1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) ST-Ericsson SA 2012
4  *
5  * Battery temperature driver for AB8500
6  *
7  * Author:
8  *	Johan Palsson <johan.palsson@stericsson.com>
9  *	Karl Komierowski <karl.komierowski@stericsson.com>
10  *	Arun R Murthy <arun.murthy@stericsson.com>
11  */
12 
13 #include <linux/init.h>
14 #include <linux/module.h>
15 #include <linux/device.h>
16 #include <linux/component.h>
17 #include <linux/interrupt.h>
18 #include <linux/delay.h>
19 #include <linux/slab.h>
20 #include <linux/platform_device.h>
21 #include <linux/power_supply.h>
22 #include <linux/completion.h>
23 #include <linux/workqueue.h>
24 #include <linux/jiffies.h>
25 #include <linux/of.h>
26 #include <linux/mfd/core.h>
27 #include <linux/mfd/abx500.h>
28 #include <linux/mfd/abx500/ab8500.h>
29 #include <linux/thermal.h>
30 #include <linux/iio/consumer.h>
31 #include <linux/fixp-arith.h>
32 
33 #include "ab8500-bm.h"
34 
35 #define BTEMP_THERMAL_LOW_LIMIT		-10
36 #define BTEMP_THERMAL_MED_LIMIT		0
37 #define BTEMP_THERMAL_HIGH_LIMIT_52	52
38 #define BTEMP_THERMAL_HIGH_LIMIT_57	57
39 #define BTEMP_THERMAL_HIGH_LIMIT_62	62
40 
41 #define BTEMP_BATCTRL_CURR_SRC_7UA	7
42 #define BTEMP_BATCTRL_CURR_SRC_20UA	20
43 
44 #define BTEMP_BATCTRL_CURR_SRC_16UA	16
45 #define BTEMP_BATCTRL_CURR_SRC_18UA	18
46 
47 #define BTEMP_BATCTRL_CURR_SRC_60UA	60
48 #define BTEMP_BATCTRL_CURR_SRC_120UA	120
49 
50 /**
51  * struct ab8500_btemp_interrupts - ab8500 interrupts
52  * @name:	name of the interrupt
53  * @isr		function pointer to the isr
54  */
55 struct ab8500_btemp_interrupts {
56 	char *name;
57 	irqreturn_t (*isr)(int irq, void *data);
58 };
59 
60 struct ab8500_btemp_events {
61 	bool batt_rem;
62 	bool btemp_high;
63 	bool btemp_medhigh;
64 	bool btemp_lowmed;
65 	bool btemp_low;
66 	bool ac_conn;
67 	bool usb_conn;
68 };
69 
70 struct ab8500_btemp_ranges {
71 	int btemp_high_limit;
72 	int btemp_med_limit;
73 	int btemp_low_limit;
74 };
75 
76 /**
77  * struct ab8500_btemp - ab8500 BTEMP device information
78  * @dev:		Pointer to the structure device
79  * @node:		List of AB8500 BTEMPs, hence prepared for reentrance
80  * @curr_source:	What current source we use, in uA
81  * @bat_temp:		Dispatched battery temperature in degree Celsius
82  * @prev_bat_temp	Last measured battery temperature in degree Celsius
83  * @parent:		Pointer to the struct ab8500
84  * @tz:			Thermal zone for the battery
85  * @adc_bat_ctrl:	ADC channel for the battery control
86  * @fg:			Pointer to the struct fg
87  * @bm:           	Platform specific battery management information
88  * @btemp_psy:		Structure for BTEMP specific battery properties
89  * @events:		Structure for information about events triggered
90  * @btemp_ranges:	Battery temperature range structure
91  * @btemp_wq:		Work queue for measuring the temperature periodically
92  * @btemp_periodic_work:	Work for measuring the temperature periodically
93  * @initialized:	True if battery id read.
94  */
95 struct ab8500_btemp {
96 	struct device *dev;
97 	struct list_head node;
98 	int curr_source;
99 	int bat_temp;
100 	int prev_bat_temp;
101 	struct ab8500 *parent;
102 	struct thermal_zone_device *tz;
103 	struct iio_channel *bat_ctrl;
104 	struct ab8500_fg *fg;
105 	struct ab8500_bm_data *bm;
106 	struct power_supply *btemp_psy;
107 	struct ab8500_btemp_events events;
108 	struct ab8500_btemp_ranges btemp_ranges;
109 	struct workqueue_struct *btemp_wq;
110 	struct delayed_work btemp_periodic_work;
111 	bool initialized;
112 };
113 
114 /* BTEMP power supply properties */
115 static enum power_supply_property ab8500_btemp_props[] = {
116 	POWER_SUPPLY_PROP_PRESENT,
117 	POWER_SUPPLY_PROP_ONLINE,
118 	POWER_SUPPLY_PROP_TECHNOLOGY,
119 	POWER_SUPPLY_PROP_TEMP,
120 };
121 
122 static LIST_HEAD(ab8500_btemp_list);
123 
124 /**
125  * ab8500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance
126  * @di:		pointer to the ab8500_btemp structure
127  * @v_batctrl:	measured batctrl voltage
128  * @inst_curr:	measured instant current
129  *
130  * This function returns the battery resistance that is
131  * derived from the BATCTRL voltage.
132  * Returns value in Ohms.
133  */
134 static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
135 	int v_batctrl, int inst_curr)
136 {
137 	if (is_ab8500_1p1_or_earlier(di->parent)) {
138 		/*
139 		 * For ABB cut1.0 and 1.1 BAT_CTRL is internally
140 		 * connected to 1.8V through a 450k resistor
141 		 */
142 		return (450000 * (v_batctrl)) / (1800 - v_batctrl);
143 	}
144 
145 	/*
146 	 * BAT_CTRL is internally
147 	 * connected to 1.8V through a 80k resistor
148 	 */
149 	return (80000 * (v_batctrl)) / (1800 - v_batctrl);
150 }
151 
152 /**
153  * ab8500_btemp_read_batctrl_voltage() - measure batctrl voltage
154  * @di:		pointer to the ab8500_btemp structure
155  *
156  * This function returns the voltage on BATCTRL. Returns value in mV.
157  */
158 static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di)
159 {
160 	int vbtemp, ret;
161 	static int prev;
162 
163 	ret = iio_read_channel_processed(di->bat_ctrl, &vbtemp);
164 	if (ret < 0) {
165 		dev_err(di->dev,
166 			"%s ADC conversion failed, using previous value",
167 			__func__);
168 		return prev;
169 	}
170 	prev = vbtemp;
171 	return vbtemp;
172 }
173 
174 /**
175  * ab8500_btemp_get_batctrl_res() - get battery resistance
176  * @di:		pointer to the ab8500_btemp structure
177  *
178  * This function returns the battery pack identification resistance.
179  * Returns value in Ohms.
180  */
181 static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di)
182 {
183 	int ret;
184 	int batctrl = 0;
185 	int res;
186 	int inst_curr;
187 	int i;
188 
189 	if (!di->fg)
190 		di->fg = ab8500_fg_get();
191 	if (!di->fg) {
192 		dev_err(di->dev, "No fg found\n");
193 		return -EINVAL;
194 	}
195 
196 	ret = ab8500_fg_inst_curr_start(di->fg);
197 
198 	if (ret) {
199 		dev_err(di->dev, "Failed to start current measurement\n");
200 		return ret;
201 	}
202 
203 	do {
204 		msleep(20);
205 	} while (!ab8500_fg_inst_curr_started(di->fg));
206 
207 	i = 0;
208 
209 	do {
210 		batctrl += ab8500_btemp_read_batctrl_voltage(di);
211 		i++;
212 		msleep(20);
213 	} while (!ab8500_fg_inst_curr_done(di->fg));
214 	batctrl /= i;
215 
216 	ret = ab8500_fg_inst_curr_finalize(di->fg, &inst_curr);
217 	if (ret) {
218 		dev_err(di->dev, "Failed to finalize current measurement\n");
219 		return ret;
220 	}
221 
222 	res = ab8500_btemp_batctrl_volt_to_res(di, batctrl, inst_curr);
223 
224 	dev_dbg(di->dev, "%s batctrl: %d res: %d inst_curr: %d samples: %d\n",
225 		__func__, batctrl, res, inst_curr, i);
226 
227 	return res;
228 }
229 
230 /**
231  * ab8500_btemp_id() - Identify the connected battery
232  * @di:		pointer to the ab8500_btemp structure
233  *
234  * This function will try to identify the battery by reading the ID
235  * resistor. Some brands use a combined ID resistor with a NTC resistor to
236  * both be able to identify and to read the temperature of it.
237  */
238 static int ab8500_btemp_id(struct ab8500_btemp *di)
239 {
240 	struct power_supply_battery_info *bi = di->bm->bi;
241 	int res;
242 
243 	di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
244 
245 	res =  ab8500_btemp_get_batctrl_res(di);
246 	if (res < 0) {
247 		dev_err(di->dev, "%s get batctrl res failed\n", __func__);
248 		return -ENXIO;
249 	}
250 
251 	if (power_supply_battery_bti_in_range(bi, res)) {
252 		dev_info(di->dev, "Battery detected on BATCTRL (pin C3)"
253 			 " resistance %d Ohm = %d Ohm +/- %d%%\n",
254 			 res, bi->bti_resistance_ohm,
255 			 bi->bti_resistance_tolerance);
256 	} else {
257 		dev_warn(di->dev, "Battery identified as unknown"
258 			 ", resistance %d Ohm\n", res);
259 		return -ENXIO;
260 	}
261 
262 	return 0;
263 }
264 
265 /**
266  * ab8500_btemp_periodic_work() - Measuring the temperature periodically
267  * @work:	pointer to the work_struct structure
268  *
269  * Work function for measuring the temperature periodically
270  */
271 static void ab8500_btemp_periodic_work(struct work_struct *work)
272 {
273 	int interval;
274 	int bat_temp;
275 	struct ab8500_btemp *di = container_of(work,
276 		struct ab8500_btemp, btemp_periodic_work.work);
277 	/* Assume 25 degrees celsius as start temperature */
278 	static int prev = 25;
279 	int ret;
280 
281 	if (!di->initialized) {
282 		/* Identify the battery */
283 		if (ab8500_btemp_id(di) < 0)
284 			dev_warn(di->dev, "failed to identify the battery\n");
285 	}
286 
287 	/* Failover if a reading is erroneous, use last meausurement */
288 	ret = thermal_zone_get_temp(di->tz, &bat_temp);
289 	if (ret) {
290 		dev_err(di->dev, "error reading temperature\n");
291 		bat_temp = prev;
292 	} else {
293 		/* Convert from millicentigrades to centigrades */
294 		bat_temp /= 1000;
295 		prev = bat_temp;
296 	}
297 
298 	/*
299 	 * Filter battery temperature.
300 	 * Allow direct updates on temperature only if two samples result in
301 	 * same temperature. Else only allow 1 degree change from previous
302 	 * reported value in the direction of the new measurement.
303 	 */
304 	if ((bat_temp == di->prev_bat_temp) || !di->initialized) {
305 		if ((di->bat_temp != di->prev_bat_temp) || !di->initialized) {
306 			di->initialized = true;
307 			di->bat_temp = bat_temp;
308 			power_supply_changed(di->btemp_psy);
309 		}
310 	} else if (bat_temp < di->prev_bat_temp) {
311 		di->bat_temp--;
312 		power_supply_changed(di->btemp_psy);
313 	} else if (bat_temp > di->prev_bat_temp) {
314 		di->bat_temp++;
315 		power_supply_changed(di->btemp_psy);
316 	}
317 	di->prev_bat_temp = bat_temp;
318 
319 	if (di->events.ac_conn || di->events.usb_conn)
320 		interval = di->bm->temp_interval_chg;
321 	else
322 		interval = di->bm->temp_interval_nochg;
323 
324 	/* Schedule a new measurement */
325 	queue_delayed_work(di->btemp_wq,
326 		&di->btemp_periodic_work,
327 		round_jiffies(interval * HZ));
328 }
329 
330 /**
331  * ab8500_btemp_batctrlindb_handler() - battery removal detected
332  * @irq:       interrupt number
333  * @_di:       void pointer that has to address of ab8500_btemp
334  *
335  * Returns IRQ status(IRQ_HANDLED)
336  */
337 static irqreturn_t ab8500_btemp_batctrlindb_handler(int irq, void *_di)
338 {
339 	struct ab8500_btemp *di = _di;
340 	dev_err(di->dev, "Battery removal detected!\n");
341 
342 	di->events.batt_rem = true;
343 	power_supply_changed(di->btemp_psy);
344 
345 	return IRQ_HANDLED;
346 }
347 
348 /**
349  * ab8500_btemp_templow_handler() - battery temp lower than 10 degrees
350  * @irq:       interrupt number
351  * @_di:       void pointer that has to address of ab8500_btemp
352  *
353  * Returns IRQ status(IRQ_HANDLED)
354  */
355 static irqreturn_t ab8500_btemp_templow_handler(int irq, void *_di)
356 {
357 	struct ab8500_btemp *di = _di;
358 
359 	if (is_ab8500_3p3_or_earlier(di->parent)) {
360 		dev_dbg(di->dev, "Ignore false btemp low irq"
361 			" for ABB cut 1.0, 1.1, 2.0 and 3.3\n");
362 	} else {
363 		dev_crit(di->dev, "Battery temperature lower than -10deg c\n");
364 
365 		di->events.btemp_low = true;
366 		di->events.btemp_high = false;
367 		di->events.btemp_medhigh = false;
368 		di->events.btemp_lowmed = false;
369 		power_supply_changed(di->btemp_psy);
370 	}
371 
372 	return IRQ_HANDLED;
373 }
374 
375 /**
376  * ab8500_btemp_temphigh_handler() - battery temp higher than max temp
377  * @irq:       interrupt number
378  * @_di:       void pointer that has to address of ab8500_btemp
379  *
380  * Returns IRQ status(IRQ_HANDLED)
381  */
382 static irqreturn_t ab8500_btemp_temphigh_handler(int irq, void *_di)
383 {
384 	struct ab8500_btemp *di = _di;
385 
386 	dev_crit(di->dev, "Battery temperature is higher than MAX temp\n");
387 
388 	di->events.btemp_high = true;
389 	di->events.btemp_medhigh = false;
390 	di->events.btemp_lowmed = false;
391 	di->events.btemp_low = false;
392 	power_supply_changed(di->btemp_psy);
393 
394 	return IRQ_HANDLED;
395 }
396 
397 /**
398  * ab8500_btemp_lowmed_handler() - battery temp between low and medium
399  * @irq:       interrupt number
400  * @_di:       void pointer that has to address of ab8500_btemp
401  *
402  * Returns IRQ status(IRQ_HANDLED)
403  */
404 static irqreturn_t ab8500_btemp_lowmed_handler(int irq, void *_di)
405 {
406 	struct ab8500_btemp *di = _di;
407 
408 	dev_dbg(di->dev, "Battery temperature is between low and medium\n");
409 
410 	di->events.btemp_lowmed = true;
411 	di->events.btemp_medhigh = false;
412 	di->events.btemp_high = false;
413 	di->events.btemp_low = false;
414 	power_supply_changed(di->btemp_psy);
415 
416 	return IRQ_HANDLED;
417 }
418 
419 /**
420  * ab8500_btemp_medhigh_handler() - battery temp between medium and high
421  * @irq:       interrupt number
422  * @_di:       void pointer that has to address of ab8500_btemp
423  *
424  * Returns IRQ status(IRQ_HANDLED)
425  */
426 static irqreturn_t ab8500_btemp_medhigh_handler(int irq, void *_di)
427 {
428 	struct ab8500_btemp *di = _di;
429 
430 	dev_dbg(di->dev, "Battery temperature is between medium and high\n");
431 
432 	di->events.btemp_medhigh = true;
433 	di->events.btemp_lowmed = false;
434 	di->events.btemp_high = false;
435 	di->events.btemp_low = false;
436 	power_supply_changed(di->btemp_psy);
437 
438 	return IRQ_HANDLED;
439 }
440 
441 /**
442  * ab8500_btemp_periodic() - Periodic temperature measurements
443  * @di:		pointer to the ab8500_btemp structure
444  * @enable:	enable or disable periodic temperature measurements
445  *
446  * Starts of stops periodic temperature measurements. Periodic measurements
447  * should only be done when a charger is connected.
448  */
449 static void ab8500_btemp_periodic(struct ab8500_btemp *di,
450 	bool enable)
451 {
452 	dev_dbg(di->dev, "Enable periodic temperature measurements: %d\n",
453 		enable);
454 	/*
455 	 * Make sure a new measurement is done directly by cancelling
456 	 * any pending work
457 	 */
458 	cancel_delayed_work_sync(&di->btemp_periodic_work);
459 
460 	if (enable)
461 		queue_delayed_work(di->btemp_wq, &di->btemp_periodic_work, 0);
462 }
463 
464 /**
465  * ab8500_btemp_get_temp() - get battery temperature
466  * @di:		pointer to the ab8500_btemp structure
467  *
468  * Returns battery temperature
469  */
470 static int ab8500_btemp_get_temp(struct ab8500_btemp *di)
471 {
472 	int temp = 0;
473 
474 	/*
475 	 * The BTEMP events are not reliabe on AB8500 cut3.3
476 	 * and prior versions
477 	 */
478 	if (is_ab8500_3p3_or_earlier(di->parent)) {
479 		temp = di->bat_temp * 10;
480 	} else {
481 		if (di->events.btemp_low) {
482 			if (temp > di->btemp_ranges.btemp_low_limit)
483 				temp = di->btemp_ranges.btemp_low_limit * 10;
484 			else
485 				temp = di->bat_temp * 10;
486 		} else if (di->events.btemp_high) {
487 			if (temp < di->btemp_ranges.btemp_high_limit)
488 				temp = di->btemp_ranges.btemp_high_limit * 10;
489 			else
490 				temp = di->bat_temp * 10;
491 		} else if (di->events.btemp_lowmed) {
492 			if (temp > di->btemp_ranges.btemp_med_limit)
493 				temp = di->btemp_ranges.btemp_med_limit * 10;
494 			else
495 				temp = di->bat_temp * 10;
496 		} else if (di->events.btemp_medhigh) {
497 			if (temp < di->btemp_ranges.btemp_med_limit)
498 				temp = di->btemp_ranges.btemp_med_limit * 10;
499 			else
500 				temp = di->bat_temp * 10;
501 		} else
502 			temp = di->bat_temp * 10;
503 	}
504 	return temp;
505 }
506 
507 /**
508  * ab8500_btemp_get_property() - get the btemp properties
509  * @psy:        pointer to the power_supply structure
510  * @psp:        pointer to the power_supply_property structure
511  * @val:        pointer to the power_supply_propval union
512  *
513  * This function gets called when an application tries to get the btemp
514  * properties by reading the sysfs files.
515  * online:	presence of the battery
516  * present:	presence of the battery
517  * technology:	battery technology
518  * temp:	battery temperature
519  * Returns error code in case of failure else 0(on success)
520  */
521 static int ab8500_btemp_get_property(struct power_supply *psy,
522 	enum power_supply_property psp,
523 	union power_supply_propval *val)
524 {
525 	struct ab8500_btemp *di = power_supply_get_drvdata(psy);
526 
527 	switch (psp) {
528 	case POWER_SUPPLY_PROP_PRESENT:
529 	case POWER_SUPPLY_PROP_ONLINE:
530 		if (di->events.batt_rem)
531 			val->intval = 0;
532 		else
533 			val->intval = 1;
534 		break;
535 	case POWER_SUPPLY_PROP_TECHNOLOGY:
536 		if (di->bm->bi)
537 			val->intval = di->bm->bi->technology;
538 		else
539 			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
540 		break;
541 	case POWER_SUPPLY_PROP_TEMP:
542 		val->intval = ab8500_btemp_get_temp(di);
543 		break;
544 	default:
545 		return -EINVAL;
546 	}
547 	return 0;
548 }
549 
550 static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data)
551 {
552 	struct power_supply *psy;
553 	struct power_supply *ext = dev_get_drvdata(dev);
554 	const char **supplicants = (const char **)ext->supplied_to;
555 	struct ab8500_btemp *di;
556 	union power_supply_propval ret;
557 	int j;
558 
559 	psy = (struct power_supply *)data;
560 	di = power_supply_get_drvdata(psy);
561 
562 	/*
563 	 * For all psy where the name of your driver
564 	 * appears in any supplied_to
565 	 */
566 	j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
567 	if (j < 0)
568 		return 0;
569 
570 	/* Go through all properties for the psy */
571 	for (j = 0; j < ext->desc->num_properties; j++) {
572 		enum power_supply_property prop;
573 		prop = ext->desc->properties[j];
574 
575 		if (power_supply_get_property(ext, prop, &ret))
576 			continue;
577 
578 		switch (prop) {
579 		case POWER_SUPPLY_PROP_PRESENT:
580 			switch (ext->desc->type) {
581 			case POWER_SUPPLY_TYPE_MAINS:
582 				/* AC disconnected */
583 				if (!ret.intval && di->events.ac_conn) {
584 					di->events.ac_conn = false;
585 				}
586 				/* AC connected */
587 				else if (ret.intval && !di->events.ac_conn) {
588 					di->events.ac_conn = true;
589 					if (!di->events.usb_conn)
590 						ab8500_btemp_periodic(di, true);
591 				}
592 				break;
593 			case POWER_SUPPLY_TYPE_USB:
594 				/* USB disconnected */
595 				if (!ret.intval && di->events.usb_conn) {
596 					di->events.usb_conn = false;
597 				}
598 				/* USB connected */
599 				else if (ret.intval && !di->events.usb_conn) {
600 					di->events.usb_conn = true;
601 					if (!di->events.ac_conn)
602 						ab8500_btemp_periodic(di, true);
603 				}
604 				break;
605 			default:
606 				break;
607 			}
608 			break;
609 		default:
610 			break;
611 		}
612 	}
613 	return 0;
614 }
615 
616 /**
617  * ab8500_btemp_external_power_changed() - callback for power supply changes
618  * @psy:       pointer to the structure power_supply
619  *
620  * This function is pointing to the function pointer external_power_changed
621  * of the structure power_supply.
622  * This function gets executed when there is a change in the external power
623  * supply to the btemp.
624  */
625 static void ab8500_btemp_external_power_changed(struct power_supply *psy)
626 {
627 	struct ab8500_btemp *di = power_supply_get_drvdata(psy);
628 
629 	class_for_each_device(power_supply_class, NULL,
630 		di->btemp_psy, ab8500_btemp_get_ext_psy_data);
631 }
632 
633 /* ab8500 btemp driver interrupts and their respective isr */
634 static struct ab8500_btemp_interrupts ab8500_btemp_irq[] = {
635 	{"BAT_CTRL_INDB", ab8500_btemp_batctrlindb_handler},
636 	{"BTEMP_LOW", ab8500_btemp_templow_handler},
637 	{"BTEMP_HIGH", ab8500_btemp_temphigh_handler},
638 	{"BTEMP_LOW_MEDIUM", ab8500_btemp_lowmed_handler},
639 	{"BTEMP_MEDIUM_HIGH", ab8500_btemp_medhigh_handler},
640 };
641 
642 static int __maybe_unused ab8500_btemp_resume(struct device *dev)
643 {
644 	struct ab8500_btemp *di = dev_get_drvdata(dev);
645 
646 	ab8500_btemp_periodic(di, true);
647 
648 	return 0;
649 }
650 
651 static int __maybe_unused ab8500_btemp_suspend(struct device *dev)
652 {
653 	struct ab8500_btemp *di = dev_get_drvdata(dev);
654 
655 	ab8500_btemp_periodic(di, false);
656 
657 	return 0;
658 }
659 
660 static char *supply_interface[] = {
661 	"ab8500_chargalg",
662 	"ab8500_fg",
663 };
664 
665 static const struct power_supply_desc ab8500_btemp_desc = {
666 	.name			= "ab8500_btemp",
667 	.type			= POWER_SUPPLY_TYPE_BATTERY,
668 	.properties		= ab8500_btemp_props,
669 	.num_properties		= ARRAY_SIZE(ab8500_btemp_props),
670 	.get_property		= ab8500_btemp_get_property,
671 	.external_power_changed	= ab8500_btemp_external_power_changed,
672 };
673 
674 static int ab8500_btemp_bind(struct device *dev, struct device *master,
675 			     void *data)
676 {
677 	struct ab8500_btemp *di = dev_get_drvdata(dev);
678 
679 	/* Create a work queue for the btemp */
680 	di->btemp_wq =
681 		alloc_workqueue("ab8500_btemp_wq", WQ_MEM_RECLAIM, 0);
682 	if (di->btemp_wq == NULL) {
683 		dev_err(dev, "failed to create work queue\n");
684 		return -ENOMEM;
685 	}
686 
687 	/* Kick off periodic temperature measurements */
688 	ab8500_btemp_periodic(di, true);
689 
690 	return 0;
691 }
692 
693 static void ab8500_btemp_unbind(struct device *dev, struct device *master,
694 				void *data)
695 {
696 	struct ab8500_btemp *di = dev_get_drvdata(dev);
697 
698 	/* Delete the work queue */
699 	destroy_workqueue(di->btemp_wq);
700 }
701 
702 static const struct component_ops ab8500_btemp_component_ops = {
703 	.bind = ab8500_btemp_bind,
704 	.unbind = ab8500_btemp_unbind,
705 };
706 
707 static int ab8500_btemp_probe(struct platform_device *pdev)
708 {
709 	struct power_supply_config psy_cfg = {};
710 	struct device *dev = &pdev->dev;
711 	struct ab8500_btemp *di;
712 	int irq, i, ret = 0;
713 	u8 val;
714 
715 	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
716 	if (!di)
717 		return -ENOMEM;
718 
719 	di->bm = &ab8500_bm_data;
720 
721 	/* get parent data */
722 	di->dev = dev;
723 	di->parent = dev_get_drvdata(pdev->dev.parent);
724 
725 	/* Get thermal zone and ADC */
726 	di->tz = thermal_zone_get_zone_by_name("battery-thermal");
727 	if (IS_ERR(di->tz)) {
728 		return dev_err_probe(dev, PTR_ERR(di->tz),
729 				     "failed to get battery thermal zone\n");
730 	}
731 	di->bat_ctrl = devm_iio_channel_get(dev, "bat_ctrl");
732 	if (IS_ERR(di->bat_ctrl)) {
733 		ret = dev_err_probe(dev, PTR_ERR(di->bat_ctrl),
734 				    "failed to get BAT CTRL ADC channel\n");
735 		return ret;
736 	}
737 
738 	di->initialized = false;
739 
740 	psy_cfg.supplied_to = supply_interface;
741 	psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
742 	psy_cfg.drv_data = di;
743 
744 	/* Init work for measuring temperature periodically */
745 	INIT_DEFERRABLE_WORK(&di->btemp_periodic_work,
746 		ab8500_btemp_periodic_work);
747 
748 	/* Set BTEMP thermal limits. Low and Med are fixed */
749 	di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT;
750 	di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT;
751 
752 	ret = abx500_get_register_interruptible(dev, AB8500_CHARGER,
753 		AB8500_BTEMP_HIGH_TH, &val);
754 	if (ret < 0) {
755 		dev_err(dev, "%s ab8500 read failed\n", __func__);
756 		return ret;
757 	}
758 	switch (val) {
759 	case BTEMP_HIGH_TH_57_0:
760 	case BTEMP_HIGH_TH_57_1:
761 		di->btemp_ranges.btemp_high_limit =
762 			BTEMP_THERMAL_HIGH_LIMIT_57;
763 		break;
764 	case BTEMP_HIGH_TH_52:
765 		di->btemp_ranges.btemp_high_limit =
766 			BTEMP_THERMAL_HIGH_LIMIT_52;
767 		break;
768 	case BTEMP_HIGH_TH_62:
769 		di->btemp_ranges.btemp_high_limit =
770 			BTEMP_THERMAL_HIGH_LIMIT_62;
771 		break;
772 	}
773 
774 	/* Register BTEMP power supply class */
775 	di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc,
776 						   &psy_cfg);
777 	if (IS_ERR(di->btemp_psy)) {
778 		dev_err(dev, "failed to register BTEMP psy\n");
779 		return PTR_ERR(di->btemp_psy);
780 	}
781 
782 	/* Register interrupts */
783 	for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
784 		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
785 		if (irq < 0)
786 			return irq;
787 
788 		ret = devm_request_threaded_irq(dev, irq, NULL,
789 			ab8500_btemp_irq[i].isr,
790 			IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
791 			ab8500_btemp_irq[i].name, di);
792 
793 		if (ret) {
794 			dev_err(dev, "failed to request %s IRQ %d: %d\n"
795 				, ab8500_btemp_irq[i].name, irq, ret);
796 			return ret;
797 		}
798 		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
799 			ab8500_btemp_irq[i].name, irq, ret);
800 	}
801 
802 	platform_set_drvdata(pdev, di);
803 
804 	list_add_tail(&di->node, &ab8500_btemp_list);
805 
806 	return component_add(dev, &ab8500_btemp_component_ops);
807 }
808 
809 static int ab8500_btemp_remove(struct platform_device *pdev)
810 {
811 	component_del(&pdev->dev, &ab8500_btemp_component_ops);
812 
813 	return 0;
814 }
815 
816 static SIMPLE_DEV_PM_OPS(ab8500_btemp_pm_ops, ab8500_btemp_suspend, ab8500_btemp_resume);
817 
818 static const struct of_device_id ab8500_btemp_match[] = {
819 	{ .compatible = "stericsson,ab8500-btemp", },
820 	{ },
821 };
822 MODULE_DEVICE_TABLE(of, ab8500_btemp_match);
823 
824 struct platform_driver ab8500_btemp_driver = {
825 	.probe = ab8500_btemp_probe,
826 	.remove = ab8500_btemp_remove,
827 	.driver = {
828 		.name = "ab8500-btemp",
829 		.of_match_table = ab8500_btemp_match,
830 		.pm = &ab8500_btemp_pm_ops,
831 	},
832 };
833 MODULE_LICENSE("GPL v2");
834 MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
835 MODULE_ALIAS("platform:ab8500-btemp");
836 MODULE_DESCRIPTION("AB8500 battery temperature driver");
837