1 /* 2 * Atmel AT91 SAM9 & SAMA5 SoCs reset code 3 * 4 * Copyright (C) 2007 Atmel Corporation. 5 * Copyright (C) BitBox Ltd 2010 6 * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com> 7 * Copyright (C) 2014 Free Electrons 8 * 9 * This file is licensed under the terms of the GNU General Public 10 * License version 2. This program is licensed "as is" without any 11 * warranty of any kind, whether express or implied. 12 */ 13 14 #include <linux/clk.h> 15 #include <linux/io.h> 16 #include <linux/module.h> 17 #include <linux/of_address.h> 18 #include <linux/platform_device.h> 19 #include <linux/reboot.h> 20 21 #include <soc/at91/at91sam9_ddrsdr.h> 22 #include <soc/at91/at91sam9_sdramc.h> 23 24 #define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */ 25 #define AT91_RSTC_PROCRST BIT(0) /* Processor Reset */ 26 #define AT91_RSTC_PERRST BIT(2) /* Peripheral Reset */ 27 #define AT91_RSTC_EXTRST BIT(3) /* External Reset */ 28 #define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ 29 30 #define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */ 31 #define AT91_RSTC_URSTS BIT(0) /* User Reset Status */ 32 #define AT91_RSTC_RSTTYP GENMASK(10, 8) /* Reset Type */ 33 #define AT91_RSTC_NRSTL BIT(16) /* NRST Pin Level */ 34 #define AT91_RSTC_SRCMP BIT(17) /* Software Reset Command in Progress */ 35 36 #define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */ 37 #define AT91_RSTC_URSTEN BIT(0) /* User Reset Enable */ 38 #define AT91_RSTC_URSTIEN BIT(4) /* User Reset Interrupt Enable */ 39 #define AT91_RSTC_ERSTL GENMASK(11, 8) /* External Reset Length */ 40 41 enum reset_type { 42 RESET_TYPE_GENERAL = 0, 43 RESET_TYPE_WAKEUP = 1, 44 RESET_TYPE_WATCHDOG = 2, 45 RESET_TYPE_SOFTWARE = 3, 46 RESET_TYPE_USER = 4, 47 RESET_TYPE_CPU_FAIL = 6, 48 RESET_TYPE_XTAL_FAIL = 7, 49 RESET_TYPE_ULP2 = 8, 50 }; 51 52 static void __iomem *at91_ramc_base[2], *at91_rstc_base; 53 static struct clk *sclk; 54 55 /* 56 * unless the SDRAM is cleanly shutdown before we hit the 57 * reset register it can be left driving the data bus and 58 * killing the chance of a subsequent boot from NAND 59 */ 60 static int at91sam9260_restart(struct notifier_block *this, unsigned long mode, 61 void *cmd) 62 { 63 asm volatile( 64 /* Align to cache lines */ 65 ".balign 32\n\t" 66 67 /* Disable SDRAM accesses */ 68 "str %2, [%0, #" __stringify(AT91_SDRAMC_TR) "]\n\t" 69 70 /* Power down SDRAM */ 71 "str %3, [%0, #" __stringify(AT91_SDRAMC_LPR) "]\n\t" 72 73 /* Reset CPU */ 74 "str %4, [%1, #" __stringify(AT91_RSTC_CR) "]\n\t" 75 76 "b .\n\t" 77 : 78 : "r" (at91_ramc_base[0]), 79 "r" (at91_rstc_base), 80 "r" (1), 81 "r" cpu_to_le32(AT91_SDRAMC_LPCB_POWER_DOWN), 82 "r" cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST)); 83 84 return NOTIFY_DONE; 85 } 86 87 static int at91sam9g45_restart(struct notifier_block *this, unsigned long mode, 88 void *cmd) 89 { 90 asm volatile( 91 /* 92 * Test wether we have a second RAM controller to care 93 * about. 94 * 95 * First, test that we can dereference the virtual address. 96 */ 97 "cmp %1, #0\n\t" 98 "beq 1f\n\t" 99 100 /* Then, test that the RAM controller is enabled */ 101 "ldr r0, [%1]\n\t" 102 "cmp r0, #0\n\t" 103 104 /* Align to cache lines */ 105 ".balign 32\n\t" 106 107 /* Disable SDRAM0 accesses */ 108 "1: str %3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t" 109 /* Power down SDRAM0 */ 110 " str %4, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t" 111 /* Disable SDRAM1 accesses */ 112 " strne %3, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t" 113 /* Power down SDRAM1 */ 114 " strne %4, [%1, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t" 115 /* Reset CPU */ 116 " str %5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t" 117 118 " b .\n\t" 119 : 120 : "r" (at91_ramc_base[0]), 121 "r" (at91_ramc_base[1]), 122 "r" (at91_rstc_base), 123 "r" (1), 124 "r" cpu_to_le32(AT91_DDRSDRC_LPCB_POWER_DOWN), 125 "r" cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST) 126 : "r0"); 127 128 return NOTIFY_DONE; 129 } 130 131 static int sama5d3_restart(struct notifier_block *this, unsigned long mode, 132 void *cmd) 133 { 134 writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST), 135 at91_rstc_base); 136 137 return NOTIFY_DONE; 138 } 139 140 static int samx7_restart(struct notifier_block *this, unsigned long mode, 141 void *cmd) 142 { 143 writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PROCRST), 144 at91_rstc_base); 145 146 return NOTIFY_DONE; 147 } 148 149 static void __init at91_reset_status(struct platform_device *pdev) 150 { 151 const char *reason; 152 u32 reg = readl(at91_rstc_base + AT91_RSTC_SR); 153 154 switch ((reg & AT91_RSTC_RSTTYP) >> 8) { 155 case RESET_TYPE_GENERAL: 156 reason = "general reset"; 157 break; 158 case RESET_TYPE_WAKEUP: 159 reason = "wakeup"; 160 break; 161 case RESET_TYPE_WATCHDOG: 162 reason = "watchdog reset"; 163 break; 164 case RESET_TYPE_SOFTWARE: 165 reason = "software reset"; 166 break; 167 case RESET_TYPE_USER: 168 reason = "user reset"; 169 break; 170 case RESET_TYPE_CPU_FAIL: 171 reason = "CPU clock failure detection"; 172 break; 173 case RESET_TYPE_XTAL_FAIL: 174 reason = "32.768 kHz crystal failure detection"; 175 break; 176 case RESET_TYPE_ULP2: 177 reason = "ULP2 reset"; 178 break; 179 default: 180 reason = "unknown reset"; 181 break; 182 } 183 184 dev_info(&pdev->dev, "Starting after %s\n", reason); 185 } 186 187 static const struct of_device_id at91_ramc_of_match[] = { 188 { .compatible = "atmel,at91sam9260-sdramc", }, 189 { .compatible = "atmel,at91sam9g45-ddramc", }, 190 { /* sentinel */ } 191 }; 192 193 static const struct of_device_id at91_reset_of_match[] = { 194 { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart }, 195 { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, 196 { .compatible = "atmel,sama5d3-rstc", .data = sama5d3_restart }, 197 { .compatible = "atmel,samx7-rstc", .data = samx7_restart }, 198 { .compatible = "microchip,sam9x60-rstc", .data = samx7_restart }, 199 { /* sentinel */ } 200 }; 201 MODULE_DEVICE_TABLE(of, at91_reset_of_match); 202 203 static struct notifier_block at91_restart_nb = { 204 .priority = 192, 205 }; 206 207 static int __init at91_reset_probe(struct platform_device *pdev) 208 { 209 const struct of_device_id *match; 210 struct device_node *np; 211 int ret, idx = 0; 212 213 at91_rstc_base = of_iomap(pdev->dev.of_node, 0); 214 if (!at91_rstc_base) { 215 dev_err(&pdev->dev, "Could not map reset controller address\n"); 216 return -ENODEV; 217 } 218 219 if (!of_device_is_compatible(pdev->dev.of_node, "atmel,sama5d3-rstc")) { 220 /* we need to shutdown the ddr controller, so get ramc base */ 221 for_each_matching_node(np, at91_ramc_of_match) { 222 at91_ramc_base[idx] = of_iomap(np, 0); 223 if (!at91_ramc_base[idx]) { 224 dev_err(&pdev->dev, "Could not map ram controller address\n"); 225 of_node_put(np); 226 return -ENODEV; 227 } 228 idx++; 229 } 230 } 231 232 match = of_match_node(at91_reset_of_match, pdev->dev.of_node); 233 at91_restart_nb.notifier_call = match->data; 234 235 sclk = devm_clk_get(&pdev->dev, NULL); 236 if (IS_ERR(sclk)) 237 return PTR_ERR(sclk); 238 239 ret = clk_prepare_enable(sclk); 240 if (ret) { 241 dev_err(&pdev->dev, "Could not enable slow clock\n"); 242 return ret; 243 } 244 245 ret = register_restart_handler(&at91_restart_nb); 246 if (ret) { 247 clk_disable_unprepare(sclk); 248 return ret; 249 } 250 251 at91_reset_status(pdev); 252 253 return 0; 254 } 255 256 static int __exit at91_reset_remove(struct platform_device *pdev) 257 { 258 unregister_restart_handler(&at91_restart_nb); 259 clk_disable_unprepare(sclk); 260 261 return 0; 262 } 263 264 static struct platform_driver at91_reset_driver = { 265 .remove = __exit_p(at91_reset_remove), 266 .driver = { 267 .name = "at91-reset", 268 .of_match_table = at91_reset_of_match, 269 }, 270 }; 271 module_platform_driver_probe(at91_reset_driver, at91_reset_probe); 272 273 MODULE_AUTHOR("Atmel Corporation"); 274 MODULE_DESCRIPTION("Reset driver for Atmel SoCs"); 275 MODULE_LICENSE("GPL v2"); 276