1menuconfig POWER_SUPPLY 2 tristate "Power supply class support" 3 help 4 Say Y here to enable power supply class support. This allows 5 power supply (batteries, AC, USB) monitoring by userspace 6 via sysfs and uevent (if available) and/or APM kernel interface 7 (if selected below). 8 9if POWER_SUPPLY 10 11config POWER_SUPPLY_DEBUG 12 bool "Power supply debug" 13 help 14 Say Y here to enable debugging messages for power supply class 15 and drivers. 16 17config PDA_POWER 18 tristate "Generic PDA/phone power driver" 19 depends on !S390 20 help 21 Say Y here to enable generic power driver for PDAs and phones with 22 one or two external power supplies (AC/USB) connected to main and 23 backup batteries, and optional builtin charger. 24 25config APM_POWER 26 tristate "APM emulation for class batteries" 27 depends on APM_EMULATION 28 help 29 Say Y here to enable support APM status emulation using 30 battery class devices. 31 32config MAX8925_POWER 33 tristate "MAX8925 battery charger support" 34 depends on MFD_MAX8925 35 help 36 Say Y here to enable support for the battery charger in the Maxim 37 MAX8925 PMIC. 38 39config WM831X_BACKUP 40 tristate "WM831X backup battery charger support" 41 depends on MFD_WM831X 42 help 43 Say Y here to enable support for the backup battery charger 44 in the Wolfson Microelectronics WM831x PMICs. 45 46config WM831X_POWER 47 tristate "WM831X PMU support" 48 depends on MFD_WM831X 49 help 50 Say Y here to enable support for the power management unit 51 provided by Wolfson Microelectronics WM831x PMICs. 52 53config WM8350_POWER 54 tristate "WM8350 PMU support" 55 depends on MFD_WM8350 56 help 57 Say Y here to enable support for the power management unit 58 provided by the Wolfson Microelectronics WM8350 PMIC. 59 60config TEST_POWER 61 tristate "Test power driver" 62 help 63 This driver is used for testing. It's safe to say M here. 64 65config BATTERY_DS2760 66 tristate "DS2760 battery driver (HP iPAQ & others)" 67 depends on W1 && W1_SLAVE_DS2760 68 help 69 Say Y here to enable support for batteries with ds2760 chip. 70 71config BATTERY_DS2780 72 tristate "DS2780 battery driver" 73 depends on HAS_IOMEM 74 select W1 75 select W1_SLAVE_DS2780 76 help 77 Say Y here to enable support for batteries with ds2780 chip. 78 79config BATTERY_DS2781 80 tristate "2781 battery driver" 81 depends on HAS_IOMEM 82 select W1 83 select W1_SLAVE_DS2781 84 help 85 If you enable this you will have the DS2781 battery driver support. 86 87 The battery monitor chip is used in many batteries/devices 88 as the one who is responsible for charging/discharging/monitoring 89 Li+ batteries. 90 91 If you are unsure, say N. 92 93config BATTERY_DS2782 94 tristate "DS2782/DS2786 standalone gas-gauge" 95 depends on I2C 96 help 97 Say Y here to enable support for the DS2782/DS2786 standalone battery 98 gas-gauge. 99 100config BATTERY_PMU 101 tristate "Apple PMU battery" 102 depends on PPC32 && ADB_PMU 103 help 104 Say Y here to expose battery information on Apple machines 105 through the generic battery class. 106 107config BATTERY_OLPC 108 tristate "One Laptop Per Child battery" 109 depends on X86_32 && OLPC 110 help 111 Say Y to enable support for the battery on the OLPC laptop. 112 113config BATTERY_TOSA 114 tristate "Sharp SL-6000 (tosa) battery" 115 depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX 116 help 117 Say Y to enable support for the battery on the Sharp Zaurus 118 SL-6000 (tosa) models. 119 120config BATTERY_COLLIE 121 tristate "Sharp SL-5500 (collie) battery" 122 depends on SA1100_COLLIE && MCP_UCB1200 123 help 124 Say Y to enable support for the battery on the Sharp Zaurus 125 SL-5500 (collie) models. 126 127config BATTERY_WM97XX 128 bool "WM97xx generic battery driver" 129 depends on TOUCHSCREEN_WM97XX=y 130 help 131 Say Y to enable support for battery measured by WM97xx aux port. 132 133config BATTERY_SBS 134 tristate "SBS Compliant gas gauge" 135 depends on I2C 136 help 137 Say Y to include support for SBS battery driver for SBS-compliant 138 gas gauges. 139 140config BATTERY_BQ27x00 141 tristate "BQ27x00 battery driver" 142 help 143 Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips. 144 145config BATTERY_BQ27X00_I2C 146 bool "BQ27200/BQ27500 support" 147 depends on BATTERY_BQ27x00 148 depends on I2C 149 default y 150 help 151 Say Y here to enable support for batteries with BQ27x00 (I2C) chips. 152 153config BATTERY_BQ27X00_PLATFORM 154 bool "BQ27000 support" 155 depends on BATTERY_BQ27x00 156 default y 157 help 158 Say Y here to enable support for batteries with BQ27000 (HDQ) chips. 159 160config BATTERY_DA9030 161 tristate "DA9030 battery driver" 162 depends on PMIC_DA903X 163 help 164 Say Y here to enable support for batteries charger integrated into 165 DA9030 PMIC. 166 167config BATTERY_DA9052 168 tristate "Dialog DA9052 Battery" 169 depends on PMIC_DA9052 170 depends on BROKEN 171 help 172 Say Y here to enable support for batteries charger integrated into 173 DA9052 PMIC. 174 175config BATTERY_MAX17040 176 tristate "Maxim MAX17040 Fuel Gauge" 177 depends on I2C 178 help 179 MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries 180 in handheld and portable equipment. The MAX17040 is configured 181 to operate with a single lithium cell 182 183config BATTERY_MAX17042 184 tristate "Maxim MAX17042/8997/8966 Fuel Gauge" 185 depends on I2C 186 help 187 MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries 188 in handheld and portable equipment. The MAX17042 is configured 189 to operate with a single lithium cell. MAX8997 and MAX8966 are 190 multi-function devices that include fuel gauages that are compatible 191 with MAX17042. 192 193config BATTERY_Z2 194 tristate "Z2 battery driver" 195 depends on I2C && MACH_ZIPIT2 196 help 197 Say Y to include support for the battery on the Zipit Z2. 198 199config BATTERY_S3C_ADC 200 tristate "Battery driver for Samsung ADC based monitoring" 201 depends on S3C_ADC 202 help 203 Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery 204 205config CHARGER_PCF50633 206 tristate "NXP PCF50633 MBC" 207 depends on MFD_PCF50633 208 help 209 Say Y to include support for NXP PCF50633 Main Battery Charger. 210 211config BATTERY_JZ4740 212 tristate "Ingenic JZ4740 battery" 213 depends on MACH_JZ4740 214 depends on MFD_JZ4740_ADC 215 help 216 Say Y to enable support for the battery on Ingenic JZ4740 based 217 boards. 218 219 This driver can be build as a module. If so, the module will be 220 called jz4740-battery. 221 222config BATTERY_INTEL_MID 223 tristate "Battery driver for Intel MID platforms" 224 depends on INTEL_SCU_IPC && SPI 225 help 226 Say Y here to enable the battery driver on Intel MID 227 platforms. 228 229config CHARGER_ISP1704 230 tristate "ISP1704 USB Charger Detection" 231 depends on USB_OTG_UTILS 232 help 233 Say Y to enable support for USB Charger Detection with 234 ISP1707/ISP1704 USB transceivers. 235 236config CHARGER_MAX8903 237 tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power" 238 depends on GENERIC_HARDIRQS 239 help 240 Say Y to enable support for the MAX8903 DC-DC charger and sysfs. 241 The driver supports controlling charger-enable and current-limit 242 pins based on the status of charger connections with interrupt 243 handlers. 244 245config CHARGER_TWL4030 246 tristate "OMAP TWL4030 BCI charger driver" 247 depends on TWL4030_CORE 248 help 249 Say Y here to enable support for TWL4030 Battery Charge Interface. 250 251config CHARGER_LP8727 252 tristate "TI/National Semiconductor LP8727 charger driver" 253 depends on I2C 254 help 255 Say Y here to enable support for LP8727 Charger Driver. 256 257config CHARGER_GPIO 258 tristate "GPIO charger" 259 depends on GPIOLIB 260 help 261 Say Y to include support for chargers which report their online status 262 through a GPIO pin. 263 264 This driver can be build as a module. If so, the module will be 265 called gpio-charger. 266 267config CHARGER_MANAGER 268 bool "Battery charger manager for multiple chargers" 269 depends on REGULATOR && RTC_CLASS 270 help 271 Say Y to enable charger-manager support, which allows multiple 272 chargers attached to a battery and multiple batteries attached to a 273 system. The charger-manager also can monitor charging status in 274 runtime and in suspend-to-RAM by waking up the system periodically 275 with help of suspend_again support. 276 277config CHARGER_MAX8997 278 tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver" 279 depends on MFD_MAX8997 && REGULATOR_MAX8997 280 help 281 Say Y to enable support for the battery charger control sysfs and 282 platform data of MAX8997/LP3974 PMICs. 283 284config CHARGER_MAX8998 285 tristate "Maxim MAX8998/LP3974 PMIC battery charger driver" 286 depends on MFD_MAX8998 && REGULATOR_MAX8998 287 help 288 Say Y to enable support for the battery charger control sysfs and 289 platform data of MAX8998/LP3974 PMICs. 290 291config CHARGER_SMB347 292 tristate "Summit Microelectronics SMB347 Battery Charger" 293 depends on I2C 294 help 295 Say Y to include support for Summit Microelectronics SMB347 296 Battery Charger. 297 298config AB8500_BM 299 bool "AB8500 Battery Management Driver" 300 depends on AB8500_CORE && AB8500_GPADC 301 help 302 Say Y to include support for AB5500 battery management. 303 304config AB8500_BATTERY_THERM_ON_BATCTRL 305 bool "Thermistor connected on BATCTRL ADC" 306 depends on AB8500_BM 307 help 308 Say Y to enable battery temperature measurements using 309 thermistor connected on BATCTRL ADC. 310endif # POWER_SUPPLY 311