1menuconfig POWER_SUPPLY 2 bool "Power supply class support" 3 help 4 Say Y here to enable power supply class support. This allows 5 power supply (batteries, AC, USB) monitoring by userspace 6 via sysfs and uevent (if available) and/or APM kernel interface 7 (if selected below). 8 9if POWER_SUPPLY 10 11config POWER_SUPPLY_DEBUG 12 bool "Power supply debug" 13 help 14 Say Y here to enable debugging messages for power supply class 15 and drivers. 16 17config PDA_POWER 18 tristate "Generic PDA/phone power driver" 19 depends on !S390 20 help 21 Say Y here to enable generic power driver for PDAs and phones with 22 one or two external power supplies (AC/USB) connected to main and 23 backup batteries, and optional builtin charger. 24 25config APM_POWER 26 tristate "APM emulation for class batteries" 27 depends on APM_EMULATION 28 help 29 Say Y here to enable support APM status emulation using 30 battery class devices. 31 32config GENERIC_ADC_BATTERY 33 tristate "Generic battery support using IIO" 34 depends on IIO 35 help 36 Say Y here to enable support for the generic battery driver 37 which uses IIO framework to read adc. 38 39config MAX8925_POWER 40 tristate "MAX8925 battery charger support" 41 depends on MFD_MAX8925 42 help 43 Say Y here to enable support for the battery charger in the Maxim 44 MAX8925 PMIC. 45 46config WM831X_BACKUP 47 tristate "WM831X backup battery charger support" 48 depends on MFD_WM831X 49 help 50 Say Y here to enable support for the backup battery charger 51 in the Wolfson Microelectronics WM831x PMICs. 52 53config WM831X_POWER 54 tristate "WM831X PMU support" 55 depends on MFD_WM831X 56 help 57 Say Y here to enable support for the power management unit 58 provided by Wolfson Microelectronics WM831x PMICs. 59 60config WM8350_POWER 61 tristate "WM8350 PMU support" 62 depends on MFD_WM8350 63 help 64 Say Y here to enable support for the power management unit 65 provided by the Wolfson Microelectronics WM8350 PMIC. 66 67config TEST_POWER 68 tristate "Test power driver" 69 help 70 This driver is used for testing. It's safe to say M here. 71 72config BATTERY_88PM860X 73 tristate "Marvell 88PM860x battery driver" 74 depends on MFD_88PM860X 75 help 76 Say Y here to enable battery monitor for Marvell 88PM860x chip. 77 78config BATTERY_DS2760 79 tristate "DS2760 battery driver (HP iPAQ & others)" 80 depends on W1 && W1_SLAVE_DS2760 81 help 82 Say Y here to enable support for batteries with ds2760 chip. 83 84config BATTERY_DS2780 85 tristate "DS2780 battery driver" 86 depends on HAS_IOMEM 87 select W1 88 select W1_SLAVE_DS2780 89 help 90 Say Y here to enable support for batteries with ds2780 chip. 91 92config BATTERY_DS2781 93 tristate "DS2781 battery driver" 94 depends on HAS_IOMEM 95 select W1 96 select W1_SLAVE_DS2781 97 help 98 If you enable this you will have the DS2781 battery driver support. 99 100 The battery monitor chip is used in many batteries/devices 101 as the one who is responsible for charging/discharging/monitoring 102 Li+ batteries. 103 104 If you are unsure, say N. 105 106config BATTERY_DS2782 107 tristate "DS2782/DS2786 standalone gas-gauge" 108 depends on I2C 109 help 110 Say Y here to enable support for the DS2782/DS2786 standalone battery 111 gas-gauge. 112 113config BATTERY_PMU 114 tristate "Apple PMU battery" 115 depends on PPC32 && ADB_PMU 116 help 117 Say Y here to expose battery information on Apple machines 118 through the generic battery class. 119 120config BATTERY_OLPC 121 tristate "One Laptop Per Child battery" 122 depends on X86_32 && OLPC 123 help 124 Say Y to enable support for the battery on the OLPC laptop. 125 126config BATTERY_TOSA 127 tristate "Sharp SL-6000 (tosa) battery" 128 depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX 129 help 130 Say Y to enable support for the battery on the Sharp Zaurus 131 SL-6000 (tosa) models. 132 133config BATTERY_COLLIE 134 tristate "Sharp SL-5500 (collie) battery" 135 depends on SA1100_COLLIE && MCP_UCB1200 136 help 137 Say Y to enable support for the battery on the Sharp Zaurus 138 SL-5500 (collie) models. 139 140config BATTERY_IPAQ_MICRO 141 tristate "iPAQ Atmel Micro ASIC battery driver" 142 depends on MFD_IPAQ_MICRO 143 help 144 Choose this option if you want to monitor battery status on 145 Compaq/HP iPAQ h3100 and h3600. 146 147config BATTERY_WM97XX 148 bool "WM97xx generic battery driver" 149 depends on TOUCHSCREEN_WM97XX=y 150 help 151 Say Y to enable support for battery measured by WM97xx aux port. 152 153config BATTERY_SBS 154 tristate "SBS Compliant gas gauge" 155 depends on I2C 156 help 157 Say Y to include support for SBS battery driver for SBS-compliant 158 gas gauges. 159 160config BATTERY_BQ27XXX 161 tristate "BQ27xxx battery driver" 162 help 163 Say Y here to enable support for batteries with BQ27xxx chips. 164 165config BATTERY_BQ27XXX_I2C 166 tristate "BQ27xxx I2C support" 167 depends on BATTERY_BQ27XXX 168 depends on I2C 169 default y 170 help 171 Say Y here to enable support for batteries with BQ27xxx chips 172 connected over an I2C bus. 173 174config BATTERY_DA9030 175 tristate "DA9030 battery driver" 176 depends on PMIC_DA903X 177 help 178 Say Y here to enable support for batteries charger integrated into 179 DA9030 PMIC. 180 181config BATTERY_DA9052 182 tristate "Dialog DA9052 Battery" 183 depends on PMIC_DA9052 184 help 185 Say Y here to enable support for batteries charger integrated into 186 DA9052 PMIC. 187 188config CHARGER_DA9150 189 tristate "Dialog Semiconductor DA9150 Charger support" 190 depends on MFD_DA9150 191 depends on DA9150_GPADC 192 depends on IIO 193 help 194 Say Y here to enable support for charger unit of the DA9150 195 Integrated Charger & Fuel-Gauge IC. 196 197 This driver can also be built as a module. If so, the module will be 198 called da9150-charger. 199 200config BATTERY_DA9150 201 tristate "Dialog Semiconductor DA9150 Fuel Gauge support" 202 depends on MFD_DA9150 203 help 204 Say Y here to enable support for the Fuel-Gauge unit of the DA9150 205 Integrated Charger & Fuel-Gauge IC 206 207 This driver can also be built as a module. If so, the module will be 208 called da9150-fg. 209 210config AXP288_CHARGER 211 tristate "X-Powers AXP288 Charger" 212 depends on MFD_AXP20X && EXTCON_AXP288 213 help 214 Say yes here to have support X-Power AXP288 power management IC (PMIC) 215 integrated charger. 216 217config AXP288_FUEL_GAUGE 218 tristate "X-Powers AXP288 Fuel Gauge" 219 depends on MFD_AXP20X && IIO 220 help 221 Say yes here to have support for X-Power power management IC (PMIC) 222 Fuel Gauge. The device provides battery statistics and status 223 monitoring as well as alerts for battery over/under voltage and 224 over/under temperature. 225 226config BATTERY_MAX17040 227 tristate "Maxim MAX17040 Fuel Gauge" 228 depends on I2C 229 help 230 MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries 231 in handheld and portable equipment. The MAX17040 is configured 232 to operate with a single lithium cell 233 234config BATTERY_MAX17042 235 tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge" 236 depends on I2C 237 select REGMAP_I2C 238 help 239 MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries 240 in handheld and portable equipment. The MAX17042 is configured 241 to operate with a single lithium cell. MAX8997 and MAX8966 are 242 multi-function devices that include fuel gauages that are compatible 243 with MAX17042. This driver also supports max17047/50 chips which are 244 improved version of max17042. 245 246config BATTERY_Z2 247 tristate "Z2 battery driver" 248 depends on I2C && MACH_ZIPIT2 249 help 250 Say Y to include support for the battery on the Zipit Z2. 251 252config BATTERY_S3C_ADC 253 tristate "Battery driver for Samsung ADC based monitoring" 254 depends on S3C_ADC 255 help 256 Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery 257 258config BATTERY_TWL4030_MADC 259 tristate "TWL4030 MADC battery driver" 260 depends on TWL4030_MADC 261 help 262 Say Y here to enable this dumb driver for batteries managed 263 through the TWL4030 MADC. 264 265config CHARGER_88PM860X 266 tristate "Marvell 88PM860x Charger driver" 267 depends on MFD_88PM860X && BATTERY_88PM860X 268 help 269 Say Y here to enable charger for Marvell 88PM860x chip. 270 271config CHARGER_PCF50633 272 tristate "NXP PCF50633 MBC" 273 depends on MFD_PCF50633 274 help 275 Say Y to include support for NXP PCF50633 Main Battery Charger. 276 277config BATTERY_JZ4740 278 tristate "Ingenic JZ4740 battery" 279 depends on MACH_JZ4740 280 depends on MFD_JZ4740_ADC 281 help 282 Say Y to enable support for the battery on Ingenic JZ4740 based 283 boards. 284 285 This driver can be build as a module. If so, the module will be 286 called jz4740-battery. 287 288config BATTERY_INTEL_MID 289 tristate "Battery driver for Intel MID platforms" 290 depends on INTEL_SCU_IPC && SPI 291 help 292 Say Y here to enable the battery driver on Intel MID 293 platforms. 294 295config BATTERY_RX51 296 tristate "Nokia RX-51 (N900) battery driver" 297 depends on TWL4030_MADC 298 help 299 Say Y here to enable support for battery information on Nokia 300 RX-51, also known as N900 tablet. 301 302config CHARGER_ISP1704 303 tristate "ISP1704 USB Charger Detection" 304 depends on USB_PHY 305 help 306 Say Y to enable support for USB Charger Detection with 307 ISP1707/ISP1704 USB transceivers. 308 309config CHARGER_MAX8903 310 tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power" 311 help 312 Say Y to enable support for the MAX8903 DC-DC charger and sysfs. 313 The driver supports controlling charger-enable and current-limit 314 pins based on the status of charger connections with interrupt 315 handlers. 316 317config CHARGER_TWL4030 318 tristate "OMAP TWL4030 BCI charger driver" 319 depends on IIO && TWL4030_CORE 320 help 321 Say Y here to enable support for TWL4030 Battery Charge Interface. 322 323config CHARGER_LP8727 324 tristate "TI/National Semiconductor LP8727 charger driver" 325 depends on I2C 326 help 327 Say Y here to enable support for LP8727 Charger Driver. 328 329config CHARGER_LP8788 330 tristate "TI LP8788 charger driver" 331 depends on MFD_LP8788 332 depends on LP8788_ADC 333 depends on IIO 334 help 335 Say Y to enable support for the LP8788 linear charger. 336 337config CHARGER_GPIO 338 tristate "GPIO charger" 339 depends on GPIOLIB || COMPILE_TEST 340 help 341 Say Y to include support for chargers which report their online status 342 through a GPIO pin. 343 344 This driver can be build as a module. If so, the module will be 345 called gpio-charger. 346 347config CHARGER_MANAGER 348 bool "Battery charger manager for multiple chargers" 349 depends on REGULATOR 350 select EXTCON 351 help 352 Say Y to enable charger-manager support, which allows multiple 353 chargers attached to a battery and multiple batteries attached to a 354 system. The charger-manager also can monitor charging status in 355 runtime and in suspend-to-RAM by waking up the system periodically 356 with help of suspend_again support. 357 358config CHARGER_MAX14577 359 tristate "Maxim MAX14577/77836 battery charger driver" 360 depends on MFD_MAX14577 361 help 362 Say Y to enable support for the battery charger control sysfs and 363 platform data of MAX14577/77836 MUICs. 364 365config CHARGER_MAX77693 366 tristate "Maxim MAX77693 battery charger driver" 367 depends on MFD_MAX77693 368 help 369 Say Y to enable support for the Maxim MAX77693 battery charger. 370 371config CHARGER_MAX8997 372 tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver" 373 depends on MFD_MAX8997 && REGULATOR_MAX8997 374 help 375 Say Y to enable support for the battery charger control sysfs and 376 platform data of MAX8997/LP3974 PMICs. 377 378config CHARGER_MAX8998 379 tristate "Maxim MAX8998/LP3974 PMIC battery charger driver" 380 depends on MFD_MAX8998 && REGULATOR_MAX8998 381 help 382 Say Y to enable support for the battery charger control sysfs and 383 platform data of MAX8998/LP3974 PMICs. 384 385config CHARGER_QCOM_SMBB 386 tristate "Qualcomm Switch-Mode Battery Charger and Boost" 387 depends on MFD_SPMI_PMIC || COMPILE_TEST 388 depends on OF 389 help 390 Say Y to include support for the Switch-Mode Battery Charger and 391 Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger 392 is an integrated, single-cell lithium-ion battery charger. DT 393 configuration is required for loading, see the devicetree 394 documentation for more detail. The base name for this driver is 395 'pm8941_charger'. 396 397config CHARGER_BQ2415X 398 tristate "TI BQ2415x battery charger driver" 399 depends on I2C 400 help 401 Say Y to enable support for the TI BQ2415x battery charger 402 PMICs. 403 404 You'll need this driver to charge batteries on e.g. Nokia 405 RX-51/N900. 406 407config CHARGER_BQ24190 408 tristate "TI BQ24190 battery charger driver" 409 depends on I2C 410 depends on GPIOLIB || COMPILE_TEST 411 help 412 Say Y to enable support for the TI BQ24190 battery charger. 413 414config CHARGER_BQ24257 415 tristate "TI BQ24250/24251/24257 battery charger driver" 416 depends on I2C 417 depends on GPIOLIB || COMPILE_TEST 418 depends on REGMAP_I2C 419 help 420 Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery 421 chargers. 422 423config CHARGER_BQ24735 424 tristate "TI BQ24735 battery charger support" 425 depends on I2C 426 depends on GPIOLIB || COMPILE_TEST 427 help 428 Say Y to enable support for the TI BQ24735 battery charger. 429 430config CHARGER_BQ25890 431 tristate "TI BQ25890 battery charger driver" 432 depends on I2C 433 depends on GPIOLIB || COMPILE_TEST 434 select REGMAP_I2C 435 help 436 Say Y to enable support for the TI BQ25890 battery charger. 437 438config CHARGER_SMB347 439 tristate "Summit Microelectronics SMB347 Battery Charger" 440 depends on I2C 441 select REGMAP_I2C 442 help 443 Say Y to include support for Summit Microelectronics SMB347 444 Battery Charger. 445 446config CHARGER_TPS65090 447 tristate "TPS65090 battery charger driver" 448 depends on MFD_TPS65090 449 help 450 Say Y here to enable support for battery charging with TPS65090 451 PMIC chips. 452 453config CHARGER_TPS65217 454 tristate "TPS65217 battery charger driver" 455 depends on MFD_TPS65217 456 help 457 Say Y here to enable support for battery charging with TPS65217 458 PMIC chips. 459 460config BATTERY_GAUGE_LTC2941 461 tristate "LTC2941/LTC2943 Battery Gauge Driver" 462 depends on I2C 463 help 464 Say Y here to include support for LTC2941 and LTC2943 Battery 465 Gauge IC. The driver reports the charge count continuously, and 466 measures the voltage and temperature every 10 seconds. 467 468config AB8500_BM 469 bool "AB8500 Battery Management Driver" 470 depends on AB8500_CORE && AB8500_GPADC 471 help 472 Say Y to include support for AB8500 battery management. 473 474config BATTERY_GOLDFISH 475 tristate "Goldfish battery driver" 476 depends on GOLDFISH || COMPILE_TEST 477 depends on HAS_IOMEM 478 help 479 Say Y to enable support for the battery and AC power in the 480 Goldfish emulator. 481 482config BATTERY_RT5033 483 tristate "RT5033 fuel gauge support" 484 depends on MFD_RT5033 485 help 486 This adds support for battery fuel gauge in Richtek RT5033 PMIC. 487 The fuelgauge calculates and determines the battery state of charge 488 according to battery open circuit voltage. 489 490config CHARGER_RT9455 491 tristate "Richtek RT9455 battery charger driver" 492 depends on I2C 493 depends on GPIOLIB || COMPILE_TEST 494 select REGMAP_I2C 495 help 496 Say Y to enable support for Richtek RT9455 battery charger. 497 498config AXP20X_POWER 499 tristate "AXP20x power supply driver" 500 depends on MFD_AXP20X 501 help 502 This driver provides support for the power supply features of 503 AXP20x PMIC. 504 505endif # POWER_SUPPLY 506 507source "drivers/power/reset/Kconfig" 508source "drivers/power/avs/Kconfig" 509