_1p1_or_earlier(di->parent)) { 3026 ret = abx500_set_register_interruptible(di->dev, 3027 AB8500_CHARGER, 3028 AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6); 3029 if (ret) { 3030 dev_err(di->dev, 3031 "failed to set CH_VOLT_LVL_MAX_REG\n"); 3032 goto out; 3033 } 3034 3035 ret = abx500_set_register_interruptible(di->dev, 3036 AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG, 3037 CH_OP_CUR_LVL_1P6); 3038 if (ret) { 3039 dev_err(di->dev, 3040 "failed to set CH_OPT_CRNTLVL_MAX_REG\n"); 3041 goto out; 3042 } 3043 } 3044 3045 if (is_ab8505_2p0(di->parent)) 3046 ret = abx500_mask_and_set_register_interruptible(di->dev, 3047 AB8500_CHARGER, 3048 AB8500_USBCH_CTRL2_REG, 3049 VBUS_AUTO_IN_CURR_LIM_ENA, 3050 VBUS_AUTO_IN_CURR_LIM_ENA); 3051 else 3052 /* 3053 * VBUS OVV set to 6.3V and enable automatic current limitation 3054 */ 3055 ret = abx500_set_register_interruptible(di->dev, 3056 AB8500_CHARGER, 3057 AB8500_USBCH_CTRL2_REG, 3058 VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA); 3059 if (ret) { 3060 dev_err(di->dev, 3061 "failed to set automatic current limitation\n"); 3062 goto out; 3063 } 3064 3065 /* Enable main watchdog in OTP */ 3066 ret = abx500_set_register_interruptible(di->dev, 3067 AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD); 3068 if (ret) { 3069 dev_err(di->dev, "failed to enable main WD in OTP\n"); 3070 goto out; 3071 } 3072 3073 /* Enable main watchdog */ 3074 ret = abx500_set_register_interruptible(di->dev, 3075 AB8500_SYS_CTRL2_BLOCK, 3076 AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA); 3077 if (ret) { 3078 dev_err(di->dev, "failed to enable main watchdog\n"); 3079 goto out; 3080 } 3081 3082 /* 3083 * Due to internal synchronisation, Enable and Kick watchdog bits 3084 * cannot be enabled in a single write. 3085 * A minimum delay of 2*32 kHz period (62.5µs) must be inserted 3086 * between writing Enable then Kick bits. 3087 */ 3088 udelay(63); 3089 3090 /* Kick main watchdog */ 3091 ret = abx500_set_register_interruptible(di->dev, 3092 AB8500_SYS_CTRL2_BLOCK, 3093 AB8500_MAIN_WDOG_CTRL_REG, 3094 (MAIN_WDOG_ENA | MAIN_WDOG_KICK)); 3095 if (ret) { 3096 dev_err(di->dev, "failed to kick main watchdog\n"); 3097 goto out; 3098 } 3099 3100 /* Disable main watchdog */ 3101 ret = abx500_set_register_interruptible(di->dev, 3102 AB8500_SYS_CTRL2_BLOCK, 3103 AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS); 3104 if (ret) { 3105 dev_err(di->dev, "failed to disable main watchdog\n"); 3106 goto out; 3107 } 3108 3109 /* Set watchdog timeout */ 3110 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 3111 AB8500_CH_WD_TIMER_REG, WD_TIMER); 3112 if (ret) { 3113 dev_err(di->dev, "failed to set charger watchdog timeout\n"); 3114 goto out; 3115 } 3116 3117 ret = ab8500_charger_led_en(di, false); 3118 if (ret < 0) { 3119 dev_err(di->dev, "failed to disable LED\n"); 3120 goto out; 3121 } 3122 3123 ret = abx500_set_register_interruptible(di->dev, 3124 AB8500_RTC, 3125 AB8500_RTC_BACKUP_CHG_REG, 3126 (di->bm->bkup_bat_v & 0x3) | di->bm->bkup_bat_i); 3127 if (ret) { 3128 dev_err(di->dev, "failed to setup backup battery charging\n"); 3129 goto out; 3130 } 3131 3132 /* Enable backup battery charging */ 3133 ret = abx500_mask_and_set_register_interruptible(di->dev, 3134 AB8500_RTC, AB8500_RTC_CTRL_REG, 3135 RTC_BUP_CH_ENA, RTC_BUP_CH_ENA); 3136 if (ret < 0) { 3137 dev_err(di->dev, "%s mask and set failed\n", __func__); 3138 goto out; 3139 } 3140 3141 out: 3142 return ret; 3143 } 3144 3145 /* 3146 * ab8500 charger driver interrupts and their respective isr 3147 */ 3148 static struct ab8500_charger_interrupts ab8500_charger_irq[] = { 3149 {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler}, 3150 {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler}, 3151 {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler}, 3152 {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler}, 3153 {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler}, 3154 {"VBUS_DET_F", ab8500_charger_vbusdetf_handler}, 3155 {"VBUS_DET_R", ab8500_charger_vbusdetr_handler}, 3156 {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler}, 3157 {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler}, 3158 {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler}, 3159 {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler}, 3160 {"VBUS_OVV", ab8500_charger_vbusovv_handler}, 3161 {"CH_WD_EXP", ab8500_charger_chwdexp_handler}, 3162 {"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler}, 3163 }; 3164 3165 static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, 3166 unsigned long event, void *power) 3167 { 3168 struct ab8500_charger *di = 3169 container_of(nb, struct ab8500_charger, nb); 3170 enum ab8500_usb_state bm_usb_state; 3171 unsigned mA = *((unsigned *)power); 3172 3173 if (!di) 3174 return NOTIFY_DONE; 3175 3176 if (event != USB_EVENT_VBUS) { 3177 dev_dbg(di->dev, "not a standard host, returning\n"); 3178 return NOTIFY_DONE; 3179 } 3180 3181 /* TODO: State is fabricate here. See if charger really needs USB 3182 * state or if mA is enough 3183 */ 3184 if ((di->usb_state.usb_current == 2) && (mA > 2)) 3185 bm_usb_state = AB8500_BM_USB_STATE_RESUME; 3186 else if (mA == 0) 3187 bm_usb_state = AB8500_BM_USB_STATE_RESET_HS; 3188 else if (mA == 2) 3189 bm_usb_state = AB8500_BM_USB_STATE_SUSPEND; 3190 else if (mA >= 8) /* 8, 100, 500 */ 3191 bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED; 3192 else /* Should never occur */ 3193 bm_usb_state = AB8500_BM_USB_STATE_RESET_FS; 3194 3195 dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n", 3196 __func__, bm_usb_state, mA); 3197 3198 spin_lock(&di->usb_state.usb_lock); 3199 di->usb_state.state_tmp = bm_usb_state; 3200 di->usb_state.usb_current_tmp = mA; 3201 spin_unlock(&di->usb_state.usb_lock); 3202 3203 /* 3204 * wait for some time until you get updates from the usb stack 3205 * and negotiations are completed 3206 */ 3207 queue_delayed_work(di->charger_wq, &di->usb_state_changed_work, HZ/2); 3208 3209 return NOTIFY_OK; 3210 } 3211 3212 #if defined(CONFIG_PM) 3213 static int ab8500_charger_resume(struct platform_device *pdev) 3214 { 3215 int ret; 3216 struct ab8500_charger *di = platform_get_drvdata(pdev); 3217 3218 /* 3219 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog 3220 * logic. That means we have to continuously kick the charger 3221 * watchdog even when no charger is connected. This is only 3222 * valid once the AC charger has been enabled. This is 3223 * a bug that is not handled by the algorithm and the 3224 * watchdog have to be kicked by the charger driver 3225 * when the AC charger is disabled 3226 */ 3227 if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) { 3228 ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, 3229 AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); 3230 if (ret) 3231 dev_err(di->dev, "Failed to kick WD!\n"); 3232 3233 /* If not already pending start a new timer */ 3234 queue_delayed_work(di->charger_wq, &di->kick_wd_work, 3235 round_jiffies(WD_KICK_INTERVAL)); 3236 } 3237 3238 /* If we still have a HW failure, schedule a new check */ 3239 if (di->flags.mainextchnotok || di->flags.vbus_ovv) { 3240 queue_delayed_work(di->charger_wq, 3241 &di->check_hw_failure_work, 0); 3242 } 3243 3244 if (di->flags.vbus_drop_end) 3245 queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 0); 3246 3247 return 0; 3248 } 3249 3250 static int ab8500_charger_suspend(struct platform_device *pdev, 3251 pm_message_t state) 3252 { 3253 struct ab8500_charger *di = platform_get_drvdata(pdev); 3254 3255 /* Cancel any pending jobs */ 3256 cancel_delayed_work(&di->check_hw_failure_work); 3257 cancel_delayed_work(&di->vbus_drop_end_work); 3258 3259 flush_delayed_work(&di->attach_work); 3260 flush_delayed_work(&di->usb_charger_attached_work); 3261 flush_delayed_work(&di->ac_charger_attached_work); 3262 flush_delayed_work(&di->check_usbchgnotok_work); 3263 flush_delayed_work(&di->check_vbat_work); 3264 flush_delayed_work(&di->kick_wd_work); 3265 3266 flush_work(&di->usb_link_status_work); 3267 flush_work(&di->ac_work); 3268 flush_work(&di->detect_usb_type_work); 3269 3270 if (atomic_read(&di->current_stepping_sessions)) 3271 return -EAGAIN; 3272 3273 return 0; 3274 } 3275 #else 3276 #define ab8500_charger_suspend NULL 3277 #define ab8500_charger_resume NULL 3278 #endif 3279 3280 static struct notifier_block charger_nb = { 3281 .notifier_call = ab8500_external_charger_prepare, 3282 }; 3283 3284 static int ab8500_charger_remove(struct platform_device *pdev) 3285 { 3286 struct ab8500_charger *di = platform_get_drvdata(pdev); 3287 int i, irq, ret; 3288 3289 /* Disable AC charging */ 3290 ab8500_charger_ac_en(&di->ac_chg, false, 0, 0); 3291 3292 /* Disable USB charging */ 3293 ab8500_charger_usb_en(&di->usb_chg, false, 0, 0); 3294 3295 /* Disable interrupts */ 3296 for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { 3297 irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); 3298 free_irq(irq, di); 3299 } 3300 3301 /* Backup battery voltage and current disable */ 3302 ret = abx500_mask_and_set_register_interruptible(di->dev, 3303 AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0); 3304 if (ret < 0) 3305 dev_err(di->dev, "%s mask and set failed\n", __func__); 3306 3307 usb_unregister_notifier(di->usb_phy, &di->nb); 3308 usb_put_phy(di->usb_phy); 3309 3310 /* Delete the work queue */ 3311 destroy_workqueue(di->charger_wq); 3312 3313 /* Unregister external charger enable notifier */ 3314 if (!di->ac_chg.enabled) 3315 blocking_notifier_chain_unregister( 3316 &charger_notifier_list, &charger_nb); 3317 3318 flush_scheduled_work(); 3319 if (di->usb_chg.enabled) 3320 power_supply_unregister(di->usb_chg.psy); 3321 3322 if (di->ac_chg.enabled && !di->ac_chg.external) 3323 power_supply_unregister(di->ac_chg.psy); 3324 3325 return 0; 3326 } 3327 3328 static char *supply_interface[] = { 3329 "ab8500_chargalg", 3330 "ab8500_fg", 3331 "ab8500_btemp", 3332 }; 3333 3334 static const struct power_supply_desc ab8500_ac_chg_desc = { 3335 .name = "ab8500_ac", 3336 .type = POWER_SUPPLY_TYPE_MAINS, 3337 .properties = ab8500_charger_ac_props, 3338 .num_properties = ARRAY_SIZE(ab8500_charger_ac_props), 3339 .get_property = ab8500_charger_ac_get_property, 3340 }; 3341 3342 static const struct power_supply_desc ab8500_usb_chg_desc = { 3343 .name = "ab8500_usb", 3344 .type = POWER_SUPPLY_TYPE_USB, 3345 .properties = ab8500_charger_usb_props, 3346 .num_properties = ARRAY_SIZE(ab8500_charger_usb_props), 3347 .get_property = ab8500_charger_usb_get_property, 3348 }; 3349 3350 static int ab8500_charger_probe(struct platform_device *pdev) 3351 { 3352 struct device_node *np = pdev->dev.of_node; 3353 struct abx500_bm_data *plat = pdev->dev.platform_data; 3354 struct power_supply_config ac_psy_cfg = {}, usb_psy_cfg = {}; 3355 struct ab8500_charger *di; 3356 int irq, i, charger_status, ret = 0, ch_stat; 3357 3358 di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); 3359 if (!di) { 3360 dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__); 3361 return -ENOMEM; 3362 } 3363 3364 if (!plat) { 3365 dev_err(&pdev->dev, "no battery management data supplied\n"); 3366 return -EINVAL; 3367 } 3368 di->bm = plat; 3369 3370 if (np) { 3371 ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); 3372 if (ret) { 3373 dev_err(&pdev->dev, "failed to get battery information\n"); 3374 return ret; 3375 } 3376 di->autopower_cfg = of_property_read_bool(np, "autopower_cfg"); 3377 } else 3378 di->autopower_cfg = false; 3379 3380 /* get parent data */ 3381 di->dev = &pdev->dev; 3382 di->parent = dev_get_drvdata(pdev->dev.parent); 3383 3384 /* Get ADC channels */ 3385 di->adc_main_charger_v = devm_iio_channel_get(&pdev->dev, 3386 "main_charger_v"); 3387 if (IS_ERR(di->adc_main_charger_v)) { 3388 if (PTR_ERR(di->adc_main_charger_v) == -ENODEV) 3389 return -EPROBE_DEFER; 3390 dev_err(&pdev->dev, "failed to get ADC main charger voltage\n"); 3391 return PTR_ERR(di->adc_main_charger_v); 3392 } 3393 di->adc_main_charger_c = devm_iio_channel_get(&pdev->dev, 3394 "main_charger_c"); 3395 if (IS_ERR(di->adc_main_charger_c)) { 3396 if (PTR_ERR(di->adc_main_charger_c) == -ENODEV) 3397 return -EPROBE_DEFER; 3398 dev_err(&pdev->dev, "failed to get ADC main charger current\n"); 3399 return PTR_ERR(di->adc_main_charger_c); 3400 } 3401 di->adc_vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v"); 3402 if (IS_ERR(di->adc_vbus_v)) { 3403 if (PTR_ERR(di->adc_vbus_v) == -ENODEV) 3404 return -EPROBE_DEFER; 3405 dev_err(&pdev->dev, "failed to get ADC USB charger voltage\n"); 3406 return PTR_ERR(di->adc_vbus_v); 3407 } 3408 di->adc_usb_charger_c = devm_iio_channel_get(&pdev->dev, 3409 "usb_charger_c"); 3410 if (IS_ERR(di->adc_usb_charger_c)) { 3411 if (PTR_ERR(di->adc_usb_charger_c) == -ENODEV) 3412 return -EPROBE_DEFER; 3413 dev_err(&pdev->dev, "failed to get ADC USB charger current\n"); 3414 return PTR_ERR(di->adc_usb_charger_c); 3415 } 3416 3417 /* initialize lock */ 3418 spin_lock_init(&di->usb_state.usb_lock); 3419 mutex_init(&di->usb_ipt_crnt_lock); 3420 3421 di->autopower = false; 3422 di->invalid_charger_detect_state = 0; 3423 3424 /* AC and USB supply config */ 3425 ac_psy_cfg.supplied_to = supply_interface; 3426 ac_psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface); 3427 ac_psy_cfg.drv_data = &di->ac_chg; 3428 usb_psy_cfg.supplied_to = supply_interface; 3429 usb_psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface); 3430 usb_psy_cfg.drv_data = &di->usb_chg; 3431 3432 /* AC supply */ 3433 /* ux500_charger sub-class */ 3434 di->ac_chg.ops.enable = &ab8500_charger_ac_en; 3435 di->ac_chg.ops.check_enable = &ab8500_charger_ac_check_enable; 3436 di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; 3437 di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current; 3438 di->ac_chg.max_out_volt = ab8500_charger_voltage_map[ 3439 ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; 3440 di->ac_chg.max_out_curr = 3441 di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1]; 3442 di->ac_chg.wdt_refresh = CHG_WD_INTERVAL; 3443 di->ac_chg.enabled = di->bm->ac_enabled; 3444 di->ac_chg.external = false; 3445 3446 /*notifier for external charger enabling*/ 3447 if (!di->ac_chg.enabled) 3448 blocking_notifier_chain_register( 3449 &charger_notifier_list, &charger_nb); 3450 3451 /* USB supply */ 3452 /* ux500_charger sub-class */ 3453 di->usb_chg.ops.enable = &ab8500_charger_usb_en; 3454 di->usb_chg.ops.check_enable = &ab8500_charger_usb_check_enable; 3455 di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; 3456 di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current; 3457 di->usb_chg.max_out_volt = ab8500_charger_voltage_map[ 3458 ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; 3459 di->usb_chg.max_out_curr = 3460 di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1]; 3461 di->usb_chg.wdt_refresh = CHG_WD_INTERVAL; 3462 di->usb_chg.enabled = di->bm->usb_enabled; 3463 di->usb_chg.external = false; 3464 di->usb_state.usb_current = -1; 3465 3466 /* Create a work queue for the charger */ 3467 di->charger_wq = alloc_ordered_workqueue("ab8500_charger_wq", 3468 WQ_MEM_RECLAIM); 3469 if (di->charger_wq == NULL) { 3470 dev_err(di->dev, "failed to create work queue\n"); 3471 return -ENOMEM; 3472 } 3473 3474 mutex_init(&di->charger_attached_mutex); 3475 3476 /* Init work for HW failure check */ 3477 INIT_DEFERRABLE_WORK(&di->check_hw_failure_work, 3478 ab8500_charger_check_hw_failure_work); 3479 INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work, 3480 ab8500_charger_check_usbchargernotok_work); 3481 3482 INIT_DELAYED_WORK(&di->ac_charger_attached_work, 3483 ab8500_charger_ac_attached_work); 3484 INIT_DELAYED_WORK(&di->usb_charger_attached_work, 3485 ab8500_charger_usb_attached_work); 3486 3487 /* 3488 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog 3489 * logic. That means we have to continuously kick the charger 3490 * watchdog even when no charger is connected. This is only 3491 * valid once the AC charger has been enabled. This is 3492 * a bug that is not handled by the algorithm and the 3493 * watchdog have to be kicked by the charger driver 3494 * when the AC charger is disabled 3495 */ 3496 INIT_DEFERRABLE_WORK(&di->kick_wd_work, 3497 ab8500_charger_kick_watchdog_work); 3498 3499 INIT_DEFERRABLE_WORK(&di->check_vbat_work, 3500 ab8500_charger_check_vbat_work); 3501 3502 INIT_DELAYED_WORK(&di->attach_work, 3503 ab8500_charger_usb_link_attach_work); 3504 3505 INIT_DELAYED_WORK(&di->usb_state_changed_work, 3506 ab8500_charger_usb_state_changed_work); 3507 3508 INIT_DELAYED_WORK(&di->vbus_drop_end_work, 3509 ab8500_charger_vbus_drop_end_work); 3510 3511 /* Init work for charger detection */ 3512 INIT_WORK(&di->usb_link_status_work, 3513 ab8500_charger_usb_link_status_work); 3514 INIT_WORK(&di->ac_work, ab8500_charger_ac_work); 3515 INIT_WORK(&di->detect_usb_type_work, 3516 ab8500_charger_detect_usb_type_work); 3517 3518 /* Init work for checking HW status */ 3519 INIT_WORK(&di->check_main_thermal_prot_work, 3520 ab8500_charger_check_main_thermal_prot_work); 3521 INIT_WORK(&di->check_usb_thermal_prot_work, 3522 ab8500_charger_check_usb_thermal_prot_work); 3523 3524 /* 3525 * VDD ADC supply needs to be enabled from this driver when there 3526 * is a charger connected to avoid erroneous BTEMP_HIGH/LOW 3527 * interrupts during charging 3528 */ 3529 di->regu = devm_regulator_get(di->dev, "vddadc"); 3530 if (IS_ERR(di->regu)) { 3531 ret = PTR_ERR(di->regu); 3532 dev_err(di->dev, "failed to get vddadc regulator\n"); 3533 goto free_charger_wq; 3534 } 3535 3536 3537 /* Initialize OVV, and other registers */ 3538 ret = ab8500_charger_init_hw_registers(di); 3539 if (ret) { 3540 dev_err(di->dev, "failed to initialize ABB registers\n"); 3541 goto free_charger_wq; 3542 } 3543 3544 /* Register AC charger class */ 3545 if (di->ac_chg.enabled) { 3546 di->ac_chg.psy = power_supply_register(di->dev, 3547 &ab8500_ac_chg_desc, 3548 &ac_psy_cfg); 3549 if (IS_ERR(di->ac_chg.psy)) { 3550 dev_err(di->dev, "failed to register AC charger\n"); 3551 ret = PTR_ERR(di->ac_chg.psy); 3552 goto free_charger_wq; 3553 } 3554 } 3555 3556 /* Register USB charger class */ 3557 if (di->usb_chg.enabled) { 3558 di->usb_chg.psy = power_supply_register(di->dev, 3559 &ab8500_usb_chg_desc, 3560 &usb_psy_cfg); 3561 if (IS_ERR(di->usb_chg.psy)) { 3562 dev_err(di->dev, "failed to register USB charger\n"); 3563 ret = PTR_ERR(di->usb_chg.psy); 3564 goto free_ac; 3565 } 3566 } 3567 3568 di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2); 3569 if (IS_ERR_OR_NULL(di->usb_phy)) { 3570 dev_err(di->dev, "failed to get usb transceiver\n"); 3571 ret = -EINVAL; 3572 goto free_usb; 3573 } 3574 di->nb.notifier_call = ab8500_charger_usb_notifier_call; 3575 ret = usb_register_notifier(di->usb_phy, &di->nb); 3576 if (ret) { 3577 dev_err(di->dev, "failed to register usb notifier\n"); 3578 goto put_usb_phy; 3579 } 3580 3581 /* Identify the connected charger types during startup */ 3582 charger_status = ab8500_charger_detect_chargers(di, true); 3583 if (charger_status & AC_PW_CONN) { 3584 di->ac.charger_connected = 1; 3585 di->ac_conn = true; 3586 ab8500_power_supply_changed(di, di->ac_chg.psy); 3587 sysfs_notify(&di->ac_chg.psy->dev.kobj, NULL, "present"); 3588 } 3589 3590 if (charger_status & USB_PW_CONN) { 3591 di->vbus_detected = true; 3592 di->vbus_detected_start = true; 3593 queue_work(di->charger_wq, 3594 &di->detect_usb_type_work); 3595 } 3596 3597 /* Register interrupts */ 3598 for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { 3599 irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); 3600 if (irq < 0) { 3601 ret = irq; 3602 goto free_irq; 3603 } 3604 3605 ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr, 3606 IRQF_SHARED | IRQF_NO_SUSPEND, 3607 ab8500_charger_irq[i].name, di); 3608 3609 if (ret != 0) { 3610 dev_err(di->dev, "failed to request %s IRQ %d: %d\n" 3611 , ab8500_charger_irq[i].name, irq, ret); 3612 goto free_irq; 3613 } 3614 dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", 3615 ab8500_charger_irq[i].name, irq, ret); 3616 } 3617 3618 platform_set_drvdata(pdev, di); 3619 3620 mutex_lock(&di->charger_attached_mutex); 3621 3622 ch_stat = ab8500_charger_detect_chargers(di, false); 3623 3624 if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) { 3625 if (is_ab8500(di->parent)) 3626 queue_delayed_work(di->charger_wq, 3627 &di->ac_charger_attached_work, 3628 HZ); 3629 } 3630 if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) { 3631 if (is_ab8500(di->parent)) 3632 queue_delayed_work(di->charger_wq, 3633 &di->usb_charger_attached_work, 3634 HZ); 3635 } 3636 3637 mutex_unlock(&di->charger_attached_mutex); 3638 3639 return ret; 3640 3641 free_irq: 3642 usb_unregister_notifier(di->usb_phy, &di->nb); 3643 3644 /* We also have to free all successfully registered irqs */ 3645 for (i = i - 1; i >= 0; i--) { 3646 irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); 3647 free_irq(irq, di); 3648 } 3649 put_usb_phy: 3650 usb_put_phy(di->usb_phy); 3651 free_usb: 3652 if (di->usb_chg.enabled) 3653 power_supply_unregister(di->usb_chg.psy); 3654 free_ac: 3655 if (di->ac_chg.enabled) 3656 power_supply_unregister(di->ac_chg.psy); 3657 free_charger_wq: 3658 destroy_workqueue(di->charger_wq); 3659 return ret; 3660 } 3661 3662 static const struct of_device_id ab8500_charger_match[] = { 3663 { .compatible = "stericsson,ab8500-charger", }, 3664 { }, 3665 }; 3666 3667 static struct platform_driver ab8500_charger_driver = { 3668 .probe = ab8500_charger_probe, 3669 .remove = ab8500_charger_remove, 3670 .suspend = ab8500_charger_suspend, 3671 .resume = ab8500_charger_resume, 3672 .driver = { 3673 .name = "ab8500-charger", 3674 .of_match_table = ab8500_charger_match, 3675 }, 3676 }; 3677 3678 static int __init ab8500_charger_init(void) 3679 { 3680 return platform_driver_register(&ab8500_charger_driver); 3681 } 3682 3683 static void __exit ab8500_charger_exit(void) 3684 { 3685 platform_driver_unregister(&ab8500_charger_driver); 3686 } 3687 3688 subsys_initcall_sync(ab8500_charger_init); 3689 module_exit(ab8500_charger_exit); 3690 3691 MODULE_LICENSE("GPL v2"); 3692 MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy"); 3693 MODULE_ALIAS("platform:ab8500-charger"); 3694 MODULE_DESCRIPTION("AB8500 charger management driver"); 3695