xref: /openbmc/linux/drivers/power/reset/Kconfig (revision 76053854) 
1menuconfig POWER_RESET
2	bool "Board level reset or power off"
3	help
4	  Provides a number of drivers which either reset a complete board
5	  or shut it down, by manipulating the main power supply on the board.
6
7	  Say Y here to enable board reset and power off
8
9if POWER_RESET
10
11config POWER_RESET_AS3722
12	bool "ams AS3722 power-off driver"
13	depends on MFD_AS3722
14	help
15	  This driver supports turning off board via a ams AS3722 power-off.
16
17config POWER_RESET_AT91_POWEROFF
18	tristate "Atmel AT91 poweroff driver"
19	depends on ARCH_AT91
20	default SOC_AT91SAM9 || SOC_SAMA5
21	help
22	  This driver supports poweroff for Atmel AT91SAM9 and SAMA5
23	  SoCs
24
25config POWER_RESET_AT91_RESET
26	tristate "Atmel AT91 reset driver"
27	depends on ARCH_AT91
28	default SOC_AT91SAM9 || SOC_SAMA5
29	help
30	  This driver supports restart for Atmel AT91SAM9 and SAMA5
31	  SoCs
32
33config POWER_RESET_AT91_SAMA5D2_SHDWC
34	tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver"
35	depends on ARCH_AT91
36	default SOC_SAMA5
37	help
38	  This driver supports the alternate shutdown controller for some Atmel
39	  SAMA5 SoCs. It is present for example on SAMA5D2 SoC.
40
41config POWER_RESET_AXXIA
42	bool "LSI Axxia reset driver"
43	depends on ARCH_AXXIA
44	help
45	  This driver supports restart for Axxia SoC.
46
47	  Say Y if you have an Axxia family SoC.
48
49config POWER_RESET_BRCMKONA
50	bool "Broadcom Kona reset driver"
51	depends on ARM || COMPILE_TEST
52	default ARCH_BCM_MOBILE
53	help
54	  This driver provides restart support for Broadcom Kona chips.
55
56	  Say Y here if you have a Broadcom Kona-based board and you wish
57	  to have restart support.
58
59config POWER_RESET_BRCMSTB
60	bool "Broadcom STB reset driver"
61	depends on ARM || ARM64 || MIPS || COMPILE_TEST
62	depends on MFD_SYSCON
63	default ARCH_BRCMSTB || BMIPS_GENERIC
64	help
65	  This driver provides restart support for Broadcom STB boards.
66
67	  Say Y here if you have a Broadcom STB board and you wish
68	  to have restart support.
69
70config POWER_RESET_GEMINI_POWEROFF
71	bool "Cortina Gemini power-off driver"
72	depends on ARCH_GEMINI || COMPILE_TEST
73	depends on OF && HAS_IOMEM
74	default ARCH_GEMINI
75	help
76	  This driver supports turning off the Cortina Gemini SoC.
77	  Select this if you're building a kernel with Gemini SoC support.
78
79config POWER_RESET_GPIO
80	bool "GPIO power-off driver"
81	depends on OF_GPIO
82	help
83	  This driver supports turning off your board via a GPIO line.
84	  If your board needs a GPIO high/low to power down, say Y and
85	  create a binding in your devicetree.
86
87config POWER_RESET_GPIO_RESTART
88	bool "GPIO restart driver"
89	depends on OF_GPIO
90	help
91	  This driver supports restarting your board via a GPIO line.
92	  If your board needs a GPIO high/low to restart, say Y and
93	  create a binding in your devicetree.
94
95config POWER_RESET_HISI
96	bool "Hisilicon power-off driver"
97	depends on ARCH_HISI
98	help
99	  Reboot support for Hisilicon boards.
100
101config POWER_RESET_MSM
102	bool "Qualcomm MSM power-off driver"
103	depends on ARCH_QCOM
104	help
105	  Power off and restart support for Qualcomm boards.
106
107config POWER_RESET_OCELOT_RESET
108	bool "Microsemi Ocelot reset driver"
109	depends on MSCC_OCELOT || COMPILE_TEST
110	select MFD_SYSCON
111	help
112	  This driver supports restart for Microsemi Ocelot SoC.
113
114config POWER_RESET_PIIX4_POWEROFF
115	tristate "Intel PIIX4 power-off driver"
116	depends on PCI
117	depends on MIPS || COMPILE_TEST
118	help
119	  This driver supports powering off a system using the Intel PIIX4
120	  southbridge, for example the MIPS Malta development board. The
121	  southbridge SOff state is entered in response to a request to
122	  power off the system.
123
124config POWER_RESET_LTC2952
125	bool "LTC2952 PowerPath power-off driver"
126	depends on OF_GPIO
127	help
128	  This driver supports an external powerdown trigger and board power
129	  down via the LTC2952. Bindings are made in the device tree.
130
131config POWER_RESET_QNAP
132	bool "QNAP power-off driver"
133	depends on OF_GPIO && PLAT_ORION
134	help
135	  This driver supports turning off QNAP NAS devices by sending
136	  commands to the microcontroller which controls the main power.
137
138	  Say Y if you have a QNAP NAS.
139
140config POWER_RESET_RESTART
141	bool "Restart power-off driver"
142	help
143	  Some boards don't actually have the ability to power off.
144	  Instead they restart, and u-boot holds the SoC until the
145	  user presses a key. u-boot then boots into Linux.
146
147config POWER_RESET_ST
148	bool "ST restart driver"
149	depends on ARCH_STI
150	help
151	  Reset support for STMicroelectronics boards.
152
153config POWER_RESET_VERSATILE
154	bool "ARM Versatile family reboot driver"
155	depends on ARM
156	depends on MFD_SYSCON
157	depends on OF
158	help
159	  Power off and restart support for ARM Versatile family of
160	  reference boards.
161
162config POWER_RESET_VEXPRESS
163	bool "ARM Versatile Express power-off and reset driver"
164	depends on ARM || ARM64
165	depends on VEXPRESS_CONFIG
166	help
167	  Power off and reset support for the ARM Ltd. Versatile
168	  Express boards.
169
170config POWER_RESET_XGENE
171	bool "APM SoC X-Gene reset driver"
172	depends on ARM64
173	help
174	  Reboot support for the APM SoC X-Gene Eval boards.
175
176config POWER_RESET_KEYSTONE
177	bool "Keystone reset driver"
178	depends on ARCH_KEYSTONE || COMPILE_TEST
179	depends on HAS_IOMEM
180	select MFD_SYSCON
181	help
182	  Reboot support for the KEYSTONE SoCs.
183
184config POWER_RESET_SYSCON
185	bool "Generic SYSCON regmap reset driver"
186	depends on OF
187	depends on HAS_IOMEM
188	select MFD_SYSCON
189	help
190	  Reboot support for generic SYSCON mapped register reset.
191
192config POWER_RESET_SYSCON_POWEROFF
193	bool "Generic SYSCON regmap poweroff driver"
194	depends on OF
195	depends on HAS_IOMEM
196	select MFD_SYSCON
197	help
198	  Poweroff support for generic SYSCON mapped register poweroff.
199
200config POWER_RESET_RMOBILE
201	tristate "Renesas R-Mobile reset driver"
202	depends on ARCH_RMOBILE || COMPILE_TEST
203	depends on HAS_IOMEM
204	help
205	  Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
206
207config POWER_RESET_ZX
208	tristate "ZTE SoCs reset driver"
209	depends on ARCH_ZX || COMPILE_TEST
210	depends on HAS_IOMEM
211	help
212	  Reboot support for ZTE SoCs.
213
214config REBOOT_MODE
215	tristate
216
217config SYSCON_REBOOT_MODE
218	tristate "Generic SYSCON regmap reboot mode driver"
219	depends on OF
220	depends on MFD_SYSCON
221	select REBOOT_MODE
222	help
223	  Say y here will enable reboot mode driver. This will
224	  get reboot mode arguments and store it in SYSCON mapped
225	  register, then the bootloader can read it to take different
226	  action according to the mode.
227
228config POWER_RESET_SC27XX
229	bool "Spreadtrum SC27xx PMIC power-off driver"
230	depends on MFD_SC27XX_PMIC || COMPILE_TEST
231	help
232	  This driver supports powering off a system through
233	  Spreadtrum SC27xx series PMICs. The SC27xx series
234	  PMICs includes the SC2720, SC2721, SC2723, SC2730
235	  and SC2731 chips.
236
237endif
238
239