1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Driver for the OLPC XO-1.75 Embedded Controller.
4  *
5  * The EC protocol is documented at:
6  * http://wiki.laptop.org/go/XO_1.75_HOST_to_EC_Protocol
7  *
8  * Copyright (C) 2010 One Laptop per Child Foundation.
9  * Copyright (C) 2018 Lubomir Rintel <lkundrak@v3.sk>
10  */
11 
12 #include <linux/completion.h>
13 #include <linux/ctype.h>
14 #include <linux/delay.h>
15 #include <linux/gpio/consumer.h>
16 #include <linux/input.h>
17 #include <linux/kfifo.h>
18 #include <linux/module.h>
19 #include <linux/olpc-ec.h>
20 #include <linux/platform_device.h>
21 #include <linux/power_supply.h>
22 #include <linux/reboot.h>
23 #include <linux/slab.h>
24 #include <linux/spinlock.h>
25 #include <linux/spi/spi.h>
26 
27 struct ec_cmd_t {
28 	u8 cmd;
29 	u8 bytes_returned;
30 };
31 
32 enum ec_chan_t {
33 	CHAN_NONE = 0,
34 	CHAN_SWITCH,
35 	CHAN_CMD_RESP,
36 	CHAN_KEYBOARD,
37 	CHAN_TOUCHPAD,
38 	CHAN_EVENT,
39 	CHAN_DEBUG,
40 	CHAN_CMD_ERROR,
41 };
42 
43 /*
44  * EC events
45  */
46 #define EVENT_AC_CHANGE			1  /* AC plugged/unplugged */
47 #define EVENT_BATTERY_STATUS		2  /* Battery low/full/error/gone */
48 #define EVENT_BATTERY_CRITICAL		3  /* Battery critical voltage */
49 #define EVENT_BATTERY_SOC_CHANGE	4  /* 1% SOC Change */
50 #define EVENT_BATTERY_ERROR		5  /* Abnormal error, query for cause */
51 #define EVENT_POWER_PRESSED		6  /* Power button was pressed */
52 #define EVENT_POWER_PRESS_WAKE		7  /* Woken up with a power button */
53 #define EVENT_TIMED_HOST_WAKE		8  /* Host wake timer */
54 #define EVENT_OLS_HIGH_LIMIT		9  /* OLS crossed dark threshold */
55 #define EVENT_OLS_LOW_LIMIT		10 /* OLS crossed light threshold */
56 
57 /*
58  * EC commands
59  * (from http://dev.laptop.org/git/users/rsmith/ec-1.75/tree/ec_cmd.h)
60  */
61 #define CMD_GET_API_VERSION		0x08 /* out: u8 */
62 #define CMD_READ_VOLTAGE		0x10 /* out: u16, *9.76/32, mV */
63 #define CMD_READ_CURRENT		0x11 /* out: s16, *15.625/120, mA */
64 #define CMD_READ_ACR			0x12 /* out: s16, *6250/15, uAh */
65 #define CMD_READ_BATT_TEMPERATURE	0x13 /* out: u16, *100/256, deg C */
66 #define CMD_READ_AMBIENT_TEMPERATURE	0x14 /* unimplemented, no hardware */
67 #define CMD_READ_BATTERY_STATUS		0x15 /* out: u8, bitmask */
68 #define CMD_READ_SOC			0x16 /* out: u8, percentage */
69 #define CMD_READ_GAUGE_ID		0x17 /* out: u8 * 8 */
70 #define CMD_READ_GAUGE_DATA		0x18 /* in: u8 addr, out: u8 data */
71 #define CMD_READ_BOARD_ID		0x19 /* out: u16 (platform id) */
72 #define CMD_READ_BATT_ERR_CODE		0x1f /* out: u8, error bitmask */
73 #define CMD_SET_DCON_POWER		0x26 /* in: u8 */
74 #define CMD_RESET_EC			0x28 /* none */
75 #define CMD_READ_BATTERY_TYPE		0x2c /* out: u8 */
76 #define CMD_SET_AUTOWAK			0x33 /* out: u8 */
77 #define CMD_SET_EC_WAKEUP_TIMER		0x36 /* in: u32, out: ? */
78 #define CMD_READ_EXT_SCI_MASK		0x37 /* ? */
79 #define CMD_WRITE_EXT_SCI_MASK		0x38 /* ? */
80 #define CMD_CLEAR_EC_WAKEUP_TIMER	0x39 /* none */
81 #define CMD_ENABLE_RUNIN_DISCHARGE	0x3B /* none */
82 #define CMD_DISABLE_RUNIN_DISCHARGE	0x3C /* none */
83 #define CMD_READ_MPPT_ACTIVE		0x3d /* out: u8 */
84 #define CMD_READ_MPPT_LIMIT		0x3e /* out: u8 */
85 #define CMD_SET_MPPT_LIMIT		0x3f /* in: u8 */
86 #define CMD_DISABLE_MPPT		0x40 /* none */
87 #define CMD_ENABLE_MPPT			0x41 /* none */
88 #define CMD_READ_VIN			0x42 /* out: u16 */
89 #define CMD_EXT_SCI_QUERY		0x43 /* ? */
90 #define RSP_KEYBOARD_DATA		0x48 /* ? */
91 #define RSP_TOUCHPAD_DATA		0x49 /* ? */
92 #define CMD_GET_FW_VERSION		0x4a /* out: u8 * 16 */
93 #define CMD_POWER_CYCLE			0x4b /* none */
94 #define CMD_POWER_OFF			0x4c /* none */
95 #define CMD_RESET_EC_SOFT		0x4d /* none */
96 #define CMD_READ_GAUGE_U16		0x4e /* ? */
97 #define CMD_ENABLE_MOUSE		0x4f /* ? */
98 #define CMD_ECHO			0x52 /* in: u8 * 5, out: u8 * 5 */
99 #define CMD_GET_FW_DATE			0x53 /* out: u8 * 16 */
100 #define CMD_GET_FW_USER			0x54 /* out: u8 * 16 */
101 #define CMD_TURN_OFF_POWER		0x55 /* none (same as 0x4c) */
102 #define CMD_READ_OLS			0x56 /* out: u16 */
103 #define CMD_OLS_SMT_LEDON		0x57 /* none */
104 #define CMD_OLS_SMT_LEDOFF		0x58 /* none */
105 #define CMD_START_OLS_ASSY		0x59 /* none */
106 #define CMD_STOP_OLS_ASSY		0x5a /* none */
107 #define CMD_OLS_SMTTEST_STOP		0x5b /* none */
108 #define CMD_READ_VIN_SCALED		0x5c /* out: u16 */
109 #define CMD_READ_BAT_MIN_W		0x5d /* out: u16 */
110 #define CMD_READ_BAR_MAX_W		0x5e /* out: u16 */
111 #define CMD_RESET_BAT_MINMAX_W		0x5f /* none */
112 #define CMD_READ_LOCATION		0x60 /* in: u16 addr, out: u8 data */
113 #define CMD_WRITE_LOCATION		0x61 /* in: u16 addr, u8 data */
114 #define CMD_KEYBOARD_CMD		0x62 /* in: u8, out: ? */
115 #define CMD_TOUCHPAD_CMD		0x63 /* in: u8, out: ? */
116 #define CMD_GET_FW_HASH			0x64 /* out: u8 * 16 */
117 #define CMD_SUSPEND_HINT		0x65 /* in: u8 */
118 #define CMD_ENABLE_WAKE_TIMER		0x66 /* in: u8 */
119 #define CMD_SET_WAKE_TIMER		0x67 /* in: 32 */
120 #define CMD_ENABLE_WAKE_AUTORESET	0x68 /* in: u8 */
121 #define CMD_OLS_SET_LIMITS		0x69 /* in: u16, u16 */
122 #define CMD_OLS_GET_LIMITS		0x6a /* out: u16, u16 */
123 #define CMD_OLS_SET_CEILING		0x6b /* in: u16 */
124 #define CMD_OLS_GET_CEILING		0x6c /* out: u16 */
125 
126 /*
127  * Accepted EC commands, and how many bytes they return. There are plenty
128  * of EC commands that are no longer implemented, or are implemented only on
129  * certain older boards.
130  */
131 static const struct ec_cmd_t olpc_xo175_ec_cmds[] = {
132 	{ CMD_GET_API_VERSION, 1 },
133 	{ CMD_READ_VOLTAGE, 2 },
134 	{ CMD_READ_CURRENT, 2 },
135 	{ CMD_READ_ACR, 2 },
136 	{ CMD_READ_BATT_TEMPERATURE, 2 },
137 	{ CMD_READ_BATTERY_STATUS, 1 },
138 	{ CMD_READ_SOC, 1 },
139 	{ CMD_READ_GAUGE_ID, 8 },
140 	{ CMD_READ_GAUGE_DATA, 1 },
141 	{ CMD_READ_BOARD_ID, 2 },
142 	{ CMD_READ_BATT_ERR_CODE, 1 },
143 	{ CMD_SET_DCON_POWER, 0 },
144 	{ CMD_RESET_EC, 0 },
145 	{ CMD_READ_BATTERY_TYPE, 1 },
146 	{ CMD_ENABLE_RUNIN_DISCHARGE, 0 },
147 	{ CMD_DISABLE_RUNIN_DISCHARGE, 0 },
148 	{ CMD_READ_MPPT_ACTIVE, 1 },
149 	{ CMD_READ_MPPT_LIMIT, 1 },
150 	{ CMD_SET_MPPT_LIMIT, 0 },
151 	{ CMD_DISABLE_MPPT, 0 },
152 	{ CMD_ENABLE_MPPT, 0 },
153 	{ CMD_READ_VIN, 2 },
154 	{ CMD_GET_FW_VERSION, 16 },
155 	{ CMD_POWER_CYCLE, 0 },
156 	{ CMD_POWER_OFF, 0 },
157 	{ CMD_RESET_EC_SOFT, 0 },
158 	{ CMD_ECHO, 5 },
159 	{ CMD_GET_FW_DATE, 16 },
160 	{ CMD_GET_FW_USER, 16 },
161 	{ CMD_TURN_OFF_POWER, 0 },
162 	{ CMD_READ_OLS, 2 },
163 	{ CMD_OLS_SMT_LEDON, 0 },
164 	{ CMD_OLS_SMT_LEDOFF, 0 },
165 	{ CMD_START_OLS_ASSY, 0 },
166 	{ CMD_STOP_OLS_ASSY, 0 },
167 	{ CMD_OLS_SMTTEST_STOP, 0 },
168 	{ CMD_READ_VIN_SCALED, 2 },
169 	{ CMD_READ_BAT_MIN_W, 2 },
170 	{ CMD_READ_BAR_MAX_W, 2 },
171 	{ CMD_RESET_BAT_MINMAX_W, 0 },
172 	{ CMD_READ_LOCATION, 1 },
173 	{ CMD_WRITE_LOCATION, 0 },
174 	{ CMD_GET_FW_HASH, 16 },
175 	{ CMD_SUSPEND_HINT, 0 },
176 	{ CMD_ENABLE_WAKE_TIMER, 0 },
177 	{ CMD_SET_WAKE_TIMER, 0 },
178 	{ CMD_ENABLE_WAKE_AUTORESET, 0 },
179 	{ CMD_OLS_SET_LIMITS, 0 },
180 	{ CMD_OLS_GET_LIMITS, 4 },
181 	{ CMD_OLS_SET_CEILING, 0 },
182 	{ CMD_OLS_GET_CEILING, 2 },
183 	{ CMD_READ_EXT_SCI_MASK, 2 },
184 	{ CMD_WRITE_EXT_SCI_MASK, 0 },
185 
186 	{ }
187 };
188 
189 #define EC_MAX_CMD_DATA_LEN	5
190 #define EC_MAX_RESP_LEN		16
191 
192 #define LOG_BUF_SIZE		128
193 
194 #define PM_WAKEUP_TIME		1000
195 
196 #define EC_ALL_EVENTS		GENMASK(15, 0)
197 
198 enum ec_state_t {
199 	CMD_STATE_IDLE = 0,
200 	CMD_STATE_WAITING_FOR_SWITCH,
201 	CMD_STATE_CMD_IN_TX_FIFO,
202 	CMD_STATE_CMD_SENT,
203 	CMD_STATE_RESP_RECEIVED,
204 	CMD_STATE_ERROR_RECEIVED,
205 };
206 
207 struct olpc_xo175_ec_cmd {
208 	u8 command;
209 	u8 nr_args;
210 	u8 data_len;
211 	u8 args[EC_MAX_CMD_DATA_LEN];
212 };
213 
214 struct olpc_xo175_ec_resp {
215 	u8 channel;
216 	u8 byte;
217 };
218 
219 struct olpc_xo175_ec {
220 	bool suspended;
221 
222 	/* SPI related stuff. */
223 	struct spi_device *spi;
224 	struct spi_transfer xfer;
225 	struct spi_message msg;
226 	union {
227 		struct olpc_xo175_ec_cmd cmd;
228 		struct olpc_xo175_ec_resp resp;
229 	} tx_buf, rx_buf;
230 
231 	/* GPIO for the CMD signals. */
232 	struct gpio_desc *gpio_cmd;
233 
234 	/* Command handling related state. */
235 	spinlock_t cmd_state_lock;
236 	int cmd_state;
237 	bool cmd_running;
238 	struct completion cmd_done;
239 	struct olpc_xo175_ec_cmd cmd;
240 	u8 resp_data[EC_MAX_RESP_LEN];
241 	int expected_resp_len;
242 	int resp_len;
243 
244 	/* Power button. */
245 	struct input_dev *pwrbtn;
246 
247 	/* Debug handling. */
248 	char logbuf[LOG_BUF_SIZE];
249 	int logbuf_len;
250 };
251 
252 static struct platform_device *olpc_ec;
253 
254 static int olpc_xo175_ec_resp_len(u8 cmd)
255 {
256 	const struct ec_cmd_t *p;
257 
258 	for (p = olpc_xo175_ec_cmds; p->cmd; p++) {
259 		if (p->cmd == cmd)
260 			return p->bytes_returned;
261 	}
262 
263 	return -EINVAL;
264 }
265 
266 static void olpc_xo175_ec_flush_logbuf(struct olpc_xo175_ec *priv)
267 {
268 	dev_dbg(&priv->spi->dev, "got debug string [%*pE]\n",
269 				priv->logbuf_len, priv->logbuf);
270 	priv->logbuf_len = 0;
271 }
272 
273 static void olpc_xo175_ec_complete(void *arg);
274 
275 static void olpc_xo175_ec_send_command(struct olpc_xo175_ec *priv, void *cmd,
276 								size_t cmdlen)
277 {
278 	int ret;
279 
280 	memcpy(&priv->tx_buf, cmd, cmdlen);
281 	priv->xfer.len = cmdlen;
282 
283 	spi_message_init_with_transfers(&priv->msg, &priv->xfer, 1);
284 
285 	priv->msg.complete = olpc_xo175_ec_complete;
286 	priv->msg.context = priv;
287 
288 	ret = spi_async(priv->spi, &priv->msg);
289 	if (ret)
290 		dev_err(&priv->spi->dev, "spi_async() failed %d\n", ret);
291 }
292 
293 static void olpc_xo175_ec_read_packet(struct olpc_xo175_ec *priv)
294 {
295 	u8 nonce[] = {0xA5, 0x5A};
296 
297 	olpc_xo175_ec_send_command(priv, nonce, sizeof(nonce));
298 }
299 
300 static void olpc_xo175_ec_complete(void *arg)
301 {
302 	struct olpc_xo175_ec *priv = arg;
303 	struct device *dev = &priv->spi->dev;
304 	struct power_supply *psy;
305 	unsigned long flags;
306 	u8 channel;
307 	u8 byte;
308 	int ret;
309 
310 	ret = priv->msg.status;
311 	if (ret) {
312 		dev_err(dev, "SPI transfer failed: %d\n", ret);
313 
314 		spin_lock_irqsave(&priv->cmd_state_lock, flags);
315 		if (priv->cmd_running) {
316 			priv->resp_len = 0;
317 			priv->cmd_state = CMD_STATE_ERROR_RECEIVED;
318 			complete(&priv->cmd_done);
319 		}
320 		spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
321 
322 		if (ret != -EINTR)
323 			olpc_xo175_ec_read_packet(priv);
324 
325 		return;
326 	}
327 
328 	channel = priv->rx_buf.resp.channel;
329 	byte = priv->rx_buf.resp.byte;
330 
331 	switch (channel) {
332 	case CHAN_NONE:
333 		spin_lock_irqsave(&priv->cmd_state_lock, flags);
334 
335 		if (!priv->cmd_running) {
336 			/* We can safely ignore these */
337 			dev_err(dev, "spurious FIFO read packet\n");
338 			spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
339 			return;
340 		}
341 
342 		priv->cmd_state = CMD_STATE_CMD_SENT;
343 		if (!priv->expected_resp_len)
344 			complete(&priv->cmd_done);
345 		olpc_xo175_ec_read_packet(priv);
346 
347 		spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
348 		return;
349 
350 	case CHAN_SWITCH:
351 		spin_lock_irqsave(&priv->cmd_state_lock, flags);
352 
353 		if (!priv->cmd_running) {
354 			/* Just go with the flow */
355 			dev_err(dev, "spurious SWITCH packet\n");
356 			memset(&priv->cmd, 0, sizeof(priv->cmd));
357 			priv->cmd.command = CMD_ECHO;
358 		}
359 
360 		priv->cmd_state = CMD_STATE_CMD_IN_TX_FIFO;
361 
362 		/* Throw command into TxFIFO */
363 		gpiod_set_value_cansleep(priv->gpio_cmd, 0);
364 		olpc_xo175_ec_send_command(priv, &priv->cmd, sizeof(priv->cmd));
365 
366 		spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
367 		return;
368 
369 	case CHAN_CMD_RESP:
370 		spin_lock_irqsave(&priv->cmd_state_lock, flags);
371 
372 		if (!priv->cmd_running) {
373 			dev_err(dev, "spurious response packet\n");
374 		} else if (priv->resp_len >= priv->expected_resp_len) {
375 			dev_err(dev, "too many response packets\n");
376 		} else {
377 			priv->resp_data[priv->resp_len++] = byte;
378 			if (priv->resp_len == priv->expected_resp_len) {
379 				priv->cmd_state = CMD_STATE_RESP_RECEIVED;
380 				complete(&priv->cmd_done);
381 			}
382 		}
383 
384 		spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
385 		break;
386 
387 	case CHAN_CMD_ERROR:
388 		spin_lock_irqsave(&priv->cmd_state_lock, flags);
389 
390 		if (!priv->cmd_running) {
391 			dev_err(dev, "spurious cmd error packet\n");
392 		} else {
393 			priv->resp_data[0] = byte;
394 			priv->resp_len = 1;
395 			priv->cmd_state = CMD_STATE_ERROR_RECEIVED;
396 			complete(&priv->cmd_done);
397 		}
398 		spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
399 		break;
400 
401 	case CHAN_KEYBOARD:
402 		dev_warn(dev, "keyboard is not supported\n");
403 		break;
404 
405 	case CHAN_TOUCHPAD:
406 		dev_warn(dev, "touchpad is not supported\n");
407 		break;
408 
409 	case CHAN_EVENT:
410 		dev_dbg(dev, "got event %.2x\n", byte);
411 		switch (byte) {
412 		case EVENT_AC_CHANGE:
413 			psy = power_supply_get_by_name("olpc_ac");
414 			if (psy) {
415 				power_supply_changed(psy);
416 				power_supply_put(psy);
417 			}
418 			break;
419 		case EVENT_BATTERY_STATUS:
420 		case EVENT_BATTERY_CRITICAL:
421 		case EVENT_BATTERY_SOC_CHANGE:
422 		case EVENT_BATTERY_ERROR:
423 			psy = power_supply_get_by_name("olpc_battery");
424 			if (psy) {
425 				power_supply_changed(psy);
426 				power_supply_put(psy);
427 			}
428 			break;
429 		case EVENT_POWER_PRESSED:
430 			input_report_key(priv->pwrbtn, KEY_POWER, 1);
431 			input_sync(priv->pwrbtn);
432 			input_report_key(priv->pwrbtn, KEY_POWER, 0);
433 			input_sync(priv->pwrbtn);
434 			fallthrough;
435 		case EVENT_POWER_PRESS_WAKE:
436 		case EVENT_TIMED_HOST_WAKE:
437 			pm_wakeup_event(priv->pwrbtn->dev.parent,
438 						PM_WAKEUP_TIME);
439 			break;
440 		default:
441 			dev_dbg(dev, "ignored unknown event %.2x\n", byte);
442 			break;
443 		}
444 		break;
445 
446 	case CHAN_DEBUG:
447 		if (byte == '\n') {
448 			olpc_xo175_ec_flush_logbuf(priv);
449 		} else if (isprint(byte)) {
450 			priv->logbuf[priv->logbuf_len++] = byte;
451 			if (priv->logbuf_len == LOG_BUF_SIZE)
452 				olpc_xo175_ec_flush_logbuf(priv);
453 		}
454 		break;
455 
456 	default:
457 		dev_warn(dev, "unknown channel: %d, %.2x\n", channel, byte);
458 		break;
459 	}
460 
461 	/* Most non-command packets get the TxFIFO refilled and an ACK. */
462 	olpc_xo175_ec_read_packet(priv);
463 }
464 
465 /*
466  * This function is protected with a mutex. We can safely assume that
467  * there will be only one instance of this function running at a time.
468  * One of the ways in which we enforce this is by waiting until we get
469  * all response bytes back from the EC, rather than just the number that
470  * the caller requests (otherwise, we might start a new command while an
471  * old command's response bytes are still incoming).
472  */
473 static int olpc_xo175_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *resp,
474 					size_t resp_len, void *ec_cb_arg)
475 {
476 	struct olpc_xo175_ec *priv = ec_cb_arg;
477 	struct device *dev = &priv->spi->dev;
478 	unsigned long flags;
479 	size_t nr_bytes;
480 	int ret = 0;
481 
482 	dev_dbg(dev, "CMD %x, %zd bytes expected\n", cmd, resp_len);
483 
484 	if (inlen > 5) {
485 		dev_err(dev, "command len %zd too big!\n", resp_len);
486 		return -EOVERFLOW;
487 	}
488 
489 	/* Suspending in the middle of an EC command hoses things badly! */
490 	if (WARN_ON(priv->suspended))
491 		return -EBUSY;
492 
493 	/* Ensure a valid command and return bytes */
494 	ret = olpc_xo175_ec_resp_len(cmd);
495 	if (ret < 0) {
496 		dev_err_ratelimited(dev, "unknown command 0x%x\n", cmd);
497 
498 		/*
499 		 * Assume the best in our callers, and allow unknown commands
500 		 * through. I'm not the charitable type, but it was beaten
501 		 * into me. Just maintain a minimum standard of sanity.
502 		 */
503 		if (resp_len > sizeof(priv->resp_data)) {
504 			dev_err(dev, "response too big: %zd!\n", resp_len);
505 			return -EOVERFLOW;
506 		}
507 		nr_bytes = resp_len;
508 	} else {
509 		nr_bytes = (size_t)ret;
510 		ret = 0;
511 	}
512 	resp_len = min(resp_len, nr_bytes);
513 
514 	spin_lock_irqsave(&priv->cmd_state_lock, flags);
515 
516 	/* Initialize the state machine */
517 	init_completion(&priv->cmd_done);
518 	priv->cmd_running = true;
519 	priv->cmd_state = CMD_STATE_WAITING_FOR_SWITCH;
520 	memset(&priv->cmd, 0, sizeof(priv->cmd));
521 	priv->cmd.command = cmd;
522 	priv->cmd.nr_args = inlen;
523 	priv->cmd.data_len = 0;
524 	memcpy(priv->cmd.args, inbuf, inlen);
525 	priv->expected_resp_len = nr_bytes;
526 	priv->resp_len = 0;
527 
528 	/* Tickle the cmd gpio to get things started */
529 	gpiod_set_value_cansleep(priv->gpio_cmd, 1);
530 
531 	spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
532 
533 	/* The irq handler should do the rest */
534 	if (!wait_for_completion_timeout(&priv->cmd_done,
535 			msecs_to_jiffies(4000))) {
536 		dev_err(dev, "EC cmd error: timeout in STATE %d\n",
537 				priv->cmd_state);
538 		gpiod_set_value_cansleep(priv->gpio_cmd, 0);
539 		spi_slave_abort(priv->spi);
540 		olpc_xo175_ec_read_packet(priv);
541 		return -ETIMEDOUT;
542 	}
543 
544 	spin_lock_irqsave(&priv->cmd_state_lock, flags);
545 
546 	/* Deal with the results. */
547 	if (priv->cmd_state == CMD_STATE_ERROR_RECEIVED) {
548 		/* EC-provided error is in the single response byte */
549 		dev_err(dev, "command 0x%x returned error 0x%x\n",
550 						cmd, priv->resp_data[0]);
551 		ret = -EREMOTEIO;
552 	} else if (priv->resp_len != nr_bytes) {
553 		dev_err(dev, "command 0x%x returned %d bytes, expected %zd bytes\n",
554 						cmd, priv->resp_len, nr_bytes);
555 		ret = -EREMOTEIO;
556 	} else {
557 		/*
558 		 * We may have 8 bytes in priv->resp, but we only care about
559 		 * what we've been asked for. If the caller asked for only 2
560 		 * bytes, give them that. We've guaranteed that
561 		 * resp_len <= priv->resp_len and priv->resp_len == nr_bytes.
562 		 */
563 		memcpy(resp, priv->resp_data, resp_len);
564 	}
565 
566 	/* This should already be low, but just in case. */
567 	gpiod_set_value_cansleep(priv->gpio_cmd, 0);
568 	priv->cmd_running = false;
569 
570 	spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
571 
572 	return ret;
573 }
574 
575 static int olpc_xo175_ec_set_event_mask(unsigned int mask)
576 {
577 	u8 args[2];
578 
579 	args[0] = mask >> 0;
580 	args[1] = mask >> 8;
581 	return olpc_ec_cmd(CMD_WRITE_EXT_SCI_MASK, args, 2, NULL, 0);
582 }
583 
584 static void olpc_xo175_ec_power_off(void)
585 {
586 	while (1) {
587 		olpc_ec_cmd(CMD_POWER_OFF, NULL, 0, NULL, 0);
588 		mdelay(1000);
589 	}
590 }
591 
592 static int __maybe_unused olpc_xo175_ec_suspend(struct device *dev)
593 {
594 	struct olpc_xo175_ec *priv = dev_get_drvdata(dev);
595 	static struct {
596 		u8 suspend;
597 		u32 suspend_count;
598 	} __packed hintargs;
599 	static unsigned int suspend_count;
600 
601 	/*
602 	 * SOC_SLEEP is not wired to the EC on B3 and earlier boards.
603 	 * This command lets the EC know instead. The suspend count doesn't seem
604 	 * to be used anywhere but in the EC debug output.
605 	 */
606 	hintargs.suspend = 1;
607 	hintargs.suspend_count = suspend_count++;
608 	olpc_ec_cmd(CMD_SUSPEND_HINT, (void *)&hintargs, sizeof(hintargs),
609 								NULL, 0);
610 
611 	/*
612 	 * After we've sent the suspend hint, don't allow further EC commands
613 	 * to be run until we've resumed. Userspace tasks should be frozen,
614 	 * but kernel threads and interrupts could still schedule EC commands.
615 	 */
616 	priv->suspended = true;
617 
618 	return 0;
619 }
620 
621 static int __maybe_unused olpc_xo175_ec_resume_noirq(struct device *dev)
622 {
623 	struct olpc_xo175_ec *priv = dev_get_drvdata(dev);
624 
625 	priv->suspended = false;
626 
627 	return 0;
628 }
629 
630 static int __maybe_unused olpc_xo175_ec_resume(struct device *dev)
631 {
632 	u8 x = 0;
633 
634 	/*
635 	 * The resume hint is only needed if no other commands are
636 	 * being sent during resume. all it does is tell the EC
637 	 * the SoC is definitely awake.
638 	 */
639 	olpc_ec_cmd(CMD_SUSPEND_HINT, &x, 1, NULL, 0);
640 
641 	/* Enable all EC events while we're awake */
642 	olpc_xo175_ec_set_event_mask(EC_ALL_EVENTS);
643 
644 	return 0;
645 }
646 
647 static struct olpc_ec_driver olpc_xo175_ec_driver = {
648 	.ec_cmd = olpc_xo175_ec_cmd,
649 };
650 
651 static void olpc_xo175_ec_remove(struct spi_device *spi)
652 {
653 	if (pm_power_off == olpc_xo175_ec_power_off)
654 		pm_power_off = NULL;
655 
656 	spi_slave_abort(spi);
657 
658 	platform_device_unregister(olpc_ec);
659 	olpc_ec = NULL;
660 }
661 
662 static int olpc_xo175_ec_probe(struct spi_device *spi)
663 {
664 	struct olpc_xo175_ec *priv;
665 	int ret;
666 
667 	if (olpc_ec) {
668 		dev_err(&spi->dev, "OLPC EC already registered.\n");
669 		return -EBUSY;
670 	}
671 
672 	priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
673 	if (!priv)
674 		return -ENOMEM;
675 
676 	priv->gpio_cmd = devm_gpiod_get(&spi->dev, "cmd", GPIOD_OUT_LOW);
677 	if (IS_ERR(priv->gpio_cmd)) {
678 		dev_err(&spi->dev, "failed to get cmd gpio: %ld\n",
679 					PTR_ERR(priv->gpio_cmd));
680 		return PTR_ERR(priv->gpio_cmd);
681 	}
682 
683 	priv->spi = spi;
684 
685 	spin_lock_init(&priv->cmd_state_lock);
686 	priv->cmd_state = CMD_STATE_IDLE;
687 	init_completion(&priv->cmd_done);
688 
689 	priv->logbuf_len = 0;
690 
691 	/* Set up power button input device */
692 	priv->pwrbtn = devm_input_allocate_device(&spi->dev);
693 	if (!priv->pwrbtn)
694 		return -ENOMEM;
695 	priv->pwrbtn->name = "Power Button";
696 	priv->pwrbtn->dev.parent = &spi->dev;
697 	input_set_capability(priv->pwrbtn, EV_KEY, KEY_POWER);
698 	ret = input_register_device(priv->pwrbtn);
699 	if (ret) {
700 		dev_err(&spi->dev, "error registering input device: %d\n", ret);
701 		return ret;
702 	}
703 
704 	spi_set_drvdata(spi, priv);
705 
706 	priv->xfer.rx_buf = &priv->rx_buf;
707 	priv->xfer.tx_buf = &priv->tx_buf;
708 
709 	olpc_xo175_ec_read_packet(priv);
710 
711 	olpc_ec_driver_register(&olpc_xo175_ec_driver, priv);
712 	olpc_ec = platform_device_register_resndata(&spi->dev, "olpc-ec", -1,
713 							NULL, 0, NULL, 0);
714 
715 	/* Enable all EC events while we're awake */
716 	olpc_xo175_ec_set_event_mask(EC_ALL_EVENTS);
717 
718 	if (pm_power_off == NULL)
719 		pm_power_off = olpc_xo175_ec_power_off;
720 
721 	dev_info(&spi->dev, "OLPC XO-1.75 Embedded Controller driver\n");
722 
723 	return 0;
724 }
725 
726 static const struct dev_pm_ops olpc_xo175_ec_pm_ops = {
727 	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, olpc_xo175_ec_resume_noirq)
728 	SET_RUNTIME_PM_OPS(olpc_xo175_ec_suspend, olpc_xo175_ec_resume, NULL)
729 };
730 
731 static const struct of_device_id olpc_xo175_ec_of_match[] = {
732 	{ .compatible = "olpc,xo1.75-ec" },
733 	{ }
734 };
735 MODULE_DEVICE_TABLE(of, olpc_xo175_ec_of_match);
736 
737 static const struct spi_device_id olpc_xo175_ec_id_table[] = {
738 	{ "xo1.75-ec", 0 },
739 	{}
740 };
741 MODULE_DEVICE_TABLE(spi, olpc_xo175_ec_id_table);
742 
743 static struct spi_driver olpc_xo175_ec_spi_driver = {
744 	.driver = {
745 		.name	= "olpc-xo175-ec",
746 		.of_match_table = olpc_xo175_ec_of_match,
747 		.pm = &olpc_xo175_ec_pm_ops,
748 	},
749 	.probe		= olpc_xo175_ec_probe,
750 	.remove		= olpc_xo175_ec_remove,
751 };
752 module_spi_driver(olpc_xo175_ec_spi_driver);
753 
754 MODULE_DESCRIPTION("OLPC XO-1.75 Embedded Controller driver");
755 MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); /* Functionality */
756 MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); /* Bugs */
757 MODULE_LICENSE("GPL");
758