xref: /openbmc/linux/drivers/power/Kconfig (revision d894fc60)
1menuconfig POWER_SUPPLY
2	bool "Power supply class support"
3	help
4	  Say Y here to enable power supply class support. This allows
5	  power supply (batteries, AC, USB) monitoring by userspace
6	  via sysfs and uevent (if available) and/or APM kernel interface
7	  (if selected below).
8
9if POWER_SUPPLY
10
11config POWER_SUPPLY_DEBUG
12	bool "Power supply debug"
13	help
14	  Say Y here to enable debugging messages for power supply class
15	  and drivers.
16
17config PDA_POWER
18	tristate "Generic PDA/phone power driver"
19	depends on !S390
20	help
21	  Say Y here to enable generic power driver for PDAs and phones with
22	  one or two external power supplies (AC/USB) connected to main and
23	  backup batteries, and optional builtin charger.
24
25config APM_POWER
26	tristate "APM emulation for class batteries"
27	depends on APM_EMULATION
28	help
29	  Say Y here to enable support APM status emulation using
30	  battery class devices.
31
32config GENERIC_ADC_BATTERY
33	tristate "Generic battery support using IIO"
34	depends on IIO
35	help
36	  Say Y here to enable support for the generic battery driver
37	  which uses IIO framework to read adc.
38
39config MAX8925_POWER
40	tristate "MAX8925 battery charger support"
41	depends on MFD_MAX8925
42	help
43	  Say Y here to enable support for the battery charger in the Maxim
44	  MAX8925 PMIC.
45
46config WM831X_BACKUP
47	tristate "WM831X backup battery charger support"
48	depends on MFD_WM831X
49	help
50	  Say Y here to enable support for the backup battery charger
51	  in the Wolfson Microelectronics WM831x PMICs.
52
53config WM831X_POWER
54	tristate "WM831X PMU support"
55	depends on MFD_WM831X
56	help
57	  Say Y here to enable support for the power management unit
58	  provided by Wolfson Microelectronics WM831x PMICs.
59
60config WM8350_POWER
61        tristate "WM8350 PMU support"
62        depends on MFD_WM8350
63        help
64          Say Y here to enable support for the power management unit
65	  provided by the Wolfson Microelectronics WM8350 PMIC.
66
67config TEST_POWER
68	tristate "Test power driver"
69	help
70	  This driver is used for testing. It's safe to say M here.
71
72config BATTERY_88PM860X
73	tristate "Marvell 88PM860x battery driver"
74	depends on MFD_88PM860X
75	help
76	  Say Y here to enable battery monitor for Marvell 88PM860x chip.
77
78config BATTERY_DS2760
79	tristate "DS2760 battery driver (HP iPAQ & others)"
80	depends on W1 && W1_SLAVE_DS2760
81	help
82	  Say Y here to enable support for batteries with ds2760 chip.
83
84config BATTERY_DS2780
85	tristate "DS2780 battery driver"
86	depends on HAS_IOMEM
87	select W1
88	select W1_SLAVE_DS2780
89	help
90	  Say Y here to enable support for batteries with ds2780 chip.
91
92config BATTERY_DS2781
93	tristate "DS2781 battery driver"
94	depends on HAS_IOMEM
95	select W1
96	select W1_SLAVE_DS2781
97	help
98	  If you enable this you will have the DS2781 battery driver support.
99
100	  The battery monitor chip is used in many batteries/devices
101	  as the one who is responsible for charging/discharging/monitoring
102	  Li+ batteries.
103
104	  If you are unsure, say N.
105
106config BATTERY_DS2782
107	tristate "DS2782/DS2786 standalone gas-gauge"
108	depends on I2C
109	help
110	  Say Y here to enable support for the DS2782/DS2786 standalone battery
111	  gas-gauge.
112
113config BATTERY_PMU
114	tristate "Apple PMU battery"
115	depends on PPC32 && ADB_PMU
116	help
117	  Say Y here to expose battery information on Apple machines
118	  through the generic battery class.
119
120config BATTERY_OLPC
121	tristate "One Laptop Per Child battery"
122	depends on X86_32 && OLPC
123	help
124	  Say Y to enable support for the battery on the OLPC laptop.
125
126config BATTERY_TOSA
127	tristate "Sharp SL-6000 (tosa) battery"
128	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
129	help
130	  Say Y to enable support for the battery on the Sharp Zaurus
131	  SL-6000 (tosa) models.
132
133config BATTERY_COLLIE
134	tristate "Sharp SL-5500 (collie) battery"
135	depends on SA1100_COLLIE && MCP_UCB1200
136	help
137	  Say Y to enable support for the battery on the Sharp Zaurus
138	  SL-5500 (collie) models.
139
140config BATTERY_IPAQ_MICRO
141	tristate "iPAQ Atmel Micro ASIC battery driver"
142	depends on MFD_IPAQ_MICRO
143	help
144	  Choose this option if you want to monitor battery status on
145	  Compaq/HP iPAQ h3100 and h3600.
146
147config BATTERY_WM97XX
148	bool "WM97xx generic battery driver"
149	depends on TOUCHSCREEN_WM97XX=y
150	help
151	  Say Y to enable support for battery measured by WM97xx aux port.
152
153config BATTERY_SBS
154        tristate "SBS Compliant gas gauge"
155        depends on I2C
156        help
157	  Say Y to include support for SBS battery driver for SBS-compliant
158	  gas gauges.
159
160config BATTERY_BQ27x00
161	tristate "BQ27x00 battery driver"
162	depends on I2C || I2C=n
163	help
164	  Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.
165
166config BATTERY_BQ27X00_I2C
167	bool "BQ27200/BQ27500 support"
168	depends on BATTERY_BQ27x00
169	depends on I2C
170	default y
171	help
172	  Say Y here to enable support for batteries with BQ27x00 (I2C) chips.
173
174config BATTERY_BQ27X00_PLATFORM
175	bool "BQ27000 support"
176	depends on BATTERY_BQ27x00
177	default y
178	help
179	  Say Y here to enable support for batteries with BQ27000 (HDQ) chips.
180
181config BATTERY_DA9030
182	tristate "DA9030 battery driver"
183	depends on PMIC_DA903X
184	help
185	  Say Y here to enable support for batteries charger integrated into
186	  DA9030 PMIC.
187
188config BATTERY_DA9052
189	tristate "Dialog DA9052 Battery"
190	depends on PMIC_DA9052
191	help
192	  Say Y here to enable support for batteries charger integrated into
193	  DA9052 PMIC.
194
195config BATTERY_MAX17040
196	tristate "Maxim MAX17040 Fuel Gauge"
197	depends on I2C
198	help
199	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
200	  in handheld and portable equipment. The MAX17040 is configured
201	  to operate with a single lithium cell
202
203config BATTERY_MAX17042
204	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
205	depends on I2C
206	select REGMAP_I2C
207	help
208	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
209	  in handheld and portable equipment. The MAX17042 is configured
210	  to operate with a single lithium cell. MAX8997 and MAX8966 are
211	  multi-function devices that include fuel gauages that are compatible
212	  with MAX17042. This driver also supports max17047/50 chips which are
213	  improved version of max17042.
214
215config BATTERY_Z2
216	tristate "Z2 battery driver"
217	depends on I2C && MACH_ZIPIT2
218	help
219	  Say Y to include support for the battery on the Zipit Z2.
220
221config BATTERY_S3C_ADC
222	tristate "Battery driver for Samsung ADC based monitoring"
223	depends on S3C_ADC
224	help
225	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
226
227config BATTERY_TWL4030_MADC
228	tristate "TWL4030 MADC battery driver"
229	depends on TWL4030_MADC
230	help
231	  Say Y here to enable this dumb driver for batteries managed
232	  through the TWL4030 MADC.
233
234config CHARGER_88PM860X
235	tristate "Marvell 88PM860x Charger driver"
236	depends on MFD_88PM860X && BATTERY_88PM860X
237	help
238	  Say Y here to enable charger for Marvell 88PM860x chip.
239
240config CHARGER_PCF50633
241	tristate "NXP PCF50633 MBC"
242	depends on MFD_PCF50633
243	help
244	 Say Y to include support for NXP PCF50633 Main Battery Charger.
245
246config BATTERY_JZ4740
247	tristate "Ingenic JZ4740 battery"
248	depends on MACH_JZ4740
249	depends on MFD_JZ4740_ADC
250	help
251	  Say Y to enable support for the battery on Ingenic JZ4740 based
252	  boards.
253
254	  This driver can be build as a module. If so, the module will be
255	  called jz4740-battery.
256
257config BATTERY_INTEL_MID
258	tristate "Battery driver for Intel MID platforms"
259	depends on INTEL_SCU_IPC && SPI
260	help
261	  Say Y here to enable the battery driver on Intel MID
262	  platforms.
263
264config BATTERY_RX51
265	tristate "Nokia RX-51 (N900) battery driver"
266	depends on TWL4030_MADC
267	help
268	  Say Y here to enable support for battery information on Nokia
269	  RX-51, also known as N900 tablet.
270
271config CHARGER_ISP1704
272	tristate "ISP1704 USB Charger Detection"
273	depends on USB_PHY
274	help
275	  Say Y to enable support for USB Charger Detection with
276	  ISP1707/ISP1704 USB transceivers.
277
278config CHARGER_MAX8903
279	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
280	help
281	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
282	  The driver supports controlling charger-enable and current-limit
283	  pins based on the status of charger connections with interrupt
284	  handlers.
285
286config CHARGER_TWL4030
287	tristate "OMAP TWL4030 BCI charger driver"
288	depends on TWL4030_CORE
289	help
290	  Say Y here to enable support for TWL4030 Battery Charge Interface.
291
292config CHARGER_LP8727
293	tristate "TI/National Semiconductor LP8727 charger driver"
294	depends on I2C
295	help
296	  Say Y here to enable support for LP8727 Charger Driver.
297
298config CHARGER_LP8788
299	tristate "TI LP8788 charger driver"
300	depends on MFD_LP8788
301	depends on LP8788_ADC
302	depends on IIO
303	help
304	  Say Y to enable support for the LP8788 linear charger.
305
306config CHARGER_GPIO
307	tristate "GPIO charger"
308	depends on GPIOLIB
309	help
310	  Say Y to include support for chargers which report their online status
311	  through a GPIO pin.
312
313	  This driver can be build as a module. If so, the module will be
314	  called gpio-charger.
315
316config CHARGER_MANAGER
317	bool "Battery charger manager for multiple chargers"
318	depends on REGULATOR
319	select EXTCON
320	help
321          Say Y to enable charger-manager support, which allows multiple
322          chargers attached to a battery and multiple batteries attached to a
323          system. The charger-manager also can monitor charging status in
324          runtime and in suspend-to-RAM by waking up the system periodically
325          with help of suspend_again support.
326
327config CHARGER_MAX14577
328	tristate "Maxim MAX14577/77836 battery charger driver"
329	depends on MFD_MAX14577
330	help
331	  Say Y to enable support for the battery charger control sysfs and
332	  platform data of MAX14577/77836 MUICs.
333
334config CHARGER_MAX77693
335	tristate "Maxim MAX77693 battery charger driver"
336	depends on MFD_MAX77693
337	help
338	  Say Y to enable support for the Maxim MAX77693 battery charger.
339
340config CHARGER_MAX8997
341	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
342	depends on MFD_MAX8997 && REGULATOR_MAX8997
343	help
344	  Say Y to enable support for the battery charger control sysfs and
345	  platform data of MAX8997/LP3974 PMICs.
346
347config CHARGER_MAX8998
348	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
349	depends on MFD_MAX8998 && REGULATOR_MAX8998
350	help
351	  Say Y to enable support for the battery charger control sysfs and
352	  platform data of MAX8998/LP3974 PMICs.
353
354config CHARGER_BQ2415X
355	tristate "TI BQ2415x battery charger driver"
356	depends on I2C
357	help
358	  Say Y to enable support for the TI BQ2415x battery charger
359	  PMICs.
360
361	  You'll need this driver to charge batteries on e.g. Nokia
362	  RX-51/N900.
363
364config CHARGER_BQ24190
365	tristate "TI BQ24190 battery charger driver"
366	depends on I2C && GPIOLIB
367	help
368	  Say Y to enable support for the TI BQ24190 battery charger.
369
370config CHARGER_BQ24735
371	tristate "TI BQ24735 battery charger support"
372	depends on I2C && GPIOLIB
373	help
374	  Say Y to enable support for the TI BQ24735 battery charger.
375
376config CHARGER_SMB347
377	tristate "Summit Microelectronics SMB347 Battery Charger"
378	depends on I2C
379	select REGMAP_I2C
380	help
381	  Say Y to include support for Summit Microelectronics SMB347
382	  Battery Charger.
383
384config CHARGER_TPS65090
385	tristate "TPS65090 battery charger driver"
386	depends on MFD_TPS65090
387	help
388	 Say Y here to enable support for battery charging with TPS65090
389	 PMIC chips.
390
391config BATTERY_GAUGE_LTC2941
392	tristate "LTC2941/LTC2943 Battery Gauge Driver"
393	depends on I2C
394	help
395	  Say Y here to include support for LTC2941 and LTC2943 Battery
396	  Gauge IC. The driver reports the charge count continuously, and
397	  measures the voltage and temperature every 10 seconds.
398
399config AB8500_BM
400	bool "AB8500 Battery Management Driver"
401	depends on AB8500_CORE && AB8500_GPADC
402	help
403	  Say Y to include support for AB8500 battery management.
404
405config BATTERY_GOLDFISH
406	tristate "Goldfish battery driver"
407	depends on GOLDFISH || COMPILE_TEST
408	depends on HAS_IOMEM
409	help
410	  Say Y to enable support for the battery and AC power in the
411	  Goldfish emulator.
412
413config BATTERY_RT5033
414	tristate "RT5033 fuel gauge support"
415	depends on MFD_RT5033
416	help
417	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
418	  The fuelgauge calculates and determines the battery state of charge
419	  according to battery open circuit voltage.
420
421source "drivers/power/reset/Kconfig"
422
423endif # POWER_SUPPLY
424
425source "drivers/power/avs/Kconfig"
426